DragonFly On-Line Manual Pages

Search: Section:  


PCRE2(3)              DragonFly Library Functions Manual              PCRE2(3)

NAME

PCRE2 - Perl-compatible regular expressions (revised API)

INTRODUCTION

PCRE2 is the name used for a revised API for the PCRE library, which is a set of functions, written in C, that implement regular expression pattern matching using the same syntax and semantics as Perl, with just a few differences. After nearly two decades, the limitations of the original API were making development increasingly difficult. The new API is more extensible, and it was simplified by abolishing the separate "study" optimizing function; in PCRE2, patterns are automatically optimized where possible. Since forking from PCRE1, the code has been extensively refactored and new features introduced. As well as Perl-style regular expression patterns, some features that appeared in Python and the original PCRE before they appeared in Perl are available using the Python syntax. There is also some support for one or two .NET and Oniguruma syntax items, and there are options for requesting some minor changes that give better ECMAScript (aka JavaScript) compatibility. The source code for PCRE2 can be compiled to support 8-bit, 16-bit, or 32-bit code units, which means that up to three separate libraries may be installed. The original work to extend PCRE to 16-bit and 32-bit code units was done by Zoltan Herczeg and Christian Persch, respectively. In all three cases, strings can be interpreted either as one character per code unit, or as UTF-encoded Unicode, with support for Unicode general category properties. Unicode support is optional at build time (but is the default). However, processing strings as UTF code units must be enabled explicitly at run time. The version of Unicode in use can be discovered by running pcre2test -C The three libraries contain identical sets of functions, with names ending in _8, _16, or _32, respectively (for example, pcre2_compile_8()). However, by defining PCRE2_CODE_UNIT_WIDTH to be 8, 16, or 32, a program that uses just one code unit width can be written using generic names such as pcre2_compile(), and the documentation is written assuming that this is the case. In addition to the Perl-compatible matching function, PCRE2 contains an alternative function that matches the same compiled patterns in a different way. In certain circumstances, the alternative function has some advantages. For a discussion of the two matching algorithms, see the pcre2matching page. Details of exactly which Perl regular expression features are and are not supported by PCRE2 are given in separate documents. See the pcre2pattern and pcre2compat pages. There is a syntax summary in the pcre2syntax page. Some features of PCRE2 can be included, excluded, or changed when the library is built. The pcre2_config() function makes it possible for a client to discover which features are available. The features themselves are described in the pcre2build page. Documentation about building PCRE2 for various operating systems can be found in the README and NON-AUTOTOOLS_BUILD files in the source distribution. The libraries contains a number of undocumented internal functions and data tables that are used by more than one of the exported external functions, but which are not intended for use by external callers. Their names all begin with "_pcre2", which hopefully will not provoke any name clashes. In some environments, it is possible to control which external symbols are exported when a shared library is built, and in these cases the undocumented symbols are not exported.

SECURITY CONSIDERATIONS

If you are using PCRE2 in a non-UTF application that permits users to supply arbitrary patterns for compilation, you should be aware of a feature that allows users to turn on UTF support from within a pattern. For example, an 8-bit pattern that begins with "(*UTF)" turns on UTF-8 mode, which interprets patterns and subjects as strings of UTF-8 code units instead of individual 8-bit characters. This causes both the pattern and any data against which it is matched to be checked for UTF-8 validity. If the data string is very long, such a check might use sufficiently many resources as to cause your application to lose performance. One way of guarding against this possibility is to use the pcre2_pattern_info() function to check the compiled pattern's options for PCRE2_UTF. Alternatively, you can set the PCRE2_NEVER_UTF option when calling pcre2_compile(). This causes a compile time error if the pattern contains a UTF-setting sequence. The use of Unicode properties for character types such as \d can also be enabled from within the pattern, by specifying "(*UCP)". This feature can be disallowed by setting the PCRE2_NEVER_UCP option. If your application is one that supports UTF, be aware that validity checking can take time. If the same data string is to be matched many times, you can use the PCRE2_NO_UTF_CHECK option for the second and subsequent matches to avoid running redundant checks. The use of the \C escape sequence in a UTF-8 or UTF-16 pattern can lead to problems, because it may leave the current matching point in the middle of a multi-code-unit character. The PCRE2_NEVER_BACKSLASH_C option can be used by an application to lock out the use of \C, causing a compile-time error if it is encountered. It is also possible to build PCRE2 with the use of \C permanently disabled. Another way that performance can be hit is by running a pattern that has a very large search tree against a string that will never match. Nested unlimited repeats in a pattern are a common example. PCRE2 provides some protection against this: see the pcre2_set_match_limit() function in the pcre2api page. There is a similar function called pcre2_set_depth_limit() that can be used to restrict the amount of memory that is used.

