DragonFly On-Line Manual Pages
FREEIPMI_INTERPRET_SEL(5) Configuration FREEIPMI_INTERPRET_SEL(5)
NAME
freeipmi_interpret_sel.conf - specify system event log (SEL)
interpretation rules
DESCRIPTION
The /usr/local/etc/freeipmi/freeipmi_interpret_sel.conf defines how
IPMI system event log entries should be interpreted. IPMI system events
specify a number of states/thresholds when they are read. Based on
those states/thresholds, libraries and tools such as
libipmimonitoring(3) and ipmi-sel(8) can report if an event is "good"
or "bad" via a report of a NOMINAL, WARNING, or CRITICAL state. A
different state can be reported for an event depending on if it is
asserted or deasserted.
Each of the states listed below are (hopefully) descriptive enough to
describe the state conditions that may be set/unset for each sensor or
event type. For more detailed information on each of the individual
states listed below, please see the IPMI Specification "Sensor and
Event Code Tables". Ipmi-sensors(8) can be used to determine the
sensor types and the states/thresholds that exist on a system by
outputting very verbose output and seeing what types of Assertion or
Deassertion events are possible.
Each of the events below may may take 1 or 2 of the following states as
input.
Nominal - Signal Nominal reading if event tripped
Warning - Signal Warning reading if event tripped
Critical - Signal Critical reading if event tripped
If only one state is listed, that state will be interpreted when the
event is asserted or deasserted. If two states are listed, the first
state will be interpreted when an event is asserted, and the later will
be interpreted when an event is deasserted.
Not all IPMI sensor types and event types are currently supported. If
you would like more to be supported, please e-mail the FreeIPMI mailing
list.
The default values selected for individual events being tripped are
based on best guesses and motherboards being analyzed. If you think
they should be changed, please e-mail the FreeIPMI mailing list to
discuss what the defaults should be.
Most default interpretations can be determined quite easily and can
meet the needs of most users. For example, a reading of
"Performance_Met" is normally better than "Performance_Lags". However,
some sensors can be ambiguous and depend completely on the
manufacturer. For example, "State_Asserted" vs. "State_Deasserted" are
completely at the interpretation of the vendor. Users are advised to
adjust the interpretations below as needed for their machines.
FORMAT
The configuration options that can be specified in the configuration
file are listed below. Each configuration option must be listed on a
separate line. Arguments for an option are separated by any amount of
whitespace. Multiple arguments are also separated by whitespace.
Comments can be marked by using the pound sign ("#") character, and
lines can be continued on the next using backslash ("\").
OPTIONS
IPMI_Threshold_Sensor
The following states correspond to threshold sensor events. This
normally applies to events that dealing with non-discrete
values, such as temperatures, voltages, RPM, etc.
IPMI_Threshold_Sensor_Lower_Non_Critical_Going_Low
Defaults to Warning/Nominal.
IPMI_Threshold_Sensor_Lower_Non_Critical_Going_High
Defaults to Nominal/Nominal.
IPMI_Threshold_Sensor_Lower_Critical_Going_Low
Defaults to Critical/Warning.
IPMI_Threshold_Sensor_Lower_Critical_Going_High
Defaults to Warning/Warning.
IPMI_Threshold_Sensor_Lower_Non_Recoverable_Going_Low
Defaults to Critical/Critical.
IPMI_Threshold_Sensor_Lower_Non_Recoverable_Going_High
Defaults to Critical/Critical.
IPMI_Threshold_Sensor_Upper_Non_Critical_Going_Low
Defaults to Nominal/Nominal.
IPMI_Threshold_Sensor_Upper_Non_Critical_Going_High
Defaults to Warning/Nominal.
IPMI_Threshold_Sensor_Upper_Critical_Going_Low
Defaults to Warning/Warning.
IPMI_Threshold_Sensor_Upper_Critical_Going_High
Defaults to Critical/Warning.
IPMI_Threshold_Sensor_Upper_Non_Recoverable_Going_Low
Defaults to Critical/Critical.
IPMI_Threshold_Sensor_Upper_Non_Recoverable_Going_High
Defaults to Critical/Critical.
IPMI_Temperature_State
The following states correspond to Temperature sensor events
that report an assertion or deassertion.
IPMI_Temperature_State_Deasserted
Defaults to Nominal.
IPMI_Temperature_State_Asserted
Defaults to Warning.
IPMI_Temperature_Limit
The following states correspond to Temperature sensor events
that report on limits.
IPMI_Temperature_Limit_Not_Exceeded
Defaults to Nominal.
IPMI_Temperature_Limit_Exceeded
Defaults to Critical.
IPMI_Temperature_Transition_Severity
The following states correspond to Temperature sensor events
that report on transition severity.
IPMI_Temperature_Transition_Severity_Transition_To_OK
Defaults to Nominal.
IPMI_Temperature_Transition_Severity_Transition_To_Non_Critical_From_OK
Defaults to Warning.
IPMI_Temperature_Transition_Severity_Transition_To_Critical_From_Less_Severe
Defaults to Critical.
IPMI_Temperature_Transition_Severity_Transition_To_Non_Recoverable_From_Less_Severe
Defaults to Critical.
IPMI_Temperature_Transition_Severity_Transition_To_Non_Critical_From_More_Severe
Defaults to Warning.
IPMI_Temperature_Transition_Severity_Transition_To_Critical_From_Non_Recoverable
Defaults to Critical.
IPMI_Temperature_Transition_Severity_Transition_To_Non_Recoverable
Defaults to Critical.
IPMI_Temperature_Transition_Severity_Monitor
Defaults to Warning.
IPMI_Temperature_Transition_Severity_Informational
Defaults to Nominal.
IPMI_Voltage_State
The following states correspond to Voltage sensor events that
report an assertion or deassertion.
IPMI_Voltage_State_Deasserted
Defaults to Nominal.
IPMI_Voltage_State_Asserted
Defaults to Warning.
IPMI_Voltage_Limit
The following states correspond to Voltage sensor events that
report on limits.
IPMI_Voltage_Limit_Not_Exceeded
Defaults to Nominal.
IPMI_Voltage_Limit_Exceeded
Defaults to Critical.
IPMI_Voltage_Performance
The following states correspond to Voltage sensor events that
report on performance.
IPMI_Voltage_Performance_Met
Defaults to Nominal/Nominal.
IPMI_Voltage_Performance_Lags
Defaults to Critical/Warning.
IPMI_Voltage_Transition_Severity
The following states correspond to Voltage sensor events that
report on device severity.
IPMI_Voltage_Transition_Severity_Transition_To_OK
Defaults to Nominal.
IPMI_Voltage_Transition_Severity_Transition_To_Non_Critical_From_OK
Defaults to Warning.
IPMI_Voltage_Transition_Severity_Transition_To_Critical_From_Less_Severe
Defaults to Critical.
IPMI_Voltage_Transition_Severity_Transition_To_Non_Recoverable_From_Less_Severe
Defaults to Critical.
IPMI_Voltage_Transition_Severity_Transition_To_Non_Critical_From_More_Severe
Defaults to Warning.
IPMI_Voltage_Transition_Severity_Transition_To_Critical_From_Non_Recoverable
Defaults to Critical.
IPMI_Voltage_Transition_Severity_Transition_To_Non_Recoverable
Defaults to Critical.
IPMI_Voltage_Transition_Severity_Monitor
Defaults to Warning.
IPMI_Voltage_Transition_Severity_Informational
Defaults to Nominal.
IPMI_Current_Transition_Severity
The following states correspond to Current sensor events that
report on device severity.
IPMI_Current_Transition_Severity_Transition_To_OK
Defaults to Nominal.
IPMI_Current_Transition_Severity_Transition_To_Non_Critical_From_OK
Defaults to Warning.
IPMI_Current_Transition_Severity_Transition_To_Critical_From_Less_Severe
Defaults to Critical.
IPMI_Current_Transition_Severity_Transition_To_Non_Recoverable_From_Less_Severe
Defaults to Critical.
IPMI_Current_Transition_Severity_Transition_To_Non_Critical_From_More_Severe
Defaults to Warning.
IPMI_Current_Transition_Severity_Transition_To_Critical_From_Non_Recoverable
Defaults to Critical.
IPMI_Current_Transition_Severity_Transition_To_Non_Recoverable
Defaults to Critical.
IPMI_Current_Transition_Severity_Monitor
Defaults to Warning.
IPMI_Current_Transition_Severity_Informational
Defaults to Nominal.
IPMI_Fan_State
The following states correspond to Fan sensor events that report
an assertion or deassertion.
IPMI_Fan_State_Deasserted
Defaults to Nominal.
IPMI_Fan_State_Asserted
Defaults to Warning.
IPMI_Fan_Transition_Severity
The following states correspond to Fan sensor events that report
on device severity.
IPMI_Fan_Transition_Severity_Transition_To_OK
Defaults to Nominal.
IPMI_Fan_Transition_Severity_Transition_To_Non_Critical_From_OK
Defaults to Warning.
IPMI_Fan_Transition_Severity_Transition_To_Critical_From_Less_Severe
Defaults to Critical.
IPMI_Fan_Transition_Severity_Transition_To_Non_Recoverable_From_Less_Severe
Defaults to Critical.
IPMI_Fan_Transition_Severity_Transition_To_Non_Critical_From_More_Severe
Defaults to Warning.
IPMI_Fan_Transition_Severity_Transition_To_Critical_From_Non_Recoverable
Defaults to Critical.
IPMI_Fan_Transition_Severity_Transition_To_Non_Recoverable
Defaults to Critical.
IPMI_Fan_Transition_Severity_Monitor
Defaults to Warning.
IPMI_Fan_Transition_Severity_Informational
Defaults to Nominal.
IPMI_Fan_Device_Present
The following states correspond to Fan sensor events that report
on device installation.
IPMI_Fan_Device_Present_Device_Removed_Device_Absent
Defaults to Critical.
IPMI_Fan_Device_Present_Device_Inserted_Device_Present
Defaults to Nominal.
IPMI_Fan_Transition_Availability
The following states correspond to Fan sensor events that report
on device availability.
IPMI_Fan_Transition_Availability_To_Running
Defaults to Nominal/Nominal.
IPMI_Fan_Transition_Availability_To_In_Test
Defaults to Warning/Warning.
IPMI_Fan_Transition_Availability_To_Power_Off
Defaults to Warning/Warning.
IPMI_Fan_Transition_Availability_To_On_Line
Defaults to Warning/Warning.
IPMI_Fan_Transition_Availability_To_Off_Line
Defaults to Warning/Warning.
IPMI_Fan_Transition_Availability_To_Off_Duty
Defaults to Warning/Warning.
IPMI_Fan_Transition_Availability_To_Degraded
Defaults to Critical/Warning.
IPMI_Fan_Transition_Availability_To_Power_Save
Defaults to Warning/Warning.
IPMI_Fan_Transition_Availability_Install_Error
Defaults to Critical/Critical.
IPMI_Fan_Redundancy
The following states correspond to Fan sensor events that report
on redundancy.
IPMI_Fan_Redundancy_Fully_Redundant
Defaults to Nominal/Nominal.
IPMI_Fan_Redundancy_Redundancy_Lost
Defaults to Critical/Warning.
IPMI_Fan_Redundancy_Redundancy_Degraded
Defaults to Warning/Warning.
IPMI_Fan_Redundancy_Non_Redundant_Sufficient_Resources_From_Redundant
Defaults to Critical/Warning.
IPMI_Fan_Redundancy_Non_Redundant_Sufficient_Resources_From_Insufficient_Redundancy
Defaults to Critical/Warning.
IPMI_Fan_Redundancy_Non_Redundant_Insufficient_Resources
Defaults to Critical/Warning.
IPMI_Fan_Redundancy_Redundancy_Degraded_From_Fully_Redundant
Defaults to Warning/Warning.
IPMI_Fan_Redundancy_Redundancy_Degraded_From_Non_Redundant
Defaults to Warning/Warning.
IPMI_Physical_Security
The following states correspond to Physical Security sensor
events w/ Physical Security specific output events.
IPMI_Physical_Security_General_Chassis_Intrusion
Defaults to Critical.
IPMI_Physical_Security_Drive_Bay_Intrusion
Defaults to Critical.
IPMI_Physical_Security_IO_Card_Intrusion
Defaults to Critical.
IPMI_Physical_Security_Processor_Area_Intrusion
Defaults to Critical.
IPMI_Physical_Security_LAN_Leash_Lost
Defaults to Critical.
IPMI_Physical_Security_Unauthorized_Dock_Undock
Defaults to Critical.
IPMI_Physical_Security_FAN_Area_Intrusion
Defaults to Critical.
IPMI_Platform_Security_Violation_Attempt
The following states correspond to Platform Violation Attempt
sensor events w/ Platform Security Violation Attempt specific
output events.
IPMI_Platform_Security_Violation_Attempt_Secure_Mode_Violation_Attempt
Defaults to Critical.
IPMI_Platform_Security_Violation_Attempt_Pre_Boot_Password_Violation_User_Password
Defaults to Critical.
IPMI_Platform_Security_Violation_Attempt_Pre_Boot_Password_Violation_Attempt_Setup_Password
Defaults to Critical.
IPMI_Platform_Security_Violation_Attempt_Pre_Boot_Password_Violation_Network_Boot_Password
Defaults to Critical.
IPMI_Platform_Security_Violation_Attempt_Other_Pre_Boot_Password_Violation
Defaults to Critical.
IPMI_Platform_Security_Violation_Attempt_Out_Of_Band_Access_Password_Violation
Defaults to Critical.
IPMI_Processor
The following states correspond to Processor sensor events w/
Processor specific output events.
IPMI_Processor_IERR
Defaults to Critical.
IPMI_Processor_Thermal_Trip
Defaults to Critical.
IPMI_Processor_FRB1_BIST_Failure
Defaults to Critical.
IPMI_Processor_FRB2_Hang_In_POST_Failure
Defaults to Critical.
IPMI_Processor_FRB3_Processor_Startup_Initialization_Failure
Defaults to Critical.
IPMI_Processor_Configuration_Error
Defaults to Critical.
