DragonFly On-Line Manual Pages
GDNSD.CONFIG(5) gdnsd GDNSD.CONFIG(5)
NAME
gdnsd.config - gdnsd configuration file
SYNOPSIS
options => {
log_stats => 86400
tcp_timeout => 15 ; zonefile-style comment
include_optional_ns => true
listen => [ 127.0.0.1, 192.0.2.1 ]
}
# shell-style comment
service_types => {
foosvc => { vhost => www.example.com, url_path => "/checkme" }
barsvc => $include{bar-svc.cfg}
$include{other-services.cfg}
}
plugins => {
null => {}
}
DESCRIPTION
This man page describes the syntax of the primary gdnsd configuration
file.
The lower-level syntax and structure of the configuration language is
described in detail at the end of this document, but it should be
fairly intuitive from the example above. It is effectively a generic
data structure language allowing arbitrarily-nested ordered hashes,
ordered arrays, and scalar values. Double-quotes are used to quote
scalars containing whitespace or various ambiguous metacharacters.
The top-level implicit hash of a gdnsd configuration file allows only 3
legal keys: options, service_types, and plugins.
Any of them which are present must have a Hash as their value.
All of them are optional, as is the configuration file itself. if
you're happy with an all-default configuration, you can simply not have
a config file at all.
OPTIONS HASH
These options control the overall behavior of gdnsd(8).
username
String, defaults to "gdnsd". This is the username the daemon drops
privileges to the uid/gid of on startup if started as root.
zones_default_ttl
Integer seconds, default 86400. This is the global default time-
to-live for any record in any zonefile. It can be overridden with
a more specific default within zone files themselves via the $TTL
directive (see gdnsd.zonefile(5)).
dns_port
Integer port, 1-65535, default 53. This is the global default port
number for DNS listener addresses which do not specify port numbers
themselves.
http_port
Integer port, 1-65535, default 3506. This is the default HTTP port
number for stats listener addresses which do not specify port
numbers themselves.
listen
The listen option specifies the socket addresses the server listens
on for DNS requests.
A listen-address specification is an IP (v4 or v6) address
specified as a numeric string with standard formatting (anything
numeric that "getaddrinfo()" supports on your platform), optionally
followed by a colon and a port number. If no port number is
specified, it defaults to the value from "dns_port", which defaults
to 53.
Due to various parsing ambiguities, if you wish to specify a non-
default port number for an IPv6 listen address, you will have to
enclose the address part in square brackets, and then enclose the
entire string in double-quotes.
The structure of the listen option as a whole can take one of three
basic forms. In its simplest form, it is just a single listen-
address specification as a string, such as:
options => { listen = 192.0.2.1 }
It can also take the form of an array of such addresses, as in:
options => {
listen = [
192.0.2.1,
192.0.2.2,
2001:DB8::1,
"[2001:DB8::1234]:5353",
]
}
Finally, it can also be a hash where the keys are listen addresses,
and the values are per-address options, as in:
options => {
listen => {
192.0.2.1 => {
tcp_timeout = 7
},
192.0.2.2:5353 => {
udp_threads = 5
},
}
}
The per-address options (which are identical to, and locally
override, the global option of the same name) are "tcp_threads",
"tcp_timeout", "tcp_clients_per_thread", "udp_threads",
"udp_recv_width", "udp_rcvbuf", and "udp_sndbuf".
There are also two special singalur string values: "any" and
"scan".
If set to "any", the daemon will listen on the "dns_port" port
(default 53) on 0.0.0.0 and "::" (if IPv6 support is detected).
options => { listen => any }
If set to "scan", scan all available IP (v4 and v6) network
interfaces via "getifaddrs()" and set up a separate listener on the
"dns_port" port (again, default 53) for each address found.
options => { listen => scan }
If the listen option isn't specified at all, for historical
compatibility reasons the current default is "scan". However, this
default is expected to change to "any" in a future version, so you
should specify "scan" explicitly if you require this behavior.
http_listen
Basically like listen above, but used for the HTTP listener
(serving stats information), and defaulting to port 3506. The hash
form isn't supported as there are no per-address options. Also,
the default addresses are the IPv4 and IPv6 (if supported) any-
addresses (0.0.0.0 and "::"), rather than the iterated per-
interface addresses that the DNS listener uses.
It makes common sense to restrict access to this service via
firewall rules, as the data served leaks information about the rate
and nature of your DNS traffic. This is mostly intended for your
own internal monitoring purposes.
tcp_threads
Integer, default 1, min 0, max 1024. This is the number of
separate TCP listening sockets and corresponding listener threads
that will be created for each DNS listener address. On a multi-
core host, increasing this parameter (up to at most a small
multiple of the CPU core count) may increase overall performance.
Note that on hosts without SO_REUSEPORT support (notably Linux <
3.9, Solaris), any setting greater than 1 will be forced to 1 with
a warning, as support multiple sockets/threads per-address are not
supported without SO_REUSEPORT.
udp_threads
Exactly like "tcp_threads", but for UDP sockets per DNS listening
address.
tcp_clients_per_thread
Integer, default 128, min 1, max 65535. This is maximum number of
tcp DNS connections gdnsd will allow to occur in parallel per
listening tcp socket. Once this limit is reached by a given
socket, no new connections will be allowed to that socket until one
of the existing ones closes or times out. Note that sockets map
1:1 to threads, and thus the total client limit for connecting to a
given address would be "tcp_clients_per_thread * tcp_threads" for a
given address.
tcp_timeout
Integer seconds, default 5, min 3, max 60. TCP DNS connections
will be forcibly shut down if they go idle without receiving and
responding to a valid query for this many seconds. gdnsd(8) allows
multiple requests per connection, and this idle timeout applies to
the time between requests as well.
udp_recv_width
Integer, default 8, min 1, max 64. On supported Linux kernels this
setting tunes the use of more efficient interfaces to receive and
send multiple packets with a single syscall. Higher values reduce
syscall overhead and generally give the server higher throughput
and better efficiency under high loads.
I believe that this is basically always a win under load when
supported, but values much larger than necessary do have a chance
to increase average response latency very slightly. The optimal
setting is highly dependent on local hardware, software
configuration, and network load conditions.
Setting this to a value of 1 will completely disable this code, as
if we were running on a platform that didn't support it. On
platforms that don't support it, this option has no effect and is
ignored. On Linux if we don't detect a 3.0 or higher kernel at
runtime, we fall back to the same code as other platforms that
don't support it.
udp_rcvbuf
Integer, min 4096, max 1048576. If set, this value will be used to
set the "SO_RCVBUF" socket option on the UDP listening socket(s).
Most users do not need to tune this value. If left unset, the code
only takes a somewhat heuristic approach, trying to raise the value
only if the OS-supplied default seems too low, and multiplying it a
bit in the case of "udp_recv_width" > 1.
udp_sndbuf
Integer, min 4096, max 1048576. If set, this value will be used to
set the "SO_SNDBUF" socket option on the UDP listening socket(s).
Tuning advice mirrors the above.
max_http_clients
Integer, default 128, min 1, max 65535. Maximum number of HTTP
connections to allow in parallel at any given time. Once this
number is reached, no more new connections will be answered until
an existing connection closes or times out.
http_timeout
Integer seconds, default 5, min 3, max 60. HTTP connections will
be forcibly shut down if they go idle for more than this many
seconds.
zones_strict_data
Boolean, default "false"
If false (the default), reporting of many less-serious errors in
zone data are emitted as mere logged warnings, and the zone data is
still loaded and served.
If this is set to true, such warnings will be upgraded and treated
the same as the more-serious class of zone data errors which
prevent successful loading of zone data. The consequences of this
are variable: on initial startup or checkconf, this results in a
fatal error (failure to start, or non-zero exit code,
respectively). During a runtime zone data reload, any existing
good copy of the zone would continue to be served until the error
is corrected in the source.
zones_strict_startup
Boolean, default "true"
If true (the default), on daemon startup (via "start" or "restart")
if any zone fails to load correctly, the daemon will abort. If
false, the daemon will simply ignore the failed zone and continue
operations.