USER DOCUMENTATION

The user documentation for PCRE2 comprises a number of different sections. In the "man" format, each of these is a separate "man page". In the HTML format, each is a separate page, linked from the index page. In the plain text format, the descriptions of the pcre2grep and pcre2test programs are in files called pcre2grep.txt and pcre2test.txt, respectively. The remaining sections, except for the pcre2demo section (which is a program listing), and the short pages for individual functions, are concatenated in pcre2.txt, for ease of searching. The sections are as follows: pcre2 this document pcre2-config show PCRE2 installation configuration information pcre2api details of PCRE2's native C API pcre2build building PCRE2 pcre2callout details of the pattern callout feature pcre2compat discussion of Perl compatibility pcre2convert details of pattern conversion functions pcre2demo a demonstration C program that uses PCRE2 pcre2grep description of the pcre2grep command (8-bit only) pcre2jit discussion of just-in-time optimization support pcre2limits details of size and other limits pcre2matching discussion of the two matching algorithms pcre2partial details of the partial matching facility pcre2pattern syntax and semantics of supported regular expression patterns pcre2perform discussion of performance issues pcre2posix the POSIX-compatible C API for the 8-bit library pcre2sample discussion of the pcre2demo program pcre2serialize details of pattern serialization pcre2syntax quick syntax reference pcre2test description of the pcre2test command pcre2unicode discussion of Unicode and UTF support In the "man" and HTML formats, there is also a short page for each C library function, listing its arguments and results.

AUTHOR

Philip Hazel University Computing Service Cambridge, England. Putting an actual email address here is a spam magnet. If you want to email me, use my two initials, followed by the two digits 10, at the domain cam.ac.uk.

REVISION

Last updated: 17 September 2018 Copyright (c) 1997-2018 University of Cambridge. PCRE2 10.33 17 September 2018 PCRE2(3) PCRE2_DFA_MATCH(3) DragonFly Library Functions Manual PCRE2_DFA_MATCH(3)

NAME

PCRE2 - Perl-compatible regular expressions (revised API)

SYNOPSIS

#include <pcre2.h> int pcre2_dfa_match(const pcre2_code *code, PCRE2_SPTR subject, PCRE2_SIZE length, PCRE2_SIZE startoffset, uint32_t options, pcre2_match_data *match_data, pcre2_match_context *mcontext, int *workspace, PCRE2_SIZE wscount);

DESCRIPTION

This function matches a compiled regular expression against a given subject string, using an alternative matching algorithm that scans the subject string just once (except when processing lookaround assertions). This function is not Perl-compatible (the Perl-compatible matching function is pcre2_match()). The arguments for this function are: code Points to the compiled pattern subject Points to the subject string length Length of the subject string startoffset Offset in the subject at which to start matching options Option bits match_data Points to a match data block, for results mcontext Points to a match context, or is NULL workspace Points to a vector of ints used as working space wscount Number of elements in the vector For pcre2_dfa_match(), a match context is needed only if you want to set up a callout function or specify the heap limit or the match or the recursion depth limits. The length and startoffset values are code units, not characters. The options are: PCRE2_ANCHORED Match only at the first position PCRE2_COPY_MATCHED_SUBJECT On success, make a private subject copy PCRE2_ENDANCHORED Pattern can match only at end of subject PCRE2_NOTBOL Subject is not the beginning of a line PCRE2_NOTEOL Subject is not the end of a line PCRE2_NOTEMPTY An empty string is not a valid match PCRE2_NOTEMPTY_ATSTART An empty string at the start of the subject is not a valid match PCRE2_NO_UTF_CHECK Do not check the subject for UTF validity (only relevant if PCRE2_UTF was set at compile time) PCRE2_PARTIAL_HARD Return PCRE2_ERROR_PARTIAL for a partial match even if there is a full match PCRE2_PARTIAL_SOFT Return PCRE2_ERROR_PARTIAL for a partial match if no full matches are found PCRE2_DFA_RESTART Restart after a partial match PCRE2_DFA_SHORTEST Return only the shortest match There are restrictions on what may appear in a pattern when using this matching function. Details are given in the pcre2matching documentation. For details of partial matching, see the pcre2partial page. There is a complete description of the PCRE2 native API in the pcre2api page and a description of the POSIX API in the pcre2posix page. PCRE2 10.33 16 October 2018 PCRE2_DFA_MATCH(3)

Search: Section: