DragonFly On-Line Manual Pages
DMSETUP(8) MAINTENANCE COMMANDS DMSETUP(8)
NAME
dmsetup - low level logical volume management
SYNOPSIS
dmsetup help [-c|-C|--columns]
dmsetup create device_name [-u uuid] [--notable | --table <table> |
table_file]
dmsetup remove [-f|--force] device_name
dmsetup remove_all [-f|--force]
dmsetup suspend [--nolockfs] [--noflush] device_name
dmsetup resume device_name
dmsetup load device_name [--table <table> | table_file]
dmsetup clear device_name
dmsetup reload device_name [--table <table> | table_file]
dmsetup rename device_name new_name
dmsetup message device_name sector message
dmsetup ls [--target target_type] [--exec command] [--tree [-o
options]]
dmsetup info [device_name]
dmsetup info -c|-C|--columns [--noheadings] [--separator separator] [-o
fields] [-O|--sort sort_fields] [device_name]
dmsetup deps [device_name]
dmsetup status [--target target_type] [device_name]
dmsetup table [--target target_type] [device_name]
dmsetup wait device_name [event_nr]
dmsetup mknodes [device_name]
dmsetup targets
dmsetup version
dmsetup setgeometry device_name cyl head sect start
devmap_name major minor
devmap_name major:minor
DESCRIPTION
dmsetup manages logical devices that use the device-mapper driver.
Devices are created by loading a table that specifies a target for each
sector (512 bytes) in the logical device.
The first argument to dmsetup is a command. The second argument is the
logical device name or uuid.
Invoking the command as devmap_name is equivalent to
dmsetup info -c --noheadings -j major -m minor.
OPTIONS
-c|-C|--columns
Display output in columns rather than as Field: Value lines.
-j|--major major
Specify the major number.
-m|--minor minor
Specify the minor number.
-n|--noheadings
Suppress the headings line when using columnar output.
--noopencount
Tell the kernel not to supply the open reference count for the
device.
--notable
When creating a device, don't load any table.
-o|--options
Specify which fields to display.
-r|--readonly
Set the table being loaded read-only.
--readahead [+]<sectors>|auto|none
Specify read ahead size in units of sectors. The default value
is "auto" which allows the kernel to choose a suitable value
automatically. The + prefix lets you specify a minimum value
which will not be used if it is smaller than the value chosen by
the kernel. "None" is equivalent to specifying zero.
--table <table>
Specify a one-line table directly on the command line.
-u|--uuid
Specify the uuid.
-v|--verbose [-v|--verbose]
Produce additional output.
--version
Display the library and kernel driver version.
COMMANDS
create device_name [-u uuid] [--notable | --table <table> | table_file]
Creates a device with the given name. If table_file or <table>
is supplied, the table is loaded and made live. Otherwise a
table is read from standard input unless --notable is used. The
optional uuid can be used in place of device_name in subsequent
dmsetup commands. If successful a device will appear as
/dev/device-mapper/<device-name>. See below for information on
the table format.
deps [device_name]
Outputs a list of (major, minor) pairs for devices referenced by
the live table for the specified device.
help [-c|-C|--columns]
Outputs a summary of the commands available, optionally
including the list of report fields.
info [device_name]
Outputs some brief information about the device in the form:
Device name
State: SUSPENDED|ACTIVE, READ-ONLY
Read Ahead count
Tables present: LIVE and/or INACTIVE
Open reference count
Last event sequence number (used by wait)
Major and minor device number
Number of targets in the live table
UUID
info [--noheadings] [--separator separator] [-o fields] [-O|--sort
sort_fields] [device_name]
Output you can customise. Fields are comma-separated and chosen
from the following list: name, major, minor, attr, open,
segments, events, uuid. Attributes are: (L)ive, (I)nactive,
(s)uspended, (r)ead-only, read-(w)rite. Precede the list with
'+' to append to the default selection of columns instead of
replacing it. Precede any sort_field with - for a reverse sort
on that column.
ls [--target target_type] [--exec command] [--tree [-o options]]
List device names. Optionally only list devices that have at
least one target of the specified type. Optionally execute a
command for each device. The device name is appended to the
supplied command. --tree displays dependencies between devices
as a tree. It accepts a comma-separate list of options. Some
specify the information displayed against each node:
device/nodevice; active, open, rw, uuid. Others specify how the
tree is displayed: ascii, utf, vt100; compact, inverted,
notrunc.
load|reload
device_name [--table <table> | table_file]
Loads <table> or table_file into the inactive table slot for
device_name. If neither is supplied, reads a table from
standard input.
message
device_name sector message
Send message to target. If sector not needed use 0.
mknodes
[device_name]
Ensure that the node in /dev/mapper for device_name is correct.