Runtime reloads via SIGHUP and/or periodic/inotify scanning always
treat bad zone data non-fatally (leaving any existing good copy
intact in memory for lookups).
This also affects the "checkconf" action. It will only fail in
terms of exit value on bad zonefiles if this is true (although it
will note any failures to stderr regardless).
zones_rfc1035_auto
Boolean, default "true".
If auto is enabled (the default), the daemon will detect changes to
zone data automatically at runtime and apply them as they appear.
In the general case this is done via periodically scanning
"lstat()" data on the contents of the zones directory and looking
for metadata changes since last check.
On recent Linux systems, the daemon may also use "inotify()" to
detect filesystem modifications in realtime and not need to run the
periodic full directory scan, making the average delay much smaller
(subject to compile- and run- time compatibility). You will need a
runtime Linux kernel version of 2.6.36 or higher to enable this
feature.
Regardless of whether this setting is true or false, you can always
manually trigger a rescan of the zones directory for new data by
sending the daemon a "SIGHUP" (or executing the "reload" command /
initscript action, which sends SIGHUP for you).
zones_rfc1035_auto_interval
Integer seconds, default 31, min 10, max 600. Only applies when
"zones_rfc1035_auto" is "true".
Sets the time interval for periodically checking the zonefile
directory for changes. On systems which support "inotify()",
however, the automatic mode will almost always use that mechanism
instead for even faster detection with less overhead. In the
"inotify()" case, the interval is used only occasionally when
recovering from temporary "inotify()" failures.
zones_rfc1035_min_quiesce
Floating-point seconds, default 0.0, min 0.0, max 5.0
This short-duration quiescence timeout applies to certain internal
cases when validating zonefile update activity. (Specifically:
delays after "inotify()" events for atomic move/delete and delayed
initial zonefile loading on daemon startup).
At daemon start, a heuristic test of the mtime resolution on the
zones filesystem will determine whether we can use a faster 0.01s
or the default 1.02s as a basic sane minimum, and this config
setting will be adjusted upwards to the detected minimum as
necessary.
Most users should not need to mess with this setting! The only
reason to do so would be if you suspected operating system or
filesystem bugs related to high-res mtimes (or bugs so severe that
even ~1-second mtime resolution isn't reliable, in which case you
might want to try values in the 3-5s range, or just find a new FS
and/or OS...).
zones_rfc1035_quiesce
Floating-point seconds, default 5.0, min 0.0, max 60.0
This timer is related to the above, but is used in cases where
we're not only worried about filesystem-level timestamp accuracy,
but also waiting for additional intentional actions by scripts,
programs, or users which might be actively modifying a zonefile.
It applies to all changes detected via SIGHUP or periodic automatic
scanning, and to "inotify()" events which do not indicate atomic
operations (e.g. create/write/close, rather than move/delete. In
other words, someone/something is actually overwriting the data in-
place or using an editor on the file in-place).
It is recommended that whatever tools or scripts you use to manage
zonefile updates use atomic operations to replace them. First
write the new data to a dotfile, e.g. .example.com.tmp1234, in the
same zones directory (gdnsd ignores all filenames with a leading
dot), and then mv(1) / rename(2) the file to its final destination
filename example.com.
If the value specified is less than the final runtime value of
"zones_rfc1035_min_quiesce" above, it will be adjusted upwards to
that minimum value for correct operation.
lock_mem
Boolean, default false. Causes the daemon to do
"mlockall(MCL_CURRENT|MCL_FUTURE)", which effectively locks all
daemon memory into RAM, unable to be swapped. Possibly helpful in
some production cases to ensure swap-in doesn't affect DNS latency.
When started as root with lock_mem set to true, the daemon will
remove any ulimits on locked memory before dropping privileges.
