DragonFly On-Line Manual Pages
asmtpd(8) Mail Avenger 0.8.4 asmtpd(8)
NAME
asmtpd - Avenger SMTP Daemon
SYNOPSIS
asmtpd [-d] [--verbose] [-f config-file]
asmtpd [--spf] [-f config-file]
asmtpd [--rbl] [-f config-file]
asmtpd [--avenge] [-f config-file] recipient [sender [IP-address]]
asmtpd [--synfp] [tcp-port [IP-address [interface ...]]]
asmtpd [--netpath] IP-address [network-hops]
DESCRIPTION
asmtpd is the central server daemon for Mail Avanger. Mail Avenger is
a highly-configurable MTA-independent SMTP (Simple Mail Transport
Protocol) server designed to let you filter and fight SPAM before
accepting incoming mail from a client machine. Filtering spam before
accepting a message from a remote machine offers a number of benefits.
First, while mail is in the process of being sent over the network,
more information is available about the client machine, allowing the
possibility of more accurate decisions about spam. (For example,
machines infected with viruses may be able to be detected by probing.)
Second, filtering during mail transfer allows more options for what to
do with potential spam. For instance, one can defer the
mail--essentially asking the client to send it again later--which
legitimate mail clients will do automatically, but "spam 'bots"
typically won't. Moreover, it is much safer to reject spam before
accepting a message. With typical after-delivery spam checkers, the
only options are to discard spam silently (risking false positives that
completely disappear), or to notify the sender, but if the sender is
forged, this causes more unwanted mail. By rejecting mail during an
SMTP transaction, this ensures legitimate mail gets bounced to the
sender, while most spam will simply disappear.
Finally, filtering during an SMTP transaction saves resources, since
spam messages need never to be spooled in the mail queue.
There are many ways of fighting and detecting spam. Though Mail
Avenger has a few basic mechanisms built-in, the philosophy of the
system is to let system administrators and individual users plug in
their own filtering criteria. The intent is for Mail Avenger to do the
hard part--talk the SMTP network protocol, handle asynchronous DNS
resolution, SPF rule checking, probing of remote SMTP servers for
legitimacy, etc.--while users can set policy through configuration
files with simple shell commands.
The basic approach is for users to create scripts in a directory called
$HOME/.avenger that specify policies for what mail to accept and what
to reject or defer. System-wide fallback policies can also be
specified by files in /etc/avenger/. The program that executes these
scripts is called avenger, and is described more fully in its own
manual page.
asmtpd can be configured to map different email addresses and domains
to different local users, in addition to a large number of other
configurable features. These are described more fully in the
asmtpd.conf(5) manual page.
asmtpd also adds a new header field to messages, "X-Avenger:",
containing information that may be of use to spam filters.
"X-Avenger:" contains a list of semi-colon-separated tokens, which if
present mean the following:
version=number
Specifies the version of Mail Avenger that received the message.
receiver=hostname
Specifies that asmtpd was running on hostname when it received the
message.
client-ip=IP-address
client-port=port-number
These specify that the client end of the TCP connection from which
the mail came used IP address IP-address and port port-number.
client-dnsfail=error
Specifies that a reverse lookup on the client's IP address (to
determine the client's hostname) resulted in error.
bounce-res=code
Specifies that attempts to send bounces to the bounce address of
the sender result in SMTP error code. (This is the same value as
the SENDER_BOUNCERES environment variable described in the
avenger(1) manual page.)
syn-fingerprint=fingerprint
Contains a description of the initial TCP SYN packet used by the
client to initiate the TCP connection over which the mail was sent.
See the description of CLIENT_SYNFP in the avenger(1) manual page
for an explanation of the format.
colon-space
If present, means the client included a space between the colon in
the command "MAIL FROM:" or "RCPT TO:" and the subsequent "<" that
begins an email address.
eager-pipelining
If present, means that the client attempted to pipeline SMTP
commands before receiving the "250 PIPELINING" response to the SMTP
"HELO" or "EHLO" command. This field has the same meaning as the
CLIENT_PIPELINING environment variable in avenger(1).
post
If present, means the client issued the invalid SMTP command POST.