IPMI_Processor_SMBIOS_Uncorrectable_CPU_Complex_Error
Defaults to Critical.
IPMI_Processor_Processor_Presence_Detected
Defaults to Nominal.
IPMI_Processor_Processor_Disabled
Defaults to Critical.
IPMI_Processor_Terminator_Presence_Detected
Defaults to Critical.
IPMI_Processor_Processor_Automatically_Throttled
Defaults to Warning.
IPMI_Processor_Machine_Check_Exception
Defaults to Critical.
IPMI_Processor_Correctable_Machine_Check_Error
Defaults to Warning.
IPMI_Processor_State
The following states correspond to Processor sensor events that
report an assertion or deassertion.
IPMI_Processor_State_Deasserted
Defaults to Nominal.
IPMI_Processor_State_Asserted
Defaults to Critical.
IPMI_Power_Supply
The following states correspond to Power Supply sensor events w/
Power Supply specific output events.
IPMI_Power_Supply_Presence_Detected
Defaults to Nominal/Nominal.
IPMI_Power_Supply_Power_Supply_Failure_Detected
Defaults to Critical/Critical.
IPMI_Power_Supply_Predictive_Failure
Defaults to Critical/Critical.
IPMI_Power_Supply_Power_Supply_Input_Lost_AC_DC
Defaults to Critical/Warning.
IPMI_Power_Supply_Power_Supply_Input_Lost_Or_Out_Of_Range
Defaults to Critical/Warning.
IPMI_Power_Supply_Power_Supply_Input_Out_Of_Range_But_Present
Defaults to Critical/Warning.
IPMI_Power_Supply_Configuration_Error
Defaults to Critical/Critical.
IPMI_Power_Supply_Power_Supply_Inactive
Defaults to Warning/Warning.
IPMI_Power_Supply_State
The following states correspond to Power_Supply sensor events
that report an assertion or deassertion.
IPMI_Power_Supply_State_Deasserted
Defaults to Critical.
IPMI_Power_Supply_State_Asserted
Defaults to Nominal.
IPMI_Power_Supply_Transition_Severity
The following states correspond to Power Supply sensor events
that report on device severity.
IPMI_Power_Supply_Transition_Severity_Transition_To_OK
Defaults to Nominal.
IPMI_Power_Supply_Transition_Severity_Transition_To_Non_Critical_From_OK
Defaults to Warning.
IPMI_Power_Supply_Transition_Severity_Transition_To_Critical_From_Less_Severe
Defaults to Critical.
IPMI_Power_Supply_Transition_Severity_Transition_To_Non_Recoverable_From_Less_Severe
Defaults to Critical.
IPMI_Power_Supply_Transition_Severity_Transition_To_Non_Critical_From_More_Severe
Defaults to Warning.
IPMI_Power_Supply_Transition_Severity_Transition_To_Critical_From_Non_Recoverable
Defaults to Critical.
IPMI_Power_Supply_Transition_Severity_Transition_To_Non_Recoverable
Defaults to Critical.
IPMI_Power_Supply_Transition_Severity_Monitor
Defaults to Warning.
IPMI_Power_Supply_Transition_Severity_Informational
Defaults to Nominal.
IPMI_Power_Supply_Redundancy
The following states correspond to Power Supply sensor events
that report on redundancy.
IPMI_Power_Supply_Redundancy_Fully_Redundant
Defaults to Nominal/Nominal.
IPMI_Power_Supply_Redundancy_Redundancy_Lost
Defaults to Critical/Warning.
IPMI_Power_Supply_Redundancy_Redundancy_Degraded
Defaults to Warning/Warning.
IPMI_Power_Supply_Redundancy_Non_Redundant_Sufficient_Resources_From_Redundant
Defaults to Critical/Warning.
IPMI_Power_Supply_Redundancy_Non_Redundant_Sufficient_Resources_From_Insufficient_Redundancy
Defaults to Critical/Warning.
IPMI_Power_Supply_Redundancy_Non_Redundant_Insufficient_Resources
Defaults to Critical/Warning.
IPMI_Power_Supply_Redundancy_Redundancy_Degraded_From_Fully_Redundant
Defaults to Warning/Warning.
IPMI_Power_Supply_Redundancy_Redundancy_Degraded_From_Non_Redundant
Defaults to Warning/Warning.
IPMI_Power_Unit
The following states correspond to Power Unit sensor events w/
Power Unit specific output events.
IPMI_Power_Unit_Power_Off_Power_Down
Defaults to Nominal/Nominal.
IPMI_Power_Unit_Power_Cycle
Defaults to Nominal/Nominal.
IPMI_Power_Unit_240VA_Power_Down
Defaults to Warning/Nominal.
IPMI_Power_Unit_Interlock_Power_Down
Defaults to Warning/Warning.
IPMI_Power_Unit_AC_Lost
Defaults to Critical/Warning.
IPMI_Power_Unit_Soft_Power_Control_Failure
Defaults to Critical/Critical.
IPMI_Power_Unit_Power_Unit_Failure_Detected
Defaults to Critical/Critical.
IPMI_Power_Unit_Predictive_Failure
Defaults to Critical/Critical.
IPMI_Power_Unit_Device_Present
The following states correspond to Power Unit sensor events that
report on device installation.
IPMI_Power_Unit_Device_Present_Device_Removed_Device_Absent
Defaults to Critical.
IPMI_Power_Unit_Device_Present_Device_Inserted_Device_Present
Defaults to Nominal.
IPMI_Power_Unit_Redundancy
The following states correspond to Power Unit sensor events that
report on redundancy.
IPMI_Power_Unit_Redundancy_Fully_Redundant
Defaults to Nominal/Nominal.
IPMI_Power_Unit_Redundancy_Redundancy_Lost
Defaults to Critical/Warning.
IPMI_Power_Unit_Redundancy_Redundancy_Degraded
Defaults to Warning/Warning.
IPMI_Power_Unit_Redundancy_Non_Redundant_Sufficient_Resources_From_Redundant
Defaults to Critical/Warning.
IPMI_Power_Unit_Redundancy_Non_Redundant_Sufficient_Resources_From_Insufficient_Redundancy
Defaults to Critical/Warning.
IPMI_Power_Unit_Redundancy_Non_Redundant_Insufficient_Resources
Defaults to Critical/Warning.
IPMI_Power_Unit_Redundancy_Redundancy_Degraded_From_Fully_Redundant
Defaults to Warning/Warning.
IPMI_Power_Unit_Redundancy_Redundancy_Degraded_From_Non_Redundant
Defaults to Warning/Warning.
IPMI_Cooling_Device_Redundancy
The following states correspond to Cooling Device sensor events
that report on redundancy.
IPMI_Cooling_Device_Redundancy_Fully_Redundant
Defaults to Nominal/Nominal.
IPMI_Cooling_Device_Redundancy_Redundancy_Lost
Defaults to Critical/Warning.
IPMI_Cooling_Device_Redundancy_Redundancy_Degraded
Defaults to Warning/Warning.
IPMI_Cooling_Device_Redundancy_Non_Redundant_Sufficient_Resources_From_Redundant
Defaults to Critical/Warning.
