DragonFly On-Line Manual Pages
SLAPD.CONF(5) DragonFly File Formats Manual SLAPD.CONF(5)
NAME
slapd.conf - configuration file for slapd, the stand-alone LDAP daemon
SYNOPSIS
/usr/local/etc/openldap/slapd.conf
DESCRIPTION
The file /usr/local/etc/openldap/slapd.conf contains configuration
information for the slapd(8) daemon. This configuration file is also
used by the SLAPD tools slapacl(8), slapadd(8), slapauth(8),
slapcat(8), slapdn(8), slapindex(8), and slaptest(8).
The slapd.conf file consists of a series of global configuration
options that apply to slapd as a whole (including all backends),
followed by zero or more database backend definitions that contain
information specific to a backend instance. The configuration options
are case-insensitive; their value, on a case by case basis, may be
case-sensitive.
The general format of slapd.conf is as follows:
# comment - these options apply to every database
<global configuration options>
# first database definition & configuration options
database <backend 1 type>
<configuration options specific to backend 1>
# subsequent database definitions & configuration options
...
As many backend-specific sections as desired may be included. Global
options can be overridden in a backend (for options that appear more
than once, the last appearance in the slapd.conf file is used).
If a line begins with white space, it is considered a continuation of
the previous line. No physical line should be over 2000 bytes long.
Blank lines and comment lines beginning with a `#' character are
ignored. Note: continuation lines are unwrapped before comment
processing is applied.
Arguments on configuration lines are separated by white space. If an
argument contains white space, the argument should be enclosed in
double quotes. If an argument contains a double quote (`"') or a
backslash character (`\'), the character should be preceded by a
backslash character.
The specific configuration options available are discussed below in the
Global Configuration Options, General Backend Options, and General
Database Options. Backend-specific options are discussed in the
slapd-<backend>(5) manual pages. Refer to the "OpenLDAP
Administrator's Guide" for more details on the slapd configuration
file.
GLOBAL CONFIGURATION OPTIONS
Options described in this section apply to all backends, unless
specifically overridden in a backend definition. Arguments that should
be replaced by actual text are shown in brackets <>.
access to <what> [ by <who> <access> <control> ]+
Grant access (specified by <access>) to a set of entries and/or
attributes (specified by <what>) by one or more requestors
(specified by <who>). If no access controls are present, the
default policy allows anyone and everyone to read anything but
restricts updates to rootdn. (e.g., "access to * by * read").
The rootdn can always read and write EVERYTHING! See
slapd.access(5) and the "OpenLDAP's Administrator's Guide" for
details.
allow <features>
Specify a set of features (separated by white space) to allow
(default none). bind_v2 allows acceptance of LDAPv2 bind
requests. Note that slapd(8) does not truly implement LDAPv2
(RFC 1777), now Historic (RFC 3494). bind_anon_cred allows
anonymous bind when credentials are not empty (e.g. when DN is
empty). bind_anon_dn allows unauthenticated (anonymous) bind
when DN is not empty. update_anon allows unauthenticated
(anonymous) update operations to be processed (subject to access
controls and other administrative limits). proxy_authz_anon
allows unauthenticated (anonymous) proxy authorization control
to be processed (subject to access controls, authorization and
other administrative limits).
argsfile <filename>
The (absolute) name of a file that will hold the slapd server's
command line (program name and options).
attributeoptions [option-name]...
Define tagging attribute options or option tag/range prefixes.
Options must not end with `-', prefixes must end with `-'. The
`lang-' prefix is predefined. If you use the attributeoptions
directive, `lang-' will no longer be defined and you must
specify it explicitly if you want it defined.
An attribute description with a tagging option is a subtype of
that attribute description without the option. Except for that,
options defined this way have no special semantics. Prefixes
defined this way work like the `lang-' options: They define a
prefix for tagging options starting with the prefix. That is,
if you define the prefix `x-foo-', you can use the option
`x-foo-bar'. Furthermore, in a search or compare, a prefix or
range name (with a trailing `-') matches all options starting
with that name, as well as the option with the range name sans
the trailing `-'. That is, `x-foo-bar-' matches `x-foo-bar' and
`x-foo-bar-baz'.
