DragonFly On-Line Manual Pages
PSXYZ(1) Generic Mapping Tools PSXYZ(1)
NAME
psxyz - Plot lines, polygons, and symbols in 3-D
SYNOPSIS
psxyz files -Jparameters -Jz|Zparameters
-Rwest/east/south/north[/zmin/zmax][r] [ -B[p|s]parameters ] [
-Ccptfile ] [ -Ddx/dy[dz] ] [ -Eazim/elev[+wlon/lat[/z]][+vx0/y0] ] [
-Gfill ] [ -H[i][nrec] ] [ -Iintens ] [ -K ] [ -L ] [ -N ] [ -O ] [ -P
] [ -Q ] [ -S[symbol][size] ] [ -U[just/dx/dy/][c|label] ] [ -V ] [
-W[-|*][pen] ] [ -X[a|c|r][x-shift[u]] ] [ -Y[a|c|r][y-shift[u]] ] [
-Zzlevel ] [ -:[i|o] ] [ -bi[s|S|d|D[ncol]|c[var1/...]] ] [ -ccopies ]
[ -fcolinfo ] [ -g[a]x|y|d|X|Y|D|[col]z[+|-]gap[u] ] [ -m[flag] ]
DESCRIPTION
psxyz reads (x,y,z) triplets from files [or standard input] and
generates PostScript code that will plot lines, polygons, or symbols at
those locations in 3-D. If a symbol is selected and no symbol size
given, then psxyz will interpret the fourth column of the input data as
symbol size. Symbols whose size is <= 0 are skipped. If no symbols
are specified then the symbol code (see -S below) must be present as
last column in the input. Multiple segment files may be plotted using
the -m option. If -S is not used, a line connecting the data points
will be drawn instead. To explicitly close polygons, use -L. Select a
fill with -G. If -G is set, -W will control whether the polygon
outline is drawn or not. If a symbol is selected, -G and -W determines
the fill and outline/no outline, respectively. The PostScript code is
written to standard output.
files List one or more file-names. If no files are given, psxyz will
read standard input.
-J Selects the map projection. Scale is UNIT/degree, 1:xxxxx, or
width in UNIT (upper case modifier). UNIT is cm, inch, or m,
depending on the MEASURE_UNIT setting in .gmtdefaults4, but this
can be overridden on the command line by appending c, i, or m to
the scale/width value. When central meridian is optional,
default is center of longitude range on -R option. Default
standard parallel is the equator. For map height, max
dimension, or min dimension, append h, *, or - to the width,
respectively.
More details can be found in the psbasemap man pages.
CYLINDRICAL PROJECTIONS:
-Jclon0/lat0/scale (Cassini)
-Jcyl_stere/[lon0/[lat0/]]scale (Cylindrical Stereographic)
-Jj[lon0/]scale (Miller)
-Jm[lon0/[lat0/]]scale (Mercator)
-Jmlon0/lat0/scale (Mercator - Give meridian and standard
parallel)
-Jo[a]lon0/lat0/azimuth/scale (Oblique Mercator - point and
azimuth)
-Jo[b]lon0/lat0/lon1/lat1/scale (Oblique Mercator - two points)
-Joclon0/lat0/lonp/latp/scale (Oblique Mercator - point and
pole)
-Jq[lon0/[lat0/]]scale (Cylindrical Equidistant)
-Jtlon0/[lat0/]scale (TM - Transverse Mercator)
-Juzone/scale (UTM - Universal Transverse Mercator)
-Jy[lon0/[lat0/]]scale (Cylindrical Equal-Area)
CONIC PROJECTIONS:
-Jblon0/lat0/lat1/lat2/scale (Albers)
-Jdlon0/lat0/lat1/lat2/scale (Conic Equidistant)
-Jllon0/lat0/lat1/lat2/scale (Lambert Conic Conformal)
-Jpoly/[lon0/[lat0/]]scale ((American) Polyconic)
AZIMUTHAL PROJECTIONS:
-Jalon0/lat0[/horizon]/scale (Lambert Azimuthal Equal-Area)
-Jelon0/lat0[/horizon]/scale (Azimuthal Equidistant)
-Jflon0/lat0[/horizon]/scale (Gnomonic)
-Jglon0/lat0[/horizon]/scale (Orthographic)
-Jglon0/lat0/altitude/azimuth/tilt/twist/Width/Height/scale
(General Perspective).
