DragonFly On-Line Manual Pages

Search: Section:  

ISPFW(4)              DragonFly Kernel Interfaces Manual              ISPFW(4)


NAME

     ispfw - Firmware Module for Qlogic based SCSI and FibreChannel SCSI Host
     Adapters


SYNOPSIS

     To compile this driver into the kernel, place the following line in your
     kernel configuration file:

           device ispfw

     This will compile firmware images for all isp(4) devices into the kernel.

     Alternatively, to load the driver as a module at boot time, place the
     following lines in loader.conf(5):

           isp_1040_load="YES"
           isp_1040_it_load="YES"
           isp_1080_load="YES"
           isp_1080_it_load="YES"
           isp_12160_load="YES"
           isp_12160_it_load="YES"
           isp_2100_load="YES"
           isp_2200_load="YES"
           isp_2300_load="YES"
           isp_2322_load="YES"
           isp_2400_load="YES"
           isp_2400_multi_load="YES"
           isp_2500_load="YES"
           isp_2500_multi_load="YES"


DESCRIPTION

     This trivial driver provides access to firmware sets for the Qlogic based
     SCSI and FibreChannel SCSI Host Adapters.  It may either be statically
     linked into the kernel, or loaded as a module.  In either case, the
     isp(4) driver will notice that firmware is available to be downloaded
     onto Qlogic cards (to replace the usually out of date firmware on the
     cards).  This will kick the f/w into getting unstuck.


SEE ALSO

     isp(4)


AUTHORS

     This driver was written by Matthew Jacob.

DragonFly 6.3-DEVELOPMENT        June 28, 2017       DragonFly 6.3-DEVELOPMENT

Search: Section: