DragonFly On-Line Manual Pages
PERLDIAG(1) Perl Programmers Reference Guide PERLDIAG(1)
NAME
perldiag - various Perl diagnostics
DESCRIPTION
These messages are classified as follows (listed in increasing order of
desperation):
(W) A warning (optional).
(D) A deprecation (enabled by default).
(S) A severe warning (enabled by default).
(F) A fatal error (trappable).
(P) An internal error you should never see (trappable).
(X) A very fatal error (nontrappable).
(A) An alien error message (not generated by Perl).
The majority of messages from the first three classifications above (W,
D & S) can be controlled using the "warnings" pragma.
If a message can be controlled by the "warnings" pragma, its warning
category is included with the classification letter in the description
below. E.g. "(W closed)" means a warning in the "closed" category.
Optional warnings are enabled by using the "warnings" pragma or the -w
and -W switches. Warnings may be captured by setting $SIG{__WARN__} to
a reference to a routine that will be called on each warning instead of
printing it. See perlvar.
Severe warnings are always enabled, unless they are explicitly disabled
with the "warnings" pragma or the -X switch.
Trappable errors may be trapped using the eval operator. See "eval" in
perlfunc. In almost all cases, warnings may be selectively disabled or
promoted to fatal errors using the "warnings" pragma. See warnings.
The messages are in alphabetical order, without regard to upper or
lower-case. Some of these messages are generic. Spots that vary are
denoted with a %s or other printf-style escape. These escapes are
ignored by the alphabetical order, as are all characters other than
letters. To look up your message, just ignore anything that is not a
letter.
accept() on closed socket %s
(W closed) You tried to do an accept on a closed socket. Did you
forget to check the return value of your socket() call? See
"accept" in perlfunc.
Allocation too large: %x
(X) You can't allocate more than 64K on an MS-DOS machine.
'%c' allowed only after types %s in %s
(F) The modifiers '!', '<' and '>' are allowed in pack() or
unpack() only after certain types. See "pack" in perlfunc.
Ambiguous call resolved as CORE::%s(), qualify as such or use &
(W ambiguous) A subroutine you have declared has the same name as a
Perl keyword, and you have used the name without qualification for
calling one or the other. Perl decided to call the builtin because
the subroutine is not imported.
To force interpretation as a subroutine call, either put an
ampersand before the subroutine name, or qualify the name with its
package. Alternatively, you can import the subroutine (or pretend
that it's imported with the "use subs" pragma).
To silently interpret it as the Perl operator, use the "CORE::"
prefix on the operator (e.g. "CORE::log($x)") or declare the
subroutine to be an object method (see "Subroutine Attributes" in
perlsub or attributes).
Ambiguous range in transliteration operator
(F) You wrote something like "tr/a-z-0//" which doesn't mean
anything at all. To include a "-" character in a transliteration,
put it either first or last. (In the past, "tr/a-z-0//" was
synonymous with "tr/a-y//", which was probably not what you would
have expected.)
Ambiguous use of %s resolved as %s
(S ambiguous) You said something that may not be interpreted the
way you thought. Normally it's pretty easy to disambiguate it by
supplying a missing quote, operator, parenthesis pair or
declaration.
Ambiguous use of -%s resolved as -&%s()
(S ambiguous) You wrote something like "-foo", which might be the
string "-foo", or a call to the function "foo", negated. If you
meant the string, just write "-foo". If you meant the function
call, write "-foo()".
Ambiguous use of %c resolved as operator %c
(S ambiguous) "%", "&", and "*" are both infix operators (modulus,
bitwise and, and multiplication) and initial special characters
(denoting hashes, subroutines and typeglobs), and you said
something like "*foo * foo" that might be interpreted as either of
them. We assumed you meant the infix operator, but please try to
make it more clear -- in the example given, you might write "*foo *
foo()" if you really meant to multiply a glob by the result of
calling a function.
Ambiguous use of %c{%s} resolved to %c%s
(W ambiguous) You wrote something like "@{foo}", which might be
asking for the variable @foo, or it might be calling a function
named foo, and dereferencing it as an array reference. If you
wanted the variable, you can just write @foo. If you wanted to
call the function, write "@{foo()}" ... or you could just not have
a variable and a function with the same name, and save yourself a
lot of trouble.
Ambiguous use of %c{%s[...]} resolved to %c%s[...]
Ambiguous use of %c{%s{...}} resolved to %c%s{...}
(W ambiguous) You wrote something like "${foo[2]}" (where foo
represents the name of a Perl keyword), which might be looking for
element number 2 of the array named @foo, in which case please
write $foo[2], or you might have meant to pass an anonymous
arrayref to the function named foo, and then do a scalar deref on
the value it returns. If you meant that, write "${foo([2])}".
In regular expressions, the "${foo[2]}" syntax is sometimes
necessary to disambiguate between array subscripts and character
classes. "/$length[2345]/", for instance, will be interpreted as
$length followed by the character class "[2345]". If an array
subscript is what you want, you can avoid the warning by changing
"/${length[2345]}/" to the unsightly "/${\$length[2345]}/", by
renaming your array to something that does not coincide with a
built-in keyword, or by simply turning off warnings with "no
warnings 'ambiguous';".
'|' and '<' may not both be specified on command line
(F) An error peculiar to VMS. Perl does its own command line
redirection, and found that STDIN was a pipe, and that you also
tried to redirect STDIN using '<'. Only one STDIN stream to a
customer, please.
'|' and '>' may not both be specified on command line
(F) An error peculiar to VMS. Perl does its own command line
redirection, and thinks you tried to redirect stdout both to a file
and into a pipe to another command. You need to choose one or the
other, though nothing's stopping you from piping into a program or
Perl script which 'splits' output into two streams, such as
open(OUT,">$ARGV[0]") or die "Can't write to $ARGV[0]: $!";
while (<STDIN>) {
print;
print OUT;
}
close OUT;
Applying %s to %s will act on scalar(%s)
(W misc) The pattern match ("//"), substitution ("s///"), and
transliteration ("tr///") operators work on scalar values. If you
apply one of them to an array or a hash, it will convert the array
or hash to a scalar value (the length of an array, or the
population info of a hash) and then work on that scalar value.
This is probably not what you meant to do. See "grep" in perlfunc
and "map" in perlfunc for alternatives.
Arg too short for msgsnd
(F) msgsnd() requires a string at least as long as sizeof(long).
Argument "%s" isn't numeric%s
(W numeric) The indicated string was fed as an argument to an
operator that expected a numeric value instead. If you're
fortunate the message will identify which operator was so
unfortunate.
Argument list not closed for PerlIO layer "%s"
(W layer) When pushing a layer with arguments onto the Perl I/O
system you forgot the ) that closes the argument list. (Layers
take care of transforming data between external and internal
representations.) Perl stopped parsing the layer list at this
point and did not attempt to push this layer. If your program
didn't explicitly request the failing operation, it may be the
result of the value of the environment variable PERLIO.
Array @%s missing the @ in argument %d of %s()
(D deprecated) Really old Perl let you omit the @ on array names in
some spots. This is now heavily deprecated.
A sequence of multiple spaces in a charnames alias definition is
deprecated
(D deprecated) You defined a character name which had multiple
space characters in a row. Change them to single spaces. Usually
these names are defined in the ":alias" import argument to "use
charnames", but they could be defined by a translator installed
into $^H{charnames}. See "CUSTOM ALIASES" in charnames.
assertion botched: %s
(X) The malloc package that comes with Perl had an internal
failure.
Assertion %s failed: file "%s", line %d
(X) A general assertion failed. The file in question must be
examined.
Assigning non-zero to $[ is no longer possible
(F) When the "array_base" feature is disabled (e.g., under "use
v5.16;") the special variable $[, which is deprecated, is now a
fixed zero value.
Assignment to both a list and a scalar
(F) If you assign to a conditional operator, the 2nd and 3rd
arguments must either both be scalars or both be lists. Otherwise
Perl won't know which context to supply to the right side.
Attempt to access disallowed key '%s' in a restricted hash
(F) The failing code has attempted to get or set a key which is not
in the current set of allowed keys of a restricted hash.
Attempt to bless into a freed package
(F) You wrote "bless $foo" with one argument after somehow causing
the current package to be freed. Perl cannot figure out what to
do, so it throws up in hands in despair.
Attempt to bless into a reference
(F) The CLASSNAME argument to the bless() operator is expected to
be the name of the package to bless the resulting object into.
You've supplied instead a reference to something: perhaps you wrote
bless $self, $proto;
when you intended
bless $self, ref($proto) || $proto;
If you actually want to bless into the stringified version of the
reference supplied, you need to stringify it yourself, for example
by:
bless $self, "$proto";
Attempt to clear deleted array
(S debugging) An array was assigned to when it was being freed.
Freed values are not supposed to be visible to Perl code. This can
also happen if XS code calls "av_clear" from a custom magic
callback on the array.
Attempt to delete disallowed key '%s' from a restricted hash
(F) The failing code attempted to delete from a restricted hash a
key which is not in its key set.
Attempt to delete readonly key '%s' from a restricted hash
(F) The failing code attempted to delete a key whose value has been
declared readonly from a restricted hash.
Attempt to free non-arena SV: 0x%x
(S internal) All SV objects are supposed to be allocated from
arenas that will be garbage collected on exit. An SV was
discovered to be outside any of those arenas.
Attempt to free nonexistent shared string '%s'%s
(S internal) Perl maintains a reference-counted internal table of
strings to optimize the storage and access of hash keys and other
strings. This indicates someone tried to decrement the reference
count of a string that can no longer be found in the table.
Attempt to free temp prematurely: SV 0x%x
(S debugging) Mortalized values are supposed to be freed by the
free_tmps() routine. This indicates that something else is freeing
the SV before the free_tmps() routine gets a chance, which means
that the free_tmps() routine will be freeing an unreferenced scalar
when it does try to free it.
Attempt to free unreferenced glob pointers
(S internal) The reference counts got screwed up on symbol aliases.
Attempt to free unreferenced scalar: SV 0x%x
(S internal) Perl went to decrement the reference count of a scalar
to see if it would go to 0, and discovered that it had already gone
to 0 earlier, and should have been freed, and in fact, probably was
freed. This could indicate that SvREFCNT_dec() was called too many
times, or that SvREFCNT_inc() was called too few times, or that the
SV was mortalized when it shouldn't have been, or that memory has
been corrupted.
Attempt to pack pointer to temporary value
(W pack) You tried to pass a temporary value (like the result of a
function, or a computed expression) to the "p" pack() template.
This means the result contains a pointer to a location that could
become invalid anytime, even before the end of the current
statement. Use literals or global values as arguments to the "p"
pack() template to avoid this warning.
Attempt to reload %s aborted.
(F) You tried to load a file with "use" or "require" that failed to
compile once already. Perl will not try to compile this file again
unless you delete its entry from %INC. See "require" in perlfunc
and "%INC" in perlvar.
Attempt to set length of freed array
(W misc) You tried to set the length of an array which has been
freed. You can do this by storing a reference to the scalar
representing the last index of an array and later assigning through
that reference. For example
$r = do {my @a; \$#a};
$$r = 503
Attempt to use reference as lvalue in substr
(W substr) You supplied a reference as the first argument to
substr() used as an lvalue, which is pretty strange. Perhaps you
forgot to dereference it first. See "substr" in perlfunc.
Attribute "locked" is deprecated
(D deprecated) You have used the attributes pragma to modify the
"locked" attribute on a code reference. The :locked attribute is
obsolete, has had no effect since 5005 threads were removed, and
will be removed in a future release of Perl 5.
Attribute prototype(%s) discards earlier prototype attribute in same
sub
(W misc) A sub was declared as sub foo : prototype(A) :
prototype(B) {}, for example. Since each sub can only have one
prototype, the earlier declaration(s) are discarded while the last
one is applied.
Attribute "unique" is deprecated
(D deprecated) You have used the attributes pragma to modify the
"unique" attribute on an array, hash or scalar reference. The
:unique attribute has had no effect since Perl 5.8.8, and will be
removed in a future release of Perl 5.
av_reify called on tied array
(S debugging) This indicates that something went wrong and Perl got
very confused about @_ or @DB::args being tied.
Bad arg length for %s, is %u, should be %d
(F) You passed a buffer of the wrong size to one of msgctl(),
semctl() or shmctl(). In C parlance, the correct sizes are,
respectively, sizeof(struct msqid_ds *), sizeof(struct semid_ds *),
and sizeof(struct shmid_ds *).
Bad evalled substitution pattern
(F) You've used the "/e" switch to evaluate the replacement for a
substitution, but perl found a syntax error in the code to
evaluate, most likely an unexpected right brace '}'.
Bad filehandle: %s
(F) A symbol was passed to something wanting a filehandle, but the
symbol has no filehandle associated with it. Perhaps you didn't do
an open(), or did it in another package.
Bad free() ignored
(S malloc) An internal routine called free() on something that had
never been malloc()ed in the first place. Mandatory, but can be
disabled by setting environment variable "PERL_BADFREE" to 0.
This message can be seen quite often with DB_File on systems with
"hard" dynamic linking, like "AIX" and "OS/2". It is a bug of
"Berkeley DB" which is left unnoticed if "DB" uses forgiving system
malloc().
Bad hash
(P) One of the internal hash routines was passed a null HV pointer.
Badly placed ()'s
(A) You've accidentally run your script through csh instead of
Perl. Check the #! line, or manually feed your script into Perl
yourself.
Bad name after %s
(F) You started to name a symbol by using a package prefix, and
then didn't finish the symbol. In particular, you can't
interpolate outside of quotes, so
$var = 'myvar';
$sym = mypack::$var;
is not the same as
$var = 'myvar';
$sym = "mypack::$var";
Bad plugin affecting keyword '%s'
(F) An extension using the keyword plugin mechanism violated the
plugin API.
Bad realloc() ignored
(S malloc) An internal routine called realloc() on something that
had never been malloc()ed in the first place. Mandatory, but can
be disabled by setting the environment variable "PERL_BADFREE" to
1.
Bad symbol for array
(P) An internal request asked to add an array entry to something
that wasn't a symbol table entry.
Bad symbol for dirhandle
(P) An internal request asked to add a dirhandle entry to something
that wasn't a symbol table entry.
Bad symbol for filehandle
(P) An internal request asked to add a filehandle entry to
something that wasn't a symbol table entry.
Bad symbol for hash
(P) An internal request asked to add a hash entry to something that
wasn't a symbol table entry.
Bad symbol for scalar
(P) An internal request asked to add a scalar entry to something
that wasn't a symbol table entry.
Bareword found in conditional
(W bareword) The compiler found a bareword where it expected a
conditional, which often indicates that an || or && was parsed as
part of the last argument of the previous construct, for example:
open FOO || die;
It may also indicate a misspelled constant that has been
interpreted as a bareword:
use constant TYPO => 1;
if (TYOP) { print "foo" }
The "strict" pragma is useful in avoiding such errors.
Bareword "%s" not allowed while "strict subs" in use
(F) With "strict subs" in use, a bareword is only allowed as a
subroutine identifier, in curly brackets or to the left of the "=>"
symbol. Perhaps you need to predeclare a subroutine?
Bareword "%s" refers to nonexistent package
(W bareword) You used a qualified bareword of the form "Foo::", but
the compiler saw no other uses of that namespace before that point.
Perhaps you need to predeclare a package?
BEGIN failed--compilation aborted
(F) An untrapped exception was raised while executing a BEGIN
subroutine. Compilation stops immediately and the interpreter is
exited.
BEGIN not safe after errors--compilation aborted
(F) Perl found a "BEGIN {}" subroutine (or a "use" directive, which
implies a "BEGIN {}") after one or more compilation errors had
already occurred. Since the intended environment for the "BEGIN
{}" could not be guaranteed (due to the errors), and since
subsequent code likely depends on its correct operation, Perl just
gave up.
\%d better written as $%d
(W syntax) Outside of patterns, backreferences live on as
variables. The use of backslashes is grandfathered on the right-
hand side of a substitution, but stylistically it's better to use
the variable form because other Perl programmers will expect it,
and it works better if there are more than 9 backreferences.
Binary number > 0b11111111111111111111111111111111 non-portable
(W portable) The binary number you specified is larger than 2**32-1
(4294967295) and therefore non-portable between systems. See
perlport for more on portability concerns.
bind() on closed socket %s
(W closed) You tried to do a bind on a closed socket. Did you
forget to check the return value of your socket() call? See "bind"
in perlfunc.
binmode() on closed filehandle %s
(W unopened) You tried binmode() on a filehandle that was never
opened. Check your control flow and number of arguments.
"\b{" is deprecated; use "\b\{" or "\b[{]" instead in regex; marked by
<-- HERE in m/%s/
"\B{" is deprecated; use "\B\{" or "\B[{]" instead in regex; marked by
<-- HERE in m/%s/
(D deprecated) Use of an unescaped "{" immediately following a "\b"
or "\B" is now deprecated so as to reserve its use for Perl itself
in a future release. You can either precede the brace with a
backslash, or enclose it in square brackets; the latter is the way
to go if the pattern delimiters are "{}".
Bit vector size > 32 non-portable
(W portable) Using bit vector sizes larger than 32 is non-portable.
Bizarre copy of %s
(P) Perl detected an attempt to copy an internal value that is not
copiable.
Bizarre SvTYPE [%d]
(P) When starting a new thread or returning values from a thread,
Perl encountered an invalid data type.
Buffer overflow in prime_env_iter: %s
(W internal) A warning peculiar to VMS. While Perl was preparing
to iterate over %ENV, it encountered a logical name or symbol
definition which was too long, so it was truncated to the string
shown.
Callback called exit
(F) A subroutine invoked from an external package via call_sv()
exited by calling exit.
%s() called too early to check prototype
(W prototype) You've called a function that has a prototype before
the parser saw a definition or declaration for it, and Perl could
not check that the call conforms to the prototype. You need to
either add an early prototype declaration for the subroutine in
question, or move the subroutine definition ahead of the call to
get proper prototype checking. Alternatively, if you are certain
that you're calling the function correctly, you may put an
ampersand before the name to avoid the warning. See perlsub.
Calling POSIX::%s() is deprecated
(D deprecated) You called a function whose use is deprecated. See
the function's name in POSIX for details.
Cannot compress integer in pack
(F) An argument to pack("w",...) was too large to compress. The
BER compressed integer format can only be used with positive
integers, and you attempted to compress Infinity or a very large
number (> 1e308). See "pack" in perlfunc.
Cannot compress negative numbers in pack
(F) An argument to pack("w",...) was negative. The BER compressed
integer format can only be used with positive integers. See "pack"
in perlfunc.
Cannot convert a reference to %s to typeglob
(F) You manipulated Perl's symbol table directly, stored a
reference in it, then tried to access that symbol via conventional
Perl syntax. The access triggers Perl to autovivify that typeglob,
but it there is no legal conversion from that type of reference to
a typeglob.
Cannot copy to %s
(P) Perl detected an attempt to copy a value to an internal type
that cannot be directly assigned to.
Cannot find encoding "%s"
(S io) You tried to apply an encoding that did not exist to a
filehandle, either with open() or binmode().
Cannot set tied @DB::args
(F) "caller" tried to set @DB::args, but found it tied. Tying
@DB::args is not supported. (Before this error was added, it used
to crash.)
Cannot tie unreifiable array
(P) You somehow managed to call "tie" on an array that does not
keep a reference count on its arguments and cannot be made to do
so. Such arrays are not even supposed to be accessible to Perl
code, but are only used internally.
Can only compress unsigned integers in pack
(F) An argument to pack("w",...) was not an integer. The BER
compressed integer format can only be used with positive integers,
and you attempted to compress something else. See "pack" in
perlfunc.
Can't bless non-reference value
(F) Only hard references may be blessed. This is how Perl
"enforces" encapsulation of objects. See perlobj.
Can't "break" in a loop topicalizer
(F) You called "break", but you're in a "foreach" block rather than
a "given" block. You probably meant to use "next" or "last".
Can't "break" outside a given block
(F) You called "break", but you're not inside a "given" block.
Can't call method "%s" on an undefined value
(F) You used the syntax of a method call, but the slot filled by
the object reference or package name contains an undefined value.
Something like this will reproduce the error:
$BADREF = undef;
process $BADREF 1,2,3;
$BADREF->process(1,2,3);
Can't call method "%s" on unblessed reference
(F) A method call must know in what package it's supposed to run.
It ordinarily finds this out from the object reference you supply,
but you didn't supply an object reference in this case. A
reference isn't an object reference until it has been blessed. See
perlobj.
Can't call method "%s" without a package or object reference
(F) You used the syntax of a method call, but the slot filled by
the object reference or package name contains an expression that
returns a defined value which is neither an object reference nor a
package name. Something like this will reproduce the error:
$BADREF = 42;
process $BADREF 1,2,3;
$BADREF->process(1,2,3);
Can't call mro_isa_changed_in() on anonymous symbol table
(P) Perl got confused as to whether a hash was a plain hash or a
symbol table hash when trying to update @ISA caches.
Can't call mro_method_changed_in() on anonymous symbol table
(F) An XS module tried to call "mro_method_changed_in" on a hash
that was not attached to the symbol table.
Can't chdir to %s
(F) You called "perl -x/foo/bar", but /foo/bar is not a directory
that you can chdir to, possibly because it doesn't exist.
Can't check filesystem of script "%s" for nosuid
(P) For some reason you can't check the filesystem of the script
for nosuid.
Can't coerce %s to %s in %s
(F) Certain types of SVs, in particular real symbol table entries
(typeglobs), can't be forced to stop being what they are. So you
can't say things like:
*foo += 1;
You CAN say
$foo = *foo;
$foo += 1;
but then $foo no longer contains a glob.
Can't "continue" outside a when block
(F) You called "continue", but you're not inside a "when" or
"default" block.
Can't create pipe mailbox
(P) An error peculiar to VMS. The process is suffering from
exhausted quotas or other plumbing problems.
Can't declare %s in "%s"
(F) Only scalar, array, and hash variables may be declared as "my",
"our" or "state" variables. They must have ordinary identifiers as
names.
Can't "default" outside a topicalizer
(F) You have used a "default" block that is neither inside a
"foreach" loop nor a "given" block. (Note that this error is
issued on exit from the "default" block, so you won't get the error
if you use an explicit "continue".)
Can't do inplace edit: %s is not a regular file
(S inplace) You tried to use the -i switch on a special file, such
as a file in /dev, a FIFO or an uneditable directory. The file was
ignored.
Can't do inplace edit on %s: %s
(S inplace) The creation of the new file failed for the indicated
reason.
Can't do inplace edit without backup
(F) You're on a system such as MS-DOS that gets confused if you try
reading from a deleted (but still opened) file. You have to say
"-i.bak", or some such.
Can't do inplace edit: %s would not be unique
(S inplace) Your filesystem does not support filenames longer than
14 characters and Perl was unable to create a unique filename
during inplace editing with the -i switch. The file was ignored.
Can't do waitpid with flags
(F) This machine doesn't have either waitpid() or wait4(), so only
waitpid() without flags is emulated.
Can't emulate -%s on #! line
(F) The #! line specifies a switch that doesn't make sense at this
point. For example, it'd be kind of silly to put a -x on the #!
line.
Can't %s %s-endian %ss on this platform
(F) Your platform's byte-order is neither big-endian nor little-
endian, or it has a very strange pointer size. Packing and
unpacking big- or little-endian floating point values and pointers
may not be possible. See "pack" in perlfunc.
Can't exec "%s": %s
(W exec) A system(), exec(), or piped open call could not execute
the named program for the indicated reason. Typical reasons
include: the permissions were wrong on the file, the file wasn't
found in $ENV{PATH}, the executable in question was compiled for
another architecture, or the #! line in a script points to an
interpreter that can't be run for similar reasons. (Or maybe your
system doesn't support #! at all.)
Can't exec %s
(F) Perl was trying to execute the indicated program for you
because that's what the #! line said. If that's not what you
wanted, you may need to mention "perl" on the #! line somewhere.
Can't execute %s
(F) You used the -S switch, but the copies of the script to execute
found in the PATH did not have correct permissions.
Can't find an opnumber for "%s"
(F) A string of a form "CORE::word" was given to prototype(), but
there is no builtin with the name "word".
Can't find %s character property "%s"
(F) You used "\p{}" or "\P{}" but the character property by that
name could not be found. Maybe you misspelled the name of the
property? See "Properties accessible through \p{} and \P{}" in
perluniprops for a complete list of available official properties.
Can't find label %s
(F) You said to goto a label that isn't mentioned anywhere that
it's possible for us to go to. See "goto" in perlfunc.
Can't find %s on PATH
(F) You used the -S switch, but the script to execute could not be
found in the PATH.
Can't find %s on PATH, '.' not in PATH
(F) You used the -S switch, but the script to execute could not be
found in the PATH, or at least not with the correct permissions.
The script exists in the current directory, but PATH prohibits
running it.
Can't find string terminator %s anywhere before EOF
(F) Perl strings can stretch over multiple lines. This message
means that the closing delimiter was omitted. Because bracketed
quotes count nesting levels, the following is missing its final
parenthesis:
print q(The character '(' starts a side comment.);
If you're getting this error from a here-document, you may have
included unseen whitespace before or after your closing tag or
there may not be a linebreak after it. A good programmer's editor
will have a way to help you find these characters (or lack of
characters). See perlop for the full details on here-documents.
Can't find Unicode property definition "%s"
(F) You may have tried to use "\p" which means a Unicode property
(for example "\p{Lu}" matches all uppercase letters). If you did
mean to use a Unicode property, see "Properties accessible through
\p{} and \P{}" in perluniprops for a complete list of available
properties. If you didn't mean to use a Unicode property, escape
the "\p", either by "\\p" (just the "\p") or by "\Q\p" (the rest of
the string, or until "\E").
Can't fork: %s
(F) A fatal error occurred while trying to fork while opening a
pipeline.
Can't fork, trying again in 5 seconds
(W pipe) A fork in a piped open failed with EAGAIN and will be
retried after five seconds.
Can't get filespec - stale stat buffer?