-Jslon0/lat0[/horizon]/scale (General Stereographic)
MISCELLANEOUS PROJECTIONS:
-Jh[lon0/]scale (Hammer)
-Ji[lon0/]scale (Sinusoidal)
-Jkf[lon0/]scale (Eckert IV)
-Jk[s][lon0/]scale (Eckert VI)
-Jn[lon0/]scale (Robinson)
-Jr[lon0/]scale (Winkel Tripel)
-Jv[lon0/]scale (Van der Grinten)
-Jw[lon0/]scale (Mollweide)
NON-GEOGRAPHICAL PROJECTIONS:
-Jp[a]scale[/origin][r|z] (Polar coordinates (theta,r))
-Jxx-scale[d|l|ppow|t|T][/y-scale[d|l|ppow|t|T]] (Linear, log,
and power scaling)
-Jz Sets the vertical scaling (for 3-D maps). Same syntax as -Jx.
-R xmin, xmax, ymin, and ymax specify the Region of interest. For
geographic regions, these limits correspond to west, east,
south, and north and you may specify them in decimal degrees or
in [+-]dd:mm[:ss.xxx][W|E|S|N] format. Append r if lower left
and upper right map coordinates are given instead of w/e/s/n.
The two shorthands -Rg and -Rd stand for global domain (0/360
and -180/+180 in longitude respectively, with -90/+90 in
latitude). Alternatively, specify the name of an existing grid
file and the -R settings (and grid spacing, if applicable) are
copied from the grid. For calendar time coordinates you may
either give (a) relative time (relative to the selected
TIME_EPOCH and in the selected TIME_UNIT; append t to -JX|x), or
(b) absolute time of the form [date]T[clock] (append T to
-JX|x). At least one of date and clock must be present; the T
is always required. The date string must be of the form
[-]yyyy[-mm[-dd]] (Gregorian calendar) or yyyy[-Www[-d]] (ISO
week calendar), while the clock string must be of the form
hh:mm:ss[.xxx]. The use of delimiters and their type and
positions must be exactly as indicated (however, input, output
and plot formats are customizable; see gmtdefaults).
OPTIONS
No space between the option flag and the associated arguments.
-B Sets map boundary annotation and tickmark intervals; see the
psbasemap man page for all the details.
-C Give a color palette file. If -S is set, let symbol fill color
be determined by the t-value in the fourth column. Additional
fields are shifted over by one column (optional size would be in
5th rather than 4th field, etc.). If -S is not set, then psxyz
expects the user to supply a multisegment line or polygon file
(requires -m) where each segment header contains a -Zval string.
The val will control the color of the line or polygon (if -L is
set) via the cpt file.
-D Offset the plot symbol or line locations by the given amounts
dx/dy[dz] [Default is no offset].
-E Sets the viewpoint's azimuth and elevation (for perspective
view) [180/90]. For frames used for animation, you may want to
append * to fix the center of your data domain (or specify a
particular world coordinate point with +wlon0/lat[/z]) which
will project to the center of your page size (or specify the
coordinates of the projected view point with +vx0/y0).
-G Select color or pattern for filling of symbols or polygons
[Default is no fill]. (See SPECIFYING FILL below).
Note when -m is chosen, psxyz will search for -G and -W strings
in all the subheaders and let any values thus found over-ride
the command line settings (see -m below).
-H Input file(s) has header record(s). If used, the default number
of header records is N_HEADER_RECS. Use -Hi if only input data
should have header records [Default will write out header
records if the input data have them]. Blank lines and lines
starting with # are always skipped.
-I Use the supplied intens value (nominally in the -1 to + 1 range)
to modulate the fill color by simulating illumination [none].
-K More PostScript code will be appended later [Default terminates
the plot system].
-L Force closed polygons: connect the endpoints of the line-
segment(s) and draw polygons. Also, in concert with -C, -m, and
-Z settings in the headers will use the implied color for
polygon fill [Default is polygon pen color]. -N Do NOT skip
symbols that fall outside map border [Default plots points
inside border only].
-O Selects Overlay plot mode [Default initializes a new plot
system].
-P Selects Portrait plotting mode [Default is Landscape, see
gmtdefaults to change this].
-Q Turn off the automatic sorting of items based on their distance
from the viewer. The default is to sort the items so that items
in the foreground are plotted after items in the background.
-S Plot symbols. If present, size is symbol size in the unit set
in .gmtdefaults4 (unless c, i, m, or p is appended). If the
symbol code (see below) is not given it will be read from the
last column in the input data; this cannot be used in
conjunction with -b. Optionally, append c, i, m, p to indicate
that the size information in the input data is in units of cm,
inch, meter, or point, respectively [Default is MEASURE_UNIT].