When started as a regular user it may not be able to do so, and
those limits could cause the server to abort execution at any time
if they are set too low.
priority
Signed integer, range -20 to +20, lower values are higher priority.
If explicitly set, gdnsd will attempt "setpriority()" to this value
on startup. If left unset and gdnsd is started as a normal user,
no "setpriority()" call will be made. If left unset and gdnsd is
started as root, it will default to calling "setpriority()" with
the value "-11".
disable_text_autosplit
Boolean, default false. On the wire, "TXT" (and "SPF", which are
identical in wire-format other than the RR-type) records are
encoded as discrete chunks of up to 255 characters per chunk. The
relevant RFCs state that multiple chunks should be treated by
clients as if they are concatenated. That is to say, it should
make no difference to a client whether the "TXT" data is sent as
two 16-byte chunks or one 32-byte chunk.
Ordinarily, you may specify chunk(s) of a "TXT" record in gdnsd
zonefiles as a string of any size up to the legal length (just
short of 64K in practice), and gdnsd will auto-split the data into
255-byte chunks for transmission over the DNS protocol correctly.
If you choose to manually break up your TXT record into multiple
strings in the zonefile, gdnsd also honors these boundaries and
will not attempt to merge them into larger chunks where possible.
If you set this option to true, the auto-splitting behavior is
disabled, and any single character string specified in a zonefile
as part of a "TXT" or "SPF" record which is larger than 255 bytes
will be considered a syntax error.
include_optional_ns
Boolean, default false. Causes the daemon to include the optional
NS records in the Authority section of simple authoritative
responses containing actual response data. Leaving this option in
its default state results in smaller response packets and faster
response packet generation in many common cases. This is similar
in nature to (but not exactly like) BIND's "minimal-responses"
option, except that we default to the minimal mode.
Regardless of this setting, all *necessary* Authority-section
records are always included, such as when they are necessary for
delegation responses, NXDOMAIN responses, and NOERROR responses
containing no RRsets in the answer section.
plugin_search_path
A single string or an array of strings, default empty. Normally
the daemon searches for plugins in the fixed path
"$PREFIX/lib/gdnsd", using filenames of the form
"plugin_${name}.so". If you define this parameter, all paths in
this list will be searched in the given order for plugins *before*
trying the default, fixed search path.
realtime_stats
Boolean, default false. Normally the daemon self-imposes a limit
of not recalculating the daemon-wide statistics more often than
once per second. This improves efficiency in the case that the
polling traffic on our HTTP interface gets high.
For most uses the default should be fine. If you set this option
to true, the stats will be recalculated on the spot for every stats
request. The test suite uses this so that it can double-check
statistics counters between every request it sends. I don't
imagine anyone else will need to use this option, and it could even
be determinental to performance on SMP machines.
max_response
Integer, default 16384, min 4096, max 62464. This number is used
to size the per-I/O-thread buffers that we construct response
packets in. For any sane, normal use of the DNS, the default value
is far more than enough. For embedded or other low memory hosts,
you might even consider setting this smaller than default to save a
bunch of per-socket-context buffer space.
However, if you have strange DNS data that's very large (giant
RRsets, giant blobs of data in TXT records) which might generate
response packets greater than the 16K default max here, you *must*
set this parameter large enough to accommodate them or random very
bad things will happen. It should be noted that the odds are high
whatever you're trying to do is misguided in the first place. You
can size this by setting it to the max and running some test
queries via "dig" (or a similar tool) to find your limit.
This number does not need to take into account UDP, IP, or any
lower-level headers. Typically when probing your data for the
largest response sizes you should do "ANY" queries and/or specific
RR-type queries against the first CNAME in any CNAME chains leading
to large RR-sets. Keep in mind that the "include_optional_ns"
option will affect the sizing as well. Also keep in mind that
wildcards and delegations can match any child name, including ones
of maximal overall length.
max_addtl_rrsets
Integer, default 64, min 16, max 256. This is the maximum number
of RR sets that will ever be added to the Additional section of a
response packet. This sets a hard limit on the number of
delegation glue NS records a subzone can have (which is checked at
startup), and a runtime soft limit on other Additional section RR
sets. When the limit is reached at runtime, the remaining
potential additional RR sets are simply not added to the packet.