(S) A warning peculiar to VMS. This arises because of the
difference between access checks under VMS and under the Unix model
Perl assumes. Under VMS, access checks are done by filename,
rather than by bits in the stat buffer, so that ACLs and other
protections can be taken into account. Unfortunately, Perl assumes
that the stat buffer contains all the necessary information, and
passes it, instead of the filespec, to the access-checking routine.
It will try to retrieve the filespec using the device name and FID
present in the stat buffer, but this works only if you haven't made
a subsequent call to the CRTL stat() routine, because the device
name is overwritten with each call. If this warning appears, the
name lookup failed, and the access-checking routine gave up and
returned FALSE, just to be conservative. (Note: The access-
checking routine knows about the Perl "stat" operator and file
tests, so you shouldn't ever see this warning in response to a Perl
command; it arises only if some internal code takes stat buffers
lightly.)
Can't get pipe mailbox device name
(P) An error peculiar to VMS. After creating a mailbox to act as a
pipe, Perl can't retrieve its name for later use.
Can't get SYSGEN parameter value for MAXBUF
(P) An error peculiar to VMS. Perl asked $GETSYI how big you want
your mailbox buffers to be, and didn't get an answer.
Can't "goto" into the middle of a foreach loop
(F) A "goto" statement was executed to jump into the middle of a
foreach loop. You can't get there from here. See "goto" in
perlfunc.
Can't "goto" out of a pseudo block
(F) A "goto" statement was executed to jump out of what might look
like a block, except that it isn't a proper block. This usually
occurs if you tried to jump out of a sort() block or subroutine,
which is a no-no. See "goto" in perlfunc.
Can't goto subroutine from an eval-%s
(F) The "goto subroutine" call can't be used to jump out of an eval
"string" or block.
Can't goto subroutine from a sort sub (or similar callback)
(F) The "goto subroutine" call can't be used to jump out of the
comparison sub for a sort(), or from a similar callback (such as
the reduce() function in List::Util).
Can't goto subroutine outside a subroutine
(F) The deeply magical "goto subroutine" call can only replace one
subroutine call for another. It can't manufacture one out of whole
cloth. In general you should be calling it out of only an AUTOLOAD
routine anyway. See "goto" in perlfunc.
Can't ignore signal CHLD, forcing to default
(W signal) Perl has detected that it is being run with the SIGCHLD
signal (sometimes known as SIGCLD) disabled. Since disabling this
signal will interfere with proper determination of exit status of
child processes, Perl has reset the signal to its default value.
This situation typically indicates that the parent program under
which Perl may be running (e.g. cron) is being very careless.
Can't kill a non-numeric process ID
(F) Process identifiers must be (signed) integers. It is a fatal
error to attempt to kill() an undefined, empty-string or otherwise
non-numeric process identifier.
Can't "last" outside a loop block
(F) A "last" statement was executed to break out of the current
block, except that there's this itty bitty problem called there
isn't a current block. Note that an "if" or "else" block doesn't
count as a "loopish" block, as doesn't a block given to sort(),
map() or grep(). You can usually double the curlies to get the
same effect though, because the inner curlies will be considered a
block that loops once. See "last" in perlfunc.
Can't linearize anonymous symbol table
(F) Perl tried to calculate the method resolution order (MRO) of a
package, but failed because the package stash has no name.
Can't load '%s' for module %s
(F) The module you tried to load failed to load a dynamic
extension. This may either mean that you upgraded your version of
perl to one that is incompatible with your old dynamic extensions
(which is known to happen between major versions of perl), or (more
likely) that your dynamic extension was built against an older
version of the library that is installed on your system. You may
need to rebuild your old dynamic extensions.
Can't localize lexical variable %s
(F) You used local on a variable name that was previously declared
as a lexical variable using "my" or "state". This is not allowed.
If you want to localize a package variable of the same name,
qualify it with the package name.
Can't localize through a reference
(F) You said something like "local $$ref", which Perl can't
currently handle, because when it goes to restore the old value of
whatever $ref pointed to after the scope of the local() is
finished, it can't be sure that $ref will still be a reference.
Can't locate %s
(F) You said to "do" (or "require", or "use") a file that couldn't
be found. Perl looks for the file in all the locations mentioned
in @INC, unless the file name included the full path to the file.
Perhaps you need to set the PERL5LIB or PERL5OPT environment
variable to say where the extra library is, or maybe the script
needs to add the library name to @INC. Or maybe you just
misspelled the name of the file. See "require" in perlfunc and
lib.
Can't locate auto/%s.al in @INC
(F) A function (or method) was called in a package which allows
autoload, but there is no function to autoload. Most probable
causes are a misprint in a function/method name or a failure to
"AutoSplit" the file, say, by doing "make install".
Can't locate loadable object for module %s in @INC
(F) The module you loaded is trying to load an external library,
like for example, foo.so or bar.dll, but the DynaLoader module was
unable to locate this library. See DynaLoader.
Can't locate object method "%s" via package "%s"
(F) You called a method correctly, and it correctly indicated a
package functioning as a class, but that package doesn't define
that particular method, nor does any of its base classes. See
perlobj.
Can't locate object method "%s" via package "%s" (perhaps you forgot to
load "%s"?)
(F) You called a method on a class that did not exist, and the
method could not be found in UNIVERSAL. This often means that a
method requires a package that has not been loaded.
Can't locate package %s for @%s::ISA
(W syntax) The @ISA array contained the name of another package
that doesn't seem to exist.
Can't locate PerlIO%s
(F) You tried to use in open() a PerlIO layer that does not exist,
e.g. open(FH, ">:nosuchlayer", "somefile").
Can't make list assignment to %ENV on this system
(F) List assignment to %ENV is not supported on some systems,
notably VMS.
Can't make loaded symbols global on this platform while loading %s
(S) A module passed the flag 0x01 to DynaLoader::dl_load_file() to
request that symbols from the stated file are made available
globally within the process, but that functionality is not
available on this platform. Whilst the module likely will still
work, this may prevent the perl interpreter from loading other XS-
based extensions which need to link directly to functions defined
in the C or XS code in the stated file.
Can't modify %s in %s
(F) You aren't allowed to assign to the item indicated, or
otherwise try to change it, such as with an auto-increment.
Can't modify nonexistent substring
(P) The internal routine that does assignment to a substr() was
handed a NULL.
Can't modify non-lvalue subroutine call
(F) Subroutines meant to be used in lvalue context should be
declared as such. See "Lvalue subroutines" in perlsub.
Can't msgrcv to read-only var
(F) The target of a msgrcv must be modifiable to be used as a
receive buffer.
Can't "next" outside a loop block
(F) A "next" statement was executed to reiterate the current block,
but there isn't a current block. Note that an "if" or "else" block
doesn't count as a "loopish" block, as doesn't a block given to
sort(), map() or grep(). You can usually double the curlies to get
the same effect though, because the inner curlies will be
considered a block that loops once. See "next" in perlfunc.
Can't open %s
(F) You tried to run a perl built with MAD support with the
PERL_XMLDUMP environment variable set, but the file named by that
variable could not be opened.
Can't open %s: %s
(S inplace) The implicit opening of a file through use of the "<>"
filehandle, either implicitly under the "-n" or "-p" command-line
switches, or explicitly, failed for the indicated reason. Usually
this is because you don't have read permission for a file which you
named on the command line.
(F) You tried to call perl with the -e switch, but /dev/null (or
your operating system's equivalent) could not be opened.
Can't open a reference
(W io) You tried to open a scalar reference for reading or writing,
using the 3-arg open() syntax:
open FH, '>', $ref;
but your version of perl is compiled without perlio, and this form
of open is not supported.
Can't open bidirectional pipe
(W pipe) You tried to say "open(CMD, "|cmd|")", which is not
supported. You can try any of several modules in the Perl library
to do this, such as IPC::Open2. Alternately, direct the pipe's
output to a file using ">", and then read it in under a different
file handle.
Can't open error file %s as stderr
(F) An error peculiar to VMS. Perl does its own command line
redirection, and couldn't open the file specified after '2>' or
'2>>' on the command line for writing.
Can't open input file %s as stdin
(F) An error peculiar to VMS. Perl does its own command line
redirection, and couldn't open the file specified after '<' on the
command line for reading.
Can't open output file %s as stdout
(F) An error peculiar to VMS. Perl does its own command line
redirection, and couldn't open the file specified after '>' or '>>'
on the command line for writing.
Can't open output pipe (name: %s)
(P) An error peculiar to VMS. Perl does its own command line
redirection, and couldn't open the pipe into which to send data
destined for stdout.
Can't open perl script "%s": %s
(F) The script you specified can't be opened for the indicated
reason.
If you're debugging a script that uses #!, and normally relies on
the shell's $PATH search, the -S option causes perl to do that
search, so you don't have to type the path or "`which
$scriptname`".
Can't read CRTL environ
(S) A warning peculiar to VMS. Perl tried to read an element of
%ENV from the CRTL's internal environment array and discovered the
array was missing. You need to figure out where your CRTL
misplaced its environ or define PERL_ENV_TABLES (see perlvms) so
that environ is not searched.
Can't "redo" outside a loop block
(F) A "redo" statement was executed to restart the current block,
but there isn't a current block. Note that an "if" or "else" block
doesn't count as a "loopish" block, as doesn't a block given to
sort(), map() or grep(). You can usually double the curlies to get
the same effect though, because the inner curlies will be
considered a block that loops once. See "redo" in perlfunc.
Can't remove %s: %s, skipping file
(S inplace) You requested an inplace edit without creating a backup
file. Perl was unable to remove the original file to replace it
with the modified file. The file was left unmodified.
Can't rename %s to %s: %s, skipping file
(S inplace) The rename done by the -i switch failed for some
reason, probably because you don't have write permission to the
directory.
Can't reopen input pipe (name: %s) in binary mode
(P) An error peculiar to VMS. Perl thought stdin was a pipe, and
tried to reopen it to accept binary data. Alas, it failed.
Can't reset %ENV on this system
(F) You called "reset('E')" or similar, which tried to reset all
variables in the current package beginning with "E". In the main
package, that includes %ENV. Resetting %ENV is not supported on
some systems, notably VMS.
Can't resolve method "%s" overloading "%s" in package "%s"
(F)(P) Error resolving overloading specified by a method name (as
opposed to a subroutine reference): no such method callable via the
package. If the method name is "???", this is an internal error.
Can't return %s from lvalue subroutine
(F) Perl detected an attempt to return illegal lvalues (such as
temporary or readonly values) from a subroutine used as an lvalue.
This is not allowed.
Can't return outside a subroutine
(F) The return statement was executed in mainline code, that is,
where there was no subroutine call to return out of. See perlsub.
Can't return %s to lvalue scalar context
(F) You tried to return a complete array or hash from an lvalue
subroutine, but you called the subroutine in a way that made Perl
think you meant to return only one value. You probably meant to
write parentheses around the call to the subroutine, which tell
Perl that the call should be in list context.
Can't stat script "%s"
(P) For some reason you can't fstat() the script even though you
have it open already. Bizarre.
Can't take log of %g
(F) For ordinary real numbers, you can't take the logarithm of a
negative number or zero. There's a Math::Complex package that
comes standard with Perl, though, if you really want to do that for
the negative numbers.
Can't take sqrt of %g
(F) For ordinary real numbers, you can't take the square root of a
negative number. There's a Math::Complex package that comes
standard with Perl, though, if you really want to do that.
Can't undef active subroutine
(F) You can't undefine a routine that's currently running. You
can, however, redefine it while it's running, and you can even
undef the redefined subroutine while the old routine is running.
Go figure.
Can't upgrade %s (%d) to %d
(P) The internal sv_upgrade routine adds "members" to an SV, making
it into a more specialized kind of SV. The top several SV types
are so specialized, however, that they cannot be interconverted.
This message indicates that such a conversion was attempted.
Can't use '%c' after -mname
(F) You tried to call perl with the -m switch, but you put
something other than "=" after the module name.
Can't use anonymous symbol table for method lookup
(F) The internal routine that does method lookup was handed a
symbol table that doesn't have a name. Symbol tables can become
anonymous for example by undefining stashes: "undef
%Some::Package::".
Can't use an undefined value as %s reference
(F) A value used as either a hard reference or a symbolic reference
must be a defined value. This helps to delurk some insidious
errors.
Can't use bareword ("%s") as %s ref while "strict refs" in use
(F) Only hard references are allowed by "strict refs". Symbolic
references are disallowed. See perlref.
Can't use %! because Errno.pm is not available
(F) The first time the "%!" hash is used, perl automatically loads
the Errno.pm module. The Errno module is expected to tie the %!
hash to provide symbolic names for $! errno values.
Can't use both '<' and '>' after type '%c' in %s
(F) A type cannot be forced to have both big-endian and little-
endian byte-order at the same time, so this combination of
modifiers is not allowed. See "pack" in perlfunc.
Can't use %s for loop variable
(F) Only a simple scalar variable may be used as a loop variable on
a foreach.
Can't use global %s in "%s"
(F) You tried to declare a magical variable as a lexical variable.
This is not allowed, because the magic can be tied to only one
location (namely the global variable) and it would be incredibly
confusing to have variables in your program that looked like
magical variables but weren't.
Can't use '%c' in a group with different byte-order in %s
(F) You attempted to force a different byte-order on a type that is
already inside a group with a byte-order modifier. For example you
cannot force little-endianness on a type that is inside a big-
endian group.
Can't use "my %s" in sort comparison
(F) The global variables $a and $b are reserved for sort
comparisons. You mentioned $a or $b in the same line as the <=> or
cmp operator, and the variable had earlier been declared as a
lexical variable. Either qualify the sort variable with the
package name, or rename the lexical variable.
Can't use %s ref as %s ref
(F) You've mixed up your reference types. You have to dereference
a reference of the type needed. You can use the ref() function to
test the type of the reference, if need be.
Can't use string ("%s") as %s ref while "strict refs" in use
Can't use string ("%s"...) as %s ref while "strict refs" in use
(F) You've told Perl to dereference a string, something which "use
strict" blocks to prevent it happening accidentally. See "Symbolic
references" in perlref. This can be triggered by an "@" or "$" in
a double-quoted string immediately before interpolating a variable,
for example in "user @$twitter_id", which says to treat the
contents of $twitter_id as an array reference; use a "\" to have a
literal "@" symbol followed by the contents of $twitter_id: "user
\@$twitter_id".
Can't use subscript on %s
(F) The compiler tried to interpret a bracketed expression as a
subscript. But to the left of the brackets was an expression that
didn't look like a hash or array reference, or anything else
subscriptable.
Can't use \%c to mean $%c in expression
(W syntax) In an ordinary expression, backslash is a unary operator
that creates a reference to its argument. The use of backslash to
indicate a backreference to a matched substring is valid only as
part of a regular expression pattern. Trying to do this in
ordinary Perl code produces a value that prints out looking like
SCALAR(0xdecaf). Use the $1 form instead.
Can't weaken a nonreference
(F) You attempted to weaken something that was not a reference.
Only references can be weakened.
Can't "when" outside a topicalizer
(F) You have used a when() block that is neither inside a "foreach"
loop nor a "given" block. (Note that this error is issued on exit
from the "when" block, so you won't get the error if the match
fails, or if you use an explicit "continue".)
Can't x= to read-only value
(F) You tried to repeat a constant value (often the undefined
value) with an assignment operator, which implies modifying the
value itself. Perhaps you need to copy the value to a temporary,
and repeat that.
Character following "\c" must be printable ASCII
(F)(D deprecated, syntax) In "\cX", X must be a printable (non-
control) ASCII character. This is fatal starting in v5.20 for non-
ASCII characters, and it is planned to make this fatal in all
instances in Perl v5.22. In the cases where it isn't fatal, the
character this evaluates to is derived by exclusive or'ing the code
point of this character with 0x40.
Note that ASCII characters that don't map to control characters are
discouraged here as well, and will generate the warning (when
enabled) ""\c%c" is more clearly written simply as "%s"".
Character in 'C' format wrapped in pack
(W pack) You said
pack("C", $x)
where $x is either less than 0 or more than 255; the "C" format is
only for encoding native operating system characters (ASCII,
EBCDIC, and so on) and not for Unicode characters, so Perl behaved
as if you meant
pack("C", $x & 255)
If you actually want to pack Unicode codepoints, use the "U" format
instead.
Character in 'c' format wrapped in pack
(W pack) You said
pack("c", $x)
where $x is either less than -128 or more than 127; the "c" format
is only for encoding native operating system characters (ASCII,
EBCDIC, and so on) and not for Unicode characters, so Perl behaved
as if you meant
pack("c", $x & 255);
If you actually want to pack Unicode codepoints, use the "U" format
instead.
Character in '%c' format wrapped in unpack
(W unpack) You tried something like
unpack("H", "\x{2a1}")
where the format expects to process a byte (a character with a
value below 256), but a higher value was provided instead. Perl
uses the value modulus 256 instead, as if you had provided:
unpack("H", "\x{a1}")
Character in 'W' format wrapped in pack
(W pack) You said
pack("U0W", $x)
where $x is either less than 0 or more than 255. However,
"U0"-mode expects all values to fall in the interval [0, 255], so
Perl behaved as if you meant:
pack("U0W", $x & 255)
Character(s) in '%c' format wrapped in pack
(W pack) You tried something like
pack("u", "\x{1f3}b")
where the format expects to process a sequence of bytes (character
with a value below 256), but some of the characters had a higher
value. Perl uses the character values modulus 256 instead, as if
you had provided:
pack("u", "\x{f3}b")
Character(s) in '%c' format wrapped in unpack
(W unpack) You tried something like
unpack("s", "\x{1f3}b")
where the format expects to process a sequence of bytes (character
with a value below 256), but some of the characters had a higher
value. Perl uses the character values modulus 256 instead, as if
you had provided:
unpack("s", "\x{f3}b")
"\c%c" is more clearly written simply as "%s"
(W syntax) The "\cX" construct is intended to be a way to specify
non-printable characters. You used it for a printable one, which
is better written as simply itself, perhaps preceded by a backslash
for non-word characters. Doing it the way you did is not portable
between ASCII and EBCDIC platforms.
Cloning substitution context is unimplemented
(F) Creating a new thread inside the "s///" operator is not
supported.
closedir() attempted on invalid dirhandle %s
(W io) The dirhandle you tried to close is either closed or not
really a dirhandle. Check your control flow.
close() on unopened filehandle %s
(W unopened) You tried to close a filehandle that was never opened.
Closure prototype called
(F) If a closure has attributes, the subroutine passed to an
attribute handler is the prototype that is cloned when a new
closure is created. This subroutine cannot be called.
Code missing after '/'
(F) You had a (sub-)template that ends with a '/'. There must be
another template code following the slash. See "pack" in perlfunc.
Code point 0x%X is not Unicode, may not be portable
(S non_unicode) You had a code point above the Unicode maximum of
U+10FFFF.
Perl allows strings to contain a superset of Unicode code points,
up to the limit of what is storable in an unsigned integer on your
system, but these may not be accepted by other languages/systems.
At one time, it was legal in some standards to have code points up
to 0x7FFF_FFFF, but not higher. Code points above 0xFFFF_FFFF
require larger than a 32 bit word.
%s: Command not found
(A) You've accidentally run your script through csh or another
shell instead of Perl. Check the #! line, or manually feed your
script into Perl yourself. The #! line at the top of your file
could look like
#!/usr/bin/perl -w
Compilation failed in require
(F) Perl could not compile a file specified in a "require"
statement. Perl uses this generic message when none of the errors
that it encountered were severe enough to halt compilation
immediately.
Complex regular subexpression recursion limit (%d) exceeded
(W regexp) The regular expression engine uses recursion in complex
situations where back-tracking is required. Recursion depth is
limited to 32766, or perhaps less in architectures where the stack
cannot grow arbitrarily. ("Simple" and "medium" situations are
handled without recursion and are not subject to a limit.) Try
shortening the string under examination; looping in Perl code (e.g.
with "while") rather than in the regular expression engine; or
rewriting the regular expression so that it is simpler or
backtracks less. (See perlfaq2 for information on Mastering
Regular Expressions.)
connect() on closed socket %s
(W closed) You tried to do a connect on a closed socket. Did you
forget to check the return value of your socket() call? See
"connect" in perlfunc.
Constant(%s): Call to &{$^H{%s}} did not return a defined value
(F) The subroutine registered to handle constant overloading (see
overload) or a custom charnames handler (see "CUSTOM TRANSLATORS"
in charnames) returned an undefined value.
Constant(%s): $^H{%s} is not defined
(F) The parser found inconsistencies while attempting to define an
overloaded constant. Perhaps you forgot to load the corresponding
overload pragma?
Constant is not %s reference
(F) A constant value (perhaps declared using the "use constant"
pragma) is being dereferenced, but it amounts to the wrong type of
reference. The message indicates the type of reference that was
expected. This usually indicates a syntax error in dereferencing
the constant value. See "Constant Functions" in perlsub and
constant.
Constant subroutine %s redefined
(W redefine)(S) You redefined a subroutine which had previously
been eligible for inlining. See "Constant Functions" in perlsub
for commentary and workarounds.
Constant subroutine %s undefined
(W misc) You undefined a subroutine which had previously been
eligible for inlining. See "Constant Functions" in perlsub for
commentary and workarounds.
Constant(%s) unknown
(F) The parser found inconsistencies either while attempting to
define an overloaded constant, or when trying to find the character
name specified in the "\N{...}" escape. Perhaps you forgot to load
the corresponding overload pragma?.
Copy method did not return a reference
(F) The method which overloads "=" is buggy. See "Copy
Constructor" in overload.
&CORE::%s cannot be called directly
(F) You tried to call a subroutine in the "CORE::" namespace with
&foo syntax or through a reference. Some subroutines in this
package cannot yet be called that way, but must be called as
barewords. Something like this will work:
BEGIN { *shove = \&CORE::push; }
shove @array, 1,2,3; # pushes on to @array
CORE::%s is not a keyword
(F) The CORE:: namespace is reserved for Perl keywords.
Corrupted regexp opcode %d > %d
(P) This is either an error in Perl, or, if you're using one, your
custom regular expression engine. If not the latter, report the
problem through the perlbug utility.
corrupted regexp pointers
(P) The regular expression engine got confused by what the regular
expression compiler gave it.
corrupted regexp program
(P) The regular expression engine got passed a regexp program
without a valid magic number.
Corrupt malloc ptr 0x%x at 0x%x
(P) The malloc package that comes with Perl had an internal
failure.
Count after length/code in unpack
(F) You had an unpack template indicating a counted-length string,
but you have also specified an explicit size for the string. See
"pack" in perlfunc.
Deep recursion on anonymous subroutine
Deep recursion on subroutine "%s"
(W recursion) This subroutine has called itself (directly or
indirectly) 100 times more than it has returned. This probably
indicates an infinite recursion, unless you're writing strange
benchmark programs, in which case it indicates something else.
This threshold can be changed from 100, by recompiling the perl
binary, setting the C pre-processor macro "PERL_SUB_DEPTH_WARN" to
the desired value.
defined(@array) is deprecated
(D deprecated) defined() is not usually useful on arrays because it
checks for an undefined scalar value. If you want to see if the
array is empty, just use "if (@array) { # not empty }" for example.
defined(%hash) is deprecated
(D deprecated) "defined()" is not usually right on hashes and has
been discouraged since 5.004.
Although "defined %hash" is false on a plain not-yet-used hash, it
becomes true in several non-obvious circumstances, including
iterators, weak references, stash names, even remaining true after
"undef %hash". These things make "defined %hash" fairly useless in
practice.
If a check for non-empty is what you wanted then just put it in
boolean context (see "Scalar values" in perldata):
if (%hash) {
# not empty
}
If you had "defined %Foo::Bar::QUUX" to check whether such a
package variable exists then that's never really been reliable, and
isn't a good way to enquire about the features of a package, or
whether it's loaded, etc.
(?(DEFINE)....) does not allow branches in regex; marked by <-- HERE in
m/%s/
(F) You used something like "(?(DEFINE)...|..)" which is illegal.
The most likely cause of this error is that you left out a
parenthesis inside of the "...." part.
The <-- HERE shows whereabouts in the regular expression the
problem was discovered.
%s defines neither package nor VERSION--version check failed
(F) You said something like "use Module 42" but in the Module file
there are neither package declarations nor a $VERSION.
delete argument is index/value array slice, use array slice
(F) You used index/value array slice syntax (%array[...]) as the
argument to "delete". You probably meant @array[...] with an @
symbol instead.
delete argument is key/value hash slice, use hash slice
(F) You used key/value hash slice syntax (%hash{...}) as the
argument to "delete". You probably meant @hash{...} with an @
symbol instead.
delete argument is not a HASH or ARRAY element or slice
(F) The argument to "delete" must be either a hash or array
element, such as:
$foo{$bar}
$ref->{"susie"}[12]
or a hash or array slice, such as:
@foo[$bar, $baz, $xyzzy]
@{$ref->[12]}{"susie", "queue"}
Delimiter for here document is too long
(F) In a here document construct like "<<FOO", the label "FOO" is
too long for Perl to handle. You have to be seriously twisted to
write code that triggers this error.
Deprecated use of my() in false conditional
(D deprecated) You used a declaration similar to "my $x if 0".
There has been a long-standing bug in Perl that causes a lexical
variable not to be cleared at scope exit when its declaration
includes a false conditional. Some people have exploited this bug
to achieve a kind of static variable. Since we intend to fix this
bug, we don't want people relying on this behavior. You can
achieve a similar static effect by declaring the variable in a
separate block outside the function, eg
sub f { my $x if 0; return $x++ }
becomes
{ my $x; sub f { return $x++ } }
Beginning with perl 5.10.0, you can also use "state" variables to
have lexicals that are initialized only once (see feature):
sub f { state $x; return $x++ }
DESTROY created new reference to dead object '%s'
(F) A DESTROY() method created a new reference to the object which
is just being DESTROYed. Perl is confused, and prefers to abort
rather than to create a dangling reference.
Did not produce a valid header
See Server error.
%s did not return a true value
(F) A required (or used) file must return a true value to indicate
that it compiled correctly and ran its initialization code
correctly. It's traditional to end such a file with a "1;", though
any true value would do. See "require" in perlfunc.
(Did you mean &%s instead?)
(W misc) You probably referred to an imported subroutine &FOO as
$FOO or some such.