Note: if you give both size and symbol via the input file you
must use MEASURE_UNIT to indicate the units used for the symbol
size. The uppercase symbols A, C, D, G, H, I, N, S, T are
normalized to have the same area as a circle with diameter size,
while the size of the corresponding lowercase symbols refers to
the diameter of a circumscribed circle. Choose between these
symbol codes:
-S- x-dash (-). size is the length of a short horizontal (x-dir)
line segment.
-S+ plus (+). size is diameter of circumscribing circle.
-Sa star. size is diameter of circumscribing circle.
-Sb Vertical bar extending from base to y. size is bar width.
Append u if size is in x-units [Default is plot-distance units].
By default, base = ymin. Append bbase to change this value.
-SB Horizontal bar extending from base to x. size is bar width.
Append u if size is in y-units [Default is plot-distance units].
By default, base = xmin. Append bbase to change this value.
-Sc circle. size is diameter of circle.
-Sd diamond. size is diameter of circumscribing circle.
-Se ellipse. Direction (in degrees counter-clockwise from
horizontal), major_axis, and minor_axis must be found in columns
4, 5, and 6.
-SE Same as -Se, except azimuth (in degrees east of north) should be
given instead of direction. The azimuth will be mapped into an
angle based on the chosen map projection (-Se leaves the
directions unchanged.) Furthermore, the axes lengths must be
given in km instead of plot-distance units. An exception occurs
for a linear projection in which we assume the ellipse axes are
given in the same units as -R.
-Sf front. -Sfgap/size[dir][type][:offset]. Supply distance gap
between symbols and symbol size. If gap is negative, it is
interpreted to mean the number of symbols along the front
instead. Append dir to plot symbols on the left or right side
of the front [Default is centered]. Append type to specify
which symbol to plot: box, circle, fault, slip, or triangle.
[Default is fault]. Slip means left-lateral or right-lateral
strike-slip arrows (centered is not an option). Append :offset
to offset the first symbol from the beginning of the front by
that amount [Default is 0].
-Sg octagon. size is diameter of circumscribing circle.
-Sh hexagon. size is diameter of circumscribing circle.
-Si inverted triangle. size is diameter of circumscribing circle.
-Sj Rotated rectangle. Direction (in degrees counter-clockwise from
horizontal), x-dimension, and y-dimension must be found in
columns 4, 5, and 6.
-SJ Same as -Sj, except azimuth (in degrees east of north) should be
given instead of direction. The azimuth will be mapped into an
angle based on the chosen map projection (-Sj leaves the
directions unchanged.) Furthermore, the dimensions must be
given in km instead of plot-distance units. An exception occurs
for a linear projection in which we assume the dimensions are
given in the same units as -R.
-Sk kustom symbol. Append <name>/size, and we will look for a
definition file called <name>.def in (1) the current directory
or (2) in ~/.gmt or (3) in $GMT_SHAREDIR/custom. The symbol as
defined in that file is of size 1.0 by default; the appended
size will scale symbol accordingly. The symbols are plotted in
the x-y plane. Users may add their own custom *.def files; see
CUSTOM SYMBOLS in the psxy man page.
-Sl letter or text string (less than 64 characters). Give size, and
append /string after the size. Note that the size is only
approximate; no individual scaling is done for different
characters. Remember to escape special characters like *.
Optionally, you may append %font to select a particular font
[Default is ANNOT_FONT_PRIMARY].
-Sm math angle arc, optionally with one or two arrow heads [NOT
IMPLEMENTED YET]. The size is the radius of the arc. Start and
stop directions (in degrees counter-clockwise from horizontal)
for arc must be found in columns 3 and 4. Use -Smf to add arrow
head at first angle, -Sml for arrow head at last angle, and -Smb
for both [Default is no arrow heads].
-Sn pentagon. size is diameter of circumscribing circle.
-So column (3-D) extending from base to z. size sets base width
(Use xsize/ysize if not the same). Append u if size is in x-
units [Default is plot-distance units]. If no size is given we
expect both xsize and ysize as two extra data columns. By
default, base = 0. Append bbase to change this value. The
facet colors will be modified to simulate shading. Use -SO to
disable such 3-D illumination.
-Sp point. No size needs to be specified (1 pixel is used).