Most users won't need to raise this value, and users on
low-memory/embedded hosts might want to lower it to save more
memory.
max_cname_depth
Integer, default 16, min 4, max 24. How deep CNAME -> CNAME chains
are allowed to recurse within local data in a single zonefile. If
a chain longer than this is detected between normal static CNAME
entries in the authoritative data of a single zonefile, an error
will be thrown when loading the zonefile.
If the limit is exceeded at runtime (due to "DYNC" dynamic CNAME
responses) the code will halt further recursive lookups for this
request and return an empty NXDOMAIN response, and log a loud
message to syslog on every single request for this broken
domainname.
Note that this is the only thing preventing infinite CNAME loops
caused by bad DYNC plugin configurations. Also note that even in
the "DYNC" case, all of this applies only within a single zone.
The gdnsd code never crosses the boundary between two distinct
local zonefiles when processing queries.
debug
Boolean, default false. If (and only if) gdnsd was built in debug
mode (--enable-developer, which slows things down with a ton of
assertion checks among other things), setting this option to "true"
will cause additional debugging output to syslog/stderr.
edns_client_subnet
Boolean, default true. Enables support for the edns-client-subnet
option. gdnsd only includes this EDNS option in responses to
queries which also contained the option. In the case of normal
responses from static zone data, the scope mask will be set to
zero. Dynamic response plugins have access to the query's EDNS
client-subnet data, and have full control over the response scope
mask.
If the option is set to false, gdnsd will ignore the option in
queries, never set it in its responses, and plugins will not have
access to any data provided by any ignored edns-client-subnet
option in queries.
Of the included standard plugins only "reflect" and "geoip" make
use of edns-client-subnet information. The rest will leave the
scope mask at zero as normal for client-location-agnostic static
data.
Relevant links documenting edns-client-subnet:
<http://www.afasterinternet.com/>
<http://tools.ietf.org/html/draft-vandergaast-edns-client-subnet-00>
monitor_force_v6_up
Boolean, default false. Forces all monitored resources with IPv6
addresses permanently to the UP state, and does not actually send
them monitoring requests. Useful if some of your DNS servers don't
have working or reliable IPv6 routing, which would otherwise fail
IPv6 polls and force the related addresses to be marked DOWN. A
better alternative would be to only host DNS for v6-capable
services on v6-capable DNS hosts, or install a
Tunnelbroker/Sixxs/Teredo/Miredo/etc tunnel to get v6 routability.
"chaos_response"
String, default "gdnsd". When gdnsd receives any query with the
class "CH" ("Chaos"), as opposed to the normal "IN" ("Internet"),
it will return a single response record of class "CH" and type
"TXT", which contains the string defined here. This is something
like BIND's version reporting, which responds to "version.bind"
queries in the "CH" class, and is what a client will see if they
use such a query against a gdnsd server.
SERVICE_TYPES
service_types is used in conjunction with certain gdnsd plugins. If
you are not using such a plugin, you can safely ignore this section and
omit it from your configuration.
The service_types hash contains generic definitions for how to monitor
the given types of service. Each service type uses a protocol-specific
plugin, and the default is the included plugin "http_status", which
checks HTTP status code responses.
The other included monitoring plugins are "tcp_connect" (documented
below alongside "http_status", just checks TCP), and "extmon", which
executes external monitoring commands/scripts and has its own
documentation at gdnsd-plugin-extmon(8).
There are several generic parameters related to timing and anti-flap,
as well as plugin-specific parameters that vary per plugin.
A service type does not, however, specify a name or address for a
specific instance of a service. Those would occur on a per-address
basis in a resolving plugin's configuration down in the "plugins"
stanza, and the plugin's configuration would then reference a named
service type to be used when monitoring said address.
