DragonFly On-Line Manual Pages
IOSTAT(8) DragonFly System Manager's Manual IOSTAT(8)
NAME
iostat - report I/O statistics
SYNOPSIS
iostat [-CdhKIoT] [-c count] [-n devs] [-t type,if,pass] [-w wait]
[drives]
DESCRIPTION
Iostat displays kernel I/O statistics on terminal, device and cpu
operations.
The options are as follows:
-c Repeat the display count times. If no wait interval is specified,
the default is 1 second.
-C Display CPU statistics. This is on by default, unless -d is
specified.
-d Display only device statistics. If this flag is turned on, only
device statistics will be displayed, unless -C or -T is also
specified to enable the display of CPU or TTY statistics.
-D Display more details. If this flag is turned on, details on read
and write statistics will be displayed as MBw/s (Megabyte written
per second), MBr/s (Megabyte read per second), rtps (read
transactions per second) and wtps (write transactions per second).
-h Put iostat in `top' mode. In this mode, iostat will show devices
in order from highest to lowest bytes per measurement cycle.
-I Display total statistics for a given time period, rather than
average statistics for each second during that time period.
-K In the blocks transferred display (-o), display block count in
kilobytes rather then the device native block size.
-n Display up to devs number of devices. iostat will display fewer
devices if there aren't devs devices present.
-o Display old-style iostat device statistics. Sectors per second,
transfers per second, and milliseconds per seek are displayed. If
-I is specified, total blocks/sectors, total transfers, and
milliseconds per seek are displayed.
-t Specify which types of devices to display. There are three
different categories of devices:
device type:
da Direct Access devices
sa Sequential Access devices
printer Printers
proc Processor devices
worm Write Once Read Multiple devices
cd CD devices
scanner Scanner devices
optical Optical Memory devices
changer Medium Changer devices
comm Communication devices
array Storage Array devices
enclosure Enclosure Services devices
floppy Floppy devices
interface:
IDE Integrated Drive Electronics devices
SCSI Small Computer System Interface devices
other Any other device interface
passthrough:
pass Passthrough devices
The user must specify at least one device type, and may specify at
most one device type from each category. Multiple device types in
a single device type statement must be separated by commas.
Any number of -t arguments may be specified on the command line.
All -t arguments are ORed together to form a matching expression
against which all devices in the system are compared. Any device
that fully matches any -t argument will be included in the iostat
output, up to the number of devices that can be displayed in
available columns (80 minimum), or the maximum number of devices
specified by the user.
-T Display TTY statistics. This is on by default, unless -d is
specified.
-w Pause wait seconds between each display. If no repeat count is
specified, the default is infinity.
Iostat displays its information in the following format:
tty
tin characters read from terminals
tout characters written to terminals
devices
Device operations. The header of the field is the device name and
unit number. iostat will display as many devices as will fit in
available columns (80 minimum), or the maximum number of devices in
the system, whichever is smaller. If -n is specified on the
command line, iostat will display the smaller of the requested
number of devices, and the maximum number of devices in the system.
To force iostat to display specific drives, their names may be
supplied on the command line. iostat will not display more devices
than will fit in available columns (80 columns minimum), unless the
-n argument is given on the command line to specify a maximum
number of devices to display. Fewer devices may be displayed.
The standard iostat device display shows the following statistics:
KB/t kilobytes per transfer
tps transfers per second
MB/s megabytes per second
The standard iostat device display, with the -I flag specified,
shows the following statistics:
KB/t kilobytes per transfer
xfrs total number of transfers
MB total number of megabytes transferred
The old-style iostat display (using -o) shows the following
statistics:
sps sectors transferred per second
tps transfers per second
msps average milliseconds per transaction
The old-style iostat display, with the -I flag specified, shows the
following statistics:
blk total blocks/sectors transferred
xfr total transfers
msps average milliseconds per transaction
cpu
us % of cpu time in user mode
ni % of cpu time in user mode running niced processes
sy % of cpu time in system mode
in % of cpu time in interrupt mode
id % of cpu time in idle mode
EXAMPLES
iostat -w 1 da0 da1 cd0
Display statistics for the first two Direct Access devices and the first
CDROM device every second ad infinitum.
iostat -c 2
Display the statistics for the first four devices in the system twice,
with a one second display interval.
iostat -t da -t cd -w 1
Display statistics for all CDROM and Direct Access devices every second
ad infinitum.
iostat -t da,scsi,pass -t cd,scsi,pass
Display statistics once for all SCSI passthrough devices that provide
access to either Direct Access or CDROM devices.
iostat -h -n 8 -w 1
Display up to 8 devices with the most I/O every second ad infinitum.
iostat -dh -t da -w 1
Omit the TTY and CPU displays, show devices in order of performance and
show only Direct Access devices every second ad infinitum.
iostat -Iw 3
Display total statistics every three seconds ad infinitum.
iostat -odICTw 2 -c 9
Display total statistics using the old-style output format 9 times, with
a two second interval between each measurement/display. The -d flag
generally disables the TTY and CPU displays, but since the -T and -C
flags are given, the TTY and CPU displays will be displayed.
SEE ALSO
fstat(1), netstat(1), nfsstat(1), ps(1), systat(1), pstat(8), vmstat(8)
The sections starting with ``Interpreting system activity'' in Installing
and Operating 4.3BSD.
HISTORY
This version of iostat first appeared in FreeBSD 3.0.
AUTHORS
Kenneth Merry <ken@FreeBSD.org>
DragonFly 5.5-DEVELOPMENT December 22, 1997 DragonFly 5.5-DEVELOPMENT