(Did you mean "local" instead of "our"?)
(W misc) Remember that "our" does not localize the declared global
variable. You have declared it again in the same lexical scope,
which seems superfluous.
(Did you mean $ or @ instead of %?)
(W) You probably said %hash{$key} when you meant $hash{$key} or
@hash{@keys}. On the other hand, maybe you just meant %hash and
got carried away.
Died
(F) You passed die() an empty string (the equivalent of "die """)
or you called it with no args and $@ was empty.
Document contains no data
See Server error.
%s does not define %s::VERSION--version check failed
(F) You said something like "use Module 42" but the Module did not
define a $VERSION.
'/' does not take a repeat count
(F) You cannot put a repeat count of any kind right after the '/'
code. See "pack" in perlfunc.
Don't know how to get file name
(P) "PerlIO_getname", a perl internal I/O function specific to VMS,
was somehow called on another platform. This should not happen.
Don't know how to handle magic of type \%o
(P) The internal handling of magical variables has been cursed.
do_study: out of memory
(P) This should have been caught by safemalloc() instead.
(Do you need to predeclare %s?)
(S syntax) This is an educated guess made in conjunction with the
message "%s found where operator expected". It often means a
subroutine or module name is being referenced that hasn't been
declared yet. This may be because of ordering problems in your
file, or because of a missing "sub", "package", "require", or "use"
statement. If you're referencing something that isn't defined yet,
you don't actually have to define the subroutine or package before
the current location. You can use an empty "sub foo;" or "package
FOO;" to enter a "forward" declaration.
dump() better written as CORE::dump()
(W misc) You used the obsolescent "dump()" built-in function,
without fully qualifying it as "CORE::dump()". Maybe it's a typo.
See "dump" in perlfunc.
dump is not supported
(F) Your machine doesn't support dump/undump.
Duplicate free() ignored
(S malloc) An internal routine called free() on something that had
already been freed.
Duplicate modifier '%c' after '%c' in %s
(W unpack) You have applied the same modifier more than once after
a type in a pack template. See "pack" in perlfunc.
each on reference is experimental
(S experimental::autoderef) "each" with a scalar argument is
experimental and may change or be removed in a future Perl version.
If you want to take the risk of using this feature, simply disable
this warning:
no warnings "experimental::autoderef";
elseif should be elsif
(S syntax) There is no keyword "elseif" in Perl because Larry
thinks it's ugly. Your code will be interpreted as an attempt to
call a method named "elseif" for the class returned by the
following block. This is unlikely to be what you want.
Empty \%c{} in regex; marked by <-- HERE in m/%s/
(F) "\p" and "\P" are used to introduce a named Unicode property,
as described in perlunicode and perlre. You used "\p" or "\P" in a
regular expression without specifying the property name.
entering effective %s failed
(F) While under the "use filetest" pragma, switching the real and
effective uids or gids failed.
%ENV is aliased to %s
(F) You're running under taint mode, and the %ENV variable has been
aliased to another hash, so it doesn't reflect anymore the state of
the program's environment. This is potentially insecure.
Error converting file specification %s
(F) An error peculiar to VMS. Because Perl may have to deal with
file specifications in either VMS or Unix syntax, it converts them
to a single form when it must operate on them directly. Either
you've passed an invalid file specification to Perl, or you've
found a case the conversion routines don't handle. Drat.
Escape literal pattern white space under /x
(D deprecated) You compiled a regular expression pattern with "/x"
to ignore white space, and you used, as a literal, one of the
characters that Perl plans to eventually treat as white space. The
character must be escaped somehow, or it will work differently on a
future Perl that does treat it as white space. The easiest way is
to insert a backslash immediately before it, or to enclose it with
square brackets. This change is to bring Perl into conformance
with Unicode recommendations. Here are the five characters that
generate this warning: U+0085 NEXT LINE, U+200E LEFT-TO-RIGHT MARK,
U+200F RIGHT-TO-LEFT MARK, U+2028 LINE SEPARATOR, and U+2029
PARAGRAPH SEPARATOR.
Eval-group in insecure regular expression
(F) Perl detected tainted data when trying to compile a regular
expression that contains the "(?{ ... })" zero-width assertion,
which is unsafe. See "(?{ code })" in perlre, and perlsec.
Eval-group not allowed at runtime, use re 'eval' in regex m/%s/
(F) Perl tried to compile a regular expression containing the "(?{
... })" zero-width assertion at run time, as it would when the
pattern contains interpolated values. Since that is a security
risk, it is not allowed. If you insist, you may still do this by
using the "re 'eval'" pragma or by explicitly building the pattern
from an interpolated string at run time and using that in an
eval(). See "(?{ code })" in perlre.
Eval-group not allowed, use re 'eval' in regex m/%s/
(F) A regular expression contained the "(?{ ... })" zero-width
assertion, but that construct is only allowed when the "use re
'eval'" pragma is in effect. See "(?{ code })" in perlre.
EVAL without pos change exceeded limit in regex; marked by <-- HERE in
m/%s/
(F) You used a pattern that nested too many EVAL calls without
consuming any text. Restructure the pattern so that text is
consumed.
The <-- HERE shows whereabouts in the regular expression the
problem was discovered.
Excessively long <> operator
(F) The contents of a <> operator may not exceed the maximum size
of a Perl identifier. If you're just trying to glob a long list of
filenames, try using the glob() operator, or put the filenames into
a variable and glob that.
exec? I'm not *that* kind of operating system
(F) The "exec" function is not implemented on some systems, e.g.,
Symbian OS. See perlport.
Execution of %s aborted due to compilation errors.
(F) The final summary message when a Perl compilation fails.
exists argument is not a HASH or ARRAY element or a subroutine
(F) The argument to "exists" must be a hash or array element or a
subroutine with an ampersand, such as:
$foo{$bar}
$ref->{"susie"}[12]
&do_something
exists argument is not a subroutine name
(F) The argument to "exists" for "exists &sub" must be a subroutine
name, and not a subroutine call. "exists &sub()" will generate
this error.
Exiting eval via %s
(W exiting) You are exiting an eval by unconventional means, such
as a goto, or a loop control statement.
Exiting format via %s
(W exiting) You are exiting a format by unconventional means, such
as a goto, or a loop control statement.
Exiting pseudo-block via %s
(W exiting) You are exiting a rather special block construct (like
a sort block or subroutine) by unconventional means, such as a
goto, or a loop control statement. See "sort" in perlfunc.
Exiting subroutine via %s
(W exiting) You are exiting a subroutine by unconventional means,
such as a goto, or a loop control statement.
Exiting substitution via %s
(W exiting) You are exiting a substitution by unconventional means,
such as a return, a goto, or a loop control statement.
Expecting close bracket in regex; marked by <-- HERE in m/%s/
(F) You wrote something like
(?13
to denote a capturing group of the form "(?PARNO)", but omitted the
")".
Expecting '(?flags:(?[...' in regex; marked by <-- HERE in m/%s/
(F) The "(?[...])" extended character class regular expression
construct only allows character classes (including character class
escapes like "\d"), operators, and parentheses. The one exception
is "(?flags:...)" containing at least one flag and exactly one
"(?[...])" construct. This allows a regular expression containing
just "(?[...])" to be interpolated. If you see this error message,
then you probably have some other "(?...)" construct inside your
character class. See "Extended Bracketed Character Classes" in
perlrecharclass.
Experimental subroutine signatures not enabled
(F) To use subroutine signatures, you must first enable them:
no warnings "experimental::signatures";
use feature "signatures";
sub foo ($left, $right) { ... }
Experimental "%s" subs not enabled
(F) To use lexical subs, you must first enable them:
no warnings 'experimental::lexical_subs';
use feature 'lexical_subs';
my sub foo { ... }
Explicit blessing to '' (assuming package main)
(W misc) You are blessing a reference to a zero length string.
This has the effect of blessing the reference into the package
main. This is usually not what you want. Consider providing a
default target package, e.g. bless($ref, $p || 'MyPackage');
%s: Expression syntax
(A) You've accidentally run your script through csh instead of
Perl. Check the #! line, or manually feed your script into Perl
yourself.
%s failed--call queue aborted
(F) An untrapped exception was raised while executing a UNITCHECK,
CHECK, INIT, or END subroutine. Processing of the remainder of the
queue of such routines has been prematurely ended.
False [] range "%s" in regex; marked by <-- HERE in m/%s/
(W regexp)(F) A character class range must start and end at a
literal character, not another character class like "\d" or
"[:alpha:]". The "-" in your false range is interpreted as a
literal "-". In a "(?[...])" construct, this is an error, rather
than a warning. Consider quoting the "-", "\-". The <-- HERE
shows whereabouts in the regular expression the problem was
discovered. See perlre.
Fatal VMS error (status=%d) at %s, line %d
(P) An error peculiar to VMS. Something untoward happened in a VMS
system service or RTL routine; Perl's exit status should provide
more details. The filename in "at %s" and the line number in "line
%d" tell you which section of the Perl source code is distressed.
fcntl is not implemented
(F) Your machine apparently doesn't implement fcntl(). What is
this, a PDP-11 or something?
FETCHSIZE returned a negative value
(F) A tied array claimed to have a negative number of elements,
which is not possible.
Field too wide in 'u' format in pack
(W pack) Each line in an uuencoded string starts with a length
indicator which can't encode values above 63. So there is no point
in asking for a line length bigger than that. Perl will behave as
if you specified "u63" as the format.
Filehandle %s opened only for input
(W io) You tried to write on a read-only filehandle. If you
intended it to be a read-write filehandle, you needed to open it
with "+<" or "+>" or "+>>" instead of with "<" or nothing. If you
intended only to write the file, use ">" or ">>". See "open" in
perlfunc.
Filehandle %s opened only for output
(W io) You tried to read from a filehandle opened only for writing,
If you intended it to be a read/write filehandle, you needed to
open it with "+<" or "+>" or "+>>" instead of with ">". If you
intended only to read from the file, use "<". See "open" in
perlfunc. Another possibility is that you attempted to open
filedescriptor 0 (also known as STDIN) for output (maybe you closed
STDIN earlier?).
Filehandle %s reopened as %s only for input
(W io) You opened for reading a filehandle that got the same
filehandle id as STDOUT or STDERR. This occurred because you
closed STDOUT or STDERR previously.
Filehandle STDIN reopened as %s only for output
(W io) You opened for writing a filehandle that got the same
filehandle id as STDIN. This occurred because you closed STDIN
previously.
Final $ should be \$ or $name
(F) You must now decide whether the final $ in a string was meant
to be a literal dollar sign, or was meant to introduce a variable
name that happens to be missing. So you have to put either the
backslash or the name.
flock() on closed filehandle %s
(W closed) The filehandle you're attempting to flock() got itself
closed some time before now. Check your control flow. flock()
operates on filehandles. Are you attempting to call flock() on a
dirhandle by the same name?
Format not terminated
(F) A format must be terminated by a line with a solitary dot.
Perl got to the end of your file without finding such a line.
Format %s redefined
(W redefine) You redefined a format. To suppress this warning, say
{
no warnings 'redefine';
eval "format NAME =...";
}
Found = in conditional, should be ==
(W syntax) You said
if ($foo = 123)
when you meant
if ($foo == 123)
(or something like that).
%s found where operator expected
(S syntax) The Perl lexer knows whether to expect a term or an
operator. If it sees what it knows to be a term when it was
expecting to see an operator, it gives you this warning. Usually
it indicates that an operator or delimiter was omitted, such as a
semicolon.
gdbm store returned %d, errno %d, key "%s"
(S) A warning from the GDBM_File extension that a store failed.
gethostent not implemented
(F) Your C library apparently doesn't implement gethostent(),
probably because if it did, it'd feel morally obligated to return
every hostname on the Internet.
get%sname() on closed socket %s
(W closed) You tried to get a socket or peer socket name on a
closed socket. Did you forget to check the return value of your
socket() call?
getpwnam returned invalid UIC %#o for user "%s"
(S) A warning peculiar to VMS. The call to "sys$getuai" underlying
the "getpwnam" operator returned an invalid UIC.
getsockopt() on closed socket %s
(W closed) You tried to get a socket option on a closed socket.
Did you forget to check the return value of your socket() call?
See "getsockopt" in perlfunc.
given is experimental
(S experimental::smartmatch) "given" depends on smartmatch, which
is experimental, so its behavior may change or even be removed in
any future release of perl. See the explanation under
"Experimental Details on given and when" in perlsyn.
Global symbol "%s" requires explicit package name
(F) You've said "use strict" or "use strict vars", which indicates
that all variables must either be lexically scoped (using "my" or
"state"), declared beforehand using "our", or explicitly qualified
to say which package the global variable is in (using "::").
glob failed (%s)
(S glob) Something went wrong with the external program(s) used for
"glob" and "<*.c>". Usually, this means that you supplied a "glob"
pattern that caused the external program to fail and exit with a
nonzero status. If the message indicates that the abnormal exit
resulted in a coredump, this may also mean that your csh (C shell)
is broken. If so, you should change all of the csh-related
variables in config.sh: If you have tcsh, make the variables refer
to it as if it were csh (e.g. "full_csh='/usr/bin/tcsh'");
otherwise, make them all empty (except that "d_csh" should be
'undef') so that Perl will think csh is missing. In either case,
after editing config.sh, run "./Configure -S" and rebuild Perl.
Glob not terminated
(F) The lexer saw a left angle bracket in a place where it was
expecting a term, so it's looking for the corresponding right angle
bracket, and not finding it. Chances are you left some needed
parentheses out earlier in the line, and you really meant a "less
than".
gmtime(%f) failed
(W overflow) You called "gmtime" with a number that it could not
handle: too large, too small, or NaN. The returned value is
"undef".
gmtime(%f) too large
(W overflow) You called "gmtime" with a number that was larger than
it can reliably handle and "gmtime" probably returned the wrong
date. This warning is also triggered with NaN (the special not-a-
number value).
gmtime(%f) too small
(W overflow) You called "gmtime" with a number that was smaller
than it can reliably handle and "gmtime" probably returned the
wrong date.
Got an error from DosAllocMem
(P) An error peculiar to OS/2. Most probably you're using an
obsolete version of Perl, and this should not happen anyway.
goto must have label
(F) Unlike with "next" or "last", you're not allowed to goto an
unspecified destination. See "goto" in perlfunc.
Goto undefined subroutine%s
(F) You tried to call a subroutine with "goto &sub" syntax, but the
indicated subroutine hasn't been defined, or if it was, it has
since been undefined.
Group name must start with a non-digit word character in regex; marked
by <-- HERE in m/%s/
(F) Group names must follow the rules for perl identifiers, meaning
they must start with a non-digit word character. A common cause of
this error is using (?&0) instead of (?0). See perlre.
()-group starts with a count
(F) A ()-group started with a count. A count is supposed to follow
something: a template character or a ()-group. See "pack" in
perlfunc.
%s had compilation errors.
(F) The final summary message when a "perl -c" fails.
Had to create %s unexpectedly
(S internal) A routine asked for a symbol from a symbol table that
ought to have existed already, but for some reason it didn't, and
had to be created on an emergency basis to prevent a core dump.
Hash %%s missing the % in argument %d of %s()
(D deprecated) Really old Perl let you omit the % on hash names in
some spots. This is now heavily deprecated.
%s has too many errors
(F) The parser has given up trying to parse the program after 10
errors. Further error messages would likely be uninformative.
Hexadecimal number > 0xffffffff non-portable
(W portable) The hexadecimal number you specified is larger than
2**32-1 (4294967295) and therefore non-portable between systems.
See perlport for more on portability concerns.
Identifier too long
(F) Perl limits identifiers (names for variables, functions, etc.)
to about 250 characters for simple names, and somewhat more for
compound names (like $A::B). You've exceeded Perl's limits.
Future versions of Perl are likely to eliminate these arbitrary
limitations.
Ignoring zero length \N{} in character class in regex; marked by
<-- HERE in m/%s/
(W regexp) Named Unicode character escapes ("\N{...}") may return a
zero-length sequence. When such an escape is used in a character
class its behaviour is not well defined. Check that the correct
escape has been used, and the correct charname handler is in scope.
Illegal binary digit %s
(F) You used a digit other than 0 or 1 in a binary number.
Illegal binary digit %s ignored
(W digit) You may have tried to use a digit other than 0 or 1 in a
binary number. Interpretation of the binary number stopped before
the offending digit.
Illegal character after '_' in prototype for %s : %s
(W illegalproto) An illegal character was found in a prototype
declaration. The '_' in a prototype must be followed by a ';',
indicating the rest of the parameters are optional, or one of '@'
or '%', since those two will accept 0 or more final parameters.
Illegal character \%o (carriage return)
(F) Perl normally treats carriage returns in the program text as it
would any other whitespace, which means you should never see this
error when Perl was built using standard options. For some reason,
your version of Perl appears to have been built without this
support. Talk to your Perl administrator.
Illegal character in prototype for %s : %s
(W illegalproto) An illegal character was found in a prototype
declaration. Legal characters in prototypes are $, @, %, *, ;, [,
], &, \, and +. Perhaps you were trying to write a subroutine
signature but didn't enable that feature first ("use feature
'signatures'"), so your signature was instead interpreted as a bad
prototype.
Illegal declaration of anonymous subroutine
(F) When using the "sub" keyword to construct an anonymous
subroutine, you must always specify a block of code. See perlsub.
Illegal declaration of subroutine %s
(F) A subroutine was not declared correctly. See perlsub.
Illegal division by zero
(F) You tried to divide a number by 0. Either something was wrong
in your logic, or you need to put a conditional in to guard against
meaningless input.
Illegal hexadecimal digit %s ignored
(W digit) You may have tried to use a character other than 0 - 9 or
A - F, a - f in a hexadecimal number. Interpretation of the
hexadecimal number stopped before the illegal character.
Illegal modulus zero
(F) You tried to divide a number by 0 to get the remainder. Most
numbers don't take to this kindly.
Illegal number of bits in vec
(F) The number of bits in vec() (the third argument) must be a
power of two from 1 to 32 (or 64, if your platform supports that).
Illegal octal digit %s
(F) You used an 8 or 9 in an octal number.
Illegal octal digit %s ignored
(W digit) You may have tried to use an 8 or 9 in an octal number.
Interpretation of the octal number stopped before the 8 or 9.
Illegal pattern in regex; marked by <-- HERE in m/%s/
(F) You wrote something like
(?+foo)
The "+" is valid only when followed by digits, indicating a
capturing group. See "(?PARNO)".
Illegal switch in PERL5OPT: -%c
(X) The PERL5OPT environment variable may only be used to set the
following switches: -[CDIMUdmtw].
Ill-formed CRTL environ value "%s"
(W internal) A warning peculiar to VMS. Perl tried to read the
CRTL's internal environ array, and encountered an element without
the "=" delimiter used to separate keys from values. The element
is ignored.
Ill-formed message in prime_env_iter: |%s|
(W internal) A warning peculiar to VMS. Perl tried to read a
logical name or CLI symbol definition when preparing to iterate
over %ENV, and didn't see the expected delimiter between key and
value, so the line was ignored.
(in cleanup) %s
(W misc) This prefix usually indicates that a DESTROY() method
raised the indicated exception. Since destructors are usually
called by the system at arbitrary points during execution, and
often a vast number of times, the warning is issued only once for
any number of failures that would otherwise result in the same
message being repeated.
Failure of user callbacks dispatched using the "G_KEEPERR" flag
could also result in this warning. See "G_KEEPERR" in perlcall.
Incomplete expression within '(?[ ])' in regex; marked by <-- HERE in
m/%s/
(F) There was a syntax error within the "(?[ ])". This can happen
if the expression inside the construct was completely empty, or if
there are too many or few operands for the number of operators.
Perl is not smart enough to give you a more precise indication as
to what is wrong.
Inconsistent hierarchy during C3 merge of class '%s': merging failed on
parent '%s'
(F) The method resolution order (MRO) of the given class is not
C3-consistent, and you have enabled the C3 MRO for this class. See
the C3 documentation in mro for more information.
In EBCDIC the v-string components cannot exceed 2147483647
(F) An error peculiar to EBCDIC. Internally, v-strings are stored
as Unicode code points, and encoded in EBCDIC as UTF-EBCDIC. The
UTF-EBCDIC encoding is limited to code points no larger than
2147483647 (0x7FFFFFFF).
Infinite recursion in regex
(F) You used a pattern that references itself without consuming any
input text. You should check the pattern to ensure that recursive
patterns either consume text or fail.
Initialization of state variables in list context currently forbidden
(F) Currently the implementation of "state" only permits the
initialization of scalar variables in scalar context. Re-write
"state ($a) = 42" as "state $a = 42" to change from list to scalar
context. Constructions such as "state (@a) = foo()" will be
supported in a future perl release.
%%s[%s] in scalar context better written as $%s[%s]
(W syntax) In scalar context, you've used an array index/value
slice (indicated by %) to select a single element of an array.
Generally it's better to ask for a scalar value (indicated by $).
The difference is that $foo[&bar] always behaves like a scalar,
both in the value it returns and when evaluating its argument,
while %foo[&bar] provides a list context to its subscript, which
can do weird things if you're expecting only one subscript. When
called in list context, it also returns the index (what &bar
returns) in addition to the value.
%%s{%s} in scalar context better written as $%s{%s}
(W syntax) In scalar context, you've used a hash key/value slice
(indicated by %) to select a single element of a hash. Generally
it's better to ask for a scalar value (indicated by $). The
difference is that $foo{&bar} always behaves like a scalar, both in
the value it returns and when evaluating its argument, while
@foo{&bar} and provides a list context to its subscript, which can
do weird things if you're expecting only one subscript. When
called in list context, it also returns the key in addition to the
value.
Insecure dependency in %s
(F) You tried to do something that the tainting mechanism didn't
like. The tainting mechanism is turned on when you're running
setuid or setgid, or when you specify -T to turn it on explicitly.
The tainting mechanism labels all data that's derived directly or
indirectly from the user, who is considered to be unworthy of your
trust. If any such data is used in a "dangerous" operation, you
get this error. See perlsec for more information.
Insecure directory in %s
(F) You can't use system(), exec(), or a piped open in a setuid or
setgid script if $ENV{PATH} contains a directory that is writable
by the world. Also, the PATH must not contain any relative
directory. See perlsec.
Insecure $ENV{%s} while running %s
(F) You can't use system(), exec(), or a piped open in a setuid or
setgid script if any of $ENV{PATH}, $ENV{IFS}, $ENV{CDPATH},
$ENV{ENV}, $ENV{BASH_ENV} or $ENV{TERM} are derived from data
supplied (or potentially supplied) by the user. The script must
set the path to a known value, using trustworthy data. See
perlsec.
Insecure user-defined property %s
(F) Perl detected tainted data when trying to compile a regular
expression that contains a call to a user-defined character
property function, i.e. "\p{IsFoo}" or "\p{InFoo}". See "User-
Defined Character Properties" in perlunicode and perlsec.
In '(?...)', splitting the initial '(?' is deprecated in regex; marked
by <-- HERE in m/%s/
(D regexp, deprecated) The two-character sequence "(?" in this
context in a regular expression pattern should be an indivisible
token, with nothing intervening between the "(" and the "?", but
you separated them. Due to an accident of implementation, this
prohibition was not enforced, but we do plan to forbid it in a
future Perl version. This message serves as giving you fair
warning of this pending change.
Integer overflow in format string for %s
(F) The indexes and widths specified in the format string of
"printf()" or "sprintf()" are too large. The numbers must not
overflow the size of integers for your architecture.
Integer overflow in %s number
(S overflow) The hexadecimal, octal or binary number you have
specified either as a literal or as an argument to hex() or oct()
is too big for your architecture, and has been converted to a
floating point number. On a 32-bit architecture the largest
hexadecimal, octal or binary number representable without overflow
is 0xFFFFFFFF, 037777777777, or 0b11111111111111111111111111111111
respectively. Note that Perl transparently promotes all numbers to
a floating point representation internally--subject to loss of
precision errors in subsequent operations.
Integer overflow in srand
(S overflow) The number you have passed to srand is too big to fit
in your architecture's integer representation. The number has been
replaced with the largest integer supported (0xFFFFFFFF on 32-bit
architectures). This means you may be getting less randomness than
you expect, because different random seeds above the maximum will
return the same sequence of random numbers.
Integer overflow in version
Integer overflow in version %d
(W overflow) Some portion of a version initialization is too large
for the size of integers for your architecture. This is not a
warning because there is no rational reason for a version to try
and use an element larger than typically 2**32. This is usually
caused by trying to use some odd mathematical operation as a
version, like 100/9.
Internal disaster in regex; marked by <-- HERE in m/%s/
(P) Something went badly wrong in the regular expression parser.
The <-- HERE shows whereabouts in the regular expression the
problem was discovered.
Internal inconsistency in tracking vforks
(S) A warning peculiar to VMS. Perl keeps track of the number of
times you've called "fork" and "exec", to determine whether the
current call to "exec" should affect the current script or a
subprocess (see "exec LIST" in perlvms). Somehow, this count has
become scrambled, so Perl is making a guess and treating this
"exec" as a request to terminate the Perl script and execute the
specified command.
internal %<num>p might conflict with future printf extensions
(S internal) Perl's internal routine that handles "printf" and
"sprintf" formatting follows a slightly different set of rules when
called from C or XS code. Specifically, formats consisting of
digits followed by "p" (e.g., "%7p") are reserved for future use.
If you see this message, then an XS module tried to call that
routine with one such reserved format.
Internal urp in regex; marked by <-- HERE in m/%s/
(P) Something went badly awry in the regular expression parser.
The <-- HERE shows whereabouts in the regular expression the
problem was discovered.
%s (...) interpreted as function
(W syntax) You've run afoul of the rule that says that any list
operator followed by parentheses turns into a function, with all
the list operators arguments found inside the parentheses. See
"Terms and List Operators (Leftward)" in perlop.
Invalid %s attribute: %s
(F) The indicated attribute for a subroutine or variable was not
recognized by Perl or by a user-supplied handler. See attributes.
Invalid %s attributes: %s
(F) The indicated attributes for a subroutine or variable were not
recognized by Perl or by a user-supplied handler. See attributes.
Invalid character in charnames alias definition; marked by <-- HERE in
'%s
(F) You tried to create a custom alias for a character name, with
the ":alias" option to "use charnames" and the specified character
in the indicated name isn't valid. See "CUSTOM ALIASES" in
charnames.
Invalid \0 character in %s for %s: %s\0%s
(W syscalls) Embedded \0 characters in pathnames or other system
call arguments produce a warning as of 5.20. The parts after the
\0 were formerly ignored by system calls.
Invalid character in \N{...}; marked by <-- HERE in \N{%s}
(F) Only certain characters are valid for character names. The
indicated one isn't. See "CUSTOM ALIASES" in charnames.
Invalid conversion in %s: "%s"
(W printf) Perl does not understand the given format conversion.
See "sprintf" in perlfunc.
Invalid escape in the specified encoding in regex; marked by <-- HERE
in m/%s/
(W regexp)(F) The numeric escape (for example "\xHH") of value <
256 didn't correspond to a single character through the conversion
from the encoding specified by the encoding pragma. The escape was
replaced with REPLACEMENT CHARACTER (U+FFFD) instead, except within
"(?[ ])", where it is a fatal error. The <-- HERE shows
whereabouts in the regular expression the escape was discovered.
Invalid hexadecimal number in \N{U+...}
Invalid hexadecimal number in \N{U+...} in regex; marked by <-- HERE in
m/%s/
(F) The character constant represented by "..." is not a valid
hexadecimal number. Either it is empty, or you tried to use a
character other than 0 - 9 or A - F, a - f in a hexadecimal number.
Invalid module name %s with -%c option: contains single ':'
(F) The module argument to perl's -m and -M command-line options
cannot contain single colons in the module name, but only in the
arguments after "=". In other words, -MFoo::Bar=:baz is ok, but
-MFoo:Bar=baz is not.
Invalid mro name: '%s'
(F) You tried to "mro::set_mro("classname", "foo")" or "use mro
'foo'", where "foo" is not a valid method resolution order (MRO).
Currently, the only valid ones supported are "dfs" and "c3", unless
you have loaded a module that is a MRO plugin. See mro and
perlmroapi.
Invalid negative number (%s) in chr
(W utf8) You passed a negative number to "chr". Negative numbers
are not valid character numbers, so it returns the Unicode
replacement character (U+FFFD).
invalid option -D%c, use -D'' to see choices
(S debugging) Perl was called with invalid debugger flags. Call
perl with the -D option with no flags to see the list of acceptable
values. See also "-Dletters" in perlrun.
Invalid [] range "%s" in regex; marked by <-- HERE in m/%s/
(F) The range specified in a character class had a minimum
character greater than the maximum character. One possibility is
that you forgot the "{}" from your ending "\x{}" - "\x" without the
curly braces can go only up to "ff". The <-- HERE shows
whereabouts in the regular expression the problem was discovered.
See perlre.
Invalid range "%s" in transliteration operator
(F) The range specified in the tr/// or y/// operator had a minimum
character greater than the maximum character. See perlop.
Invalid separator character %s in attribute list
(F) Something other than a colon or whitespace was seen between the
elements of an attribute list. If the previous attribute had a
parenthesised parameter list, perhaps that list was terminated too
soon. See attributes.
Invalid separator character %s in PerlIO layer specification %s
(W layer) When pushing layers onto the Perl I/O system, something
other than a colon or whitespace was seen between the elements of a
layer list. If the previous attribute had a parenthesised
parameter list, perhaps that list was terminated too soon.
Invalid strict version format (%s)
(F) A version number did not meet the "strict" criteria for
versions. A "strict" version number is a positive decimal number
(integer or decimal-fraction) without exponentiation or else a
dotted-decimal v-string with a leading 'v' character and at least
three components. The parenthesized text indicates which criteria
were not met. See the version module for more details on allowed
version formats.
Invalid type '%s' in %s
(F) The given character is not a valid pack or unpack type. See
"pack" in perlfunc.
(W) The given character is not a valid pack or unpack type but used
to be silently ignored.
Invalid version format (%s)
(F) A version number did not meet the "lax" criteria for versions.
A "lax" version number is a positive decimal number (integer or
decimal-fraction) without exponentiation or else a dotted-decimal
v-string. If the v-string has fewer than three components, it must
have a leading 'v' character. Otherwise, the leading 'v' is
optional. Both decimal and dotted-decimal versions may have a
trailing "alpha" component separated by an underscore character
after a fractional or dotted-decimal component. The parenthesized
text indicates which criteria were not met. See the version module
for more details on allowed version formats.
Invalid version object
(F) The internal structure of the version object was invalid.
Perhaps the internals were modified directly in some way or an
arbitrary reference was blessed into the "version" class.
In '(*VERB...)', splitting the initial '(*' is deprecated in regex;
marked by <-- HERE in m/%s/
(D regexp, deprecated) The two-character sequence "(*" in this
context in a regular expression pattern should be an indivisible
token, with nothing intervening between the "(" and the "*", but
you separated them. Due to an accident of implementation, this
prohibition was not enforced, but we do plan to forbid it in a
future Perl version. This message serves as giving you fair
warning of this pending change.
ioctl is not implemented
(F) Your machine apparently doesn't implement ioctl(), which is
pretty strange for a machine that supports C.
ioctl() on unopened %s
(W unopened) You tried ioctl() on a filehandle that was never
opened. Check your control flow and number of arguments.
IO layers (like '%s') unavailable
(F) Your Perl has not been configured to have PerlIO, and therefore
you cannot use IO layers. To have PerlIO, Perl must be configured
with 'useperlio'.
IO::Socket::atmark not implemented on this architecture
(F) Your machine doesn't implement the sockatmark() functionality,
neither as a system call nor an ioctl call (SIOCATMARK).
$* is no longer supported
(D deprecated, syntax) The special variable $*, deprecated in older
perls, has been removed as of 5.10.0 and is no longer supported.
In previous versions of perl the use of $* enabled or disabled
multi-line matching within a string.
Instead of using $* you should use the "/m" (and maybe "/s") regexp
modifiers. You can enable "/m" for a lexical scope (even a whole
file) with "use re '/m'". (In older versions: when $* was set to a
true value then all regular expressions behaved as if they were
written using "/m".)
$# is no longer supported
(D deprecated, syntax) The special variable $#, deprecated in older
perls, has been removed as of 5.10.0 and is no longer supported.
You should use the printf/sprintf functions instead.
'%s' is not a code reference
(W overload) The second (fourth, sixth, ...) argument of
overload::constant needs to be a code reference. Either an
anonymous subroutine, or a reference to a subroutine.
'%s' is not an overloadable type
(W overload) You tried to overload a constant type the overload
package is unaware of.
-i used with no filenames on the command line, reading from STDIN
(S inplace) The "-i" option was passed on the command line,
indicating that the script is intended to edit files in place, but
no files were given. This is usually a mistake, since editing
STDIN in place doesn't make sense, and can be confusing because it
can make perl look like it is hanging when it is really just trying
to read from STDIN. You should either pass a filename to edit, or
remove "-i" from the command line. See perlrun for more details.
Junk on end of regexp in regex m/%s/
(P) The regular expression parser is confused.
keys on reference is experimental
(S experimental::autoderef) "keys" with a scalar argument is
experimental and may change or be removed in a future Perl version.
If you want to take the risk of using this feature, simply disable
this warning:
no warnings "experimental::autoderef";
Label not found for "last %s"
(F) You named a loop to break out of, but you're not currently in a
loop of that name, not even if you count where you were called
from. See "last" in perlfunc.
Label not found for "next %s"
(F) You named a loop to continue, but you're not currently in a
loop of that name, not even if you count where you were called
from. See "last" in perlfunc.
Label not found for "redo %s"
(F) You named a loop to restart, but you're not currently in a loop
of that name, not even if you count where you were called from.
See "last" in perlfunc.
leaving effective %s failed
(F) While under the "use filetest" pragma, switching the real and
effective uids or gids failed.
length/code after end of string in unpack
(F) While unpacking, the string buffer was already used up when an
unpack length/code combination tried to obtain more data. This
results in an undefined value for the length. See "pack" in
perlfunc.
length() used on %s (did you mean "scalar(%s)"?)
(W syntax) You used length() on either an array or a hash when you
probably wanted a count of the items.
Array size can be obtained by doing:
scalar(@array);
The number of items in a hash can be obtained by doing:
scalar(keys %hash);
Lexing code attempted to stuff non-Latin-1 character into Latin-1 input
(F) An extension is attempting to insert text into the current
parse (using lex_stuff_pvn or similar), but tried to insert a
character that couldn't be part of the current input. This is an
inherent pitfall of the stuffing mechanism, and one of the reasons
to avoid it. Where it is necessary to stuff, stuffing only plain
ASCII is recommended.
Lexing code internal error (%s)
(F) Lexing code supplied by an extension violated the lexer's API
in a detectable way.
listen() on closed socket %s
(W closed) You tried to do a listen on a closed socket. Did you
forget to check the return value of your socket() call? See
"listen" in perlfunc.
List form of piped open not implemented
(F) On some platforms, notably Windows, the three-or-more-arguments
form of "open" does not support pipes, such as "open($pipe, '|-',
@args)". Use the two-argument "open($pipe, '|prog arg1 arg2...')"
form instead.
localtime(%f) failed
(W overflow) You called "localtime" with a number that it could not
handle: too large, too small, or NaN. The returned value is
"undef".
localtime(%f) too large
(W overflow) You called "localtime" with a number that was larger
than it can reliably handle and "localtime" probably returned the
wrong date. This warning is also triggered with NaN (the special
not-a-number value).
localtime(%f) too small
(W overflow) You called "localtime" with a number that was smaller
than it can reliably handle and "localtime" probably returned the
wrong date.
Lookbehind longer than %d not implemented in regex m/%s/
(F) There is currently a limit on the length of string which
lookbehind can handle. This restriction may be eased in a future
release.
Lost precision when %s %f by 1
(W imprecision) The value you attempted to increment or decrement
by one is too large for the underlying floating point
representation to store accurately, hence the target of "++" or
"--" is unchanged. Perl issues this warning because it has already
switched from integers to floating point when values are too large
for integers, and now even floating point is insufficient. You may
wish to switch to using Math::BigInt explicitly.
lstat() on filehandle%s
(W io) You tried to do an lstat on a filehandle. What did you mean
by that? lstat() makes sense only on filenames. (Perl did a
fstat() instead on the filehandle.)
lvalue attribute %s already-defined subroutine
(W misc) Although attributes.pm allows this, turning the lvalue
attribute on or off on a Perl subroutine that is already defined
does not always work properly. It may or may not do what you want,
depending on what code is inside the subroutine, with exact details
subject to change between Perl versions. Only do this if you
really know what you are doing.
lvalue attribute ignored after the subroutine has been defined
(W misc) Using the ":lvalue" declarative syntax to make a Perl
subroutine an lvalue subroutine after it has been defined is not
permitted. To make the subroutine an lvalue subroutine, add the
lvalue attribute to the definition, or put the "sub foo :lvalue;"
declaration before the definition.
See also attributes.pm.
Magical list constants are not supported
(F) You assigned a magical array to a stash element, and then tried
to use the subroutine from the same slot. You are asking Perl to
do something it cannot do, details subject to change between Perl
versions.
Malformed integer in [] in pack
(F) Between the brackets enclosing a numeric repeat count only
digits are permitted. See "pack" in perlfunc.
Malformed integer in [] in unpack
(F) Between the brackets enclosing a numeric repeat count only
digits are permitted. See "pack" in perlfunc.
Malformed PERLLIB_PREFIX
(F) An error peculiar to OS/2. PERLLIB_PREFIX should be of the
form
prefix1;prefix2
or
prefix1 prefix2
with nonempty prefix1 and prefix2. If "prefix1" is indeed a prefix
of a builtin library search path, prefix2 is substituted. The
error may appear if components are not found, or are too long. See
"PERLLIB_PREFIX" in perlos2.
Malformed prototype for %s: %s
(F) You tried to use a function with a malformed prototype. The
syntax of function prototypes is given a brief compile-time check
for obvious errors like invalid characters. A more rigorous check
is run when the function is called. Perhaps the function's author
was trying to write a subroutine signature but didn't enable that
feature first ("use feature 'signatures'"), so the signature was
instead interpreted as a bad prototype.
Malformed UTF-8 character (%s)
(S utf8)(F) Perl detected a string that didn't comply with UTF-8
encoding rules, even though it had the UTF8 flag on.
One possible cause is that you set the UTF8 flag yourself for data
that you thought to be in UTF-8 but it wasn't (it was for example
legacy 8-bit data). To guard against this, you can use
Encode::decode_utf8.
If you use the ":encoding(UTF-8)" PerlIO layer for input, invalid
byte sequences are handled gracefully, but if you use ":utf8", the
flag is set without validating the data, possibly resulting in this
error message.
See also "Handling Malformed Data" in Encode.
Malformed UTF-8 character immediately after '%s'
(F) You said "use utf8", but the program file doesn't comply with
UTF-8 encoding rules. The message prints out the properly encoded
characters just before the first bad one. If "utf8" warnings are
enabled, a warning is generated that gives more details about the
type of malformation.
Malformed UTF-8 returned by \N{%s} immediately after '%s'
(F) The charnames handler returned malformed UTF-8.
Malformed UTF-8 string in '%c' format in unpack
(F) You tried to unpack something that didn't comply with UTF-8
encoding rules and perl was unable to guess how to make more
progress.
Malformed UTF-8 string in pack
(F) You tried to pack something that didn't comply with UTF-8
encoding rules and perl was unable to guess how to make more
progress.
Malformed UTF-8 string in unpack
(F) You tried to unpack something that didn't comply with UTF-8
encoding rules and perl was unable to guess how to make more
progress.
Malformed UTF-16 surrogate
(F) Perl thought it was reading UTF-16 encoded character data but
while doing it Perl met a malformed Unicode surrogate.
Mandatory parameter follows optional parameter
(F) In a subroutine signature, you wrote something like "$a =
undef, $b", making an earlier parameter optional and a later one
mandatory. Parameters are filled from left to right, so it's
impossible for the caller to omit an earlier one and pass a later
one. If you want to act as if the parameters are filled from right
to left, declare the rightmost optional and then shuffle the
parameters around in the subroutine's body.
Matched non-Unicode code point 0x%X against Unicode property; may not
be portable
(S non_unicode) Perl allows strings to contain a superset of
Unicode code points; each code point may be as large as what is
storable in an unsigned integer on your system, but these may not
be accepted by other languages/systems. This message occurs when
you matched a string containing such a code point against a regular
expression pattern, and the code point was matched against a
Unicode property, "\p{...}" or "\P{...}". Unicode properties are
only defined on Unicode code points, so the result of this match is
undefined by Unicode, but Perl (starting in v5.20) treats non-
Unicode code points as if they were typical unassigned Unicode
ones, and matched this one accordingly. Whether a given property
matches these code points or not is specified in "Properties
accessible through \p{} and \P{}" in perluniprops.
This message is suppressed (unless it has been made fatal) if it is
immaterial to the results of the match if the code point is Unicode
or not. For example, the property "\p{ASCII_Hex_Digit}" only can
match the 22 characters "[0-9A-Fa-f]", so obviously all other code
points, Unicode or not, won't match it. (And "\P{ASCII_Hex_Digit}"
will match every code point except these 22.)
Getting this message indicates that the outcome of the match
arguably should have been the opposite of what actually happened.
If you think that is the case, you may wish to make the
"non_unicode" warnings category fatal; if you agree with Perl's
decision, you may wish to turn off this category.
See "Beyond Unicode code points" in perlunicode for more
information.
%s matches null string many times in regex; marked by <-- HERE in m/%s/
(W regexp) The pattern you've specified would be an infinite loop
if the regular expression engine didn't specifically check for
that. The <-- HERE shows whereabouts in the regular expression the
problem was discovered. See perlre.
Maximal count of pending signals (%u) exceeded
(F) Perl aborted due to too high a number of signals pending. This
usually indicates that your operating system tried to deliver
signals too fast (with a very high priority), starving the perl
process from resources it would need to reach a point where it can
process signals safely. (See "Deferred Signals (Safe Signals)" in
perlipc.)
"%s" may clash with future reserved word
(W) This warning may be due to running a perl5 script through a
perl4 interpreter, especially if the word that is being warned
about is "use" or "my".
'%' may not be used in pack
(F) You can't pack a string by supplying a checksum, because the
checksumming process loses information, and you can't go the other
way. See "unpack" in perlfunc.
Method for operation %s not found in package %s during blessing
(F) An attempt was made to specify an entry in an overloading table
that doesn't resolve to a valid subroutine. See overload.
Method %s not permitted
See Server error.
Might be a runaway multi-line %s string starting on line %d
(S) An advisory indicating that the previous error may have been
caused by a missing delimiter on a string or pattern, because it
eventually ended earlier on the current line.
Misplaced _ in number
(W syntax) An underscore (underbar) in a numeric constant did not
separate two digits.
Missing argument in %s
(W uninitialized) A printf-type format required more arguments than
were supplied.
Missing argument to -%c
(F) The argument to the indicated command line switch must follow
immediately after the switch, without intervening spaces.
Missing braces on \N{}
Missing braces on \N{} in regex; marked by <-- HERE in m/%s/
(F) Wrong syntax of character name literal "\N{charname}" within
double-quotish context. This can also happen when there is a space
(or comment) between the "\N" and the "{" in a regex with the "/x"
modifier. This modifier does not change the requirement that the
brace immediately follow the "\N".
Missing braces on \o{}
(F) A "\o" must be followed immediately by a "{" in double-quotish
context.
Missing comma after first argument to %s function
(F) While certain functions allow you to specify a filehandle or an
"indirect object" before the argument list, this ain't one of them.
Missing command in piped open
(W pipe) You used the "open(FH, "| command")" or "open(FH, "command
|")" construction, but the command was missing or blank.
Missing control char name in \c
(F) A double-quoted string ended with "\c", without the required
control character name.
Missing ']' in prototype for %s : %s
(W illegalproto) A grouping was started with "[" but never closed
with "]".
Missing name in "%s sub"
(F) The syntax for lexically scoped subroutines requires that they
have a name with which they can be found.
Missing $ on loop variable
(F) Apparently you've been programming in csh too much. Variables
are always mentioned with the $ in Perl, unlike in the shells,
where it can vary from one line to the next.
(Missing operator before %s?)
(S syntax) This is an educated guess made in conjunction with the
message "%s found where operator expected". Often the missing
operator is a comma.
Missing right brace on \%c{} in regex; marked by <-- HERE in m/%s/
(F) Missing right brace in "\x{...}", "\p{...}", "\P{...}", or
"\N{...}".
Missing right brace on \N{}
Missing right brace on \N{} or unescaped left brace after \N
(F) "\N" has two meanings.
The traditional one has it followed by a name enclosed in braces,
meaning the character (or sequence of characters) given by that
name. Thus "\N{ASTERISK}" is another way of writing "*", valid in
both double-quoted strings and regular expression patterns. In
patterns, it doesn't have the meaning an unescaped "*" does.
Starting in Perl 5.12.0, "\N" also can have an additional meaning
(only) in patterns, namely to match a non-newline character. (This
is short for "[^\n]", and like "." but is not affected by the "/s"
regex modifier.)
This can lead to some ambiguities. When "\N" is not followed
immediately by a left brace, Perl assumes the "[^\n]" meaning.
Also, if the braces form a valid quantifier such as "\N{3}" or
"\N{5,}", Perl assumes that this means to match the given quantity
of non-newlines (in these examples, 3; and 5 or more,
respectively). In all other case, where there is a "\N{" and a
matching "}", Perl assumes that a character name is desired.
However, if there is no matching "}", Perl doesn't know if it was
mistakenly omitted, or if "[^\n]{" was desired, and raises this
error. If you meant the former, add the right brace; if you meant
the latter, escape the brace with a backslash, like so: "\N\{"
Missing right curly or square bracket
(F) The lexer counted more opening curly or square brackets than
closing ones. As a general rule, you'll find it's missing near the
place you were last editing.
(Missing semicolon on previous line?)
(S syntax) This is an educated guess made in conjunction with the
message "%s found where operator expected". Don't automatically
put a semicolon on the previous line just because you saw this
message.
Modification of a read-only value attempted
(F) You tried, directly or indirectly, to change the value of a
constant. You didn't, of course, try "2 = 1", because the compiler
catches that. But an easy way to do the same thing is:
sub mod { $_[0] = 1 }
mod(2);
Another way is to assign to a substr() that's off the end of the
string.
Yet another way is to assign to a "foreach" loop VAR when VAR is
aliased to a constant in the look LIST:
$x = 1;
foreach my $n ($x, 2) {
$n *= 2; # modifies the $x, but fails on attempt to
} # modify the 2
Modification of non-creatable array value attempted, %s
(F) You tried to make an array value spring into existence, and the
subscript was probably negative, even counting from end of the
array backwards.
Modification of non-creatable hash value attempted, %s
(P) You tried to make a hash value spring into existence, and it
couldn't be created for some peculiar reason.
Module name must be constant
(F) Only a bare module name is allowed as the first argument to a
"use".
Module name required with -%c option
(F) The "-M" or "-m" options say that Perl should load some module,
but you omitted the name of the module. Consult perlrun for full
details about "-M" and "-m".
More than one argument to '%s' open
(F) The "open" function has been asked to open multiple files.
This can happen if you are trying to open a pipe to a command that
takes a list of arguments, but have forgotten to specify a piped
open mode. See "open" in perlfunc for details.
mprotect for COW string %p %u failed with %d
(S) You compiled perl with -DPERL_DEBUG_READONLY_COW (see "Copy on
Write" in perlguts), but a shared string buffer could not be made
read-only.
mprotect for %p %u failed with %d
(S) You compiled perl with -DPERL_DEBUG_READONLY_OPS (see
perlhacktips), but an op tree could not be made read-only.
mprotect RW for COW string %p %u failed with %d
(S) You compiled perl with -DPERL_DEBUG_READONLY_COW (see "Copy on
Write" in perlguts), but a read-only shared string buffer could not
be made mutable.
mprotect RW for %p %u failed with %d
(S) You compiled perl with -DPERL_DEBUG_READONLY_OPS (see
perlhacktips), but a read-only op tree could not be made mutable
before freeing the ops.
msg%s not implemented
(F) You don't have System V message IPC on your system.
Multidimensional syntax %s not supported
(W syntax) Multidimensional arrays aren't written like $foo[1,2,3].
They're written like $foo[1][2][3], as in C.
'/' must follow a numeric type in unpack
(F) You had an unpack template that contained a '/', but this did
not follow some unpack specification producing a numeric value.
See "pack" in perlfunc.
"my sub" not yet implemented
(F) Lexically scoped subroutines are not yet implemented. Don't
try that yet.
"my %s" used in sort comparison
(W syntax) The package variables $a and $b are used for sort
comparisons. You used $a or $b in as an operand to the "<=>" or
"cmp" operator inside a sort comparison block, and the variable had
earlier been declared as a lexical variable. Either qualify the
sort variable with the package name, or rename the lexical
variable.
"my" variable %s can't be in a package
(F) Lexically scoped variables aren't in a package, so it doesn't
make sense to try to declare one with a package qualifier on the
front. Use local() if you want to localize a package variable.
Name "%s::%s" used only once: possible typo
(W once) Typographical errors often show up as unique variable
names. If you had a good reason for having a unique name, then
just mention it again somehow to suppress the message. The "our"
declaration is also provided for this purpose.
NOTE: This warning detects package symbols that have been used only
once. This means lexical variables will never trigger this warning.
It also means that all of the package variables $c, @c, %c, as well
as *c, &c, sub c{}, c(), and c (the filehandle or format) are
considered the same; if a program uses $c only once but also uses
any of the others it will not trigger this warning. Symbols
beginning with an underscore and symbols using special identifiers
(q.v. perldata) are exempt from this warning.
Need exactly 3 octal digits in regex; marked by <-- HERE in m/%s/
(F) Within "(?[ ])", all constants interpreted as octal need to
be exactly 3 digits long. This helps catch some ambiguities. If
your constant is too short, add leading zeros, like
(?[ [ \078 ] ]) # Syntax error!
(?[ [ \0078 ] ]) # Works
(?[ [ \007 8 ] ]) # Clearer
The maximum number this construct can express is "\777". If you
need a larger one, you need to use \o{} instead. If you meant two
separate things, you need to separate them:
(?[ [ \7776 ] ]) # Syntax error!
(?[ [ \o{7776} ] ]) # One meaning
(?[ [ \777 6 ] ]) # Another meaning
(?[ [ \777 \006 ] ]) # Still another
Negative '/' count in unpack
(F) The length count obtained from a length/code unpack operation
was negative. See "pack" in perlfunc.
Negative length
(F) You tried to do a read/write/send/recv operation with a buffer
length that is less than 0. This is difficult to imagine.
Negative offset to vec in lvalue context
(F) When "vec" is called in an lvalue context, the second argument
must be greater than or equal to zero.
Nested quantifiers in regex; marked by <-- HERE in m/%s/
(F) You can't quantify a quantifier without intervening
parentheses. So things like ** or +* or ?* are illegal. The
<-- HERE shows whereabouts in the regular expression the problem
was discovered.
Note that the minimal matching quantifiers, "*?", "+?", and "??"
appear to be nested quantifiers, but aren't. See perlre.
%s never introduced
(S internal) The symbol in question was declared but somehow went
out of scope before it could possibly have been used.
next::method/next::can/maybe::next::method cannot find enclosing method
(F) "next::method" needs to be called within the context of a real
method in a real package, and it could not find such a context.
See mro.
\N in a character class must be a named character: \N{...} in regex;
marked by <-- HERE in m/%s/
(F) The new (as of Perl 5.12) meaning of "\N" as "[^\n]" is not
valid in a bracketed character class, for the same reason that "."
in a character class loses its specialness: it matches almost
everything, which is probably not what you want.
\N{} in character class restricted to one character in regex; marked by
<-- HERE in m/%s/
(F) Named Unicode character escapes ("\N{...}") may return a multi-
character sequence. Such an escape may not be used in a character
class, because character classes always match one character of
input. Check that the correct escape has been used, and the
correct charname handler is in scope. The <-- HERE shows
whereabouts in the regular expression the problem was discovered.