If no device_name is supplied, ensure that all nodes in
/dev/mapper correspond to mapped devices currently loaded by the
device-mapper kernel driver, adding, changing or removing nodes
as necessary.
remove [-f|--force] device_name
Removes a device. It will no longer be visible to dmsetup.
Open devices cannot be removed except with older kernels that
contain a version of device-mapper prior to 4.8.0. In this case
the device will be deleted when its open_count drops to zero.
From version 4.8.0 onwards, if a device can't be removed because
an uninterruptible process is waiting for I/O to return from it,
adding --force will replace the table with one that fails all
I/O, which might allow the process to be killed.
remove_all
[-f|--force]
Attempts to remove all device definitions i.e. reset the driver.
Use with care! From version 4.8.0 onwards, if devices can't be
removed because uninterruptible processess are waiting for I/O
to return from them, adding --force will replace the table with
one that fails all I/O, which might allow the process to be
killed. This also runs mknodes afterwards.
rename device_name new_name
Renames a device.
resume device_name
Un-suspends a device. If an inactive table has been loaded, it
becomes live. Postponed I/O then gets re-queued for processing.
setgeometry
device_name cyl head sect start
Sets the device geometry to C/H/S.
status [--target target_type] [device_name]
Outputs status information for each of the device's targets.
With --target, only information relating to the specified target
type is displayed.
suspend
[--nolockfs] [--noflush] device_name
Suspends a device. Any I/O that has already been mapped by the
device but has not yet completed will be flushed. Any further
I/O to that device will be postponed for as long as the device
is suspended. If there's a filesystem on the device which
supports the operation, an attempt will be made to sync it first
unless --nolockfs is specified. Some targets such as recent
(October 2006) versions of multipath may support the --noflush
option. This lets outstanding I/O that has not yet reached the
device to remain unflushed.
table [--target target_type] [device_name]
Outputs the current table for the device in a format that can be
fed back in using the create or load commands. With --target,
only information relating to the specified target type is
displayed.
targets
Displays the names and versions of the currently-loaded targets.
version
Outputs version information.
wait device_name [event_nr]
Sleeps until the event counter for device_name exceeds event_nr.
Use -v to see the event number returned. To wait until the next
event is triggered, use info to find the last event number.
TABLE FORMAT
Each line of the table specifies a single target and is of the form:
logical_start_sector num_sectors target_type target_args
There are currently three simple target types available together with
more complex optional ones that implement snapshots and mirrors.
linear destination_device start_sector
The traditional linear mapping.
striped
num_stripes chunk_size [destination start_sector]+
Creates a striped area.
e.g. striped 2 32 /dev/hda1 0 /dev/hdb1 0 will map the first
chunk (16k) as follows:
LV chunk 1 -> hda1, chunk 1
LV chunk 2 -> hdb1, chunk 1
LV chunk 3 -> hda1, chunk 2
LV chunk 4 -> hdb1, chunk 2
etc.
error
Errors any I/O that goes to this area. Useful for testing or
for creating devices with holes in them.
EXAMPLES
# A table to join two disks together
0 1028160 linear /dev/hda 0
1028160 3903762 linear /dev/hdb 0
# A table to stripe across the two disks,
# and add the spare space from
# hdb to the back of the volume
0 2056320 striped 2 32 /dev/hda 0 /dev/hdb 0
2056320 2875602 linear /dev/hdb 1028160
ENVIRONMENT VARIABLES
DM_DEV_DIR
The device directory name. Defaults to "/dev" and must be an
absolute path.
AUTHORS
Original version: Joe Thornber (thornber@sistina.com)
SEE ALSO
Device-mapper resource page: http://sources.redhat.com/dm/
Linux Apr 06 2006 DMSETUP(8)