A service monitored through these mechanisms can be in one of three
states at runtime: "UP", "DANGER", or "DOWN". The UP state means that
all is perfectly well. The DANGER state means that some isolated
failures have been seen in the recent past (perhaps even just one), but
that gdnsd has not yet seen a consistent enough pattern of failure to
declare the service dead. The DOWN state, obviously, means that gdnsd
does consider the service dead. These states are presented to the
plugin that requested the monitoring. It is up to the plugin to
determine how this affects DNS responses.
Any services monitored for plugins are also have their state reported
alongside the standard gdnsd statistics report, served by the built-in
HTTP server (default port is 3506).
There are five built-in service types that can't be overridden:
One built-in service type is implicitly named "default". It uses the
default "http_status" plugin and is defined to all of the default
parameters shown below.
The other four are named "none", "up", "danger", and "down".
These do no actual monitoring, and simply force the state of resources
using these service_types to a fixed state. "none" is just an alias
for "up".
The following are the generic parameters for all service_types:
up_thresh
Integer, default 20, min 1, max 255. Number of monitoring requests
which must succeed with no intervening failures to transition a
given IP for this resource from the DOWN state to the UP state.
ok_thresh
Integer, default 10, min 1, max 255. Number of monitoring requests
which must succeed with no intervening failures to transition a
given IP for this resource from the DANGER state to the UP state.
down_thresh
Integer, default 10, min 1, max 255. Number of monitoring requests
which must fail, regardless of any intervening successes, to
transition a given IP for this resource from the DANGER state to
the DOWN state.
interval
Integer seconds, default 10, min 1, max 255. Number of seconds
between successive monitoring requests to a given IP address for
this resource.
timeout
Integer seconds, default 3, min 1, max 255. Maximum time the
monitoring code will wait for a successful response before giving
up and considering the request to be a failure. Must be less than
90% of interval.
plugin
String, default "http_status". This indicates which protocol-
specific plugin to use to execute the monitoring requests. Any
parameters other than the generic ones listed here are consumed by
the plugin.
The "tcp_connect" plugin has just one plugin-specific parameter:
port
Integer, required. This is the port number to contact on the
remote host to check this service type. It has no default and must
be specified.
The following are the plugin-specific parameters for the default
monitoring plugin "http_status":
port
Integer, default 80. This is the port number to contact on the
remote host to check this service type.
url_path
String, default "/". This is the URL that should be used when
checking this service type.
vhost
Hostname, no default. If defined, the HTTP/1.0 monitoring request
will include this as a "Host:" header in the monitoring request.
If not defined, no "Host:" header will be sent.
ok_codes
Array of 3-digit HTTP status codes, default "[ 200 ]". This
defines the HTTP status codes in responses that will be accepted as
successful.
PLUGINS
The plugins hash is optional, and contains one key for every dynamic
resolution plugin you wish to load and use. The value must be a hash,
and the contents of that hash are supplied to the plugin to use in
configuring itself. If the plugin requires no configuration, the empty
hash "{}" will suffice. It is up to the plugin to determine whether
the supplied hash of configuration data is legal or not.
Monitoring-only plugins can also be given plugin-global level
configuration here if the plugin author deemed it necessary.
gdnsd ships with 3 very trivial dynamic resolution plugins named
"null", "static", and "reflect".
"null" simply returns all-zeros addresses for DYNA records, and
"invalid." as the RHS of DYNC records. It does not pay attention to
any plugin-specific configuration.
The "static" plugin can be configured with a map of resource names to
IPv4 addresses or CNAME hostnames, and it will do the obvious: map
those resource names statically for use in either DYNA or DYNC zonefile
records.
"reflect" is primarily for real-world testing and debugging. It
attempts to reflect back to the query originator an address answer
showing the server's view of where the client is located on the
network. Currently in the common case this will be the address of the
intermediate cache server which communicated directly with gdnsd.