See CLIENT_POST in avenger(1).
network-hops=nhops
This is the number of network hops from the server to the client
that sent this mail (if Mail Avenger can figure this out). See
CLIENT_NETHOPS in avenger(1).
network-path=IP-list
Set to a space-separated list of as many intermediary network hops
as Mail Avenger can efficiently discover on the way from the server
to the client that send the mail. See CLIENT_NETHOPS in
avenger(1).
network-path-time=time
To save network traffic, Mail Avenger briefly caches routes to a
particular client. network-path-time specifies the precise time at
which the information in network-path was discovered. The time is
expressed as a standard Unix time (number of seconds since Jan 1,
1970).
RBL=domain (IP-addrs)[, domain (IP-addrs), ...]
For the each real-time blackhole list (RBL) domain specified in
asmtpd.conf (see the RBL directive in the asmtpd.conf(5) man page),
if the client shows up in the RBL, IP-addrs specifies what the RBL
returns.
Usually, RBLs just return 127.0.0.1 to specify that a client is
present in the blacklist. However, some services use different IP
addresses to encode some information about why the client is
listed. If an RBL returns multiple IP addresses, asmtpd includes
them all, separated by spaces.
RBL-errors=domain (error)[, domain (error), ...]
Lists any RBL domains Mail Avenger was unable to query at the time
of receipt of the message.
GETTING STARTED
The following is a brief description of how to get started with asmtpd.
More information is available in the installation guide
/usr/local/share/avenger/INSTALL, as well as the asmtpd.conf(5) and
avenger(1) manual pages.
o If you haven't already, create a user called avenger on your
system. This is the user ID under which system-wide avenger
scripts will run. (If you wish to use a name other than "avenger",
you can put the directive "AvengerUser user" in the asmtpd.conf
configuration file when you create that.)
o Create the directory /etc/avenger.
o Create a file /etc/avenger/asmtpd.conf. Copy the sample file in
/usr/local/share/avenger/asmtpd.conf and edit to taste.
o Create a file /etc/avenger/domains. List each domain for which you
would like to receive mail, followed by a colon, one per line. For
example:
my.first.domain:
my.second.domain:
o Fire it up! Run the command "asmtpd" as root. You may also want
to set things up to run this command automatically on system
startup.
o Play with scripts. Read the man page for avenger(1), create a
.avenger/rcpt file in your home directory, and maybe create a site-
wide default file /etc/avenger/default. You will also very likely
want to create a script /etc/avenger/unknown to reject mail to
unknown users. See the man page for aliascheck(1) and the sample
/usr/local/share/avenger/unknown for an example of how to do this.
o Finally, you may want to try the avenger.local delivery agent. See
the avenger.local(8) man page for more information.
OPTIONS
Normally, when started, asmtpd runs as a daemon, sends its output to
the system log, and looks for its configuration file in
/etc/avenger/asmtpd.conf. The following options change this behavior:
-d Tells asmtpd to stay in the foreground and send its diagnostic
messages to standard error, rather than to the system log.
--verbose
Ordinarily, asmtpd will attempt to avoid sending overly many
duplicate copies of a message to the system log file. The
--verbose option changes this behavior, so that certain error
conditions (such as missing directories) get reported each time
they affect a piece of mail.
-f config-file
Specifies an alternate location for the configuration file.
In addition, several other options are available to run asmtpd in
various test modes, for making use of or debugging features.
--spf [-f config-file]
Runs in a mode where asmtpd simply performs SPF tests on
<IP-address, sender> pairs it reads from standard input. Can be
used to validate asmtpd's SPF implementation against a different
implementation, or to debug SPF records (particularly in
conjunction with the SPF_TRACE environment variable discussed
below).