IPMI_Cooling_Device_Redundancy_Non_Redundant_Sufficient_Resources_From_Insufficient_Redundancy
Defaults to Critical/Warning.
IPMI_Cooling_Device_Redundancy_Non_Redundant_Insufficient_Resources
Defaults to Critical/Warning.
IPMI_Cooling_Device_Redundancy_Redundancy_Degraded_From_Fully_Redundant
Defaults to Warning/Warning.
IPMI_Cooling_Device_Redundancy_Redundancy_Degraded_From_Non_Redundant
Defaults to Warning/Warning.
IPMI_Memory
The following states correspond to Memory sensor events w/
Memory specific output events.
IPMI_Memory_Correctable_Memory_Error
Defaults to Warning.
IPMI_Memory_Uncorrectable_Memory_Error
Defaults to Critical.
IPMI_Memory_Parity
Defaults to Critical.
IPMI_Memory_Memory_Scrub_Failed
Defaults to Critical.
IPMI_Memory_Memory_Device_Disabled
Defaults to Critical.
IPMI_Memory_Correctable_Memory_Error_Logging_Limit_Reached
Defaults to Warning.
IPMI_Memory_Presence_Detected
Defaults to Nominal.
IPMI_Memory_Configuration_Error
Defaults to Critical.
IPMI_Memory_Spare
Defaults to Nominal.
IPMI_Memory_Memory_Automatically_Throttled
Defaults to Warning.
IPMI_Memory_Critical_Overtemperature
Defaults to Critical.
IPMI_Memory_State
The following states correspond to Memory sensor events that
report an assertion or deassertion.
IPMI_Memory_State_Deasserted
Defaults to Nominal.
IPMI_Memory_State_Asserted
Defaults to Critical.
IPMI_Memory_Transition_Severity
The following states correspond to Memory sensor events that
report on transition severity.
IPMI_Memory_Transition_Severity_Transition_To_OK
Defaults to Nominal.
IPMI_Memory_Transition_Severity_Transition_To_Non_Critical_From_OK
Defaults to Warning.
IPMI_Memory_Transition_Severity_Transition_To_Critical_From_Less_Severe
Defaults to Critical.
IPMI_Memory_Transition_Severity_Transition_To_Non_Recoverable_From_Less_Severe
Defaults to Critical.
IPMI_Memory_Transition_Severity_Transition_To_Non_Critical_From_More_Severe
Defaults to Warning.
IPMI_Memory_Transition_Severity_Transition_To_Critical_From_Non_Recoverable
Defaults to Critical.
IPMI_Memory_Transition_Severity_Transition_To_Non_Recoverable
Defaults to Critical.
IPMI_Memory_Transition_Severity_Monitor
Defaults to Warning.
IPMI_Memory_Transition_Severity_Informational
Defaults to Nominal.
IPMI_Memory_Redundancy
The following states correspond to Memory sensor events that
report on redundancy.
IPMI_Memory_Redundancy_Fully_Redundant
Defaults to Nominal/Nominal.
IPMI_Memory_Redundancy_Redundancy_Lost
Defaults to Critical/Warning.
IPMI_Memory_Redundancy_Redundancy_Degraded
Defaults to Warning/Warning.
IPMI_Memory_Redundancy_Non_Redundant_Sufficient_Resources_From_Redundant
Defaults to Critical/Warning.
IPMI_Memory_Redundancy_Non_Redundant_Sufficient_Resources_From_Insufficient_Redundancy
Defaults to Critical/Warning.
IPMI_Memory_Redundancy_Non_Redundant_Insufficient_Resources
Defaults to Critical/Warning.
IPMI_Memory_Redundancy_Redundancy_Degraded_From_Fully_Redundant
Defaults to Warning/Warning.
IPMI_Memory_Redundancy_Redundancy_Degraded_From_Non_Redundant
Defaults to Warning/Warning.
IPMI_Drive_Slot
The following states correspond to Drive Slot sensor events w/
Drive Slot specific output events.
IPMI_Drive_Slot_Drive_Presence
Defaults to Nominal.
IPMI_Drive_Slot_Drive_Fault
Defaults to Critical.
IPMI_Drive_Slot_Predictive_Failure
Defaults to Critical.
IPMI_Drive_Slot_Hot_Spare
Defaults to Nominal.
IPMI_Drive_Slot_Consistency_Check_Parity_Check_In_Progress
Defaults to Nominal.
IPMI_Drive_Slot_In_Critical_Array
Defaults to Critical.
IPMI_Drive_Slot_In_Failed_Array
Defaults to Critical.
IPMI_Drive_Slot_Rebuild_Remap_In_Progress
Defaults to Nominal.
IPMI_Drive_Slot_Rebuild_Remap_Aborted
Defaults to Critical.
IPMI_Drive_Slot_State
The following states correspond to Drive Slot sensor events that
report an assertion or deassertion.
IPMI_Drive_Slot_State_Deasserted
Defaults to Warning.
IPMI_Drive_Slot_State_Asserted
Defaults to Nominal.
IPMI_Drive_Slot_Predictive_Failure
The following states correspond to Drive_Slot sensor events that
report a predictive failure assertion or deassertion.
IPMI_Drive_Slot_Predictive_Failure_Deasserted
Defaults to Nominal.
IPMI_Drive_Slot_Predictive_Failure_Asserted
Defaults to Critical.
IPMI_Drive_Slot_Device_Present
The following states correspond to Drive Slot sensor events that
report on device installation.
IPMI_Drive_Slot_Device_Present_Device_Removed_Device_Absent
Defaults to Critical.
IPMI_Drive_Slot_Device_Present_Device_Inserted_Device_Present
Defaults to Nominal.
IPMI_POST_Memory_Resize_State
The following states correspond to POST Memory Resize sensor
events that report an assertion or deassertion.
IPMI_POST_Memory_Resize_State_Deasserted
Defaults to Nominal.
IPMI_POST_Memory_Resize_State_Asserted
Defaults to Warning.
IPMI_System_Firmware_Progress
The following states correspond to System Firmware Progress
sensor events w/ System Firmware Progress specific output
events.
IPMI_System_Firmware_Progress_System_Firmware_Error
Defaults to Critical.
IPMI_System_Firmware_Progress_System_Firmware_Hang
Defaults to Critical.
IPMI_System_Firmware_Progress_System_Firmware_Progress
Defaults to Nominal.
IPMI_System_Firmware_Progress_Transition_Severity
The following states correspond to System Firmware Progress
sensor events that report on device severity.
IPMI_System_Firmware_Progress_Transition_Severity_Transition_To_OK
Defaults to Nominal.
IPMI_System_Firmware_Progress_Transition_Severity_Transition_To_Non_Critical_From_OK
Defaults to Warning.
IPMI_System_Firmware_Progress_Transition_Severity_Transition_To_Critical_From_Less_Severe
Defaults to Critical.
IPMI_System_Firmware_Progress_Transition_Severity_Transition_To_Non_Recoverable_From_Less_Severe
Defaults to Critical.
IPMI_System_Firmware_Progress_Transition_Severity_Transition_To_Non_Critical_From_More_Severe
Defaults to Warning.
IPMI_System_Firmware_Progress_Transition_Severity_Transition_To_Critical_From_Non_Recoverable
Defaults to Critical.
IPMI_System_Firmware_Progress_Transition_Severity_Transition_To_Non_Recoverable
Defaults to Critical.
IPMI_System_Firmware_Progress_Transition_Severity_Monitor
Defaults to Warning.
IPMI_System_Firmware_Progress_Transition_Severity_Informational
Defaults to Nominal.
IPMI_Event_Logging_Disabled
The following states correspond to Event Logging Disabled sensor
events w/
IPMI_Event_Logging_Disabled_Correctable_Memory_Error_Logging_Disabled
Defaults to Critical.
IPMI_Event_Logging_Disabled_Event_Type_Logging_Disabled
Defaults to Critical.
IPMI_Event_Logging_Disabled_Log_Area_Reset_Cleared
Defaults to Nominal.
IPMI_Event_Logging_Disabled_All_Event_Logging_Disabled
Defaults to Critical.
IPMI_Event_Logging_Disabled_SEL_Full
Defaults to Critical.
IPMI_Event_Logging_Disabled_SEL_Almost_Full
Defaults to Warning.
IPMI_Event_Logging_Disabled_Correctable_Machine_Check_Error_Logging_Disabled
Defaults to Critical.
IPMI_System_Event
The following states correspond to System Event sensor events w/
System Event specific output events.
IPMI_System_Event_System_Reconfigured
Defaults to Warning.
IPMI_System_Event_OEM_System_Boot_Event
Defaults to Nominal.
IPMI_System_Event_Undetermined_System_Hardware_Failure
Defaults to Critical.
IPMI_System_Event_Entry_Added_To_Auxiliary_Log
Defaults to Nominal.
IPMI_System_Event_PEF_Action
Defaults to Nominal.
IPMI_System_Event_Timestamp_Clock_Sync
Defaults to Warning.
IPMI_System_Event_Transition_State
The following states correspond to System Event sensor events
that report a transition state.
IPMI_System_Event_Transition_State_Active
Defaults to Nominal.
IPMI_System_Event_Transition_State_Idle
Defaults to Nominal.
IPMI_System_Event_Transition_State_Busy
Defaults to Nominal.
IPMI_System_Event_State
The following states correspond to System Event sensor events
that report an assertion or deassertion.
IPMI_System_Event_State_Deasserted
Defaults to Nominal.
IPMI_System_Event_State_Asserted
Defaults to Warning.
IPMI_Critical_Interrupt
The following states correspond to Critical Interrupt sensor
events w/ Critical Interrupt specific output events.
IPMI_Critical_Interrupt_Front_Panel_NMI_Diagnostic_Interrupt
Defaults to Critical.
IPMI_Critical_Interrupt_Bus_Timeout
Defaults to Critical.
IPMI_Critical_Interrupt_IO_Channel_Check_NMI
Defaults to Critical.
IPMI_Critical_Interrupt_Software_NMI
Defaults to Warning.
IPMI_Critical_Interrupt_PCI_PERR
Defaults to Critical.
IPMI_Critical_Interrupt_PCI_SERR
Defaults to Critical.
IPMI_Critical_Interrupt_EISA_Fail_Safe_Timeout
Defaults to Critical.
IPMI_Critical_Interrupt_Bus_Correctable_Error
Defaults to Warning.
IPMI_Critical_Interrupt_Bus_Uncorrectable_Error
Defaults to Critical.
IPMI_Critical_Interrupt_Fatal_NMI
Defaults to Critical.
IPMI_Critical_Interrupt_Bus_Fatal_Error
Defaults to Critical.
IPMI_Critical_Interrupt_Bus_Degraded Defaults to Warning.
IPMI_Button_Switch
The following states correspond to Button/Switch sensor events
w/ Button/Switch specific output events.
IPMI_Button_Switch_Power_Button_Pressed
Defaults to Info.
IPMI_Button_Switch_Sleep_Button_Pressed
Defaults to Info.
IPMI_Button_Switch_Reset_Button_Pressed
Defaults to Info.
IPMI_Button_Switch_FRU_Latch_Open
Defaults to Warning.
IPMI_Button_Switch_FRU_Service_Request_Button
Defaults to Warning.
IPMI_Button_Switch_State
The following states correspond to Button/Switch sensor events
that report an assertion or deassertion.
IPMI_Button_Switch_State_Deasserted
Defaults to Nominal.
IPMI_Button_Switch_State_Asserted
Defaults to Nominal.
IPMI_Button_Switch_Transition_Severity
The following states correspond to Button Switch sensor events
that report on device severity.
IPMI_Button_Switch_Transition_Severity_Transition_To_OK
Defaults to Nominal.
IPMI_Button_Switch_Transition_Severity_Transition_To_Non_Critical_From_OK
Defaults to Warning.
IPMI_Button_Switch_Transition_Severity_Transition_To_Critical_From_Less_Severe
Defaults to Critical.
IPMI_Button_Switch_Transition_Severity_Transition_To_Non_Recoverable_From_Less_Severe
Defaults to Critical.
IPMI_Button_Switch_Transition_Severity_Transition_To_Non_Critical_From_More_Severe
Defaults to Warning.
IPMI_Button_Switch_Transition_Severity_Transition_To_Critical_From_Non_Recoverable
Defaults to Critical.
IPMI_Button_Switch_Transition_Severity_Transition_To_Non_Recoverable
Defaults to Critical.
IPMI_Button_Switch_Transition_Severity_Monitor
Defaults to Warning.
IPMI_Button_Switch_Transition_Severity_Informational
Defaults to Nominal.
IPMI_Module_Board_State
The following states correspond to Module/Board sensor events
that report an assertion or deassertion.
IPMI_Module_Board_State_Deasserted
Defaults to Nominal.
IPMI_Module_Board_State_Asserted
Defaults to Critical.
IPMI_Module_Board_Device_Present
The following states correspond to Module/Board sensor events
that report on device installation.
IPMI_Module_Board_Device_Present_Device_Removed_Device_Absent
Defaults to Critical.
IPMI_Module_Board_Device_Present_Device_Inserted_Device_Present
Defaults to Nominal.
IPMI_Chassis_Transition_Severity
The following states correspond to Chassis sensor events that
report on device severity.
IPMI_Chassis_Transition_Severity_Transition_To_OK
Defaults to Nominal.
IPMI_Chassis_Transition_Severity_Transition_To_Non_Critical_From_OK
Defaults to Warning.
IPMI_Chassis_Transition_Severity_Transition_To_Critical_From_Less_Severe
Defaults to Critical.
IPMI_Chassis_Transition_Severity_Transition_To_Non_Recoverable_From_Less_Severe
Defaults to Critical.
IPMI_Chassis_Transition_Severity_Transition_To_Non_Critical_From_More_Severe
Defaults to Warning.
IPMI_Chassis_Transition_Severity_Transition_To_Critical_From_Non_Recoverable
Defaults to Critical.
IPMI_Chassis_Transition_Severity_Transition_To_Non_Recoverable
Defaults to Critical.
IPMI_Chassis_Transition_Severity_Monitor
Defaults to Warning.