\N{NAME} must be resolved by the lexer in regex; marked by <-- HERE in
m/%s/
(F) When compiling a regex pattern, an unresolved named character
or sequence was encountered. This can happen in any of several
ways that bypass the lexer, such as using single-quotish context,
or an extra backslash in double-quotish:
$re = '\N{SPACE}'; # Wrong!
$re = "\\N{SPACE}"; # Wrong!
/$re/;
Instead, use double-quotes with a single backslash:
$re = "\N{SPACE}"; # ok
/$re/;
The lexer can be bypassed as well by creating the pattern from
smaller components:
$re = '\N';
/${re}{SPACE}/; # Wrong!
It's not a good idea to split a construct in the middle like this,
and it doesn't work here. Instead use the solution above.
Finally, the message also can happen under the "/x" regex modifier
when the "\N" is separated by spaces from the "{", in which case,
remove the spaces.
/\N {SPACE}/x; # Wrong!
/\N{SPACE}/x; # ok
No %s allowed while running setuid
(F) Certain operations are deemed to be too insecure for a setuid
or setgid script to even be allowed to attempt. Generally speaking
there will be another way to do what you want that is, if not
secure, at least securable. See perlsec.
No code specified for -%c
(F) Perl's -e and -E command-line options require an argument. If
you want to run an empty program, pass the empty string as a
separate argument or run a program consisting of a single 0 or 1:
perl -e ""
perl -e0
perl -e1
No comma allowed after %s
(F) A list operator that has a filehandle or "indirect object" is
not allowed to have a comma between that and the following
arguments. Otherwise it'd be just another one of the arguments.
One possible cause for this is that you expected to have imported a
constant to your name space with use or import while no such
importing took place, it may for example be that your operating
system does not support that particular constant. Hopefully you
did use an explicit import list for the constants you expect to
see; please see "use" in perlfunc and "import" in perlfunc. While
an explicit import list would probably have caught this error
earlier it naturally does not remedy the fact that your operating
system still does not support that constant. Maybe you have a typo
in the constants of the symbol import list of use or import or in
the constant name at the line where this error was triggered?
No command into which to pipe on command line
(F) An error peculiar to VMS. Perl handles its own command line
redirection, and found a '|' at the end of the command line, so it
doesn't know where you want to pipe the output from this command.
No DB::DB routine defined
(F) The currently executing code was compiled with the -d switch,
but for some reason the current debugger (e.g. perl5db.pl or a
"Devel::" module) didn't define a routine to be called at the
beginning of each statement.
No dbm on this machine
(P) This is counted as an internal error, because every machine
should supply dbm nowadays, because Perl comes with SDBM. See
SDBM_File.
No DB::sub routine defined
(F) The currently executing code was compiled with the -d switch,
but for some reason the current debugger (e.g. perl5db.pl or a
"Devel::" module) didn't define a "DB::sub" routine to be called at
the beginning of each ordinary subroutine call.
No directory specified for -I
(F) The -I command-line switch requires a directory name as part of
the same argument. Use -Ilib, for instance. -I lib won't work.
No error file after 2> or 2>> on command line
(F) An error peculiar to VMS. Perl handles its own command line
redirection, and found a '2>' or a '2>>' on the command line, but
can't find the name of the file to which to write data destined for
stderr.
No group ending character '%c' found in template
(F) A pack or unpack template has an opening '(' or '[' without its
matching counterpart. See "pack" in perlfunc.
No input file after < on command line
(F) An error peculiar to VMS. Perl handles its own command line
redirection, and found a '<' on the command line, but can't find
the name of the file from which to read data for stdin.
No next::method '%s' found for %s
(F) "next::method" found no further instances of this method name
in the remaining packages of the MRO of this class. If you don't
want it throwing an exception, use "maybe::next::method" or
"next::can". See mro.
Non-hex character in regex; marked by <-- HERE in m/%s/
(F) In a regular expression, there was a non-hexadecimal character
where a hex one was expected, like
(?[ [ \xDG ] ])
(?[ [ \x{DEKA} ] ])
Non-octal character in regex; marked by <-- HERE in m/%s/
(F) In a regular expression, there was a non-octal character where
an octal one was expected, like
(?[ [ \o{1278} ] ])
Non-octal character '%c'. Resolved as "%s"
(W digit) In parsing an octal numeric constant, a character was
unexpectedly encountered that isn't octal. The resulting value is
as indicated.
"no" not allowed in expression
(F) The "no" keyword is recognized and executed at compile time,
and returns no useful value. See perlmod.
Non-string passed as bitmask
(W misc) A number has been passed as a bitmask argument to
select(). Use the vec() function to construct the file descriptor
bitmasks for select. See "select" in perlfunc.
No output file after > on command line
(F) An error peculiar to VMS. Perl handles its own command line
redirection, and found a lone '>' at the end of the command line,
so it doesn't know where you wanted to redirect stdout.
No output file after > or >> on command line
(F) An error peculiar to VMS. Perl handles its own command line
redirection, and found a '>' or a '>>' on the command line, but
can't find the name of the file to which to write data destined for
stdout.
No package name allowed for variable %s in "our"
(F) Fully qualified variable names are not allowed in "our"
declarations, because that doesn't make much sense under existing
semantics. Such syntax is reserved for future extensions.
No Perl script found in input
(F) You called "perl -x", but no line was found in the file
beginning with #! and containing the word "perl".
No setregid available
(F) Configure didn't find anything resembling the setregid() call
for your system.
No setreuid available
(F) Configure didn't find anything resembling the setreuid() call
for your system.
No such class %s
(F) You provided a class qualifier in a "my", "our" or "state"
declaration, but this class doesn't exist at this point in your
program.
No such class field "%s" in variable %s of type %s
(F) You tried to access a key from a hash through the indicated
typed variable but that key is not allowed by the package of the
same type. The indicated package has restricted the set of allowed
keys using the fields pragma.
No such hook: %s
(F) You specified a signal hook that was not recognized by Perl.
Currently, Perl accepts "__DIE__" and "__WARN__" as valid signal
hooks.
No such pipe open
(P) An error peculiar to VMS. The internal routine my_pclose()
tried to close a pipe which hadn't been opened. This should have
been caught earlier as an attempt to close an unopened filehandle.
No such signal: SIG%s
(W signal) You specified a signal name as a subscript to %SIG that
was not recognized. Say "kill -l" in your shell to see the valid
signal names on your system.
Not a CODE reference
(F) Perl was trying to evaluate a reference to a code value (that
is, a subroutine), but found a reference to something else instead.
You can use the ref() function to find out what kind of ref it
really was. See also perlref.
Not a GLOB reference
(F) Perl was trying to evaluate a reference to a "typeglob" (that
is, a symbol table entry that looks like *foo), but found a
reference to something else instead. You can use the ref()
function to find out what kind of ref it really was. See perlref.
Not a HASH reference
(F) Perl was trying to evaluate a reference to a hash value, but
found a reference to something else instead. You can use the ref()
function to find out what kind of ref it really was. See perlref.
Not an ARRAY reference
(F) Perl was trying to evaluate a reference to an array value, but
found a reference to something else instead. You can use the ref()
function to find out what kind of ref it really was. See perlref.
Not an unblessed ARRAY reference
(F) You passed a reference to a blessed array to "push", "shift" or
another array function. These only accept unblessed array
references or arrays beginning explicitly with "@".
Not a SCALAR reference
(F) Perl was trying to evaluate a reference to a scalar value, but
found a reference to something else instead. You can use the ref()
function to find out what kind of ref it really was. See perlref.
Not a subroutine reference
(F) Perl was trying to evaluate a reference to a code value (that
is, a subroutine), but found a reference to something else instead.
You can use the ref() function to find out what kind of ref it
really was. See also perlref.
Not a subroutine reference in overload table
(F) An attempt was made to specify an entry in an overloading table
that doesn't somehow point to a valid subroutine. See overload.
Not enough arguments for %s
(F) The function requires more arguments than you specified.
Not enough format arguments
(W syntax) A format specified more picture fields than the next
line supplied. See perlform.
%s: not found
(A) You've accidentally run your script through the Bourne shell
instead of Perl. Check the #! line, or manually feed your script
into Perl yourself.
(?[...]) not valid in locale in regex; marked by <-- HERE in m/%s/
(F) "(?[...])" cannot be used within the scope of a "use locale" or
with an "/l" regular expression modifier, as that would require
deferring to run-time the calculation of what it should evaluate
to, and it is regex compile-time only.
no UTC offset information; assuming local time is UTC
(S) A warning peculiar to VMS. Perl was unable to find the local
timezone offset, so it's assuming that local system time is
equivalent to UTC. If it's not, define the logical name
SYS$TIMEZONE_DIFFERENTIAL to translate to the number of seconds
which need to be added to UTC to get local time.
Null filename used
(F) You can't require the null filename, especially because on many
machines that means the current directory! See "require" in
perlfunc.
NULL OP IN RUN
(S debugging) Some internal routine called run() with a null opcode
pointer.
Null picture in formline
(F) The first argument to formline must be a valid format picture
specification. It was found to be empty, which probably means you
supplied it an uninitialized value. See perlform.
Null realloc
(P) An attempt was made to realloc NULL.
NULL regexp argument
(P) The internal pattern matching routines blew it big time.
NULL regexp parameter
(P) The internal pattern matching routines are out of their gourd.
Number too long
(F) Perl limits the representation of decimal numbers in programs
to about 250 characters. You've exceeded that length. Future
versions of Perl are likely to eliminate this arbitrary limitation.
In the meantime, try using scientific notation (e.g. "1e6" instead
of "1_000_000").
Number with no digits
(F) Perl was looking for a number but found nothing that looked
like a number. This happens, for example with "\o{}", with no
number between the braces.
Octal number > 037777777777 non-portable
(W portable) The octal number you specified is larger than 2**32-1
(4294967295) and therefore non-portable between systems. See
perlport for more on portability concerns.
Odd name/value argument for subroutine
(F) A subroutine using a slurpy hash parameter in its signature
received an odd number of arguments to populate the hash. It
requires the arguments to be paired, with the same number of keys
as values. The caller of the subroutine is presumably at fault.
Inconveniently, this error will be reported at the location of the
subroutine, not that of the caller.
Odd number of arguments for overload::constant
(W overload) The call to overload::constant contained an odd number
of arguments. The arguments should come in pairs.
Odd number of elements in anonymous hash
(W misc) You specified an odd number of elements to initialize a
hash, which is odd, because hashes come in key/value pairs.
Odd number of elements in hash assignment
(W misc) You specified an odd number of elements to initialize a
hash, which is odd, because hashes come in key/value pairs.
Offset outside string
(F)(W layer) You tried to do a read/write/send/recv/seek operation
with an offset pointing outside the buffer. This is difficult to
imagine. The sole exceptions to this are that zero padding will
take place when going past the end of the string when either
"sysread()"ing a file, or when seeking past the end of a scalar
opened for I/O (in anticipation of future reads and to imitate the
behaviour with real files).
%s() on unopened %s
(W unopened) An I/O operation was attempted on a filehandle that
was never initialized. You need to do an open(), a sysopen(), or a
socket() call, or call a constructor from the FileHandle package.
-%s on unopened filehandle %s
(W unopened) You tried to invoke a file test operator on a
filehandle that isn't open. Check your control flow. See also
"-X" in perlfunc.
oops: oopsAV
(S internal) An internal warning that the grammar is screwed up.
oops: oopsHV
(S internal) An internal warning that the grammar is screwed up.
Opening dirhandle %s also as a file
(D io, deprecated) You used open() to associate a filehandle to a
symbol (glob or scalar) that already holds a dirhandle. Although
legal, this idiom might render your code confusing and is
deprecated.
Opening filehandle %s also as a directory
(D io, deprecated) You used opendir() to associate a dirhandle to a
symbol (glob or scalar) that already holds a filehandle. Although
legal, this idiom might render your code confusing and is
deprecated.
Operand with no preceding operator in regex; marked by <-- HERE in
m/%s/
(F) You wrote something like
(?[ \p{Digit} \p{Thai} ])
There are two operands, but no operator giving how you want to
combine them.
Operation "%s": no method found, %s
(F) An attempt was made to perform an overloaded operation for
which no handler was defined. While some handlers can be
autogenerated in terms of other handlers, there is no default
handler for any operation, unless the "fallback" overloading key is
specified to be true. See overload.
Operation "%s" returns its argument for non-Unicode code point 0x%X
(S non_unicode) You performed an operation requiring Unicode
semantics on a code point that is not in Unicode, so what it should
do is not defined. Perl has chosen to have it do nothing, and warn
you.
If the operation shown is "ToFold", it means that case-insensitive
matching in a regular expression was done on the code point.
If you know what you are doing you can turn off this warning by "no
warnings 'non_unicode';".
Operation "%s" returns its argument for UTF-16 surrogate U+%X
(S surrogate) You performed an operation requiring Unicode
semantics on a Unicode surrogate. Unicode frowns upon the use of
surrogates for anything but storing strings in UTF-16, but
semantics are (reluctantly) defined for the surrogates, and they
are to do nothing for this operation. Because the use of
surrogates can be dangerous, Perl warns.
If the operation shown is "ToFold", it means that case-insensitive
matching in a regular expression was done on the code point.
If you know what you are doing you can turn off this warning by "no
warnings 'surrogate';".
Operator or semicolon missing before %s
(S ambiguous) You used a variable or subroutine call where the
parser was expecting an operator. The parser has assumed you
really meant to use an operator, but this is highly likely to be
incorrect. For example, if you say "*foo *foo" it will be
interpreted as if you said "*foo * 'foo'".
Optional parameter lacks default expression
(F) In a subroutine signature, you wrote something like "$a =",
making a named optional parameter without a default value. A
nameless optional parameter is permitted to have no default value,
but a named one must have a specific default. You probably want
"$a = undef".
"our" variable %s redeclared
(W misc) You seem to have already declared the same global once
before in the current lexical scope.
Out of memory!
(X) The malloc() function returned 0, indicating there was
insufficient remaining memory (or virtual memory) to satisfy the
request. Perl has no option but to exit immediately.
At least in Unix you may be able to get past this by increasing
your process datasize limits: in csh/tcsh use "limit" and "limit
datasize n" (where "n" is the number of kilobytes) to check the
current limits and change them, and in ksh/bash/zsh use "ulimit -a"
and "ulimit -d n", respectively.
Out of memory during %s extend
(X) An attempt was made to extend an array, a list, or a string
beyond the largest possible memory allocation.
Out of memory during "large" request for %s
(F) The malloc() function returned 0, indicating there was
insufficient remaining memory (or virtual memory) to satisfy the
request. However, the request was judged large enough (compile-
time default is 64K), so a possibility to shut down by trapping
this error is granted.
Out of memory during request for %s
(X)(F) The malloc() function returned 0, indicating there was
insufficient remaining memory (or virtual memory) to satisfy the
request.
The request was judged to be small, so the possibility to trap it
depends on the way perl was compiled. By default it is not
trappable. However, if compiled for this, Perl may use the
contents of $^M as an emergency pool after die()ing with this
message. In this case the error is trappable once, and the error
message will include the line and file where the failed request
happened.
Out of memory during ridiculously large request
(F) You can't allocate more than 2^31+"small amount" bytes. This
error is most likely to be caused by a typo in the Perl program.
e.g., $arr[time] instead of $arr[$time].
Out of memory for yacc stack
(F) The yacc parser wanted to grow its stack so it could continue
parsing, but realloc() wouldn't give it more memory, virtual or
otherwise.
'.' outside of string in pack
(F) The argument to a '.' in your template tried to move the
working position to before the start of the packed string being
built.
'@' outside of string in unpack
(F) You had a template that specified an absolute position outside
the string being unpacked. See "pack" in perlfunc.
'@' outside of string with malformed UTF-8 in unpack
(F) You had a template that specified an absolute position outside
the string being unpacked. The string being unpacked was also
invalid UTF-8. See "pack" in perlfunc.
overload arg '%s' is invalid
(W overload) The overload pragma was passed an argument it did not
recognize. Did you mistype an operator?
Overloaded dereference did not return a reference
(F) An object with an overloaded dereference operator was
dereferenced, but the overloaded operation did not return a
reference. See overload.
Overloaded qr did not return a REGEXP
(F) An object with a "qr" overload was used as part of a match, but
the overloaded operation didn't return a compiled regexp. See
overload.
%s package attribute may clash with future reserved word: %s
(W reserved) A lowercase attribute name was used that had a
package-specific handler. That name might have a meaning to Perl
itself some day, even though it doesn't yet. Perhaps you should
use a mixed-case attribute name, instead. See attributes.
pack/unpack repeat count overflow
(F) You can't specify a repeat count so large that it overflows
your signed integers. See "pack" in perlfunc.
page overflow
(W io) A single call to write() produced more lines than can fit on
a page. See perlform.
panic: %s
(P) An internal error.
panic: attempt to call %s in %s
(P) One of the file test operators entered a code branch that calls
an ACL related-function, but that function is not available on this
platform. Earlier checks mean that it should not be possible to
enter this branch on this platform.
panic: child pseudo-process was never scheduled
(P) A child pseudo-process in the ithreads implementation on
Windows was not scheduled within the time period allowed and
therefore was not able to initialize properly.
panic: ck_grep, type=%u
(P) Failed an internal consistency check trying to compile a grep.
panic: ck_split, type=%u
(P) Failed an internal consistency check trying to compile a split.
panic: corrupt saved stack index %ld
(P) The savestack was requested to restore more localized values
than there are in the savestack.
panic: del_backref
(P) Failed an internal consistency check while trying to reset a
weak reference.
panic: die %s
(P) We popped the context stack to an eval context, and then
discovered it wasn't an eval context.
panic: do_subst
(P) The internal pp_subst() routine was called with invalid
operational data.
panic: do_trans_%s
(P) The internal do_trans routines were called with invalid
operational data.
panic: fold_constants JMPENV_PUSH returned %d
(P) While attempting folding constants an exception other than an
"eval" failure was caught.
panic: frexp
(P) The library function frexp() failed, making printf("%f")
impossible.
panic: goto, type=%u, ix=%ld
(P) We popped the context stack to a context with the specified
label, and then discovered it wasn't a context we know how to do a
goto in.
panic: gp_free failed to free glob pointer
(P) The internal routine used to clear a typeglob's entries tried
repeatedly, but each time something re-created entries in the glob.
Most likely the glob contains an object with a reference back to
the glob and a destructor that adds a new object to the glob.
panic: INTERPCASEMOD, %s
(P) The lexer got into a bad state at a case modifier.
panic: INTERPCONCAT, %s
(P) The lexer got into a bad state parsing a string with brackets.
panic: kid popen errno read
(F) A forked child returned an incomprehensible message about its
errno.
panic: last, type=%u
(P) We popped the context stack to a block context, and then
discovered it wasn't a block context.
panic: leave_scope clearsv
(P) A writable lexical variable became read-only somehow within the
scope.
panic: leave_scope inconsistency %u
(P) The savestack probably got out of sync. At least, there was an
invalid enum on the top of it.
panic: magic_killbackrefs
(P) Failed an internal consistency check while trying to reset all
weak references to an object.
panic: malloc, %s
(P) Something requested a negative number of bytes of malloc.
panic: memory wrap
(P) Something tried to allocate either more memory than possible or
a negative amount.
panic: pad_alloc, %p!=%p
(P) The compiler got confused about which scratch pad it was
allocating and freeing temporaries and lexicals from.
panic: pad_free curpad, %p!=%p
(P) The compiler got confused about which scratch pad it was
allocating and freeing temporaries and lexicals from.
panic: pad_free po
(P) An invalid scratch pad offset was detected internally.
panic: pad_reset curpad, %p!=%p
(P) The compiler got confused about which scratch pad it was
allocating and freeing temporaries and lexicals from.
panic: pad_sv po
(P) An invalid scratch pad offset was detected internally.
panic: pad_swipe curpad, %p!=%p
(P) The compiler got confused about which scratch pad it was
allocating and freeing temporaries and lexicals from.
panic: pad_swipe po
(P) An invalid scratch pad offset was detected internally.
panic: pp_iter, type=%u
(P) The foreach iterator got called in a non-loop context frame.
panic: pp_match%s
(P) The internal pp_match() routine was called with invalid
operational data.
panic: pp_split, pm=%p, s=%p
(P) Something terrible went wrong in setting up for the split.
panic: realloc, %s
(P) Something requested a negative number of bytes of realloc.
panic: reference miscount on nsv in sv_replace() (%d != 1)
(P) The internal sv_replace() function was handed a new SV with a
reference count other than 1.
panic: restartop in %s
(P) Some internal routine requested a goto (or something like it),
and didn't supply the destination.
panic: return, type=%u
(P) We popped the context stack to a subroutine or eval context,
and then discovered it wasn't a subroutine or eval context.
panic: scan_num, %s
(P) scan_num() got called on something that wasn't a number.
panic: Sequence (?{...}): no code block found in regex m/%s/
(P) While compiling a pattern that has embedded (?{}) or (??{})
code blocks, perl couldn't locate the code block that should have
already been seen and compiled by perl before control passed to the
regex compiler.
panic: strxfrm() gets absurd - a => %u, ab => %u
(P) The interpreter's sanity check of the C function strxfrm()
failed. In your current locale the returned transformation of the
string "ab" is shorter than that of the string "a", which makes no
sense.
panic: sv_chop %s
(P) The sv_chop() routine was passed a position that is not within
the scalar's string buffer.
panic: sv_insert, midend=%p, bigend=%p
(P) The sv_insert() routine was told to remove more string than
there was string.
panic: top_env
(P) The compiler attempted to do a goto, or something weird like
that.
panic: unimplemented op %s (#%d) called
(P) The compiler is screwed up and attempted to use an op that
isn't permitted at run time.
panic: utf16_to_utf8: odd bytelen
(P) Something tried to call utf16_to_utf8 with an odd (as opposed
to even) byte length.
panic: utf16_to_utf8_reversed: odd bytelen
(P) Something tried to call utf16_to_utf8_reversed with an odd (as
opposed to even) byte length.
panic: yylex, %s
(P) The lexer got into a bad state while processing a case
modifier.
Parentheses missing around "%s" list
(W parenthesis) You said something like
my $foo, $bar = @_;
when you meant
my ($foo, $bar) = @_;
Remember that "my", "our", "local" and "state" bind tighter than
comma.
Parsing code internal error (%s)
(F) Parsing code supplied by an extension violated the parser's API
in a detectable way.
Passing malformed UTF-8 to "%s" is deprecated
(D deprecated, utf8) This message indicates a bug either in the
Perl core or in XS code. Such code was trying to find out if a
character, allegedly stored internally encoded as UTF-8, was of a
given type, such as being punctuation or a digit. But the
character was not encoded in legal UTF-8. The %s is replaced by a
string that can be used by knowledgeable people to determine what
the type being checked against was. If "utf8" warnings are
enabled, a further message is raised, giving details of the
malformation.
Pattern subroutine nesting without pos change exceeded limit in regex
(F) You used a pattern that uses too many nested subpattern calls
without consuming any text. Restructure the pattern so text is
consumed before the nesting limit is exceeded.
"-p" destination: %s
(F) An error occurred during the implicit output invoked by the
"-p" command-line switch. (This output goes to STDOUT unless
you've redirected it with select().)
Perl folding rules are not up-to-date for 0x%X; please use the perlbug
utility to report; in regex; marked by <-- HERE in m/%s/
(S regexp) You used a regular expression with case-insensitive
matching, and there is a bug in Perl in which the built-in regular
expression folding rules are not accurate. This may lead to
incorrect results. Please report this as a bug using the perlbug
utility.
Perl_my_%s() not available
(F) Your platform has very uncommon byte-order and integer size, so
it was not possible to set up some or all fixed-width byte-order
conversion functions. This is only a problem when you're using the
'<' or '>' modifiers in (un)pack templates. See "pack" in
perlfunc.
Perl %s required (did you mean %s?)--this is only %s, stopped
(F) The code you are trying to run has asked for a newer version of
Perl than you are running. Perhaps "use 5.10" was written instead
of "use 5.010" or "use v5.10". Without the leading "v", the number
is interpreted as a decimal, with every three digits after the
decimal point representing a part of the version number. So 5.10
is equivalent to v5.100.
Perl %s required--this is only %s, stopped
(F) The module in question uses features of a version of Perl more
recent than the currently running version. How long has it been
since you upgraded, anyway? See "require" in perlfunc.
PERL_SH_DIR too long
(F) An error peculiar to OS/2. PERL_SH_DIR is the directory to
find the "sh"-shell in. See "PERL_SH_DIR" in perlos2.
PERL_SIGNALS illegal: "%s"
(X) See "PERL_SIGNALS" in perlrun for legal values.
Perls since %s too modern--this is %s, stopped
(F) The code you are trying to run claims it will not run on the
version of Perl you are using because it is too new. Maybe the
code needs to be updated, or maybe it is simply wrong and the
version check should just be removed.
perl: warning: Non hex character in '$ENV{PERL_HASH_SEED}', seed only
partially set
(S) PERL_HASH_SEED should match /^\s*(?:0x)?[0-9a-fA-F]+\s*\z/ but
it contained a non hex character. This could mean you are not
using the hash seed you think you are.
perl: warning: Setting locale failed.
(S) The whole warning message will look something like:
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LC_ALL = "En_US",
LANG = (unset)
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
Exactly what were the failed locale settings varies. In the above
the settings were that the LC_ALL was "En_US" and the LANG had no
value. This error means that Perl detected that you and/or your
operating system supplier and/or system administrator have set up
the so-called locale system but Perl could not use those settings.
This was not dead serious, fortunately: there is a "default locale"
called "C" that Perl can and will use, and the script will be run.
Before you really fix the problem, however, you will get the same
error message each time you run Perl. How to really fix the
problem can be found in perllocale section LOCALE PROBLEMS.
perl: warning: strange setting in '$ENV{PERL_PERTURB_KEYS}': '%s'
(S) Perl was run with the environment variable PERL_PERTURB_KEYS
defined but containing an unexpected value. The legal values of
this setting are as follows.
Numeric | String | Result
--------+---------------+-----------------------------------------
0 | NO | Disables key traversal randomization
1 | RANDOM | Enables full key traversal randomization
2 | DETERMINISTIC | Enables repeatable key traversal
| | randomization
Both numeric and string values are accepted, but note that string
values are case sensitive. The default for this setting is
"RANDOM" or 1.
pid %x not a child
(W exec) A warning peculiar to VMS. Waitpid() was asked to wait
for a process which isn't a subprocess of the current process.
While this is fine from VMS' perspective, it's probably not what
you intended.
'P' must have an explicit size in unpack
(F) The unpack format P must have an explicit size, not "*".
pop on reference is experimental
(S experimental::autoderef) "pop" with a scalar argument is
experimental and may change or be removed in a future Perl version.
If you want to take the risk of using this feature, simply disable
this warning:
no warnings "experimental::autoderef";
POSIX class [:%s:] unknown in regex; marked by <-- HERE in m/%s/
(F) The class in the character class [: :] syntax is unknown. The
<-- HERE shows whereabouts in the regular expression the problem
was discovered. Note that the POSIX character classes do not have
the "is" prefix the corresponding C interfaces have: in other
words, it's "[[:print:]]", not "isprint". See perlre.
POSIX getpgrp can't take an argument
(F) Your system has POSIX getpgrp(), which takes no argument,
unlike the BSD version, which takes a pid.
POSIX syntax [%c %c] belongs inside character classes in regex; marked
by <-- HERE in m/%s/
(W regexp) The character class constructs [: :], [= =], and [. .]
go inside character classes, the [] are part of the construct, for
example: /[012[:alpha:]345]/. Note that [= =] and [. .] are not
currently implemented; they are simply placeholders for future
extensions and will cause fatal errors. The <-- HERE shows
whereabouts in the regular expression the problem was discovered.
See perlre.
POSIX syntax [. .] is reserved for future extensions in regex; marked
by <-- HERE in m/%s/
(F) Within regular expression character classes ([]) the syntax
beginning with "[." and ending with ".]" is reserved for future
extensions. If you need to represent those character sequences
inside a regular expression character class, just quote the square
brackets with the backslash: "\[." and ".\]". The <-- HERE shows
whereabouts in the regular expression the problem was discovered.
See perlre.
POSIX syntax [= =] is reserved for future extensions in regex; marked
by <-- HERE in m/%s/
(F) Within regular expression character classes ([]) the syntax
beginning with "[=" and ending with "=]" is reserved for future
extensions. If you need to represent those character sequences
inside a regular expression character class, just quote the square
brackets with the backslash: "\[=" and "=\]". The <-- HERE shows
whereabouts in the regular expression the problem was discovered.
See perlre.
Possible attempt to put comments in qw() list
(W qw) qw() lists contain items separated by whitespace; as with
literal strings, comment characters are not ignored, but are
instead treated as literal data. (You may have used different
delimiters than the parentheses shown here; braces are also
frequently used.)
You probably wrote something like this:
@list = qw(
a # a comment
b # another comment
);
when you should have written this:
@list = qw(
a
b
);
If you really want comments, build your list the old-fashioned way,
with quotes and commas:
@list = (
'a', # a comment
'b', # another comment
);
Possible attempt to separate words with commas
(W qw) qw() lists contain items separated by whitespace; therefore
commas aren't needed to separate the items. (You may have used
different delimiters than the parentheses shown here; braces are
also frequently used.)
You probably wrote something like this:
qw! a, b, c !;
which puts literal commas into some of the list items. Write it
without commas if you don't want them to appear in your data:
qw! a b c !;
Possible memory corruption: %s overflowed 3rd argument
(F) An ioctl() or fcntl() returned more than Perl was bargaining
for. Perl guesses a reasonable buffer size, but puts a sentinel
byte at the end of the buffer just in case. This sentinel byte got
clobbered, and Perl assumes that memory is now corrupted. See
"ioctl" in perlfunc.
Possible precedence issue with control flow operator
(W syntax) There is a possible problem with the mixing of a control
flow operator (e.g. "return") and a low-precedence operator like
"or". Consider:
sub { return $a or $b; }
This is parsed as:
sub { (return $a) or $b; }
Which is effectively just:
sub { return $a; }
Either use parentheses or the high-precedence variant of the
operator.
Note this may be also triggered for constructs like:
sub { 1 if die; }
Possible precedence problem on bitwise %c operator
(W precedence) Your program uses a bitwise logical operator in
conjunction with a numeric comparison operator, like this :
if ($x & $y == 0) { ... }
This expression is actually equivalent to "$x & ($y == 0)", due to
the higher precedence of "==". This is probably not what you want.
(If you really meant to write this, disable the warning, or,
better, put the parentheses explicitly and write "$x & ($y == 0)").
Possible unintended interpolation of $\ in regex
(W ambiguous) You said something like "m/$\/" in a regex. The
regex "m/foo$\s+bar/m" translates to: match the word 'foo', the
output record separator (see "$\" in perlvar) and the letter 's'
(one time or more) followed by the word 'bar'.
If this is what you intended then you can silence the warning by
using "m/${\}/" (for example: "m/foo${\}s+bar/").
If instead you intended to match the word 'foo' at the end of the
line followed by whitespace and the word 'bar' on the next line
then you can use "m/$(?)\/" (for example: "m/foo$(?)\s+bar/").
Possible unintended interpolation of %s in string
(W ambiguous) You said something like '@foo' in a double-quoted
string but there was no array @foo in scope at the time. If you
wanted a literal @foo, then write it as \@foo; otherwise find out
what happened to the array you apparently lost track of.
Postfix dereference is experimental
(S experimental::postderef) This warning is emitted if you use the
experimental postfix dereference syntax. Simply suppress the
warning if you want to use the feature, but know that in doing so
you are taking the risk of using an experimental feature which may
change or be removed in a future Perl version:
no warnings "experimental::postderef";
use feature "postderef", "postderef_qq";
$ref->$*;
$aref->@*;
$aref->@[@indices];
... etc ...
Precedence problem: open %s should be open(%s)
(S precedence) The old irregular construct
open FOO || die;
is now misinterpreted as
open(FOO || die);
because of the strict regularization of Perl 5's grammar into unary
and list operators. (The old open was a little of both.) You must
put parentheses around the filehandle, or use the new "or" operator
instead of "||".
Premature end of script headers
See Server error.
printf() on closed filehandle %s
(W closed) The filehandle you're writing to got itself closed
sometime before now. Check your control flow.
print() on closed filehandle %s
(W closed) The filehandle you're printing on got itself closed
sometime before now. Check your control flow.
Process terminated by SIG%s
(W) This is a standard message issued by OS/2 applications, while
*nix applications die in silence. It is considered a feature of
the OS/2 port. One can easily disable this by appropriate
sighandlers, see "Signals" in perlipc. See also "Process
terminated by SIGTERM/SIGINT" in perlos2.
Property '%s' is unknown in regex; marked by <-- HERE in m/%s/
(F) The named property which you specified via "\p" or "\P" is not
one known to Perl. Perhaps you misspelled the name? See
"Properties accessible through \p{} and \P{}" in perluniprops for a
complete list of available official properties. If it is a user-
defined property it must have been defined by the time the regular
expression is compiled.
Prototype after '%c' for %s : %s
(W illegalproto) A character follows % or @ in a prototype. This
is useless, since % and @ gobble the rest of the subroutine
arguments.
Prototype mismatch: %s vs %s
(S prototype) The subroutine being declared or defined had
previously been declared or defined with a different function
prototype.
Prototype not terminated
(F) You've omitted the closing parenthesis in a function prototype
definition.
Prototype '%s' overridden by attribute 'prototype(%s)' in %s
(W prototype) A prototype was declared in both the parentheses
after the sub name and via the prototype attribute. The prototype
in parentheses is useless, since it will be replaced by the
prototype from the attribute before it's ever used.
\p{} uses Unicode rules, not locale rules
(W) You compiled a regular expression that contained a Unicode
property match ("\p" or "\P"), but the regular expression is also
being told to use the run-time locale, not Unicode. Instead, use a
POSIX character class, which should know about the locale's rules.
(See "POSIX Character Classes" in perlrecharclass.)
Even if the run-time locale is ISO 8859-1 (Latin1), which is a
subset of Unicode, some properties will give results that are not
valid for that subset.
Here are a couple of examples to help you see what's going on. If
the locale is ISO 8859-7, the character at code point 0xD7 is the
"GREEK CAPITAL LETTER CHI". But in Unicode that code point means
the "MULTIPLICATION SIGN" instead, and "\p" always uses the Unicode
meaning. That means that "\p{Alpha}" won't match, but
"[[:alpha:]]" should. Only in the Latin1 locale are all the
characters in the same positions as they are in Unicode. But, even
here, some properties give incorrect results. An example is
"\p{Changes_When_Uppercased}" which is true for "LATIN SMALL LETTER
Y WITH DIAERESIS", but since the upper case of that character is
not in Latin1, in that locale it doesn't change when upper cased.
push on reference is experimental
(S experimental::autoderef) "push" with a scalar argument is
experimental and may change or be removed in a future Perl version.
If you want to take the risk of using this feature, simply disable
this warning:
no warnings "experimental::autoderef";
Quantifier follows nothing in regex; marked by <-- HERE in m/%s/
(F) You started a regular expression with a quantifier. Backslash
it if you meant it literally. The <-- HERE shows whereabouts in
the regular expression the problem was discovered. See perlre.
Quantifier in {,} bigger than %d in regex; marked by <-- HERE in m/%s/
(F) There is currently a limit to the size of the min and max
values of the {min,max} construct. The <-- HERE shows whereabouts
in the regular expression the problem was discovered. See perlre.
Quantifier {n,m} with n > m can't match in regex
Quantifier {n,m} with n > m can't match in regex; marked by <-- HERE in
m/%s/
(W regexp) Minima should be less than or equal to maxima. If you
really want your regexp to match something 0 times, just put {0}.
Quantifier unexpected on zero-length expression in regex; marked by <--
HERE in m/%s/
(W regexp) You applied a regular expression quantifier in a place
where it makes no sense, such as on a zero-width assertion. Try
putting the quantifier inside the assertion instead. For example,
the way to match "abc" provided that it is followed by three
repetitions of "xyz" is "/abc(?=(?:xyz){3})/", not
"/abc(?=xyz){3}/".
The <-- HERE shows whereabouts in the regular expression the
problem was discovered.
Range iterator outside integer range
(F) One (or both) of the numeric arguments to the range operator
".." are outside the range which can be represented by integers
internally. One possible workaround is to force Perl to use
magical string increment by prepending "0" to your numbers.
readdir() attempted on invalid dirhandle %s
(W io) The dirhandle you're reading from is either closed or not
really a dirhandle. Check your control flow.
readline() on closed filehandle %s
(W closed) The filehandle you're reading from got itself closed
sometime before now. Check your control flow.
read() on closed filehandle %s
(W closed) You tried to read from a closed filehandle.
read() on unopened filehandle %s
(W unopened) You tried to read from a filehandle that was never
opened.
Reallocation too large: %x
(F) You can't allocate more than 64K on an MS-DOS machine.
realloc() of freed memory ignored
(S malloc) An internal routine called realloc() on something that
had already been freed.
Recompile perl with -DDEBUGGING to use -D switch
(S debugging) You can't use the -D option unless the code to
produce the desired output is compiled into Perl, which entails
some overhead, which is why it's currently left out of your copy.
Recursive call to Perl_load_module in PerlIO_find_layer
(P) It is currently not permitted to load modules when creating a
filehandle inside an %INC hook. This can happen with "open my $fh,
'<', \$scalar", which implicitly loads PerlIO::scalar. Try loading
PerlIO::scalar explicitly first.
Recursive inheritance detected in package '%s'
(F) While calculating the method resolution order (MRO) of a
package, Perl believes it found an infinite loop in the @ISA
hierarchy. This is a crude check that bails out after 100 levels
of @ISA depth.
refcnt_dec: fd %d%s
refcnt: fd %d%s
refcnt_inc: fd %d%s
(P) Perl's I/O implementation failed an internal consistency check.
If you see this message, something is very wrong.
Reference found where even-sized list expected
(W misc) You gave a single reference where Perl was expecting a
list with an even number of elements (for assignment to a hash).
This usually means that you used the anon hash constructor when you
meant to use parens. In any case, a hash requires key/value pairs.
%hash = { one => 1, two => 2, }; # WRONG
%hash = [ qw/ an anon array / ]; # WRONG
%hash = ( one => 1, two => 2, ); # right
%hash = qw( one 1 two 2 ); # also fine
Reference is already weak
(W misc) You have attempted to weaken a reference that is already
weak. Doing so has no effect.
Reference to invalid group 0 in regex; marked by <-- HERE in m/%s/
(F) You used "\g0" or similar in a regular expression. You may
refer to capturing parentheses only with strictly positive integers
(normal backreferences) or with strictly negative integers
(relative backreferences). Using 0 does not make sense.
Reference to nonexistent group in regex; marked by <-- HERE in m/%s/
(F) You used something like "\7" in your regular expression, but
there are not at least seven sets of capturing parentheses in the
expression. If you wanted to have the character with ordinal 7
inserted into the regular expression, prepend zeroes to make it
three digits long: "\007"
The <-- HERE shows whereabouts in the regular expression the
problem was discovered.
Reference to nonexistent named group in regex; marked by <-- HERE in
m/%s/
(F) You used something like "\k'NAME'" or "\k<NAME>" in your
regular expression, but there is no corresponding named capturing
parentheses such as "(?'NAME'...)" or "(?<NAME>...)". Check if the
name has been spelled correctly both in the backreference and the
declaration.
The <-- HERE shows whereabouts in the regular expression the
problem was discovered.
Reference to nonexistent or unclosed group in regex; marked by <-- HERE
in m/%s/
(F) You used something like "\g{-7}" in your regular expression,
but there are not at least seven sets of closed capturing
parentheses in the expression before where the "\g{-7}" was
located.
The <-- HERE shows whereabouts in the regular expression the
problem was discovered.
regexp memory corruption
(P) The regular expression engine got confused by what the regular
expression compiler gave it.
Regexp modifier "/%c" may appear a maximum of twice
Regexp modifier "%c" may appear a maximum of twice in regex; marked by
<-- HERE in m/%s/
(F) The regular expression pattern had too many occurrences of the
specified modifier. Remove the extraneous ones.
Regexp modifier "%c" may not appear after the "-" in regex; marked by
<-- HERE in m/%s/
(F) Turning off the given modifier has the side effect of turning
on another one. Perl currently doesn't allow this. Reword the
regular expression to use the modifier you want to turn on (and
place it before the minus), instead of the one you want to turn
off.
Regexp modifier "/%c" may not appear twice
Regexp modifier "%c" may not appear twice in regex; marked by <-- HERE
in m/%s/
(F) The regular expression pattern had too many occurrences of the
specified modifier. Remove the extraneous ones.
Regexp modifiers "/%c" and "/%c" are mutually exclusive
Regexp modifiers "%c" and "%c" are mutually exclusive in regex; marked
by <-- HERE in m/%s/
(F) The regular expression pattern had more than one of these
mutually exclusive modifiers. Retain only the modifier that is
supposed to be there.
Regexp out of space in regex m/%s/
(P) A "can't happen" error, because safemalloc() should have caught
it earlier.
Repeated format line will never terminate (~~ and @#)
(F) Your format contains the ~~ repeat-until-blank sequence and a
numeric field that will never go blank so that the repetition never
terminates. You might use ^# instead. See perlform.
Replacement list is longer than search list
(W misc) You have used a replacement list that is longer than the
search list. So the additional elements in the replacement list
are meaningless.
'%s' resolved to '\o{%s}%d'
(W misc, regexp) You wrote something like "\08", or "\179" in a
double-quotish string. All but the last digit is treated as a
single character, specified in octal. The last digit is the next
character in the string. To tell Perl that this is indeed what you
want, you can use the "\o{ }" syntax, or use exactly three digits
to specify the octal for the character.
Reversed %s= operator
(W syntax) You wrote your assignment operator backwards. The =
must always come last, to avoid ambiguity with subsequent unary
operators.
rewinddir() attempted on invalid dirhandle %s
(W io) The dirhandle you tried to do a rewinddir() on is either
closed or not really a dirhandle. Check your control flow.
Scalars leaked: %d
(S internal) Something went wrong in Perl's internal bookkeeping of
scalars: not all scalar variables were deallocated by the time Perl
exited. What this usually indicates is a memory leak, which is of
course bad, especially if the Perl program is intended to be long-
running.
Scalar value @%s[%s] better written as $%s[%s]
(W syntax) You've used an array slice (indicated by @) to select a
single element of an array. Generally it's better to ask for a
scalar value (indicated by $). The difference is that $foo[&bar]
always behaves like a scalar, both when assigning to it and when
evaluating its argument, while @foo[&bar] behaves like a list when
you assign to it, and provides a list context to its subscript,
which can do weird things if you're expecting only one subscript.
On the other hand, if you were actually hoping to treat the array
element as a list, you need to look into how references work,
because Perl will not magically convert between scalars and lists
for you. See perlref.
Scalar value @%s{%s} better written as $%s{%s}
(W syntax) You've used a hash slice (indicated by @) to select a
single element of a hash. Generally it's better to ask for a
scalar value (indicated by $). The difference is that $foo{&bar}
always behaves like a scalar, both when assigning to it and when
evaluating its argument, while @foo{&bar} behaves like a list when
you assign to it, and provides a list context to its subscript,
which can do weird things if you're expecting only one subscript.
On the other hand, if you were actually hoping to treat the hash
element as a list, you need to look into how references work,
because Perl will not magically convert between scalars and lists
for you. See perlref.
Search pattern not terminated
(F) The lexer couldn't find the final delimiter of a // or m{}
construct. Remember that bracketing delimiters count nesting
level. Missing the leading "$" from a variable $m may cause this
error.
Note that since Perl 5.10.0 a // can also be the defined-or
construct, not just the empty search pattern. Therefore code
written in Perl 5.10.0 or later that uses the // as the defined-or
can be misparsed by pre-5.10.0 Perls as a non-terminated search
pattern.
Search pattern not terminated or ternary operator parsed as search
pattern
(F) The lexer couldn't find the final delimiter of a "?PATTERN?"
construct.
The question mark is also used as part of the ternary operator (as
in "foo ? 0 : 1") leading to some ambiguous constructions being
wrongly parsed. One way to disambiguate the parsing is to put
parentheses around the conditional expression, i.e. "(foo) ? 0 :
1".
seekdir() attempted on invalid dirhandle %s
(W io) The dirhandle you are doing a seekdir() on is either closed
or not really a dirhandle. Check your control flow.
%sseek() on unopened filehandle
(W unopened) You tried to use the seek() or sysseek() function on a
filehandle that was either never opened or has since been closed.
select not implemented
(F) This machine doesn't implement the select() system call.
Self-ties of arrays and hashes are not supported
(F) Self-ties are of arrays and hashes are not supported in the
current implementation.
Semicolon seems to be missing
(W semicolon) A nearby syntax error was probably caused by a
missing semicolon, or possibly some other missing operator, such as
a comma.
semi-panic: attempt to dup freed string
(S internal) The internal newSVsv() routine was called to duplicate
a scalar that had previously been marked as free.
sem%s not implemented
(F) You don't have System V semaphore IPC on your system.
send() on closed socket %s
(W closed) The socket you're sending to got itself closed sometime
before now. Check your control flow.
Sequence (? incomplete in regex; marked by <-- HERE in m/%s/
(F) A regular expression ended with an incomplete extension (?.
The <-- HERE shows whereabouts in the regular expression the
problem was discovered. See perlre.
Sequence (?%c...) not implemented in regex; marked by <-- HERE in m/%s/
(F) A proposed regular expression extension has the character
reserved but has not yet been written. The <-- HERE shows
whereabouts in the regular expression the problem was discovered.
See perlre.
Sequence (?%s...) not recognized in regex; marked by <-- HERE in m/%s/
(F) You used a regular expression extension that doesn't make
sense. The <-- HERE shows whereabouts in the regular expression
the problem was discovered. This may happen when using the
"(?^...)" construct to tell Perl to use the default regular
expression modifiers, and you redundantly specify a default
modifier. For other causes, see perlre.
Sequence (?#... not terminated in regex m/%s/
(F) A regular expression comment must be terminated by a closing
parenthesis. Embedded parentheses aren't allowed. See perlre.
Sequence (?&... not terminated in regex; marked by <-- HERE in m/%s/
(F) A named reference of the form "(?&...)" was missing the final
closing parenthesis after the name. The <-- HERE shows whereabouts
in the regular expression the problem was discovered.
Sequence (?%c... not terminated in regex; marked by <-- HERE in m/%s/
(F) A named group of the form "(?'...')" or "(?<...>)" was missing
the final closing quote or angle bracket. The <-- HERE shows
whereabouts in the regular expression the problem was discovered.
Sequence (?(%c... not terminated in regex; marked by <-- HERE in m/%s/
(F) A named reference of the form "(?('...')...)" or
"(?(<...>)...)" was missing the final closing quote or angle
bracket after the name. The <-- HERE shows whereabouts in the
regular expression the problem was discovered.
Sequence \%s... not terminated in regex; marked by <-- HERE in m/%s/
(F) The regular expression expects a mandatory argument following
the escape sequence and this has been omitted or incorrectly
written.
Sequence (?{...}) not terminated with ')'
(F) The end of the perl code contained within the {...} must be
followed immediately by a ')'.
Sequence ?P=... not terminated in regex; marked by <-- HERE in m/%s/
(F) A named reference of the form "(?P=...)" was missing the final
closing parenthesis after the name. The <-- HERE shows whereabouts
in the regular expression the problem was discovered.
Sequence (?R) not terminated in regex m/%s/
(F) An "(?R)" or "(?0)" sequence in a regular expression was
missing the final parenthesis.
Server error (a.k.a. "500 Server error")
(A) This is the error message generally seen in a browser window
when trying to run a CGI program (including SSI) over the web. The
actual error text varies widely from server to server. The most
frequently-seen variants are "500 Server error", "Method
(something) not permitted", "Document contains no data", "Premature
end of script headers", and "Did not produce a valid header".
This is a CGI error, not a Perl error.
You need to make sure your script is executable, is accessible by
the user CGI is running the script under (which is probably not the
user account you tested it under), does not rely on any environment
variables (like PATH) from the user it isn't running under, and
isn't in a location where the CGI server can't find it, basically,
more or less. Please see the following for more information:
http://www.perl.org/CGI_MetaFAQ.html
http://www.htmlhelp.org/faq/cgifaq.html
http://www.w3.org/Security/Faq/
You should also look at perlfaq9.
setegid() not implemented
(F) You tried to assign to $), and your operating system doesn't
support the setegid() system call (or equivalent), or at least
Configure didn't think so.
seteuid() not implemented
(F) You tried to assign to $>, and your operating system doesn't
support the seteuid() system call (or equivalent), or at least
Configure didn't think so.
setpgrp can't take arguments
(F) Your system has the setpgrp() from BSD 4.2, which takes no
arguments, unlike POSIX setpgid(), which takes a process ID and
process group ID.
setrgid() not implemented
(F) You tried to assign to $(, and your operating system doesn't
support the setrgid() system call (or equivalent), or at least
Configure didn't think so.
setruid() not implemented
(F) You tried to assign to $<, and your operating system doesn't
support the setruid() system call (or equivalent), or at least
Configure didn't think so.
setsockopt() on closed socket %s
(W closed) You tried to set a socket option on a closed socket.
Did you forget to check the return value of your socket() call?
See "setsockopt" in perlfunc.
Setting $/ to a reference to %s as a form of slurp is deprecated,
treating as undef
(W deprecated) You assigned a reference to a scalar to $/ where the
referenced item is not a positive integer. In older perls this
appeared to work the same as setting it to "undef" but was in fact
internally different, less efficient and with very bad luck could
have resulted in your file being split by a stringified form of the
reference.
In Perl 5.20.0 this was changed so that it would be exactly the
same as setting $/ to undef, with the exception that this warning
would be thrown.
You are recommended to change your code to set $/ to "undef"
explicitly if you wish to slurp the file. In future versions of
Perl assigning a reference to will throw a fatal error.
Setting $/ to %s reference is forbidden
(F) You tried to assign a reference to a non integer to $/. In
older Perls this would have behaved similarly to setting it to a
reference to a positive integer, where the integer was the address
of the reference. As of Perl 5.20.0 this is a fatal error, to
allow future versions of Perl to use non-integer refs for more
interesting purposes.
shift on reference is experimental
(S experimental::autoderef) "shift" with a scalar argument is
experimental and may change or be removed in a future Perl version.
If you want to take the risk of using this feature, simply disable
this warning:
no warnings "experimental::autoderef";
shm%s not implemented
(F) You don't have System V shared memory IPC on your system.
!=~ should be !~
(W syntax) The non-matching operator is !~, not !=~. !=~ will be
interpreted as the != (numeric not equal) and ~ (1's complement)
operators: probably not what you intended.
<> should be quotes
(F) You wrote "require <file>" when you should have written
"require 'file'".
/%s/ should probably be written as "%s"
(W syntax) You have used a pattern where Perl expected to find a
string, as in the first argument to "join". Perl will treat the
true or false result of matching the pattern against $_ as the
string, which is probably not what you had in mind.
shutdown() on closed socket %s
(W closed) You tried to do a shutdown on a closed socket. Seems a
bit superfluous.
SIG%s handler "%s" not defined
(W signal) The signal handler named in %SIG doesn't, in fact,
exist. Perhaps you put it into the wrong package?
Slab leaked from cv %p
(S) If you see this message, then something is seriously wrong with
the internal bookkeeping of op trees. An op tree needed to be
freed after a compilation error, but could not be found, so it was
leaked instead.
sleep(%u) too large
(W overflow) You called "sleep" with a number that was larger than
it can reliably handle and "sleep" probably slept for less time
than requested.
Slurpy parameter not last
(F) In a subroutine signature, you put something after a slurpy
(array or hash) parameter. The slurpy parameter takes all the
available arguments, so there can't be any left to fill later
parameters.
Smart matching a non-overloaded object breaks encapsulation
(F) You should not use the "~~" operator on an object that does not
overload it: Perl refuses to use the object's underlying structure
for the smart match.
Smartmatch is experimental
(S experimental::smartmatch) This warning is emitted if you use the
smartmatch ("~~") operator. This is currently an experimental
feature, and its details are subject to change in future releases
of Perl. Particularly, its current behavior is noticed for being
unnecessarily complex and unintuitive, and is very likely to be
overhauled.
sort is now a reserved word
(F) An ancient error message that almost nobody ever runs into
anymore. But before sort was a keyword, people sometimes used it
as a filehandle.
Sort subroutine didn't return single value
(F) A sort comparison subroutine written in XS must return exactly
one item. See "sort" in perlfunc.
Source filters apply only to byte streams
(F) You tried to activate a source filter (usually by loading a
source filter module) within a string passed to "eval". This is
not permitted under the "unicode_eval" feature. Consider using
"evalbytes" instead. See feature.
splice() offset past end of array
(W misc) You attempted to specify an offset that was past the end
of the array passed to splice(). Splicing will instead commence at
the end of the array, rather than past it. If this isn't what you
want, try explicitly pre-extending the array by assigning $#array =
$offset. See "splice" in perlfunc.
splice on reference is experimental
(S experimental::autoderef) "splice" with a scalar argument is
experimental and may change or be removed in a future Perl version.
If you want to take the risk of using this feature, simply disable
this warning:
no warnings "experimental::autoderef";
Split loop
(P) The split was looping infinitely. (Obviously, a split
shouldn't iterate more times than there are characters of input,
which is what happened.) See "split" in perlfunc.
Statement unlikely to be reached
(W exec) You did an exec() with some statement after it other than
a die(). This is almost always an error, because exec() never
returns unless there was a failure. You probably wanted to use
system() instead, which does return. To suppress this warning, put
the exec() in a block by itself.
"state %s" used in sort comparison
(W syntax) The package variables $a and $b are used for sort
comparisons. You used $a or $b in as an operand to the "<=>" or
"cmp" operator inside a sort comparison block, and the variable had
earlier been declared as a lexical variable. Either qualify the
sort variable with the package name, or rename the lexical
variable.
"state" variable %s can't be in a package
(F) Lexically scoped variables aren't in a package, so it doesn't
make sense to try to declare one with a package qualifier on the
front. Use local() if you want to localize a package variable.
stat() on unopened filehandle %s
(W unopened) You tried to use the stat() function on a filehandle
that was either never opened or has since been closed.
Strings with code points over 0xFF may not be mapped into in-memory
file handles
(W utf8) You tried to open a reference to a scalar for read or
append where the scalar contained code points over 0xFF. In-memory
files model on-disk files and can only contain bytes.
Stub found while resolving method "%s" overloading "%s" in package "%s"
(P) Overloading resolution over @ISA tree may be broken by
importation stubs. Stubs should never be implicitly created, but
explicit calls to "can" may break this.
Subroutine "&%s" is not available
(W closure) During compilation, an inner named subroutine or eval
is attempting to capture an outer lexical subroutine that is not
currently available. This can happen for one of two reasons.
First, the lexical subroutine may be declared in an outer anonymous
subroutine that has not yet been created. (Remember that named
subs are created at compile time, while anonymous subs are created
at run-time.) For example,
sub { my sub a {...} sub f { \&a } }
At the time that f is created, it can't capture the current "a"
sub, since the anonymous subroutine hasn't been created yet.
Conversely, the following won't give a warning since the anonymous
subroutine has by now been created and is live:
sub { my sub a {...} eval 'sub f { \&a }' }->();
The second situation is caused by an eval accessing a lexical
subroutine that has gone out of scope, for example,
sub f {
my sub a {...}
sub { eval '\&a' }
}
f()->();
Here, when the '\&a' in the eval is being compiled, f() is not
currently being executed, so its &a is not available for capture.
"%s" subroutine &%s masks earlier declaration in same %s
(W misc) A "my" or "state" subroutine has been redeclared in the
current scope or statement, effectively eliminating all access to
the previous instance. This is almost always a typographical
error. Note that the earlier subroutine will still exist until the
end of the scope or until all closure references to it are
destroyed.
Subroutine %s redefined
(W redefine) You redefined a subroutine. To suppress this warning,
say
{
no warnings 'redefine';
eval "sub name { ... }";
}
Substitution loop
(P) The substitution was looping infinitely. (Obviously, a
substitution shouldn't iterate more times than there are characters
of input, which is what happened.) See the discussion of
substitution in "Regexp Quote-Like Operators" in perlop.
Substitution pattern not terminated
(F) The lexer couldn't find the interior delimiter of an s/// or
s{}{} construct. Remember that bracketing delimiters count nesting
level. Missing the leading "$" from variable $s may cause this
error.
Substitution replacement not terminated
(F) The lexer couldn't find the final delimiter of an s/// or s{}{}
construct. Remember that bracketing delimiters count nesting
level. Missing the leading "$" from variable $s may cause this
error.
substr outside of string
(W substr)(F) You tried to reference a substr() that pointed
outside of a string. That is, the absolute value of the offset was
larger than the length of the string. See "substr" in perlfunc.
This warning is fatal if substr is used in an lvalue context (as
the left hand side of an assignment or as a subroutine argument for
example).
sv_upgrade from type %d down to type %d
(P) Perl tried to force the upgrade of an SV to a type which was
actually inferior to its current type.
SWASHNEW didn't return an HV ref
(P) Something went wrong internally when Perl was trying to look up
Unicode characters.
Switch (?(condition)... contains too many branches in regex; marked by
<-- HERE in m/%s/
(F) A (?(condition)if-clause|else-clause) construct can have at
most two branches (the if-clause and the else-clause). If you want
one or both to contain alternation, such as using
"this|that|other", enclose it in clustering parentheses:
(?(condition)(?:this|that|other)|else-clause)
The <-- HERE shows whereabouts in the regular expression the
problem was discovered. See perlre.
Switch condition not recognized in regex; marked by <-- HERE in m/%s/
(F) The condition part of a (?(condition)if-clause|else-clause)
construct is not known. The condition must be one of the
following:
(1) (2) ... true if 1st, 2nd, etc., capture matched
(<NAME>) ('NAME') true if named capture matched
(?=...) (?<=...) true if subpattern matches
(?!...) (?<!...) true if subpattern fails to match
(?{ CODE }) true if code returns a true value
(R) true if evaluating inside recursion
(R1) (R2) ... true if directly inside capture group 1, 2, etc.
(R&NAME) true if directly inside named capture
(DEFINE) always false; for defining named subpatterns
The <-- HERE shows whereabouts in the regular expression the
problem was discovered. See perlre.
switching effective %s is not implemented
(F) While under the "use filetest" pragma, we cannot switch the
real and effective uids or gids.
syntax error
(F) Probably means you had a syntax error. Common reasons include:
A keyword is misspelled.
A semicolon is missing.
A comma is missing.
An opening or closing parenthesis is missing.
An opening or closing brace is missing.
A closing quote is missing.
Often there will be another error message associated with the
syntax error giving more information. (Sometimes it helps to turn
on -w.) The error message itself often tells you where it was in
the line when it decided to give up. Sometimes the actual error is
several tokens before this, because Perl is good at understanding
random input. Occasionally the line number may be misleading, and
once in a blue moon the only way to figure out what's triggering
the error is to call "perl -c" repeatedly, chopping away half the
program each time to see if the error went away. Sort of the
cybernetic version of 20 questions.
syntax error at line %d: '%s' unexpected
(A) You've accidentally run your script through the Bourne shell
instead of Perl. Check the #! line, or manually feed your script
into Perl yourself.
syntax error in file %s at line %d, next 2 tokens "%s"
(F) This error is likely to occur if you run a perl5 script through
a perl4 interpreter, especially if the next 2 tokens are "use
strict" or "my $var" or "our $var".
Syntax error in (?[...]) in regex m/%s/
(F) Perl could not figure out what you meant inside this construct;
this notifies you that it is giving up trying.
%s syntax OK
(F) The final summary message when a "perl -c" succeeds.
sysread() on closed filehandle %s
(W closed) You tried to read from a closed filehandle.
sysread() on unopened filehandle %s
(W unopened) You tried to read from a filehandle that was never
opened.
System V %s is not implemented on this machine
(F) You tried to do something with a function beginning with "sem",
"shm", or "msg" but that System V IPC is not implemented in your
machine. In some machines the functionality can exist but be
unconfigured. Consult your system support.
syswrite() on closed filehandle %s
(W closed) The filehandle you're writing to got itself closed
sometime before now. Check your control flow.
"-T" and "-B" not implemented on filehandles
(F) Perl can't peek at the stdio buffer of filehandles when it
doesn't know about your kind of stdio. You'll have to use a
filename instead.
Target of goto is too deeply nested
(F) You tried to use "goto" to reach a label that was too deeply
nested for Perl to reach. Perl is doing you a favor by refusing.
telldir() attempted on invalid dirhandle %s
(W io) The dirhandle you tried to telldir() is either closed or not
really a dirhandle. Check your control flow.
tell() on unopened filehandle
(W unopened) You tried to use the tell() function on a filehandle
that was either never opened or has since been closed.
That use of $[ is unsupported
(F) Assignment to $[ is now strictly circumscribed, and interpreted
as a compiler directive. You may say only one of
$[ = 0;
$[ = 1;
...
local $[ = 0;
local $[ = 1;
...
This is to prevent the problem of one module changing the array
base out from under another module inadvertently. See "$[" in
perlvar and arybase.
The crypt() function is unimplemented due to excessive paranoia.
(F) Configure couldn't find the crypt() function on your machine,
probably because your vendor didn't supply it, probably because
they think the U.S. Government thinks it's a secret, or at least
that they will continue to pretend that it is. And if you quote me
on that, I will deny it.
The %s function is unimplemented
(F) The function indicated isn't implemented on this architecture,
according to the probings of Configure.
The lexical_subs feature is experimental
(S experimental::lexical_subs) This warning is emitted if you
declare a sub with "my" or "state". Simply suppress the warning if
you want to use the feature, but know that in doing so you are
taking the risk of using an experimental feature which may change
or be removed in a future Perl version:
no warnings "experimental::lexical_subs";
use feature "lexical_subs";
my sub foo { ... }
The regex_sets feature is experimental
(S experimental::regex_sets) This warning is emitted if you use the
syntax "(?[ ])" in a regular expression. The details of this
feature are subject to change. if you want to use it, but know
that in doing so you are taking the risk of using an experimental
feature which may change in a future Perl version, you can do this
to silence the warning:
no warnings "experimental::regex_sets";
The signatures feature is experimental
(S experimental::signatures) This warning is emitted if you unwrap
a subroutine's arguments using a signature. Simply suppress the
warning if you want to use the feature, but know that in doing so
you are taking the risk of using an experimental feature which may
change or be removed in a future Perl version:
no warnings "experimental::signatures";
use feature "signatures";
sub foo ($left, $right) { ... }
The stat preceding %s wasn't an lstat
(F) It makes no sense to test the current stat buffer for symbolic
linkhood if the last stat that wrote to the stat buffer already
went past the symlink to get to the real file. Use an actual
filename instead.
The 'unique' attribute may only be applied to 'our' variables
(F) This attribute was never supported on "my" or "sub"
declarations.
This Perl can't reset CRTL environ elements (%s)
This Perl can't set CRTL environ elements (%s=%s)
(W internal) Warnings peculiar to VMS. You tried to change or
delete an element of the CRTL's internal environ array, but your
copy of Perl wasn't built with a CRTL that contained the setenv()
function. You'll need to rebuild Perl with a CRTL that does, or
redefine PERL_ENV_TABLES (see perlvms) so that the environ array
isn't the target of the change to %ENV which produced the warning.
This Perl has not been built with support for randomized hash key
traversal but something called Perl_hv_rand_set().
(F) Something has attempted to use an internal API call which
depends on Perl being compiled with the default support for
randomized hash key traversal, but this Perl has been compiled
without it. You should report this warning to the relevant
upstream party, or recompile perl with default options.
times not implemented
(F) Your version of the C library apparently doesn't do times(). I
suspect you're not running on Unix.
"-T" is on the #! line, it must also be used on the command line
(X) The #! line (or local equivalent) in a Perl script contains the
-T option (or the -t option), but Perl was not invoked with -T in
its command line. This is an error because, by the time Perl
discovers a -T in a script, it's too late to properly taint
everything from the environment. So Perl gives up.
If the Perl script is being executed as a command using the #!
mechanism (or its local equivalent), this error can usually be
fixed by editing the #! line so that the -%c option is a part of
Perl's first argument: e.g. change "perl -n -%c" to "perl -%c -n".
If the Perl script is being executed as "perl scriptname", then the
-%c option must appear on the command line: "perl -%c scriptname".
To%s: illegal mapping '%s'
(F) You tried to define a customized To-mapping for lc(), lcfirst,
uc(), or ucfirst() (or their string-inlined versions), but you
specified an illegal mapping. See "User-Defined Character
Properties" in perlunicode.
Too deeply nested ()-groups
(F) Your template contains ()-groups with a ridiculously deep
nesting level.
Too few args to syscall
(F) There has to be at least one argument to syscall() to specify
the system call to call, silly dilly.
Too few arguments for subroutine
(F) A subroutine using a signature received fewer arguments than
required by the signature. The caller of the subroutine is
presumably at fault. Inconveniently, this error will be reported
at the location of the subroutine, not that of the caller.
Too late for "-%s" option
(X) The #! line (or local equivalent) in a Perl script contains the
-M, -m or -C option.
In the case of -M and -m, this is an error because those options
are not intended for use inside scripts. Use the "use" pragma
instead.
The -C option only works if it is specified on the command line as
well (with the same sequence of letters or numbers following).
Either specify this option on the command line, or, if your system
supports it, make your script executable and run it directly
instead of passing it to perl.
Too late to run %s block
(W void) A CHECK or INIT block is being defined during run time
proper, when the opportunity to run them has already passed.
Perhaps you are loading a file with "require" or "do" when you
should be using "use" instead. Or perhaps you should put the
"require" or "do" inside a BEGIN block.
Too many args to syscall
(F) Perl supports a maximum of only 14 args to syscall().
Too many arguments for %s
(F) The function requires fewer arguments than you specified.
Too many arguments for subroutine
(F) A subroutine using a signature received more arguments than
required by the signature. The caller of the subroutine is
presumably at fault. Inconveniently, this error will be reported
at the location of the subroutine, not that of the caller.
Too many )'s
(A) You've accidentally run your script through csh instead of
Perl. Check the #! line, or manually feed your script into Perl
yourself.
Too many ('s
(A) You've accidentally run your script through csh instead of
Perl. Check the #! line, or manually feed your script into Perl
yourself.
Trailing \ in regex m/%s/
(F) The regular expression ends with an unbackslashed backslash.
Backslash it. See perlre.
Trailing white-space in a charnames alias definition is deprecated
(D deprecated) You defined a character name which ended in a space
character. Remove the trailing space(s). Usually these names are
defined in the ":alias" import argument to "use charnames", but
they could be defined by a translator installed into
$^H{charnames}. See "CUSTOM ALIASES" in charnames.
Transliteration pattern not terminated
(F) The lexer couldn't find the interior delimiter of a tr/// or
tr[][] or y/// or y[][] construct. Missing the leading "$" from
variables $tr or $y may cause this error.
Transliteration replacement not terminated
(F) The lexer couldn't find the final delimiter of a tr///, tr[][],
y/// or y[][] construct.
'%s' trapped by operation mask
(F) You tried to use an operator from a Safe compartment in which
it's disallowed. See Safe.
truncate not implemented
(F) Your machine doesn't implement a file truncation mechanism that
Configure knows about.
Type of arg %d to &CORE::%s must be %s
(F) The subroutine in question in the CORE package requires its
argument to be a hard reference to data of the specified type.
Overloading is ignored, so a reference to an object that is not the
specified type, but nonetheless has overloading to handle it, will
still not be accepted.
Type of arg %d to %s must be %s (not %s)
(F) This function requires the argument in that position to be of a
certain type. Arrays must be @NAME or "@{EXPR}". Hashes must be
%NAME or "%{EXPR}". No implicit dereferencing is allowed--use the
{EXPR} forms as an explicit dereference. See perlref.
Type of argument to %s must be unblessed hashref or arrayref
(F) You called "keys", "values" or "each" with a scalar argument
that was not a reference to an unblessed hash or array.
umask not implemented
(F) Your machine doesn't implement the umask function and you tried
to use it to restrict permissions for yourself (EXPR & 0700).
Unbalanced context: %d more PUSHes than POPs
(S internal) The exit code detected an internal inconsistency in
how many execution contexts were entered and left.
Unbalanced saves: %d more saves than restores
(S internal) The exit code detected an internal inconsistency in
how many values were temporarily localized.
Unbalanced scopes: %d more ENTERs than LEAVEs
(S internal) The exit code detected an internal inconsistency in
how many blocks were entered and left.
Unbalanced string table refcount: (%d) for "%s"
(S internal) On exit, Perl found some strings remaining in the
shared string table used for copy on write and for hash keys. The
entries should have been freed, so this indicates a bug somewhere.
Unbalanced tmps: %d more allocs than frees
(S internal) The exit code detected an internal inconsistency in
how many mortal scalars were allocated and freed.
Undefined format "%s" called
(F) The format indicated doesn't seem to exist. Perhaps it's
really in another package? See perlform.
Undefined sort subroutine "%s" called
(F) The sort comparison routine specified doesn't seem to exist.
Perhaps it's in a different package? See "sort" in perlfunc.
Undefined subroutine &%s called
(F) The subroutine indicated hasn't been defined, or if it was, it
has since been undefined.
Undefined subroutine called
(F) The anonymous subroutine you're trying to call hasn't been
defined, or if it was, it has since been undefined.
Undefined subroutine in sort
(F) The sort comparison routine specified is declared but doesn't
seem to have been defined yet. See "sort" in perlfunc.
Undefined top format "%s" called
(F) The format indicated doesn't seem to exist. Perhaps it's
really in another package? See perlform.
Undefined value assigned to typeglob
(W misc) An undefined value was assigned to a typeglob, a la "*foo
= undef". This does nothing. It's possible that you really mean
"undef *foo".
%s: Undefined variable
(A) You've accidentally run your script through csh instead of
Perl. Check the #! line, or manually feed your script into Perl
yourself.
unexec of %s into %s failed!
(F) The unexec() routine failed for some reason. See your local
FSF representative, who probably put it there in the first place.
Unexpected binary operator '%c' with no preceding operand in regex;
marked by <-- HERE in m/%s/
(F) You had something like this:
(?[ | \p{Digit} ])
where the "|" is a binary operator with an operand on the right,
but no operand on the left.
Unexpected character in regex; marked by <-- HERE in m/%s/
(F) You had something like this:
(?[ z ])
Within "(?[ ])", no literal characters are allowed unless they are
within an inner pair of square brackets, like
(?[ [ z ] ])
Another possibility is that you forgot a backslash. Perl isn't
smart enough to figure out what you really meant.
Unexpected constant lvalue entersub entry via type/targ %d:%d
(P) When compiling a subroutine call in lvalue context, Perl failed
an internal consistency check. It encountered a malformed op tree.
Unexpected exit %u
(S) exit() was called or the script otherwise finished gracefully
when "PERL_EXIT_WARN" was set in "PL_exit_flags".
Unexpected exit failure %d
(S) An uncaught die() was called when "PERL_EXIT_WARN" was set in
"PL_exit_flags".
Unexpected ')' in regex; marked by <-- HERE in m/%s/
(F) You had something like this:
(?[ ( \p{Digit} + ) ])
The ")" is out-of-place. Something apparently was supposed to be
combined with the digits, or the "+" shouldn't be there, or
something like that. Perl can't figure out what was intended.
Unexpected '(' with no preceding operator in regex; marked by <-- HERE
in m/%s/
(F) You had something like this:
(?[ \p{Digit} ( \p{Lao} + \p{Thai} ) ])
There should be an operator before the "(", as there's no
indication as to how the digits are to be combined with the
characters in the Lao and Thai scripts.
Unicode non-character U+%X is illegal for open interchange
(S nonchar) Certain codepoints, such as U+FFFE and U+FFFF, are
defined by the Unicode standard to be non-characters. Those are
legal codepoints, but are reserved for internal use; so,
applications shouldn't attempt to exchange them. An application
may not be expecting any of these characters at all, and receiving
them may lead to bugs. If you know what you are doing you can turn
off this warning by "no warnings 'nonchar';".
This is not really a "serious" error, but it is supposed to be
raised by default even if warnings are not enabled, and currently
the only way to do that in Perl is to mark it as serious.
Unicode surrogate U+%X is illegal in UTF-8
(S surrogate) You had a UTF-16 surrogate in a context where they
are not considered acceptable. These code points, between U+D800
and U+DFFF (inclusive), are used by Unicode only for UTF-16.
However, Perl internally allows all unsigned integer code points
(up to the size limit available on your platform), including
surrogates. But these can cause problems when being input or
output, which is likely where this message came from. If you
really really know what you are doing you can turn off this warning
by "no warnings 'surrogate';".
Unknown charname '%s'
(F) The name you used inside "\N{}" is unknown to Perl. Check the
spelling. You can say "use charnames ":loose"" to not have to be
so precise about spaces, hyphens, and capitalization on standard
Unicode names. (Any custom aliases that have been created must be
specified exactly, regardless of whether ":loose" is used or not.)
This error may also happen if the "\N{}" is not in the scope of the
corresponding "use charnames".
Unknown error
(P) Perl was about to print an error message in $@, but the $@
variable did not exist, even after an attempt to create it.
Unknown open() mode '%s'
(F) The second argument of 3-argument open() is not among the list
of valid modes: "<", ">", ">>", "+<", "+>", "+>>", "-|", "|-",
"<&", ">&".
Unknown PerlIO layer "%s"
(W layer) An attempt was made to push an unknown layer onto the
Perl I/O system. (Layers take care of transforming data between
external and internal representations.) Note that some layers,
such as "mmap", are not supported in all environments. If your
program didn't explicitly request the failing operation, it may be
the result of the value of the environment variable PERLIO.
Unknown process %x sent message to prime_env_iter: %s
(P) An error peculiar to VMS. Perl was reading values for %ENV
before iterating over it, and someone else stuck a message in the
stream of data Perl expected. Someone's very confused, or perhaps
trying to subvert Perl's population of %ENV for nefarious purposes.
Unknown regex modifier "%s"
(F) Alphanumerics immediately following the closing delimiter of a
regular expression pattern are interpreted by Perl as modifier
flags for the regex. One of the ones you specified is invalid.
One way this can happen is if you didn't put in white space between
the end of the regex and a following alphanumeric operator:
if ($a =~ /foo/and $bar == 3) { ... }
The "a" is a valid modifier flag, but the "n" is not, and raises
this error. Likely what was meant instead was:
if ($a =~ /foo/ and $bar == 3) { ... }
Unknown "re" subpragma '%s' (known ones are: %s)
(W) You tried to use an unknown subpragma of the "re" pragma.
Unknown switch condition (?(...)) in regex; marked by <-- HERE in m/%s/
(F) The condition part of a (?(condition)if-clause|else-clause)
construct is not known. The condition must be one of the
following:
(1) (2) ... true if 1st, 2nd, etc., capture matched
(<NAME>) ('NAME') true if named capture matched
(?=...) (?<=...) true if subpattern matches
(?!...) (?<!...) true if subpattern fails to match
(?{ CODE }) true if code returns a true value
(R) true if evaluating inside recursion
(R1) (R2) ... true if directly inside capture group 1, 2, etc.
(R&NAME) true if directly inside named capture
(DEFINE) always false; for defining named subpatterns
The <-- HERE shows whereabouts in the regular expression the
problem was discovered. See perlre.
Unknown Unicode option letter '%c'
(F) You specified an unknown Unicode option. See perlrun
documentation of the "-C" switch for the list of known options.
Unknown Unicode option value %d
(F) You specified an unknown Unicode option. See perlrun
documentation of the "-C" switch for the list of known options.
Unknown verb pattern '%s' in regex; marked by <-- HERE in m/%s/
(F) You either made a typo or have incorrectly put a "*" quantifier
after an open brace in your pattern. Check the pattern and review
perlre for details on legal verb patterns.
Unknown warnings category '%s'
(F) An error issued by the "warnings" pragma. You specified a
warnings category that is unknown to perl at this point.
Note that if you want to enable a warnings category registered by a
module (e.g. "use warnings 'File::Find'"), you must have loaded
this module first.
Unmatched '[' in POSIX class in regex; marked by <-- HERE in m/%s/
(F) You had something like this:
(?[ [:digit: ])
That should be written:
(?[ [:digit:] ])
Unmatched '%c' in POSIX class in regex; marked by <-- HERE in m/%s/
(F) You had something like this:
(?[ [:alnum] ])
There should be a second ":", like this:
(?[ [:alnum:] ])
Unmatched [ in regex; marked by <-- HERE in m/%s/
(F) The brackets around a character class must match. If you wish
to include a closing bracket in a character class, backslash it or
put it first. The <-- HERE shows whereabouts in the regular
expression the problem was discovered. See perlre.
Unmatched ( in regex; marked by <-- HERE in m/%s/
Unmatched ) in regex; marked by <-- HERE in m/%s/
(F) Unbackslashed parentheses must always be balanced in regular
expressions. If you're a vi user, the % key is valuable for
finding the matching parenthesis. The <-- HERE shows whereabouts
in the regular expression the problem was discovered. See perlre.
Unmatched right %s bracket
(F) The lexer counted more closing curly or square brackets than
opening ones, so you're probably missing a matching opening
bracket. As a general rule, you'll find the missing one (so to
speak) near the place you were last editing.
Unquoted string "%s" may clash with future reserved word
(W reserved) You used a bareword that might someday be claimed as a
reserved word. It's best to put such a word in quotes, or
capitalize it somehow, or insert an underbar into it. You might
also declare it as a subroutine.
Unrecognized character %s; marked by <-- HERE after %s near column %d
(F) The Perl parser has no idea what to do with the specified
character in your Perl script (or eval) near the specified column.
Perhaps you tried to run a compressed script, a binary program, or
a directory as a Perl program.
Unrecognized escape \%c in character class in regex; marked by <-- HERE
in m/%s/
(F) You used a backslash-character combination which is not
recognized by Perl inside character classes. This is a fatal error
when the character class is used within "(?[ ])".
Unrecognized escape \%c in character class passed through in regex;
marked by <-- HERE in m/%s/
(W regexp) You used a backslash-character combination which is not
recognized by Perl inside character classes. The character was
understood literally, but this may change in a future version of
Perl. The <-- HERE shows whereabouts in the regular expression the
escape was discovered.
Unrecognized escape \%c passed through
(W misc) You used a backslash-character combination which is not
recognized by Perl. The character was understood literally, but
this may change in a future version of Perl.
Unrecognized escape \%s passed through in regex; marked by <-- HERE in
m/%s/
(W regexp) You used a backslash-character combination which is not
recognized by Perl. The character(s) were understood literally,
but this may change in a future version of Perl. The <-- HERE
shows whereabouts in the regular expression the escape was
discovered.
Unrecognized signal name "%s"
(F) You specified a signal name to the kill() function that was not
recognized. Say "kill -l" in your shell to see the valid signal
names on your system.
Unrecognized switch: -%s (-h will show valid options)
(F) You specified an illegal option to Perl. Don't do that. (If
you think you didn't do that, check the #! line to see if it's
supplying the bad switch on your behalf.)
unshift on reference is experimental
(S experimental::autoderef) "unshift" with a scalar argument is
experimental and may change or be removed in a future Perl version.
If you want to take the risk of using this feature, simply disable
this warning:
no warnings "experimental::autoderef";
Unsuccessful %s on filename containing newline
(W newline) A file operation was attempted on a filename, and that
operation failed, PROBABLY because the filename contained a
newline, PROBABLY because you forgot to chomp() it off. See
"chomp" in perlfunc.
Unsupported directory function "%s" called
(F) Your machine doesn't support opendir() and readdir().
Unsupported function %s
(F) This machine doesn't implement the indicated function,
apparently. At least, Configure doesn't think so.
Unsupported function fork
(F) Your version of executable does not support forking.
Note that under some systems, like OS/2, there may be different
flavors of Perl executables, some of which may support fork, some
not. Try changing the name you call Perl by to "perl_", "perl__",
and so on.
Unsupported script encoding %s
(F) Your program file begins with a Unicode Byte Order Mark (BOM)
which declares it to be in a Unicode encoding that Perl cannot
read.
Unsupported socket function "%s" called
(F) Your machine doesn't support the Berkeley socket mechanism, or
at least that's what Configure thought.
Unterminated attribute list
(F) The lexer found something other than a simple identifier at the
start of an attribute, and it wasn't a semicolon or the start of a
block. Perhaps you terminated the parameter list of the previous
attribute too soon. See attributes.
Unterminated attribute parameter in attribute list
(F) The lexer saw an opening (left) parenthesis character while
parsing an attribute list, but the matching closing (right)
parenthesis character was not found. You may need to add (or
remove) a backslash character to get your parentheses to balance.
See attributes.
Unterminated compressed integer
(F) An argument to unpack("w",...) was incompatible with the BER
compressed integer format and could not be converted to an integer.
See "pack" in perlfunc.
Unterminated delimiter for here document
(F) This message occurs when a here document label has an initial
quotation mark but the final quotation mark is missing. Perhaps
you wrote:
<<"foo
instead of:
<<"foo"
Unterminated \g... pattern in regex; marked by <-- HERE in m/%s/
Unterminated \g{...} pattern in regex; marked by <-- HERE in m/%s/
(F) In a regular expression, you had a "\g" that wasn't followed by
a proper group reference. In the case of "\g{", the closing brace
is missing; otherwise the "\g" must be followed by an integer. Fix
the pattern and retry.
Unterminated <> operator
(F) The lexer saw a left angle bracket in a place where it was
expecting a term, so it's looking for the corresponding right angle
bracket, and not finding it. Chances are you left some needed
parentheses out earlier in the line, and you really meant a "less
than".
Unterminated verb pattern argument in regex; marked by <-- HERE in
m/%s/
(F) You used a pattern of the form "(*VERB:ARG)" but did not
terminate the pattern with a ")". Fix the pattern and retry.
Unterminated verb pattern in regex; marked by <-- HERE in m/%s/
(F) You used a pattern of the form "(*VERB)" but did not terminate
the pattern with a ")". Fix the pattern and retry.
untie attempted while %d inner references still exist
(W untie) A copy of the object returned from "tie" (or "tied") was
still valid when "untie" was called.
Usage: POSIX::%s(%s)
(F) You called a POSIX function with incorrect arguments. See
"FUNCTIONS" in POSIX for more information.
Usage: Win32::%s(%s)
(F) You called a Win32 function with incorrect arguments. See
Win32 for more information.
$[ used in %s (did you mean $] ?)
(W syntax) You used $[ in a comparison, such as:
if ($[ > 5.006) {
...
}
You probably meant to use $] instead. $[ is the base for indexing
arrays. $] is the Perl version number in decimal.
Use "%s" instead of "%s"
(F) The second listed construct is no longer legal. Use the first
one instead.
Useless assignment to a temporary
(W misc) You assigned to an lvalue subroutine, but what the
subroutine returned was a temporary scalar about to be discarded,
so the assignment had no effect.
Useless (?-%s) - don't use /%s modifier in regex; marked by <-- HERE in
m/%s/
(W regexp) You have used an internal modifier such as (?-o) that
has no meaning unless removed from the entire regexp:
if ($string =~ /(?-o)$pattern/o) { ... }
must be written as
if ($string =~ /$pattern/) { ... }
The <-- HERE shows whereabouts in the regular expression the
problem was discovered. See perlre.
Useless localization of %s
(W syntax) The localization of lvalues such as "local($x=10)" is
legal, but in fact the local() currently has no effect. This may
change at some point in the future, but in the meantime such code
is discouraged.
Useless (?%s) - use /%s modifier in regex; marked by <-- HERE in m/%s/
(W regexp) You have used an internal modifier such as (?o) that has
no meaning unless applied to the entire regexp:
if ($string =~ /(?o)$pattern/) { ... }
must be written as
if ($string =~ /$pattern/o) { ... }
The <-- HERE shows whereabouts in the regular expression the
problem was discovered. See perlre.
Useless use of /d modifier in transliteration operator
(W misc) You have used the /d modifier where the searchlist has the
same length as the replacelist. See perlop for more information
about the /d modifier.
Useless use of '\'; doesn't escape metacharacter '%c'
(D deprecated) You wrote a regular expression pattern something
like one of these:
m{ \x\{FF\} }x
m{foo\{1,3\}}
qr(foo\(bar\))
s[foo\[a-z\]bar][baz]
The interior braces, square brackets, and parentheses are treated
as metacharacters even though they are backslashed; instead write:
m{ \x{FF} }x
m{foo{1,3}}
qr(foo(bar))
s[foo[a-z]bar][baz]
The backslashes have no effect when a regular expression pattern is
delimited by "{}", "[]", or "()", which ordinarily are
metacharacters, and the delimiters are also used, paired, within
the interior of the pattern. It is planned that a future Perl
release will change the meaning of constructs like these so that
the backslashes will have an effect, so remove them from your code.
Useless use of \E
(W misc) You have a \E in a double-quotish string without a "\U",
"\L" or "\Q" preceding it.
Useless use of greediness modifier '%c' in regex; marked by <-- HERE in
m/%s/
(W regexp) You specified something like these:
qr/a{3}?/
qr/b{1,1}+/
The "?" and "+" don't have any effect, as they modify whether to
match more or fewer when there is a choice, and by specifying to
match exactly a given numer, there is no room left for a choice.
Useless use of %s in void context
(W void) You did something without a side effect in a context that
does nothing with the return value, such as a statement that
doesn't return a value from a block, or the left side of a scalar
comma operator. Very often this points not to stupidity on your
part, but a failure of Perl to parse your program the way you
thought it would. For example, you'd get this if you mixed up your
C precedence with Python precedence and said
$one, $two = 1, 2;
when you meant to say
($one, $two) = (1, 2);
Another common error is to use ordinary parentheses to construct a
list reference when you should be using square or curly brackets,
for example, if you say
$array = (1,2);
when you should have said
$array = [1,2];
The square brackets explicitly turn a list value into a scalar
value, while parentheses do not. So when a parenthesized list is
evaluated in a scalar context, the comma is treated like C's comma
operator, which throws away the left argument, which is not what
you want. See perlref for more on this.
This warning will not be issued for numerical constants equal to 0
or 1 since they are often used in statements like
1 while sub_with_side_effects();
String constants that would normally evaluate to 0 or 1 are warned
about.
Useless use of (?-p) in regex; marked by <-- HERE in m/%s/
(W regexp) The "p" modifier cannot be turned off once set. Trying
to do so is futile.
Useless use of "re" pragma
(W) You did "use re;" without any arguments. That isn't very
useful.
Useless use of sort in scalar context
(W void) You used sort in scalar context, as in :
my $x = sort @y;
This is not very useful, and perl currently optimizes this away.
Useless use of %s with no values
(W syntax) You used the push() or unshift() function with no
arguments apart from the array, like "push(@x)" or "unshift(@foo)".
That won't usually have any effect on the array, so is completely
useless. It's possible in principle that push(@tied_array) could
have some effect if the array is tied to a class which implements a
PUSH method. If so, you can write it as "push(@tied_array,())" to
avoid this warning.
"use" not allowed in expression
(F) The "use" keyword is recognized and executed at compile time,
and returns no useful value. See perlmod.
Use of assignment to $[ is deprecated
(D deprecated) The $[ variable (index of the first element in an
array) is deprecated. See "$[" in perlvar.
Use of bare << to mean <<"" is deprecated
(D deprecated) You are now encouraged to use the explicitly quoted
form if you wish to use an empty line as the terminator of the
here-document.
Use of chdir('') or chdir(undef) as chdir() deprecated
(D deprecated) chdir() with no arguments is documented to change to
$ENV{HOME} or $ENV{LOGDIR}. chdir(undef) and chdir('') share this
behavior, but that has been deprecated. In future versions they
will simply fail.
Be careful to check that what you pass to chdir() is defined and
not blank, else you might find yourself in your home directory.
Use of /c modifier is meaningless in s///
(W regexp) You used the /c modifier in a substitution. The /c
modifier is not presently meaningful in substitutions.
Use of /c modifier is meaningless without /g
(W regexp) You used the /c modifier with a regex operand, but
didn't use the /g modifier. Currently, /c is meaningful only when
/g is used. (This may change in the future.)
Use of comma-less variable list is deprecated
(D deprecated) The values you give to a format should be separated
by commas, not just aligned on a line.
Use of each() on hash after insertion without resetting hash iterator
results in undefined behavior
(S internal) The behavior of "each()" after insertion is undefined;
it may skip items, or visit items more than once. Consider using
"keys()" instead of "each()".
Use of := for an empty attribute list is not allowed
(F) The construction "my $x := 42" used to parse as equivalent to
"my $x : = 42" (applying an empty attribute list to $x). This
construct was deprecated in 5.12.0, and has now been made a syntax
error, so ":=" can be reclaimed as a new operator in the future.
If you need an empty attribute list, for example in a code
generator, add a space before the "=".
Use of freed value in iteration
(F) Perhaps you modified the iterated array within the loop? This
error is typically caused by code like the following:
@a = (3,4);
@a = () for (1,2,@a);
You are not supposed to modify arrays while they are being iterated
over. For speed and efficiency reasons, Perl internally does not
do full reference-counting of iterated items, hence deleting such
an item in the middle of an iteration causes Perl to see a freed
value.
Use of *glob{FILEHANDLE} is deprecated
(D deprecated) You are now encouraged to use the shorter *glob{IO}
form to access the filehandle slot within a typeglob.
Use of /g modifier is meaningless in split
(W regexp) You used the /g modifier on the pattern for a "split"
operator. Since "split" always tries to match the pattern
repeatedly, the "/g" has no effect.
Use of "goto" to jump into a construct is deprecated
(D deprecated) Using "goto" to jump from an outer scope into an
inner scope is deprecated and should be avoided.
Use of inherited AUTOLOAD for non-method %s() is deprecated
(D deprecated) As an (ahem) accidental feature, "AUTOLOAD"
subroutines are looked up as methods (using the @ISA hierarchy)
even when the subroutines to be autoloaded were called as plain
functions (e.g. "Foo::bar()"), not as methods (e.g. "Foo->bar()" or
"$obj->bar()").
This bug will be rectified in future by using method lookup only
for methods' "AUTOLOAD"s. However, there is a significant base of
existing code that may be using the old behavior. So, as an
interim step, Perl currently issues an optional warning when non-
methods use inherited "AUTOLOAD"s.
The simple rule is: Inheritance will not work when autoloading
non-methods. The simple fix for old code is: In any module that
used to depend on inheriting "AUTOLOAD" for non-methods from a base
class named "BaseClass", execute "*AUTOLOAD =
\&BaseClass::AUTOLOAD" during startup.
In code that currently says "use AutoLoader; @ISA =
qw(AutoLoader);" you should remove AutoLoader from @ISA and change
"use AutoLoader;" to "use AutoLoader 'AUTOLOAD';".
Use of %s in printf format not supported
(F) You attempted to use a feature of printf that is accessible
from only C. This usually means there's a better way to do it in
Perl.
Use of %s is deprecated
(D deprecated) The construct indicated is no longer recommended for
use, generally because there's a better way to do it, and also
because the old way has bad side effects.
Use of literal control characters in variable names is deprecated
(D deprecated) Using literal control characters in the source to
refer to the ^FOO variables, like $^X and "${^GLOBAL_PHASE}" is now
deprecated. This only affects code like "$\cT", where \cT is a
control in the source code: "${"\cT"}" and $^T remain valid.
Use of -l on filehandle%s
(W io) A filehandle represents an opened file, and when you opened
the file it already went past any symlink you are presumably trying
to look for. The operation returned "undef". Use a filename
instead.
Use of my $_ is experimental
(S experimental::lexical_topic) Lexical $_ is an experimental
feature and its behavior may change or even be removed in any
future release of perl. See the explanation under "$_" in perlvar.
Use of %s on a handle without * is deprecated
(D deprecated) You used "tie", "tied" or "untie" on a scalar but
that scalar happens to hold a typeglob, which means its filehandle
will be tied. If you mean to tie a handle, use an explicit * as in
"tie *$handle".
This was a long-standing bug that was removed in Perl 5.16, as
there was no way to tie the scalar itself when it held a typeglob,
and no way to untie a scalar that had had a typeglob assigned to
it. If you see this message, you must be using an older version.
Use of ?PATTERN? without explicit operator is deprecated
(D deprecated) You have written something like "?\w?", for a
regular expression that matches only once. Starting this term
directly with the question mark delimiter is now deprecated, so
that the question mark will be available for use in new operators
in the future. Write "m?\w?" instead, explicitly using the "m"
operator: the question mark delimiter still invokes match-once
behaviour.
Use of reference "%s" as array index
(W misc) You tried to use a reference as an array index; this
probably isn't what you mean, because references in numerical
context tend to be huge numbers, and so usually indicates
programmer error.
If you really do mean it, explicitly numify your reference, like
so: $array[0+$ref]. This warning is not given for overloaded
objects, however, because you can overload the numification and
stringification operators and then you presumably know what you are
doing.
Use of state $_ is experimental
(S experimental::lexical_topic) Lexical $_ is an experimental
feature and its behavior may change or even be removed in any
future release of perl. See the explanation under "$_" in perlvar.
Use of tainted arguments in %s is deprecated
(W taint, deprecated) You have supplied "system()" or "exec()" with
multiple arguments and at least one of them is tainted. This used
to be allowed but will become a fatal error in a future version of
perl. Untaint your arguments. See perlsec.
Use of uninitialized value%s
(W uninitialized) An undefined value was used as if it were already
defined. It was interpreted as a "" or a 0, but maybe it was a
mistake. To suppress this warning assign a defined value to your
variables.
To help you figure out what was undefined, perl will try to tell
you the name of the variable (if any) that was undefined. In some
cases it cannot do this, so it also tells you what operation you
used the undefined value in. Note, however, that perl optimizes
your program and the operation displayed in the warning may not
necessarily appear literally in your program. For example, "that
$foo" is usually optimized into ""that " . $foo", and the warning
will refer to the "concatenation (.)" operator, even though there
is no "." in your program.
Use \x{...} for more than two hex characters in regex; marked by
<-- HERE in m/%s/
(F) In a regular expression, you said something like
(?[ [ \xBEEF ] ])
Perl isn't sure if you meant this
(?[ [ \x{BEEF} ] ])
or if you meant this
(?[ [ \x{BE} E F ] ])
You need to add either braces or blanks to disambiguate.
Using a hash as a reference is deprecated
(D deprecated) You tried to use a hash as a reference, as in
"%foo->{"bar"}" or "%$ref->{"hello"}". Versions of perl <= 5.6.1
used to allow this syntax, but shouldn't have. It is now
deprecated, and will be removed in a future version.
Using an array as a reference is deprecated
(D deprecated) You tried to use an array as a reference, as in
"@foo->[23]" or "@$ref->[99]". Versions of perl <= 5.6.1 used to
allow this syntax, but shouldn't have. It is now deprecated, and
will be removed in a future version.
Using just the first character returned by \N{} in character class in
regex; marked by <-- HERE in m/%s/
(W regexp) A charnames handler may return a sequence of more than
one character. Currently all but the first one are discarded when
used in a regular expression pattern bracketed character class.
Using !~ with %s doesn't make sense
(F) Using the "!~" operator with "s///r", "tr///r" or "y///r" is
currently reserved for future use, as the exact behaviour has not
been decided. (Simply returning the boolean opposite of the
modified string is usually not particularly useful.)
UTF-16 surrogate U+%X
(S surrogate) You had a UTF-16 surrogate in a context where they
are not considered acceptable. These code points, between U+D800
and U+DFFF (inclusive), are used by Unicode only for UTF-16.
However, Perl internally allows all unsigned integer code points
(up to the size limit available on your platform), including
surrogates. But these can cause problems when being input or
output, which is likely where this message came from. If you
really really know what you are doing you can turn off this warning
by "no warnings 'surrogate';".
Value of %s can be "0"; test with defined()
(W misc) In a conditional expression, you used <HANDLE>, <*>
(glob), "each()", or "readdir()" as a boolean value. Each of these
constructs can return a value of "0"; that would make the
conditional expression false, which is probably not what you
intended. When using these constructs in conditional expressions,
test their values with the "defined" operator.
Value of CLI symbol "%s" too long
(W misc) A warning peculiar to VMS. Perl tried to read the value
of an %ENV element from a CLI symbol table, and found a resultant
string longer than 1024 characters. The return value has been
truncated to 1024 characters.
values on reference is experimental
(S experimental::autoderef) "values" with a scalar argument is
experimental and may change or be removed in a future Perl version.
If you want to take the risk of using this feature, simply disable
this warning:
no warnings "experimental::autoderef";
Variable "%s" is not available
(W closure) During compilation, an inner named subroutine or eval
is attempting to capture an outer lexical that is not currently
available. This can happen for one of two reasons. First, the
outer lexical may be declared in an outer anonymous subroutine that
has not yet been created. (Remember that named subs are created at
compile time, while anonymous subs are created at run-time.) For
example,
sub { my $a; sub f { $a } }
At the time that f is created, it can't capture the current value
of $a, since the anonymous subroutine hasn't been created yet.
Conversely, the following won't give a warning since the anonymous
subroutine has by now been created and is live:
sub { my $a; eval 'sub f { $a }' }->();
The second situation is caused by an eval accessing a variable that
has gone out of scope, for example,
sub f {
my $a;
sub { eval '$a' }
}
f()->();
Here, when the '$a' in the eval is being compiled, f() is not
currently being executed, so its $a is not available for capture.
Variable "%s" is not imported%s
(S misc) With "use strict" in effect, you referred to a global
variable that you apparently thought was imported from another
module, because something else of the same name (usually a
subroutine) is exported by that module. It usually means you put
the wrong funny character on the front of your variable.
Variable length lookbehind not implemented in regex m/%s/
(F) Lookbehind is allowed only for subexpressions whose length is
fixed and known at compile time. For positive lookbehind, you can
use the "\K" regex construct as a way to get the equivalent
functionality. See "(?<=pattern) \K" in perlre.
There are non-obvious Unicode rules under "/i" that can match
variably, but which you might not think could. For example, the
substring "ss" can match the single character LATIN SMALL LETTER
SHARP S. There are other sequences of ASCII characters that can
match single ligature characters, such as LATIN SMALL LIGATURE FFI
matching "qr/ffi/i". Starting in Perl v5.16, if you only care
about ASCII matches, adding the "/aa" modifier to the regex will
exclude all these non-obvious matches, thus getting rid of this
message. You can also say "use re qw(/aa)" to apply "/aa" to all
regular expressions compiled within its scope. See re.
"%s" variable %s masks earlier declaration in same %s
(W misc) A "my", "our" or "state" variable has been redeclared in
the current scope or statement, effectively eliminating all access
to the previous instance. This is almost always a typographical
error. Note that the earlier variable will still exist until the
end of the scope or until all closure references to it are
destroyed.
Variable syntax
(A) You've accidentally run your script through csh instead of
Perl. Check the #! line, or manually feed your script into Perl
yourself.
Variable "%s" will not stay shared
(W closure) An inner (nested) named subroutine is referencing a
lexical variable defined in an outer named subroutine.
When the inner subroutine is called, it will see the value of the
outer subroutine's variable as it was before and during the *first*
call to the outer subroutine; in this case, after the first call to
the outer subroutine is complete, the inner and outer subroutines
will no longer share a common value for the variable. In other
words, the variable will no longer be shared.
This problem can usually be solved by making the inner subroutine
anonymous, using the "sub {}" syntax. When inner anonymous subs
that reference variables in outer subroutines are created, they are
automatically rebound to the current values of such variables.
vector argument not supported with alpha versions
(S printf) The %vd (s)printf format does not support version
objects with alpha parts.
Verb pattern '%s' has a mandatory argument in regex; marked by <-- HERE
in m/%s/
(F) You used a verb pattern that requires an argument. Supply an
argument or check that you are using the right verb.
Verb pattern '%s' may not have an argument in regex; marked by <-- HERE
in m/%s/
(F) You used a verb pattern that is not allowed an argument.
Remove the argument or check that you are using the right verb.
Version number must be a constant number
(P) The attempt to translate a "use Module n.n LIST" statement into
its equivalent "BEGIN" block found an internal inconsistency with
the version number.
Version string '%s' contains invalid data; ignoring: '%s'
(W misc) The version string contains invalid characters at the end,
which are being ignored.
Warning: something's wrong
(W) You passed warn() an empty string (the equivalent of "warn """)
or you called it with no args and $@ was empty.
Warning: unable to close filehandle %s properly
(S) The implicit close() done by an open() got an error indication
on the close(). This usually indicates your file system ran out of
disk space.
Warning: Use of "%s" without parentheses is ambiguous
(S ambiguous) You wrote a unary operator followed by something that
looks like a binary operator that could also have been interpreted
as a term or unary operator. For instance, if you know that the
rand function has a default argument of 1.0, and you write
rand + 5;
you may THINK you wrote the same thing as
rand() + 5;
but in actual fact, you got
rand(+5);
So put in parentheses to say what you really mean.
when is experimental
(S experimental::smartmatch) "when" depends on smartmatch, which is
experimental. Additionally, it has several special cases that may
not be immediately obvious, and their behavior may change or even
be removed in any future release of perl. See the explanation
under "Experimental Details on given and when" in perlsyn.
Wide character in %s
(S utf8) Perl met a wide character (>255) when it wasn't expecting
one. This warning is by default on for I/O (like print). The
easiest way to quiet this warning is simply to add the ":utf8"
layer to the output, e.g. "binmode STDOUT, ':utf8'". Another way
to turn off the warning is to add "no warnings 'utf8';" but that is
often closer to cheating. In general, you are supposed to
explicitly mark the filehandle with an encoding, see open and
"binmode" in perlfunc.
Within []-length '%c' not allowed
(F) The count in the (un)pack template may be replaced by
"[TEMPLATE]" only if "TEMPLATE" always matches the same amount of
packed bytes that can be determined from the template alone. This
is not possible if it contains any of the codes @, /, U, u, w or a
*-length. Redesign the template.
write() on closed filehandle %s
(W closed) The filehandle you're writing to got itself closed
sometime before now. Check your control flow.
%s "\x%X" does not map to Unicode
(S utf8) When reading in different encodings, Perl tries to map
everything into Unicode characters. The bytes you read in are not
legal in this encoding. For example
utf8 "\xE4" does not map to Unicode
if you try to read in the a-diaereses Latin-1 as UTF-8.
'X' outside of string
(F) You had a (un)pack template that specified a relative position
before the beginning of the string being (un)packed. See "pack" in
perlfunc.
'x' outside of string in unpack
(F) You had a pack template that specified a relative position
after the end of the string being unpacked. See "pack" in
perlfunc.
YOU HAVEN'T DISABLED SET-ID SCRIPTS IN THE KERNEL YET!
(F) And you probably never will, because you probably don't have
the sources to your kernel, and your vendor probably doesn't give a
rip about what you want. Your best bet is to put a setuid C
wrapper around your script.
You need to quote "%s"
(W syntax) You assigned a bareword as a signal handler name.
Unfortunately, you already have a subroutine of that name declared,
which means that Perl 5 will try to call the subroutine when the
assignment is executed, which is probably not what you want. (If
it IS what you want, put an & in front.)
Your random numbers are not that random
(F) When trying to initialize the random seed for hashes, Perl
could not get any randomness out of your system. This usually
indicates Something Very Wrong.
Zero length \N{} in regex; marked by <-- HERE in m/%s/
(F) Named Unicode character escapes ("\N{...}") may return a zero-
length sequence. Such an escape was used in an extended character
class, i.e. "(?[...])", which is not permitted. Check that the
correct escape has been used, and the correct charnames handler is
in scope. The <-- HERE shows whereabouts in the regular expression
the problem was discovered.
SEE ALSO
warnings, diagnostics.
perl v5.20.2 2015-01-24 PERLDIAG(1)