DragonFly On-Line Manual Pages
CMAKE-CONFIGURE-LOG(7) CMake CMAKE-CONFIGURE-LOG(7)
NAME
cmake-configure-log - CMake Configure Log
New in version 3.26.
INTRODUCTION
CMake writes a running log, known as the configure log, of certain
events that occur during the Configure step. The configure log does
not contain a log of all output, errors, or messages printed while
configuring a project. It is a log of detailed information about
specific events, such as toolchain inspection by try_compile(), meant
for use in debugging the configuration of a build tree.
For human use, this version of CMake writes the configure log to the
file:
${CMAKE_BINARY_DIR}/CMakeFiles/CMakeConfigureLog.yaml
However, the location and name of the log file may change in future
versions of CMake. Tools that read the configure log should get its
location using a configureLog query to the cmake-file-api(7). See the
Log Versioning section below for details.
LOG STRUCTURE
The configure log is designed to be both machine- and human-readable.
The log file is a YAML document stream containing zero or more YAML
documents separated by document markers. Each document begins with a
--- document marker line, contains a single YAML mapping that logs
events from one CMake "configure" step, and, if the configure step
finished normally, ends with a ... document marker line:
---
events:
-
kind: "try_compile-v1"
# (other fields omitted)
-
kind: "try_compile-v1"
# (other fields omitted)
...
A new document is appended to the log every time CMake configures the
build tree and logs new events.
The keys of the each document root mapping are:
events A YAML block sequence of nodes corresponding to events logged
during one CMake "configure" step. Each event is a YAML node
containing one of the Event Kinds documented below.
Log Versioning
Each of the Event Kinds is versioned independently. The set of keys an
event's log entry provides is specific to its major version. When an
event is logged, the latest version of its event kind that is known to
the running version of CMake is always written to the log.
Tools reading the configure log must ignore event kinds and versions
they do not understand:
o A future version of CMake may introduce a new event kind or version.
o If an existing build tree is re-configured with a different version
of CMake, the log may contain different versions of the same event
kind.
o If cmake-file-api(7) queries request one or more configureLog object
versions, the log may contain multiple entries for the same event,
each with a different version of its event kind.
IDEs should write a cmake-file-api(7) query requesting a specific
configureLog object version, before running CMake, and then read the
configure log only as described by the file-api reply.
Text Block Encoding
In order to make the log human-readable, text blocks are always
represented using YAML literal block scalars (|). Since literal block
scalars do not support escaping, backslashes and non-printable
characters are encoded at the application layer:
o \\ encodes a backslash.
o \xXX encodes a byte using two hexadecimal digits, XX.
EVENT KINDS
Every event kind is represented by a YAML mapping of the form:
kind: "<kind>-v<major>"
backtrace:
- "<file>:<line> (<function>)"
checks:
- "Checking for something"
#...event-specific keys...
The keys common to all events are:
kind A string identifying the event kind and major version.
backtrace
A YAML block sequence reporting the call stack of CMake source
locations at which the event occurred, from most-recent to
least-recent. Each node is a string specifying one location
formatted as <file>:<line> (<function>).
checks An optional key that is present when the event occurred with at
least one pending message(CHECK_START). Its value is a YAML
block sequence reporting the stack of pending checks, from
most-recent to least-recent. Each node is a string containing a
pending check message.
Additional mapping keys are specific to each (versioned) event kind,
described below.
Event Kind message
The message(CONFIGURE_LOG) command logs message events.
There is only one message event major version, version 1.
message-v1 Event
A message-v1 event is a YAML mapping:
kind: "message-v1"
backtrace:
- "CMakeLists.txt:123 (message)"
checks:
- "Checking for something"
message: |
# ...
The keys specific to message-v1 mappings are:
message
A YAML literal block scalar containing the message text,
represented using our Text Block Encoding.
Event Kind try_compile
The try_compile() command logs try_compile events.
There is only one try_compile event major version, version 1.
try_compile-v1 Event
A try_compile-v1 event is a YAML mapping:
kind: "try_compile-v1"
backtrace:
- "CMakeLists.txt:123 (try_compile)"
checks:
- "Checking for something"
description: "Explicit LOG_DESCRIPTION"
directories:
source: "/path/to/.../TryCompile-01234"
binary: "/path/to/.../TryCompile-01234"
cmakeVariables:
SOME_VARIABLE: "Some Value"
buildResult:
variable: "COMPILE_RESULT"
cached: true
stdout: |
# ...
exitCode: 0
The keys specific to try_compile-v1 mappings are:
description
An optional key that is present when the LOG_DESCRIPTION <text>
option was used. Its value is a string containing the
description <text>.
directories
A mapping describing the directories associated with the
compilation attempt. It has the following keys:
source String specifying the source directory of the
try_compile() project.
binary String specifying the binary directory of the
try_compile() project. For non-project invocations, this
is often the same as the source directory.
cmakeVariables
An optional key that is present when CMake propagates variables
into the test project, either automatically or due to the
CMAKE_TRY_COMPILE_PLATFORM_VARIABLES variable. Its value is a
mapping from variable names to their values.
buildResult
A mapping describing the result of compiling the test code. It
has the following keys:
variable
A string specifying the name of the CMake variable
storing the result of trying to build the test project.
cached A boolean indicating whether the above result variable is
stored in the CMake cache.
stdout A YAML literal block scalar containing the output from
building the test project, represented using our Text
Block Encoding. This contains build output from both
stdout and stderr.
exitCode
An integer specifying the build tool exit code from
trying to build the test project.
Event Kind try_run
The try_run() command logs try_run events.
There is only one try_run event major version, version 1.
try_run-v1 Event
A try_run-v1 event is a YAML mapping:
kind: "try_run-v1"
backtrace:
- "CMakeLists.txt:456 (try_run)"
checks:
- "Checking for something"
description: "Explicit LOG_DESCRIPTION"
directories:
source: "/path/to/.../TryCompile-56789"
binary: "/path/to/.../TryCompile-56789"
buildResult:
variable: "COMPILE_RESULT"
cached: true
stdout: |
# ...
exitCode: 0
runResult:
variable: "RUN_RESULT"
cached: true
stdout: |
# ...
stderr: |
# ...
exitCode: 0
The keys specific to try_run-v1 mappings include those documented by
the try_compile-v1 event, plus:
runResult
A mapping describing the result of running the test code. It
has the following keys:
variable
A string specifying the name of the CMake variable
storing the result of trying to run the test executable.
cached A boolean indicating whether the above result variable is
stored in the CMake cache.
stdout An optional key that is present when the test project
built successfully. Its value is a YAML literal block
scalar containing output from running the test
executable, represented using our Text Block Encoding.
If RUN_OUTPUT_VARIABLE was used, stdout and stderr are
captured together, so this will contain both. Otherwise,
this will contain only the stdout output.
stderr An optional key that is present when the test project
built successfully and the RUN_OUTPUT_VARIABLE option was
not used. Its value is a YAML literal block scalar
containing output from running the test executable,
represented using our Text Block Encoding.
If RUN_OUTPUT_VARIABLE was used, stdout and stderr are
captured together in the stdout key, and this key will
not be present. Otherwise, this will contain the stderr
output.
exitCode
An optional key that is present when the test project
built successfully. Its value is an integer specifying
the exit code, or a string containing an error message,
from trying to run the test executable.
COPYRIGHT
2000-2023 Kitware, Inc. and Contributors
3.26.1 September 28, 2023 CMAKE-CONFIGURE-LOG(7)