-Sq quoted line, i.e., lines with annotations such as contours. It
is assumed that each individual line has a constant z level
(i.e., each line must lie in the x-y plane). Append
[d|f|n|l|x]info[:labelinfo]. The required argument controls the
placement of labels along the quoted lines. Choose among five
controlling algorithms:
ddist[c|i|m|p] or Ddist[d|e|k|m|n]
For lower case d, give distances between labels on the
plot in your preferred measurement unit c (cm), i (inch),
m (meter), or p (points), while for upper case D, specify
distances in map units and append the unit; choose among
e (m), k (km), m (mile), n (nautical mile), or d
(spherical degree). [Default is 10c or 4i].
fffile.d
Reads the ascii file ffile.d and places labels at
locations in the file that matches locations along the
quoted lines. Inexact matches and points outside the
region are skipped.
l|Lline1[,line2,...]
Give the coordinates of the end points for one or more
comma-separated straight line segments. Labels will be
placed where these lines intersect the quoted lines. The
format of each line specification is
start_lon/start_lat/stop_lon/stop_lat. Both
start_lon/start_lat and stop_lon/stop_lat can be replaced
by a 2-character key that uses the justification format
employed in pstext to indicate a point on the map, given
as [LCR][BMT].
L will interpret the point pairs as defining great
circles [Default is straight line].
n|Nn_label
Specifies the number of equidistant labels for quoted
lines line [1]. Upper case N starts labeling exactly at
the start of the line [Default centers them along the
line]. N-1 places one justified label at start, while
N+1 places one justified label at the end of quoted
lines. Optionally, append /min_dist[c|i|m|p] to enforce
that a minimum distance separation between successive
labels is enforced.
x|Xxfile.d
Reads the multi-segment file xfile.d and places labels at
the intersections between the quoted lines and the lines
inxfile.d. X will resample the lines first along great-
circle arcs.
In addition, you may optionally append +rradius[c|i|m|p] to set
a minimum label separation in the x-y plane [no limitation].
The optional labelinfo controls the specifics of the label
formatting and consists of a concatenated string made up of any
of the following control arguments:
+aangle
For annotations at a fixed angle, +an for line-normal, or
+ap for line-parallel [Default].
+cdx[/dy]
Sets the clearance between label and optional text box.
Append c|i|m|p to specify the unit or % to indicate a
percentage of the label font size [15%].
+d Turns on debug which will draw helper points and lines to
illustrate the workings of the quoted line setup.
+ffont Sets the desired font [Default ANNOT_FONT_PRIMARY].
+g[color]
Selects opaque text boxes [Default is transparent];
optionally specify the color [Default is PAGE_COLOR].
(See SPECIFYING COLOR below).
+jjust Sets label justification [Default is MC]. Ignored when
-SqN|n+|-1 is used.
+kcolor
Sets color of text labels [Default is COLOR_BACKGROUND].
(See SPECIFYING COLOR below).
+llabel
Sets the constant label text.
+Lflag Sets the label text according to the specified flag:
+Lh Take the label from the current multisegment
header (first scan for an embedded -Llabel option,
if not use the first word following the segment
flag). For multiple-word labels, enclose entire
label in double quotes.
+Ld Take the Cartesian plot distances along the line
as the label; append c|i|m|p as the unit [Default
is MEASURE_UNIT].
+LD Calculate actual map distances; append d|e|k|m|n
as the unit [Default is d(egrees), unless label
placement was based on map distances along the
lines in which case we use the same unit specified
for that algorithm]. Requires a map projection to
be used.
+Lf Use text after the 2nd column in the fixed label
location file as the label. Requires the fixed
label location setting.
+Lx As +Lh but use the headers in the xfile.d instead.
Requires the crossing file option.
+ndx[/dy]
Nudges the placement of labels by the specified amount
(append c|i|m|p to specify the units). Increments are
considered in the coordinate system defined by the
orientation of the line; use +N to force increments in
the plot x/y coordinates system [no nudging].
+o Selects rounded rectangular text box [Default is
rectangular]. Not applicable for curved text (+v) and
only makes sense for opaque text boxes.
+p[pen]
Draws the outline of text boxsets [Default is no
outline]; optionally specify pen for outline [Default is
width = 0.25p, color = black, texture = solid]. (See
SPECIFYING PENS below).
+rmin_rad
Will not place labels where the line's radius of
curvature is less than min_rad [Default is 0].
+ssize Sets the desired font size in points [Default is 9].
+uunit Appends unit to all line labels. If unit starts with a
leading hyphen (-) then there will be no space between
label value and the unit. [Default is no unit].
+v Specifies curved labels following the path [Default is
straight labels].