IPMI_Chassis_Transition_Severity_Informational
Defaults to Nominal.
IPMI_Chip_Set
The following states correspond to Chip Set sensor events w/
Chip Set specific output events.
IPMI_Chip_Set_Soft_Power_Control_Failure
Defaults to Critical.
IPMI_Chip_Set_Thermal_Trip
Defaults to Critical.
IPMI_Chip_Set_Transition_Severity
The following states correspond to Chip Set sensor events that
report on device severity.
IPMI_Chip_Set_Transition_Severity_Transition_To_OK
Defaults to Nominal.
IPMI_Chip_Set_Transition_Severity_Transition_To_Non_Critical_From_OK
Defaults to Warning.
IPMI_Chip_Set_Transition_Severity_Transition_To_Critical_From_Less_Severe
Defaults to Critical.
IPMI_Chip_Set_Transition_Severity_Transition_To_Non_Recoverable_From_Less_Severe
Defaults to Critical.
IPMI_Chip_Set_Transition_Severity_Transition_To_Non_Critical_From_More_Severe
Defaults to Warning.
IPMI_Chip_Set_Transition_Severity_Transition_To_Critical_From_Non_Recoverable
Defaults to Critical.
IPMI_Chip_Set_Transition_Severity_Transition_To_Non_Recoverable
Defaults to Critical.
IPMI_Chip_Set_Transition_Severity_Monitor
Defaults to Warning.
IPMI_Chip_Set_Transition_Severity_Informational
Defaults to Nominal.
IPMI_Cable_Interconnect
The following states correspond to Cable/Interconnect sensor
events w/ Cable/Interconnect specific output events.
IPMI_Cable_Interconnect_Is_Connected
Defaults to Nominal.
IPMI_Cable_Interconnect_Configuration_Error
Defaults to Critical.
IPMI_Cable_Interconnect_Transition_Severity
The following states correspond to Cable/Interconnect sensor
events that report on device severity.
IPMI_Cable_Interconnect_Transition_Severity_Transition_To_OK
Defaults to Nominal.
IPMI_Cable_Interconnect_Transition_Severity_Transition_To_Non_Critical_From_OK
Defaults to Warning.
IPMI_Cable_Interconnect_Transition_Severity_Transition_To_Critical_From_Less_Severe
Defaults to Critical.
IPMI_Cable_Interconnect_Transition_Severity_Transition_To_Non_Recoverable_From_Less_Severe
Defaults to Critical.
IPMI_Cable_Interconnect_Transition_Severity_Transition_To_Non_Critical_From_More_Severe
Defaults to Warning.
IPMI_Cable_Interconnect_Transition_Severity_Transition_To_Critical_From_Non_Recoverable
Defaults to Critical.
IPMI_Cable_Interconnect_Transition_Severity_Transition_To_Non_Recoverable
Defaults to Critical.
IPMI_Cable_Interconnect_Transition_Severity_Monitor
Defaults to Warning.
IPMI_Cable_Interconnect_Transition_Severity_Informational
Defaults to Nominal.
IPMI_System_Boot_Initiated
The following states correspond to System Boot Initiated sensor
events w/ System Boot Initiated specific output events.
IPMI_System_Boot_Initiated_Initiated_By_Power_Up Defaults to
Nominal. IPMI_System_Boot_Initiated_Initiated_By_Hard_Reset
Defaults to Nominal.
IPMI_System_Boot_Initiated_Initiated_By_Warm_Reset Defaults to
Nominal. IPMI_System_Boot_Initiated_User_Requested_PXE_Boot
Defaults to Nominal.
IPMI_System_Boot_Initiated_Automatic_Boot_To_Diagnostic Defaults
to Nominal.
IPMI_System_Boot_Initiated_OS_Run_Time_Software_Initiated_Hard_Reset
Defaults to Warning.
IPMI_System_Boot_Initiated_OS_Run_Time_Software_Initiated_Warm_Reset
Defaults to Warning. IPMI_System_Boot_Initiated_System_Restart
Defaults to Nominal.
IPMI_Boot_Error
The following states correspond to Boot Error sensor events w/
Boot Error specific output events.
IPMI_Boot_Error_No_Bootable_Media
Defaults to Critical.
IPMI_Boot_Error_Non_Bootable_Diskette_Left_In_Drive
Defaults to Critical.
IPMI_Boot_Error_PXE_Server_Not_Found
Defaults to Critical.
IPMI_Boot_Error_Invalid_Boot_Sector
Defaults to Critical.
IPMI_Boot_Error_Timeout_Waiting_For_User_Selection_Of_Boot_Source
Defaults to Warning.
IPMI_Boot_Error_State
The following states correspond to Boot Error sensor events that
report an assertion or deassertion.
IPMI_Boot_Error_State_Deasserted
Defaults to Nominal.
IPMI_Boot_Error_State_Asserted
Defaults to Critical.
IPMI_Boot_Error_Transition_Severity
The following states correspond to Boot Error sensor events that
report on device severity.
IPMI_Boot_Error_Transition_Severity_Transition_To_OK
Defaults to Nominal.
IPMI_Boot_Error_Transition_Severity_Transition_To_Non_Critical_From_OK
Defaults to Warning.
IPMI_Boot_Error_Transition_Severity_Transition_To_Critical_From_Less_Severe
Defaults to Critical.
IPMI_Boot_Error_Transition_Severity_Transition_To_Non_Recoverable_From_Less_Severe
Defaults to Critical.
IPMI_Boot_Error_Transition_Severity_Transition_To_Non_Critical_From_More_Severe
Defaults to Warning.
IPMI_Boot_Error_Transition_Severity_Transition_To_Critical_From_Non_Recoverable
Defaults to Critical.
IPMI_Boot_Error_Transition_Severity_Transition_To_Non_Recoverable
Defaults to Critical.
IPMI_Boot_Error_Transition_Severity_Monitor
Defaults to Warning.
IPMI_Boot_Error_Transition_Severity_Informational
Defaults to Nominal.
IPMI_OS_Boot
The following states correspond to OS Boot sensor events w/ OS
Boot specific output events.
IPMI_OS_Boot_A_Boot_Completed Defaults to Nominal.
IPMI_OS_Boot_C_Boot_Completed Defaults to Nominal.
IPMI_OS_Boot_PXE_Boot_Completed Defaults to Nominal.
IPMI_OS_Boot_Diagnostic_Boot_Completed Defaults to Nominal.
IPMI_OS_Boot_CD_ROM_Boot_Completed Defaults to Nominal.
IPMI_OS_Boot_ROM_Boot_Completed Defaults to Nominal.
IPMI_OS_Boot_Boot_Completed_Boot_Device_Not_Specified Defaults
to Warning.
IPMI_OS_Boot_Base_OS_Hypervisor_Installation_Started Defaults to
Nominal. IPMI_OS_Boot_Base_OS_Hypervisor_Installation_Completed
Defaults to Nominal.
IPMI_OS_Boot_Base_OS_Hypervisor_Installation_Aborted Defaults to
Warning. IPMI_OS_Boot_Base_OS_Hypervisor_Installation_Failed
Defaults to Critical.
