DragonFly On-Line Manual Pages
AMANDA-CLIENT.CON(5) File formats and conventions AMANDA-CLIENT.CON(5)
NAME
amanda-client.conf - Client configuration file for Amanda, the Advanced
Maryland Automatic Network Disk Archiver
DESCRIPTION
amanda-client.conf(5) is the client configuration file for Amanda. This
manpage lists the relevant sections and parameters of this file for
quick reference.
The files <CONFIG_DIR>/amanda-client.conf and
<CONFIG_DIR>/<config>/amanda-client.conf are loaded.
SYNTAX
The syntax of amanda-client.conf(5) is identical to that for
amanda.conf(5).
GLOBAL PARAMETERS
conf string
Default: Set by configure. The conf use by amrecover.
client-username string
Default: CLIENT_LOGIN. Similar to the parameter of the same name in
amanda.conf(5), this specifies the username that amrecover should
send when connecting to the server. It should match the username
specified in .amandahosts on the server.
client-port [ int | string ]
Default: "amanda". Similar to the parameter of the same name in
amanda.conf(5), this specifies the port to connect on the server.
It can be a service name or a numeric port number.
amdump-server string
No default: Set by configure. The amanda server to connect with the
amdump_client program.
index-server string
Default: Set by configure. The amindexd server amrecover will
connect to.
tape-server string
Default: Set by configure. The amidxtaped server amrecover will
connect to.
tapedev string
Default: Set by configure. The tapedev amrecover will use.
auth string
Default: "bsdtcp". Type of authorization to perform between tape
server and backup client hosts.
"bsd", bsd authorization with udp initial connection and one tcp
connection by data stream.
"bsdtcp", bsd authorization but use only one tcp connection.
"bsdudp", like bsd, but will use only one tcp connection for all
data stream.
"krb5" to use Kerberos-V authorization.
"local", if the client is the server, it doesn't require
authencation setup.
"rsh" to use rsh authorization.
"ssh" to use OpenSSH authorization.
ssh-keys string
Default: No default. The key file the ssh auth will use, it must be
the private key. If this parameter is not specified, then the
default ssh key will be used.
gnutar-list-dir string
Default from configure --with-gnutar-listdir=DIR. The directory
where gnutar keep its state file.
mailer string
Default found by configure. A mail program that can send mail with
'MAILER -s "subject" user < message_file'.
amandates string
Default: /etc/amandates. The file where amanda keep the last date
of each dumplevel.
connect-tries int
Default: 3. How many times the server will try a connection.
rep-tries int
Default: 5. How many times amandad will resend a REP packet if it
doesn't get the ACK packet.
debug-days int
Default: 3. The number of days the debug files are kept.
debug-amandad int
Default: 0. Debug level of the amandad process
debug-amidxtaped int
Default: 0. Debug level of the amidxtaped process
debug-amindexd int
Default: 0. Debug level of the amindexd process
debug-amrecover int
Default: 0. Debug level of the amrecover process
debug-auth int
Default: 0. Debug level of the auth module
debug-event int
Default: 0. Debug level of the event module
debug-holding int
Default: 0. Debug level of the holdingdisk module
debug-protocol int
Default: 0. Debug level of the protocol module
debug-selfcheck int
Default: 0. Debug level of the selfcheck process
debug-sendsize int
Default: 0. Debug level of the sendsize process
debug-sendbackup int
Default: 0. Debug level of the sendbackup process
reserved-udp-port int,int
Default: --with-udpportrange or 512,1023. Reserved udp port that
will be used (amrecover with bsd or bsdudp)
reserved-tcp-port int,int
Default: --with-low-tcpportrange or 512,1023. Reserved tcp port
that will be used (amrecover with bsdtcp)
unreserved-tcp-port int,int
Default: --with-tcpportrange or 1025,65536. Unreserved tcp port
that will be used (bsd, bsdudp)
property string string+
Adds a global property for this client host, useful for e.g.,
Application API plugins. The first string is the property name, the
following strings are the property values
APPLICATION SECTION
The amanda-client.conf file may define multiple types of application.
The information is entered in a application section, which looks like
this:
define application "name" {
application-option application-value
...
}
name is the name of this type of application.
The setting from an application is merged with the dle setting if the
name is the same as the client-application-name from the dle or if the
client-application-name from the dle is not set and the name is the
same as the plugin from the dle.
The application options and values are:
client-application-name string
Default: none. Not use on the client.
comment string
Default: none. A comment string describing this application.
plugin string
No default. Must be set to the name of the program. This program
must be in the $libexecdir/amanda/application directory on the
client. If set, it must be the same as the dle plugin.
property [append] [priority] string string+
No default. You can set property for the application, each
application have a different set of property. Both strings are
quoted; the first string contains the name of the property to set,
and the others contains its values. append keyword append the
values to the list of values for that property. priority keyword
disallow the setting of that property on the server.
SCRIPT SECTION
The amanda-client.conf file may define multiple types of script. The
information is entered in a script section, which looks like this:
define script "name" {
script-option script-value
...
}
name is the name of this type of script.
The setting from a script is merged with the dle setting if the name is
the same as the client-script-name from the dle or if the
client-script-name from the dle is not set and the name is the same as
the plugin from the dle.
The script options and values are:
client-script-name string
Default: none. Not used on the client.
comment string
Default: none. A comment string describing this script.
plugin string
No default. Must be set to the name of the program. This program
must be in the $libdir/amanda/application directory on the client.
If set, it must be the same as the dle plugin.
execute-where client
Default: client. Value can't be changed.
execute-on execute_on[,execute_on]*
No default. When the script must be executed, you can specify many
of them:
pre-dle-amcheck
Execute before the amcheck command for the dle.
pre-host-amcheck
Execute before the amcheck command for all dle for the client.
post-dle-amcheck
Execute after the amcheck command for the dle.
post-host-amcheck
Execute after the amcheck command for all dle for the client.
pre-dle-estimate
Execute before the estimate command for the dle.
pre-host-estimate
Execute before the estimate command for all dle for the client.
post-dle-estimate
Execute after the estimate command for the dle.
post-host-estimate
Execute after the estimate command for all dle for the client.
pre-dle-backup
Execute before the backup command for the dle.
post-dle-backup
Execute after the backup command for the dle.
pre-recover
Execute before any level is recovered.
post-recover
Execute after all levels are recovered.
pre-level-recover
Execute before each level recovery.
post-level-recover
Execute after each level recovery.
inter-level-recover
Execute between two levels of recovery.
property [append] [priority] string string+
No default. You can set property for the script, each script have a
different set of property. Both strings are quoted; the first
string contains the name of the property to set, and the others
contains its values. append keyword append the values to the list
of values for that property. priority keyword disallow the setting
of that property on the server.
SEE ALSO
amanda(8), amanda.conf(5), amcrypt(8), aespipe(1)
The Amanda Wiki: : http://wiki.zmanda.com/
AUTHORS
James da Silva <jds@amanda.org>
Stefan G. Weichinger <sgw@amanda.org>
Amanda 3.3.6 07/09/2014 AMANDA-CLIENT.CON(5)