DragonFly On-Line Manual Pages
GIT-INTERPRET-TRAILERS(1) Git Manual GIT-INTERPRET-TRAILERS(1)
NAME
git-interpret-trailers - Add or parse structured information in commit
messages
SYNOPSIS
git interpret-trailers [--in-place] [--trim-empty]
[(--trailer <token>[(=|:)<value>])...]
[--parse] [<file>...]
DESCRIPTION
Help parsing or adding trailers lines, that look similar to RFC 822
e-mail headers, at the end of the otherwise free-form part of a commit
message.
This command reads some patches or commit messages from either the
<file> arguments or the standard input if no <file> is specified. If
--parse is specified, the output consists of the parsed trailers.
Otherwise, this command applies the arguments passed using the
--trailer option, if any, to the commit message part of each input
file. The result is emitted on the standard output.
Some configuration variables control the way the --trailer arguments
are applied to each commit message and the way any existing trailer in
the commit message is changed. They also make it possible to
automatically add some trailers.
By default, a <token>=<value> or <token>:<value> argument given using
--trailer will be appended after the existing trailers only if the last
trailer has a different (<token>, <value>) pair (or if there is no
existing trailer). The <token> and <value> parts will be trimmed to
remove starting and trailing whitespace, and the resulting trimmed
<token> and <value> will appear in the message like this:
token: value
This means that the trimmed <token> and <value> will be separated by ':
' (one colon followed by one space).
By default the new trailer will appear at the end of all the existing
trailers. If there is no existing trailer, the new trailer will appear
after the commit message part of the output, and, if there is no line
with only spaces at the end of the commit message part, one blank line
will be added before the new trailer.
Existing trailers are extracted from the input message by looking for a
group of one or more lines that (i) is all trailers, or (ii) contains
at least one Git-generated or user-configured trailer and consists of
at least 25% trailers. The group must be preceded by one or more empty
(or whitespace-only) lines. The group must either be at the end of the
message or be the last non-whitespace lines before a line that starts
with --- (followed by a space or the end of the line). Such three minus
signs start the patch part of the message. See also --no-divider below.
When reading trailers, there can be no whitespace before or inside the
token, but any number of regular space and tab characters are allowed
between the token and the separator. There can be whitespaces before,
inside or after the value. The value may be split over multiple lines
with each subsequent line starting with at least one whitespace, like
the "folding" in RFC 822.
Note that trailers do not follow and are not intended to follow many
rules for RFC 822 headers. For example they do not follow the encoding
rules and probably many other rules.
OPTIONS
--in-place
Edit the files in place.
--trim-empty
If the <value> part of any trailer contains only whitespace, the
whole trailer will be removed from the resulting message. This
applies to existing trailers as well as new trailers.
--trailer <token>[(=|:)<value>]
Specify a (<token>, <value>) pair that should be applied as a
trailer to the input messages. See the description of this command.
--where <placement>, --no-where
Specify where all new trailers will be added. A setting provided
with --where overrides all configuration variables and applies to
all --trailer options until the next occurrence of --where or
--no-where. Possible values are after, before, end or start.
--if-exists <action>, --no-if-exists
Specify what action will be performed when there is already at
least one trailer with the same <token> in the message. A setting
provided with --if-exists overrides all configuration variables and
applies to all --trailer options until the next occurrence of
--if-exists or --no-if-exists. Possible actions are addIfDifferent,
addIfDifferentNeighbor, add, replace and doNothing.
--if-missing <action>, --no-if-missing
Specify what action will be performed when there is no other
trailer with the same <token> in the message. A setting provided
with --if-missing overrides all configuration variables and applies
to all --trailer options until the next occurrence of --if-missing
or --no-if-missing. Possible actions are doNothing or add.
--only-trailers
Output only the trailers, not any other parts of the input.
--only-input
Output only trailers that exist in the input; do not add any from
the command-line or by following configured trailer.* rules.
--unfold
Remove any whitespace-continuation in trailers, so that each
trailer appears on a line by itself with its full content.
--parse
A convenience alias for --only-trailers --only-input --unfold.
--no-divider
Do not treat --- as the end of the commit message. Use this when
you know your input contains just the commit message itself (and
not an email or the output of git format-patch).
CONFIGURATION VARIABLES
trailer.separators
This option tells which characters are recognized as trailer
separators. By default only : is recognized as a trailer separator,
except that = is always accepted on the command line for
compatibility with other git commands.
The first character given by this option will be the default
character used when another separator is not specified in the
config for this trailer.
For example, if the value for this option is "%=$", then only lines
using the format <token><sep><value> with <sep> containing %, = or
$ and then spaces will be considered trailers. And % will be the
default separator used, so by default trailers will appear like:
<token>% <value> (one percent sign and one space will appear
between the token and the value).
trailer.where
This option tells where a new trailer will be added.
This can be end, which is the default, start, after or before.
If it is end, then each new trailer will appear at the end of the
existing trailers.
If it is start, then each new trailer will appear at the start,
instead of the end, of the existing trailers.
If it is after, then each new trailer will appear just after the
last trailer with the same <token>.
If it is before, then each new trailer will appear just before the
first trailer with the same <token>.
trailer.ifexists
This option makes it possible to choose what action will be
performed when there is already at least one trailer with the same
<token> in the message.
The valid values for this option are: addIfDifferentNeighbor (this
is the default), addIfDifferent, add, replace or doNothing.
With addIfDifferentNeighbor, a new trailer will be added only if no
trailer with the same (<token>, <value>) pair is above or below the
line where the new trailer will be added.
With addIfDifferent, a new trailer will be added only if no trailer
with the same (<token>, <value>) pair is already in the message.
With add, a new trailer will be added, even if some trailers with
the same (<token>, <value>) pair are already in the message.
With replace, an existing trailer with the same <token> will be
deleted and the new trailer will be added. The deleted trailer will
be the closest one (with the same <token>) to the place where the
new one will be added.
With doNothing, nothing will be done; that is no new trailer will
be added if there is already one with the same <token> in the
message.
trailer.ifmissing
This option makes it possible to choose what action will be
performed when there is not yet any trailer with the same <token>
in the message.
The valid values for this option are: add (this is the default) and
doNothing.
With add, a new trailer will be added.
With doNothing, nothing will be done.
trailer.<token>.key
This key will be used instead of <token> in the trailer. At the end
of this key, a separator can appear and then some space characters.
By default the only valid separator is :, but this can be changed
using the trailer.separators config variable.
If there is a separator, then the key will be used instead of both
the <token> and the default separator when adding the trailer.
trailer.<token>.where
This option takes the same values as the trailer.where
configuration variable and it overrides what is specified by that
option for trailers with the specified <token>.
trailer.<token>.ifexists
This option takes the same values as the trailer.ifexists
configuration variable and it overrides what is specified by that
option for trailers with the specified <token>.
trailer.<token>.ifmissing
This option takes the same values as the trailer.ifmissing
configuration variable and it overrides what is specified by that
option for trailers with the specified <token>.
trailer.<token>.command
This option behaves in the same way as trailer.<token>.cmd, except
that it doesn't pass anything as argument to the specified command.
Instead the first occurrence of substring $ARG is replaced by the
value that would be passed as argument.
The trailer.<token>.command option has been deprecated in favor of
trailer.<token>.cmd due to the fact that $ARG in the user's command
is only replaced once and that the original way of replacing $ARG
is not safe.
When both trailer.<token>.cmd and trailer.<token>.command are given
for the same <token>, trailer.<token>.cmd is used and
trailer.<token>.command is ignored.
trailer.<token>.cmd
This option can be used to specify a shell command that will be
called: once to automatically add a trailer with the specified
<token>, and then each time a --trailer <token>=<value> argument to
modify the <value> of the trailer that this option would produce.
When the specified command is first called to add a trailer with
the specified <token>, the behavior is as if a special --trailer
<token>=<value> argument was added at the beginning of the "git
interpret-trailers" command, where <value> is taken to be the
standard output of the command with any leading and trailing
whitespace trimmed off.
If some --trailer <token>=<value> arguments are also passed on the
command line, the command is called again once for each of these
arguments with the same <token>. And the <value> part of these
arguments, if any, will be passed to the command as its first
argument. This way the command can produce a <value> computed from
the <value> passed in the --trailer <token>=<value> argument.