IPMI_OS_Critical_Stop
The following states correspond to OS Critical Stop sensor
events w/ OS Critical Stop specific output events.
IPMI_OS_Critical_Stop_Critical_Stop_During_OS_Load Defaults to
Critical. IPMI_OS_Critical_Stop_Run_Time_Critical_Stop Defaults
to Critical. IPMI_OS_Critical_Stop_OS_Graceful_Stop Defaults to
Warning. IPMI_OS_Critical_Stop_OS_Graceful_Shutdown Defaults to
Warning. IPMI_OS_Critical_Stop_Soft_Shutdown_Initiated_By_PEF
Defaults to Warning. IPMI_OS_Critical_Stop_Agent_Not_Responding
Defaults to Critical.
IPMI_OS_Critical_Stop_State
The following states correspond to OS Critical Stop sensor
events that report an assertion or deassertion.
IPMI_OS_Critical_Stop_State_Deasserted
Defaults to Nominal.
IPMI_OS_Critical_Stop_State_Asserted
Defaults to Critical.
IPMI_Slot_Connector
The following states correspond to Slot Connector sensor events
w/ Slot Connector specific output events.
IPMI_Slot_Connector_Fault_Status_Asserted
Defaults to Critical.
IPMI_Slot_Connector_Identify_Status_Asserted
Defaults to Warning.
IPMI_Slot_Connector_Slot_Connector_Device_Installed_Attached
Defaults to Nominal.
IPMI_Slot_Connector_Slot_Connector_Ready_For_Device_Installation
Defaults to Nominal.
IPMI_Slot_Connector_Slot_Connector_Ready_For_Device_Removal
Defaults to Nominal.
IPMI_Slot_Connector_Slot_Power_Is_Off
Defaults to Nominal.
IPMI_Slot_Connector_Slot_Connector_Device_Removal_Request
Defaults to Warning.
IPMI_Slot_Connector_Interlock_Asserted
Defaults to Warning.
IPMI_Slot_Connector_Slot_Is_Disabled
Defaults to Warning.
IPMI_Slot_Connector_Slot_Holds_Spare_Device
Defaults to Nominal.
IPMI_Slot_Connector_Transition_Severity
The following states correspond to Slot Connector sensor events
that report on device severity.
IPMI_Slot_Connector_Transition_Severity_Transition_To_OK
Defaults to Nominal.
IPMI_Slot_Connector_Transition_Severity_Transition_To_Non_Critical_From_OK
Defaults to Warning.
IPMI_Slot_Connector_Transition_Severity_Transition_To_Critical_From_Less_Severe
Defaults to Critical.
IPMI_Slot_Connector_Transition_Severity_Transition_To_Non_Recoverable_From_Less_Severe
Defaults to Critical.
IPMI_Slot_Connector_Transition_Severity_Transition_To_Non_Critical_From_More_Severe
Defaults to Warning.
IPMI_Slot_Connector_Transition_Severity_Transition_To_Critical_From_Non_Recoverable
Defaults to Critical.
IPMI_Slot_Connector_Transition_Severity_Transition_To_Non_Recoverable
Defaults to Critical.
IPMI_Slot_Connector_Transition_Severity_Monitor
Defaults to Warning.
IPMI_Slot_Connector_Transition_Severity_Informational
Defaults to Nominal.
IPMI_System_ACPI_Power_State
IPMI_System_ACPI_Power_State_S0_G0
Defaults to Nominal.
IPMI_System_ACPI_Power_State_S1
Defaults to Nominal.
IPMI_System_ACPI_Power_State_S2
Defaults to Nominal.
IPMI_System_ACPI_Power_State_S3
Defaults to Nominal.
IPMI_System_ACPI_Power_State_S4
Defaults to Nominal.
IPMI_System_ACPI_Power_State_S5_G2
Defaults to Nominal.
IPMI_System_ACPI_Power_State_S4_S5_Soft_Off
Defaults to Nominal.
IPMI_System_ACPI_Power_State_G3_Mechanical_Off
Defaults to Nominal.
IPMI_System_ACPI_Power_State_Sleeping_in_an_S1_S2_or_S3_States
Defaults to Nominal.
IPMI_System_ACPI_Power_State_G1_Sleeping
Defaults to Nominal.
IPMI_System_ACPI_Power_State_S5_Entered_By_Override
Defaults to Nominal.
IPMI_System_ACPI_Power_State_Legacy_ON_State
Defaults to Nominal.
IPMI_System_ACPI_Power_State_Legacy_OFF_State
Defaults to Nominal.
IPMI_System_ACPI_Power_State_Unspecified
Defaults to Critical.
IPMI_System_ACPI_Power_State_Unknown
Defaults to Critical.
IPMI_Watchdog2
The following states correspond to Watchdog 2 sensor events w/
Watchdog 2 specific output events.
IPMI_Watchdog2_Timer_Expired
Defaults to Warning.
IPMI_Watchdog2_Hard_Reset
Defaults to Critical.
IPMI_Watchdog2_Power_Down
Defaults to Critical.
IPMI_Watchdog2_Power_Cycle
Defaults to Critical.
IPMI_Watchdog2_Reserved1
Defaults to Nominal.
IPMI_Watchdog2_Reserved2
Defaults to Nominal.
IPMI_Watchdog2_Reserved3
Defaults to Nominal.
IPMI_Watchdog2_Reserved4
Defaults to Nominal.
IPMI_Watchdog2_Timer_Interrupt
Defaults to Warning.
IPMI_Platform_Alert
The following states correspond to Platform Alert sensor events
w/ Platform Alert specific output events.
IPMI_Platform_Alert_Platform_Generated_Page Defaults to Nominal.
IPMI_Platform_Alert_Platform_Generated_LAN_Alert Defaults to
Nominal. IPMI_Platform_Alert_Platform_Event_Trap_Generated
Defaults to Nominal.
IPMI_Platform_Alert_Platform_Generated_SNMP_Trap Defaults to
Nominal.
IPMI_Platform_Alert_State
The following states correspond to Platform Alert sensor events
that report an assertion or deassertion.
IPMI_Platform_Alert_State_Deasserted
Defaults to Nominal.
IPMI_Platform_Alert_State_Asserted
Defaults to Critical.
IPMI_Entity_Presence
The following states correspond to Entity Presence sensor events
w/ Entity Presence specific output events.
IPMI_Entity_Presence_Entity_Present
Defaults to Nominal.
IPMI_Entity_Presence_Entity_Absent
Defaults to Critical.
IPMI_Entity_Presence_Entity_Disabled
Defaults to Critical.
IPMI_Entity_Presence_Device_Present
The following states correspond to Entity Presence sensor events
that report on device installation.
IPMI_Entity_Presence_Device_Present_Device_Removed_Device_Absent
Defaults to Nominal.
IPMI_Entity_Presence_Device_Present_Device_Inserted_Device_Present
Defaults to Nominal.
IPMI_LAN
The following states correspond to LAN sensor events w/ LAN
specific output events.
IPMI_LAN_Heartbeat Defaults to Nominal. IPMI_LAN_Heartbeat_Lost
Defaults to Warning.