However, if the query contains the draft edns-client-subnet option, the
response can reflect that as well.
It accepts 4 fixed resource names at the zonefile level: "dns", "edns",
"best", and "both". "dns" means to ignore edns-client-subnet and
always return the cache's address. "edns" means to ignore the cache's
address and always return edns-client-subnet information, (or 0.0.0.0
if not available). "best" will return the edns-client-subnet
information if available, or the cache's address if not. "both"
returns both addresses if edns-client-subnet is available, or just the
cache otherwise. The default behavior is "best".
gdnsd also includes five other plugins that are more production-useful,
all of which have their own separate manpage documentation (e.g. "man
gdnsd-plugin-FOO"):
simplefo
Simple primary->secondary failover of monitored addresses
multifo
All-active failover of monitored round-robin address groups
weighted
Weighted-round-robin responses with a variety of behavioral
flavors, for both monitored addresses and CNAMEs
metafo
Static-ordered address(-group) meta-failover between 'datacenters',
which are resources defined in terms of other plugins
geoip
Combines metafo's functionality with MaxMind GeoIP databases to
select different datacenter address(-group) preference/failover
orderings for different clients based on approximate geographic
location. Supports geographically-differentiated CNAME resolution
as well.
A configuration example showing the trivial plugins, as well as
demonstrating the service_types described earlier:
service_types => {
corpwww_type => {
vhost => www.corp.example.com
url_path => /check_me
down_thresh => 5
interval => 5
}
}
plugins => {
null => {},
reflect => {},
static => {
foo = 192.0.2.2
bar = 192.0.2.123
somehost = somehost.example.net.
},
}
And then in your example.com zonefile, you could have (among your other
RRs):
zeros 600 DYNA null
reflect 10 DYNA reflect
reflect-both 10 DYNA reflect!both
pointless 42 DYNA static!foo
acname 400 DYNC static!somehost
LOW-LEVEL SYNTAX
At the lowest level, the syntax of gdnsd config files roughly resembles
an anonymous Perl data structure (using reference syntax). There are
three basic data types for values: ordered hashes (associative arrays
mapping keys to values), ordered arrays of values, and simple strings.
Hashes and arrays can be nested to arbitrary depth. Generally
speaking, whitespace is optional. Single-line comments in both shell
("#") and DNS zonefile styles (";") are allowed. They run to the end
of the current line and are considered to be whitespace by the parser.
A hash is surrounded by curly braces ("{" and "}"). Keys are separated
from their values by either "=>" or "=" (at your stylistic discretion).
Hash keys follow the same rules as simple string values. Hash values
can be simple strings, arrays, or hashes. Key/value pairs can
optionally have a trailing comma for stylistic clarity and separation.
An array is surrounded by square braces ("[" and "]"). Values can be
simple strings, arrays, or hashes. Values can optionally have a
trailing comma for style.
Strings (and thus keys) can be written in both quoted and unquoted
forms. In the quoted form, the string is surrounded by double-quotes
("""), and can contain any literal byte value (even binary/utf-8 stuff,
or NUL) other than """ or "\". Those two characters must be escaped by
"\", i.e. "\"" and "\\".
In the unquoted form, there are no surrounding quotes, and the allowed
set of unescaped characters is further restricted. The following are
not allowed: "][}{;#,"=\" (that is, square brackets, curly brackets,
semicolons, octothorpes, commas, double quotes, equal signs, and
backslashes). Additionally, the first character cannot be a "$"
(dollar sign).
Both forms use the same escaping rules, which are the same RFC-standard
escaping rules used in zone files. The escapes always start with "\".
"\" followed by any single byte other than a digit (0 - 9) is
interepreted as that byte. "\" followed by exactly 3 digits interprets
those digits as the unsigned decimal integer value of the desired byte
(the 3 digit value cannot exceed 255).