+w Specifies how many (x, y) points will be used to estimate
label angles [Default is 10].
+=prefix
Prepends prefix to all line labels. If prefix starts
with a leading hyphen (-) then there will be no space
between label value and the prefix. [Default is no
prefix].
-Sr rectangle. No size needs to be specified, but the x- and y-
dimensions must be found in columns 4 and 5.
-Ss square. size is diameter of circumscribing circle.
-St triangle. size is diameter of circumscribing circle.
-Su cube (3-D). size sets length of all sides. Append u if size is
in x-units [Default is plot-distance units]. The facet colors
will be modified to simulate shading. Use -SU to disable such
3-D illumination.
-Sv vector. Direction and length must be found in columns 4 and 5
(this is a vector in the horizontal plane). size, if present,
will be interpreted as arrowwidth/headlength/headwidth [Default
unit is 0.075c/0.3c/0.25c (or 0.03i/0.12i/0.1i)]. By default
arrow attributes remains invariant to the length of the arrow.
To have the size of the vector scale down with decreasing size,
append nnorm, where vectors shorter than norm will have their
attributes scaled by length/norm. To center vector on balance
point, use -Svb; to align point with the vector head, use -Svh;
to align point with the vector tail, use -Svt [Default]. To
give the head point's x, y, z coordinates instead of direction
and length, use -Svs. Upper case B, H, T, S will draw a double-
headed vector [Default is single head].
-SV Same as -Sv, except azimuth should be given instead of
direction. The azimuth will be mapped into an angle based on
the chosen map projection (-Sv leaves the directions unchanged.)
-Sw pie wedge. Start and stop directions (in degrees counter-
clockwise from horizontal) for pie slice must be found in
columns 4 and 5.
-SW Same as -Sw, except azimuths (in degrees east of north) should
be given instead of the two directions. The azimuths will be
mapped into angles based on the chosen map projection (-Sw
leaves the directions unchanged.)
-Sx cross (x). size is diameter of circumscribing circle.
-Sy y-dash (|). size is the length of a short horizontal (y-dir)
line segment.
-Sz zdash. size is the length of a short vertical (z-dir) line
segment.
-U Draw Unix System time stamp on plot. By adding just/dx/dy/, the
user may specify the justification of the stamp and where the
stamp should fall on the page relative to lower left corner of
the plot. For example, BL/0/0 will align the lower left corner
of the time stamp with the lower left corner of the plot.
Optionally, append a label, or c (which will plot the command
string.). The GMT parameters UNIX_TIME, UNIX_TIME_POS, and
UNIX_TIME_FORMAT can affect the appearance; see the gmtdefaults
man page for details. The time string will be in the locale set
by the environment variable TZ (generally local time).
-V Selects verbose mode, which will send progress reports to stderr
[Default runs "silently"].
-W Set pen attributes for lines or the outline of symbols
[Defaults: width = 1, color = black, texture = solid]. A
leading * will use the lookup color (via -C) for both symbol
fill and outline pen color, while a leading - will set outline
pen color and turn off symbol fill. (See SPECIFYING PENS
below).
-X -Y Shift plot origin relative to the current origin by (x-shift,y-
shift) and optionally append the length unit (c, i, m, p). You
can prepend a to shift the origin back to the original position
after plotting, or prepend r [Default] to reset the current
origin to the new location. If -O is used then the default (x-
shift,y-shift) is (0,0), otherwise it is (r1i, r1i) or (r2.5c,
r2.5c). Alternatively, give c to align the center coordinate (x
or y) of the plot with the center of the page based on current
page size.
-Z For 3-D projections: Sets the z-level of the basemap [lower end
of z-range].
-: Toggles between (longitude,latitude) and (latitude,longitude)
input and/or output. [Default is (longitude,latitude)]. Append
i to select input only or o to select output only. [Default
affects both].
-bi Selects binary input. Append s for single precision [Default is
d (double)]. Uppercase S or D will force byte-swapping.
Optionally, append ncol, the number of columns in your binary
input file if it exceeds the columns needed by the program. Or
append c if the input file is netCDF. Optionally, append
var1/var2/... to specify the variables to be read. [Default is
the required number of columns given the chosen settings].
-c Specifies the number of plot copies. [Default is 1].
-f Special formatting of input and/or output columns (time or
geographical data). Specify i or o to make this apply only to
input or output [Default applies to both]. Give one or more
columns (or column ranges) separated by commas. Append T
(absolute calendar time), t (relative time in chosen TIME_UNIT
since TIME_EPOCH), x (longitude), y (latitude), or f (floating
point) to each column or column range item. Shorthand -f[i|o]g
means -f[i|o]0x,1y (geographic coordinates).