IPMI_Management_Subsystem_Health
The following states correspond to Management Subsystem Health
sensor events w/ Management Subsystem Health specific output
events.
IPMI_Management_Subsystem_Health_Sensor_Access_Degraded_Or_Unavailable
Defaults to Critical.
IPMI_Management_Subsystem_Health_Controller_Access_Degraded_Or_Unavailable
Defaults to Critical.
IPMI_Management_Subsystem_Health_Management_Controller_Off_Line
Defaults to Critical.
IPMI_Management_Subsystem_Health_Management_Controller_Unavailable
Defaults to Critical.
IPMI_Management_Subsystem_Health_Sensor_Failure
Defaults to Critical.
IPMI_Management_Subsystem_Health_FRU_Failure
Defaults to Critical.
IPMI_Battery
The following states correspond to Battery sensor events w/
Battery specific output events.
IPMI_Battery_Battery_Low
Defaults to Warning.
IPMI_Battery_Battery_Failed
Defaults to Critical.
IPMI_Battery_Battery_Presence_Detected
Defaults to Nominal.
IPMI_Session_Audit
The following states correspond to Session Audit sensor events
w/ Session Audit specific output events.
IPMI_Session_Audit_Session_Activated
Defaults to Nominal.
IPMI_Session_Audit_Session_Deactivated
Defaults to Nominal.
IIPMI_Session_Audit_Invalid_Username_Or_Password
Defaults to Warning.
IPMI_Session_Audit_Invalid_Password_Disable
Defaults to Critical.
IPMI_Version_Change_Transition_Severity
The following states correspond to Version Change sensor events
that Version Change specific output events.
IPMI_Version_Change_Hardware_Change_Detected_With_Associated_Entity
Defaults to Warning.
IPMI_Version_Change_Firmware_Or_Software_Change_Detected_With_Associated_Entity
Defaults to Warning.
IPMI_Version_Change_Hardware_Incompatability_Detected_With_Associated_Entity
Defaults to Critical.
IPMI_Version_Change_Firmware_Or_Software_Incompatability_Detected_With_Associated_Entity
Defaults to Critical.
IPMI_Version_Change_Entity_Is_Of_An_Invalid_Or_Unsupported_Hardware_Version
Defaults to Critical.
IPMI_Version_Change_Entity_Contains_An_Invalid_Or_Unsupported_Firmware_Or_Software_Version
Defaults to Critical.
IPMI_Version_Change_Hardware_Change_Detected_With_Associated_Entity_Was_Successful
Defaults to Nominal.
IPMI_Version_Change_Software_Or_FW_Change_Detected_With_Associated_Entity_Was_Successful
Defaults to Nominal.
IPMI_FRU_State
The following states correspond to FRU State sensor events w/
FRU State specific output events.
IPMI_FRU_State_FRU_Not_Installed
Defaults to Critical.
IPMI_FRU_State_FRU_Inactive
Defaults to Critical.
IPMI_FRU_State_FRU_Activation_Requested
Defaults to Warning.
IPMI_FRU_State_FRU_Activation_In_Progress
Defaults to Warning.
IPMI_FRU_State_FRU_Active
Defaults to Nominal.
IPMI_FRU_State_FRU_Deactivation_Requested
Defaults to Warning.
IPMI_FRU_State_FRU_Deactivation_In_Progress
Defaults to Warning.
IPMI_FRU_State_FRU_Communication_Lost
Defaults to Critical.
IPMI_OEM
The following configuration options can be used to configure OEM
system event log events. Interpretations rules for a specific
combination of Manufacturer-ID, Product-ID, and Record-Type, are
iterated through and the worst resulting sensor state is
returned (i.e. Warning < Nominal, Critical < Warning). If no
match is found, no state is returned for the OEM event.
For each of the configuration options below, <Manufacturer-ID>
is the numeric IANA manufacturer ID for the manufacturer in
question. The <Product-ID> is one or more numeric IDs
representing the manufacturer's product. The <Product-ID> can
be listed as a single numeric number (e.g. 1234), a range of IDs
separated by a dash (e.g. 12-20), or a list of specific product
IDs separted by a plus (e.g. 12+19+22). Both the Manufacturer-ID
and Product-ID can be found using bmc-info(8). Multiple
<Manufacturer-ID> and <Product-ID> pairs can be input separated
by commas.
IPMI_OEM_Sensor_System_Event_Record
<Manufacturer-ID>:<Product-ID>,... Event-Reading-Type-Code
Sensor-Type Event-Direction EventData1 EventData2 EventData3
State IPMI_OEM_System_Event_Record can be used to configure a
state interpretation for a specific Manufacturer-ID,
Product-ID, Event-Reading-Type-Code, and Sensor-Type
combination, and a specific Event-Direction, EventData1,
EventData2, and EventData3. The Event-Direction field
must specify Assertion, Deassertion, or ANY. Each of the
EventData fields must specify a hex byte to match or the
keyword ANY to match anything. The
Event-Reading-Type-Code and Sensor-Type need not be OEM
types. They may be non-OEM types and used to provide
interpretation rules for sensors that may be behaving
outside the standard of the IPMI specification.
IPMI_OEM_Timestamped_Record <Manufacturer-ID>:<Product-ID>,...
Record-Type OEMDATA1 OEMDATA2 OEMDATA3 OEMDATA4 OEMDATA5
OEMDATA6 State
IPMI_OEM_Timestamped_Record can be used to configure an
interpretation for a specific Manufacturer-ID,
Product-ID, Record-Type, and OEM data combination. The
Record-Type must be a legal record type for OEM
Timestamped Records (currently 0xC0-0xDF). Each of the
OEMDATA fields must specify a hex byte to match or the
keyword ANY to match anything.
IPMI_OEM_Non_Timestamped_Record
<Manufacturer-ID>:<Product-ID>,... Record-Type OEMDATA1 OEMDATA2
OEMDATA3 OEMDATA4 OEMDATA5 OEMDATA6 OEMDATA7 OEMDATA8 OEMDATA9
OEMDATA10 OEMDATA11 OEMDATA12 OEMDATA13 State
IPMI_OEM_Non_Timestamped_Record can be used to configure
an interpretation for a specific Manufacturer-ID,
Product-ID, Record-Type, and OEM data combination. The
Record-Type must be a legal record type for OEM Non-
Timestamped Records (currently 0xEO-0xFF). Each of the
OEMDATA fields must specify a hex byte to match or the
keyword ANY to match anything.
FILES
/usr/local/etc/freeipmi/freeipmi_interpret_sel.conf
REPORTING BUGS
Report bugs to <freeipmi-users@gnu.org> or <freeipmi-devel@gnu.org>.
COPYRIGHT
Copyright (C) 2007-2015 Lawrence Livermore National Security, LLC.
This library is free software; you can redistribute it and/or modify it
under the terms of the GNU General Public License as published by the
Free Software Foundation; either version 3 of the License, or (at your
option) any later version.
SEE ALSO
libfreeipmi(3), libipmimonitoring(3), ipmi-sel(8)
http://www.gnu.org/software/freeipmi/
FreeIPMI 1.5.1 2016-02-18 FREEIPMI_INTERPRET_SEL(5)