--rbl [-f config-file]
Tests asmtpd's RBL (realtime black hole) list implementation. The
configuration file should contain one or more RBL directives (see
the manual page for asmtpd.conf(5)). In this mode, asmtpd will
simply read IP addresses from its input and output the result of
RBL checks.
--avenge [-f config-file] recipient [sender [IP-address]]
Tests the avenger script for recipient, which must be a fully-
qualified email address with a domain. This simulates an SMTP
transaction in which client IP-address tries to send mail from
sender to recipient. If recipient is not specified, it defaults to
postmaster@HostName (where Hostname is the local hostname, as
specified in asmtpd.conf). If <IP-address> is not specified, the
local address is used.
With this option, asmtpd will log a transcript of avenger's
requests to standard error, regardless of the actual DebugAvenger
setting. At the end, outputs the SMTP response asmtpd would give
to the "RCPT" command.
--synfp [tcp-port [IP-address [interface ...]]]
Tests asmtpd's SYN fingerprinting implementation. Listens to the
network and for each incoming TCP connection, prints the IP address
and port of the client, along with a fingerprint describing the
characteristics of the initial SYN packet from the TCP connection.
(For a description of the SYN fingerprint format, see the
description of CLIENT_SYNFP in the man page for avenger(1).)
By default, asmtpd will print the fingerprints of any incoming TCP
connection. If tcp-port is non-zero, however, asmtpd will only
consider SYN packets sent to that TCP port number. If IP-address
is supplied and is not 0.0.0.0, asmtpd will only took at TCP
packets for that particular IP address (useful if your local
machine has multiple IP addresses). Finally, by default asmtpd
will listen to whatever network interfaces correspond to IP-address
(or all active non-loopback interfaces for 0.0.0.0 or unspecified).
You can alternatively specify explicitly which network interfaces
asmtpd should listen on (e.g., "eth0 eth1").
To use this option, you must be root (or at least have permission
to open the /dev/bpf* packet filter devices on your machine).
--netpath IP-address [network-hops]
asmtpd records the network path to mail clients using a technique
similar to the traceroute utility found on many operating systems.
The --netpath option tests asmtpd's implementation of this
functionality. If network-hops is positive, asmtpd will record
only the first network-hops hops on the way to IP-address. If
network-hops is negative, asmtpd will output only the last network-
hops hops on the way to IP-address. If network-hops is zero, or is
not supplied, asmtpd will output the entire route (or as much as it
can discover, firewall permitting).
To use this option, you must run asmtpd as root for it to use raw
sockets.
ENVIRONMENT
SPF_TRACE
When set to a positive integer, causes asmtpd to send to standard
error a trace of the checks it is performing while processing SPF
records. If set to 1, simply records which SPF traces are
happening. Setting it to 2 provides more information, while
setting it to 3 provides a complete trace. (Setting the value to 4
or higher additionally causes asmtpd to send the results of all
SPF-related DNS queries to its standard output, a feature mostly
useful to the implementor.)
TMPDIR
asmtpd creates temporary files to hold incoming mail messages
before injecting them into the mail system. It usually creates a
temporary subdirectory of /var/tmp to hold these files (and cleans
up the directory on exit). If TMPDIR is set, its value will be
used in place of /var/tmp.
FILES
/etc/avenger/asmtpd.conf, /etc/avenger/domains, /etc/avenger/aliases,
/etc/avenger/unknown, /etc/avenger/default, $HOME/.avenger/rcpt*
/usr/local/share/avenger/*
SEE ALSO
asmtpd.conf(5), avenger(1)
The Mail Avenger home page: <http://www.mailavenger.org/>.
BUGS
If the packet capture library (libpcap) header files were not available
at compile time, asmtpd will not support TCP SYN fingerprints and the
--synfp option will not be available. You may be able to fix this by
installing a package for your OS called pcap, libpcap, or libpcap-devel
(depending on the distribution), then re-running ./configure and re-
compiling Mail Avenger.
AUTHOR
David Mazieres
Mail Avenger 0.8.4 2013-07-13 asmtpd(8)