-g Examine the spacing between consecutive data points in order to
impose breaks in the line. Append x|X or y|Y to define a gap
when there is a large enough change in the x or y coordinates,
respectively, or d|D for distance gaps; use upper case to
calculate gaps from projected coordinates. For gap-testing on
other columns use [col]z; if col is not prepended the it
defaults to 2 (i.e., 3rd column). Append [+|-]gap and
optionally a unit u. Regarding optional signs: -ve means
previous minus current column value must exceed |gap to be a
gap, +ve means current minus previous column value must exceed
gap, and no sign means the absolute value of the difference must
exceed gap. For geographic data (x|y|d), the unit u may be
meter [Default], kilometer, miles, or nautical miles. For
projected data (X|Y|D), choose from inch, centimeter, meter, or
points [Default unit set by MEASURE_UNIT]. Note: For x|y|z with
time data the unit is instead controlled by TIME_UNIT. Repeat
the option to specify multiple criteria, of which any can be met
to produce a line break. Issue an additional -ga to indicate
that all criteria must be met instead. The -g option is ignored
if -S is set.
-m Multiple segment file. Segments are separated by a record whose
first character is flag [Default is '>']. On these segment
header records one or more of the following options can be
added:
-Gfill Use the new fill and turn filling on
-G- Turn filling off
-G+ Revert to default fill (none if not set on command line)
-Wpen Use the new pen and turn outline on
-W- Turn outline off
-W+ Revert to default pen (none if not set on command line)
-Zzval Obtain fill via cpt lookup using z-value zval
-ZNaN Get the NaN color from the cpt file
SPECIFYING PENS
pen The attributes of lines and symbol outlines as defined by pen is
a comma delimetered list of width, color and texture, each of
which is optional. width can be indicated as a measure (points,
centimeters, inches) or as faint, thin[ner|nest], thick[er|est],
fat[ter|test], or obese. color specifies a gray shade or color
(see SPECIFYING COLOR below). texture is a combination of
dashes `-' and dots `.'.
SPECIFYING FILL
fill The attribute fill specifies the solid shade or solid color (see
SPECIFYING COLOR below) or the pattern used for filling
polygons. Patterns are specified as pdpi/pattern, where pattern
gives the number of the built-in pattern (1-90) or the name of a
Sun 1-, 8-, or 24-bit raster file. The dpi sets the resolution
of the image. For 1-bit rasters: use Pdpi/pattern for inverse
video, or append :Fcolor[B[color]] to specify fore- and
background colors (use color = - for transparency). See GMT
Cookbook & Technical Reference Appendix E for information on
individual patterns.
SPECIFYING COLOR
color The color of lines, areas and patterns can be specified by a
valid color name; by a gray shade (in the range 0-255); by a
decimal color code (r/g/b, each in range 0-255; h-s-v, ranges
0-360, 0-1, 0-1; or c/m/y/k, each in range 0-1); or by a
hexadecimal color code (#rrggbb, as used in HTML). See the
gmtcolors manpage for more information and a full list of color
names.
EXAMPLES
To plot blue columns (width = 1.25 cm) at the positions listed in the
file heights.xyz on a 3-D projection of the space (0-10), (0-10),
(0-100), with tickmarks every 2, 2, and 10, viewing it from the
southeast at 30 degree elevation, use:
psxyz heights.xyz -R 0/10/0/10/0/100 -Jx 1.25c -Jz 0.125c -So 1.25c -G
blue -B 2:XLABEL:/2:YLABEL:/10:ZLABEL::."3-D PLOT":15 -E 135/30 -Uc -W
-P > heights.ps
BUGS
No hidden line removal is employed for polygons and lines. Symbols,
however, are first sorted according to their distance from the
viewpoint so that nearby symbols will overprint more distant ones
should they project to the same x,y position.
psxyz cannot handle filling of polygons that contain the south or north
pole. For such a polygon, make a copy and split it into two and make
each explicitly contain the polar point. The two polygons will combine
to give the desired effect when filled; to draw outline use the
original polygon.
The -N option does not adjust the BoundingBox information so you may
have to post-process the PostScript output with ps2raster -A to obtain
the correct BoundingBox.
SEE ALSO
GMT(1), gmtcolors(5), psbasemap(1), psxy(1)
GMT 4.5.14 1 Nov 2015 PSXYZ(1)