RFC 4520 reserves options beginning with `x-' for private
experiments. Other options should be registered with IANA, see
RFC 4520 section 3.5. OpenLDAP also has the `binary' option
built in, but this is a transfer option, not a tagging option.
attributetype ( <oid> [NAME <name>] [DESC <description>] [OBSOLETE]
[SUP <oid>] [EQUALITY <oid>] [ORDERING <oid>] [SUBSTR <oid>]
[SYNTAX <oidlen>] [SINGLE-VALUE] [COLLECTIVE]
[NO-USER-MODIFICATION] [USAGE <attributeUsage>] )
Specify an attribute type using the LDAPv3 syntax defined in RFC
4512. The slapd parser extends the RFC 4512 definition by
allowing string forms as well as numeric OIDs to be used for the
attribute OID and attribute syntax OID. (See the
objectidentifier description.)
authid-rewrite<cmd> <args>
Used by the authentication framework to convert simple user
names to an LDAP DN used for authorization purposes. Its
purpose is analogous to that of authz-regexp (see below). The
prefix authid- is followed by a set of rules analogous to those
described in slapo-rwm(5) for data rewriting (replace the rwm-
prefix with authid-). authid-rewrite<cmd> and authz-regexp
rules should not be intermixed.
authz-policy <policy>
Used to specify which rules to use for Proxy Authorization.
Proxy authorization allows a client to authenticate to the
server using one user's credentials, but specify a different
identity to use for authorization and access control purposes.
It essentially allows user A to login as user B, using user A's
password. The none flag disables proxy authorization. This is
the default setting. The from flag will use rules in the
authzFrom attribute of the authorization DN. The to flag will
use rules in the authzTo attribute of the authentication DN.
The any flag, an alias for the deprecated value of both, will
allow any of the above, whatever succeeds first (checked in to,
from sequence. The all flag requires both authorizations to
succeed.
The rules are mechanisms to specify which identities are allowed
to perform proxy authorization. The authzFrom attribute in an
entry specifies which other users are allowed to proxy login to
this entry. The authzTo attribute in an entry specifies which
other users this user can authorize as. Use of authzTo rules
can be easily abused if users are allowed to write arbitrary
values to this attribute. In general the authzTo attribute must
be protected with ACLs such that only privileged users can
modify it. The value of authzFrom and authzTo describes an
identity or a set of identities; it can take five forms:
ldap:///<base>??[<scope>]?<filter>
dn[.<dnstyle>]:<pattern>
u[.<mech>[/<realm>]]:<pattern>
group[/objectClass[/attributeType]]:<pattern>
<pattern>
<dnstyle>:={exact|onelevel|children|subtree|regex}
The first form is a valid LDAP URI where the <host>:<port>, the
<attrs> and the <extensions> portions must be absent, so that
the search occurs locally on either authzFrom or authzTo. The
second form is a DN, with the optional style modifiers exact,
onelevel, children, and subtree for exact, onelevel, children
and subtree matches, which cause <pattern> to be normalized
according to the DN normalization rules, or the special regex
style, which causes the <pattern> to be treated as a POSIX
(''extended'') regular expression, as discussed in regex(7)
and/or re_format(7). A pattern of * means any non-anonymous DN.
The third form is a SASL id, with the optional fields <mech> and
<realm> that allow to specify a SASL mechanism, and eventually a
SASL realm, for those mechanisms that support one. The need to
allow the specification of a mechanism is still debated, and
users are strongly discouraged to rely on this possibility. The
fourth form is a group specification, consisting of the keyword
group, optionally followed by the specification of the group
objectClass and member attributeType. The group with DN
<pattern> is searched with base scope, and in case of match, the
values of the member attributeType are searched for the asserted
DN. For backwards compatibility, if no identity type is
provided, i.e. only <pattern> is present, an exact DN is
assumed; as a consequence, <pattern> is subjected to DN
normalization. Since the interpretation of authzFrom and
authzTo can impact security, users are strongly encouraged to
explicitly set the type of identity specification that is being
used. A subset of these rules can be used as third arg in the
authz-regexp statement (see below); significantly, the URI,
provided it results in exactly one entry, and the dn.exact:<dn>
forms.
authz-regexp <match> <replace>
Used by the authentication framework to convert simple user
names, such as provided by SASL subsystem, or extracted from
certificates in case of cert-based SASL EXTERNAL, or provided
within the RFC 4370 "proxied authorization" control, to an LDAP
DN used for authorization purposes. Note that the resulting DN
need not refer to an existing entry to be considered valid.