EXAMPLES
o Configure a sign trailer with a Signed-off-by key, and then add two
of these trailers to a message:
$ git config trailer.sign.key "Signed-off-by"
$ cat msg.txt
subject
message
$ git interpret-trailers --trailer 'sign: Alice <alice@example.com>' --trailer 'sign: Bob <bob@example.com>' <msg.txt
subject
message
Signed-off-by: Alice <alice@example.com>
Signed-off-by: Bob <bob@example.com>
o Use the --in-place option to edit a message file in place:
$ cat msg.txt
subject
message
Signed-off-by: Bob <bob@example.com>
$ git interpret-trailers --trailer 'Acked-by: Alice <alice@example.com>' --in-place msg.txt
$ cat msg.txt
subject
message
Signed-off-by: Bob <bob@example.com>
Acked-by: Alice <alice@example.com>
o Extract the last commit as a patch, and add a Cc and a Reviewed-by
trailer to it:
$ git format-patch -1
0001-foo.patch
$ git interpret-trailers --trailer 'Cc: Alice <alice@example.com>' --trailer 'Reviewed-by: Bob <bob@example.com>' 0001-foo.patch >0001-bar.patch
o Configure a sign trailer with a command to automatically add a
'Signed-off-by: ' with the author information only if there is no
'Signed-off-by: ' already, and show how it works:
$ cat msg1.txt
subject
message
$ git config trailer.sign.key "Signed-off-by: "
$ git config trailer.sign.ifmissing add
$ git config trailer.sign.ifexists doNothing
$ git config trailer.sign.cmd 'echo "$(git config user.name) <$(git config user.email)>"'
$ git interpret-trailers --trailer sign <msg1.txt
subject
message
Signed-off-by: Bob <bob@example.com>
$ cat msg2.txt
subject
message
Signed-off-by: Alice <alice@example.com>
$ git interpret-trailers --trailer sign <msg2.txt
subject
message
Signed-off-by: Alice <alice@example.com>
o Configure a fix trailer with a key that contains a # and no space
after this character, and show how it works:
$ git config trailer.separators ":#"
$ git config trailer.fix.key "Fix #"
$ echo "subject" | git interpret-trailers --trailer fix=42
subject
Fix #42
o Configure a help trailer with a cmd use a script glog-find-author
which search specified author identity from git log in git
repository and show how it works:
$ cat ~/bin/glog-find-author
#!/bin/sh
test -n "$1" && git log --author="$1" --pretty="%an <%ae>" -1 || true
$ cat msg.txt
subject
message
$ git config trailer.help.key "Helped-by: "
$ git config trailer.help.ifExists "addIfDifferentNeighbor"
$ git config trailer.help.cmd "~/bin/glog-find-author"
$ git interpret-trailers --trailer="help:Junio" --trailer="help:Couder" <msg.txt
subject
message
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Christian Couder <christian.couder@gmail.com>
o Configure a ref trailer with a cmd use a script glog-grep to grep
last relevant commit from git log in the git repository and show
how it works:
$ cat ~/bin/glog-grep
#!/bin/sh
test -n "$1" && git log --grep "$1" --pretty=reference -1 || true
$ cat msg.txt
subject
message
$ git config trailer.ref.key "Reference-to: "
$ git config trailer.ref.ifExists "replace"
$ git config trailer.ref.cmd "~/bin/glog-grep"
$ git interpret-trailers --trailer="ref:Add copyright notices." <msg.txt
subject
message
Reference-to: 8bc9a0c769 (Add copyright notices., 2005-04-07)
o Configure a see trailer with a command to show the subject of a
commit that is related, and show how it works:
$ cat msg.txt
subject
message
see: HEAD~2
$ cat ~/bin/glog-ref
#!/bin/sh
git log -1 --oneline --format="%h (%s)" --abbrev-commit --abbrev=14
$ git config trailer.see.key "See-also: "
$ git config trailer.see.ifExists "replace"
$ git config trailer.see.ifMissing "doNothing"
$ git config trailer.see.cmd "glog-ref"
$ git interpret-trailers --trailer=see <msg.txt
subject
message
See-also: fe3187489d69c4 (subject of related commit)
o Configure a commit template with some trailers with empty values
(using sed to show and keep the trailing spaces at the end of the
trailers), then configure a commit-msg hook that uses git
interpret-trailers to remove trailers with empty values and to add
a git-version trailer:
$ cat temp.txt
***subject***
***message***
Fixes: Z
Cc: Z
Reviewed-by: Z
Signed-off-by: Z
$ sed -e 's/ Z$/ /' temp.txt > commit_template.txt
$ git config commit.template commit_template.txt
$ cat .git/hooks/commit-msg
#!/bin/sh
git interpret-trailers --trim-empty --trailer "git-version: \$(git describe)" "\$1" > "\$1.new"
mv "\$1.new" "\$1"
$ chmod +x .git/hooks/commit-msg
SEE ALSO
git-commit(1), git-format-patch(1), git-config(1)
GIT
Part of the git(1) suite
Git 2.41.0 2023-06-01 GIT-INTERPRET-TRAILERS(1)