To illustrate the escaping and quoting, the following sets of example
strings show different encodings of the same parsed value:
example
"example"
ex\097mpl\e
"ex\097mpl\e"
internal\"doublequote
"internal\"doublequote"
white\ space
"white space"
"braces{every[where]oh}my"
braces\{every\[where\]oh\}my
"\\==="
"\092==="
"\092\=\=\="
\\\=\=\=
\092\=\=\=
The top level of the config file is an implicit hash with no bracing by
default, but can also be an array bounded by square brackets. This is
not legal for the primary gdnsd configuration file, but could be useful
in includefiles (see below).
As a general rule, anywhere the higher-level syntax allows an array of
values, you can substitute a single value. The code will treat it as
if it were an array of length 1.
When we refer in other sections above to a value as being an "Integer"
(or other specific scalar type), we're referring to constraints on the
content of the character string value. All scalar values are character
strings. "Boolean" values are characters strings which have the value
"true" or "false", in any mix of upper or lower case.
The following 3 example configuration files are identical in their
parsed meanings, and should clarify anything miscommunicated above:
Example 1 (simple and clean):
options = {
listen = [ 192.0.2.1, 192.0.2.2 ],
http_listen = 127.0.0.1,
}
Example 2 (fat arrows, no commas, some arbitrary quoting):
"options" => {
listen => [ 192.0.2.1 192.0.2.2 ]
http_listen => "127.0.0.1"
}
Example 3 (compressed and ugly):
options={listen=[192.0.2.1 192.0.2.2]http_listen=127.0.0.1}
INCLUDING OTHER FILES
vscf now has a mechanism for config includefiles. The syntax is
$include{filename}
where "filename" can use the same kinds of escaping and/or double-
quoting as normal scalar string data. Whitespace between the filename
and the surrounding brackets is optional. Whitespace between $include
and the following "{" is not. If the filename is relative (does not
begin with /), it is interpreted as relative to the directory
containing the parent file. Include files can nest other include files
to arbitrary depth.
Keep in mind that at the top level of any given vscf file (even include
files), the file must syntactically be either an implicit hash or an
explicit, square-bracket-bounded, array.
The include statement can be used in two distinct contexts within the
syntax structure of a config file:
Value Context
The include statement can replace any whole value (that is, the
right hand side of a hash map entry or a member of an array) with
its own contents, which are either a hash or an array. Note that
there is no mechanism for flattening an include-file's array into
the parent array (the whole included array would be a single array
item within the parent array). Examples:
main config:
options => { listen => $include{foo} }
foo:
[ 127.0.0.1, 127.0.0.2 ]
main config:
plugins => $include{ "bar" }
bar:
geoip => { ... }
extmon => { ... }
Hash-Merge Context
The include statement can also appear in a hash where a key would
normally be expected. In this case, the included file must be in
hash (rather than array) form at the top level, and its contents
are merged into the parent hash. Example:
main config:
options => { ... },
plugins => {
extmon => { ... },
metafo => { ... },
$include{geoip_cfg},
simplefo => { ... }
}
geoip_cfg:
geoip => { ... },
weighted => { ... }
SEE ALSO
gdnsd(8), gdnsd.zonefile(5), gdnsd-plugin-simplefo(8),
gdnsd-plugin-multifo(8), gdnsd-plugin-weighted(8),
gdnsd-plugin-metafo(8), gdnsd-plugin-geoip(8), gdnsd-plugin-extmon(8),
gdnsd-plugin-api(3)
The gdnsd manual.
COPYRIGHT AND LICENSE
Copyright (c) 2012 Brandon L Black <blblack@gmail.com>
This file is part of gdnsd.
gdnsd is free software: you can redistribute it and/or modify it under
the terms of the GNU General Public License as published by the Free
Software Foundation, either version 3 of the License, or (at your
option) any later version.
gdnsd is distributed in the hope that it will be useful, but WITHOUT
ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
for more details.
You should have received a copy of the GNU General Public License along
with gdnsd. If not, see <http://www.gnu.org/licenses/>.
gdnsd 1.11.4 2014-07-18 GDNSD.CONFIG(5)