DragonFly On-Line Manual Pages
SCP(1) DragonFly General Commands Manual SCP(1)
NAME
scp - OpenSSH secure file copy
SYNOPSIS
scp [-346ABCOpqRrsTv] [-c cipher] [-D sftp_server_path] [-F ssh_config]
[-i identity_file] [-J destination] [-l limit] [-o ssh_option]
[-P port] [-S program] [-X sftp_option] source ... target
DESCRIPTION
scp copies files between hosts on a network.
scp uses the SFTP protocol over a ssh(1) connection for data transfer,
and uses the same authentication and provides the same security as a
login session.
scp will ask for passwords or passphrases if they are needed for
authentication.
The source and target may be specified as a local pathname, a remote host
with optional path in the form [user@]host:[path], or a URI in the form
scp://[user@]host[:port][/path]. Local file names can be made explicit
using absolute or relative pathnames to avoid scp treating file names
containing `:' as host specifiers.
When copying between two remote hosts, if the URI format is used, a port
cannot be specified on the target if the -R option is used.
The options are as follows:
-3 Copies between two remote hosts are transferred through the local
host. Without this option the data is copied directly between
the two remote hosts. Note that, when using the legacy SCP
protocol (via the -O flag), this option selects batch mode for
the second host as scp cannot ask for passwords or passphrases
for both hosts. This mode is the default.
-4 Forces scp to use IPv4 addresses only.
-6 Forces scp to use IPv6 addresses only.
-A Allows forwarding of ssh-agent(1) to the remote system. The
default is not to forward an authentication agent.
-B Selects batch mode (prevents asking for passwords or
passphrases).
-C Compression enable. Passes the -C flag to ssh(1) to enable
compression.
-c cipher
Selects the cipher to use for encrypting the data transfer. This
option is directly passed to ssh(1).
-D sftp_server_path
Connect directly to a local SFTP server program rather than a
remote one via ssh(1). This option may be useful in debugging
the client and server.
-F ssh_config
Specifies an alternative per-user configuration file for ssh.
This option is directly passed to ssh(1).
-i identity_file
Selects the file from which the identity (private key) for public
key authentication is read. This option is directly passed to
ssh(1).
-J destination
Connect to the target host by first making an scp connection to
the jump host described by destination and then establishing a
TCP forwarding to the ultimate destination from there. Multiple
jump hops may be specified separated by comma characters. This
is a shortcut to specify a ProxyJump configuration directive.
This option is directly passed to ssh(1).
-l limit
Limits the used bandwidth, specified in Kbit/s.
-O Use the legacy SCP protocol for file transfers instead of the
SFTP protocol. Forcing the use of the SCP protocol may be
necessary for servers that do not implement SFTP, for backwards-
compatibility for particular filename wildcard patterns and for
expanding paths with a `~' prefix for older SFTP servers.
-o ssh_option
Can be used to pass options to ssh in the format used in
ssh_config(5). This is useful for specifying options for which
there is no separate scp command-line flag. For full details of
the options listed below, and their possible values, see
ssh_config(5).
AddressFamily
BatchMode
BindAddress
BindInterface
CanonicalDomains
CanonicalizeFallbackLocal
CanonicalizeHostname
CanonicalizeMaxDots
CanonicalizePermittedCNAMEs
CASignatureAlgorithms
CertificateFile
CheckHostIP
Ciphers
Compression
ConnectionAttempts
ConnectTimeout
ControlMaster
ControlPath
ControlPersist
GlobalKnownHostsFile
GSSAPIAuthentication
GSSAPIDelegateCredentials
HashKnownHosts
Host
HostbasedAcceptedAlgorithms
HostbasedAuthentication
HostKeyAlgorithms
HostKeyAlias
Hostname
IdentitiesOnly
IdentityAgent
IdentityFile
IPQoS
KbdInteractiveAuthentication
KbdInteractiveDevices
KexAlgorithms
KnownHostsCommand
LogLevel
MACs
NoHostAuthenticationForLocalhost
NumberOfPasswordPrompts
PasswordAuthentication
PKCS11Provider
Port
PreferredAuthentications
ProxyCommand
ProxyJump
PubkeyAcceptedAlgorithms
PubkeyAuthentication
RekeyLimit
RequiredRSASize
SendEnv
ServerAliveInterval
ServerAliveCountMax
SetEnv
StrictHostKeyChecking
TCPKeepAlive
UpdateHostKeys
User
UserKnownHostsFile
VerifyHostKeyDNS
-P port
Specifies the port to connect to on the remote host. Note that
this option is written with a capital `P', because -p is already
reserved for preserving the times and mode bits of the file.
-p Preserves modification times, access times, and file mode bits
from the source file.
-q Quiet mode: disables the progress meter as well as warning and
diagnostic messages from ssh(1).
-R Copies between two remote hosts are performed by connecting to
the origin host and executing scp there. This requires that scp
running on the origin host can authenticate to the destination
host without requiring a password.
-r Recursively copy entire directories. Note that scp follows
symbolic links encountered in the tree traversal.
-S program
Name of program to use for the encrypted connection. The program
must understand ssh(1) options.
-T Disable strict filename checking. By default when copying files
from a remote host to a local directory scp checks that the
received filenames match those requested on the command-line to
prevent the remote end from sending unexpected or unwanted files.
Because of differences in how various operating systems and
shells interpret filename wildcards, these checks may cause
wanted files to be rejected. This option disables these checks
at the expense of fully trusting that the server will not send
unexpected filenames.
-v Verbose mode. Causes scp and ssh(1) to print debugging messages
about their progress. This is helpful in debugging connection,
authentication, and configuration problems.
-X sftp_option
Specify an option that controls aspects of SFTP protocol
behaviour. The valid options are:
nrequests=value
Controls how many concurrent SFTP read or write requests
may be in progress at any point in time during a download
or upload. By default 64 requests may be active
concurrently.
buffer=value
Controls the maximum buffer size for a single SFTP
read/write operation used during download or upload. By
default a 32KB buffer is used.
EXIT STATUS
The scp utility exits 0 on success, and >0 if an error occurs.
SEE ALSO
sftp(1), ssh(1), ssh-add(1), ssh-agent(1), ssh-keygen(1), ssh_config(5),
sftp-server(8), sshd(8)
HISTORY
scp is based on the rcp program in BSD source code from the Regents of
the University of California.
Since OpenSSH 9.0, scp has used the SFTP protocol for transfers by
default.
AUTHORS
Timo Rinne <tri@iki.fi>
Tatu Ylonen <ylo@cs.hut.fi>
CAVEATS
The legacy SCP protocol (selected by the -O flag) requires execution of
the remote user's shell to perform glob(3) pattern matching. This
requires careful quoting of any characters that have special meaning to
the remote shell, such as quote characters.
DragonFly 6.5-DEVELOPMENT December 16, 2022 DragonFly 6.5-DEVELOPMENT