When an authorization request is received from the SASL
subsystem, the SASL USERNAME, REALM, and MECHANISM are taken,
when available, and combined into a name of the form
UID=<username>[[,CN=<realm>],CN=<mechanism>],CN=auth
This name is then compared against the match POSIX
(''extended'') regular expression, and if the match is
successful, the name is replaced with the replace string. If
there are wildcard strings in the match regular expression that
are enclosed in parenthesis, e.g.
UID=([^,]*),CN=.*
then the portion of the name that matched the wildcard will be
stored in the numbered placeholder variable $1. If there are
other wildcard strings in parenthesis, the matching strings will
be in $2, $3, etc. up to $9. The placeholders can then be used
in the replace string, e.g.
UID=$1,OU=Accounts,DC=example,DC=com
The replaced name can be either a DN, i.e. a string prefixed by
"dn:", or an LDAP URI. If the latter, the server will use the
URI to search its own database(s) and, if the search returns
exactly one entry, the name is replaced by the DN of that entry.
The LDAP URI must have no hostport, attrs, or extensions
components, but the filter is mandatory, e.g.
ldap:///OU=Accounts,DC=example,DC=com??one?(UID=$1)
The protocol portion of the URI must be strictly ldap. Note
that this search is subject to access controls. Specifically,
the authentication identity must have "auth" access in the
subject.
Multiple authz-regexp options can be given in the configuration
file to allow for multiple matching and replacement patterns.
The matching patterns are checked in the order they appear in
the file, stopping at the first successful match.
concurrency <integer>
Specify a desired level of concurrency. Provided to the
underlying thread system as a hint. The default is not to
provide any hint.
conn_max_pending <integer>
Specify the maximum number of pending requests for an anonymous
session. If requests are submitted faster than the server can
process them, they will be queued up to this limit. If the limit
is exceeded, the session is closed. The default is 100.
conn_max_pending_auth <integer>
Specify the maximum number of pending requests for an
authenticated session. The default is 1000.
defaultsearchbase <dn>
Specify a default search base to use when client submits a non-
base search request with an empty base DN. Base scoped search
requests with an empty base DN are not affected.
disallow <features>
Specify a set of features (separated by white space) to disallow
(default none). bind_anon disables acceptance of anonymous bind
requests. Note that this setting does not prohibit anonymous
directory access (See "require authc"). bind_simple disables
simple (bind) authentication. tls_2_anon disables forcing
session to anonymous status (see also tls_authc) upon StartTLS
operation receipt. tls_authc disallows the StartTLS operation
if authenticated (see also tls_2_anon).
proxy_authz_non_critical disables acceptance of the proxied
authorization control (RFC4370) when criticality is FALSE.
dontusecopy_non_critical disables acceptance of the dontUseCopy
control (a work in progress) when criticality is FALSE.
ditcontentrule ( <oid> [NAME <name>] [DESC <description>] [OBSOLETE]
[AUX <oids>] [MUST <oids>] [MAY <oids>] [NOT <oids>] )
Specify an DIT Content Rule using the LDAPv3 syntax defined in
RFC 4512. The slapd parser extends the RFC 4512 definition by
allowing string forms as well as numeric OIDs to be used for the
attribute OID and attribute syntax OID. (See the
objectidentifier description.)
gentlehup { on | off }
A SIGHUP signal will only cause a 'gentle' shutdown-attempt:
Slapd will stop listening for new connections, but will not
close the connections to the current clients. Future write
operations return unwilling-to-perform, though. Slapd
terminates when all clients have closed their connections (if
they ever do), or - as before - if it receives a SIGTERM signal.
This can be useful if you wish to terminate the server and start
a new slapd server with another database, without disrupting the
currently active clients. The default is off. You may wish to
use idletimeout along with this option.
idletimeout <integer>
Specify the number of seconds to wait before forcibly closing an
idle client connection. A idletimeout of 0 disables this
feature. The default is 0. You may also want to set the
writetimeout option.
include <filename>
Read additional configuration information from the given file
before continuing with the next line of the current file.
index_intlen <integer>
Specify the key length for ordered integer indices. The most
significant bytes of the binary integer will be used for index
keys. The default value is 4, which provides exact indexing for
31 bit values. A floating point representation is used to index
too large values.
index_substr_if_minlen <integer>
Specify the minimum length for subinitial and subfinal indices.
An attribute value must have at least this many characters in
order to be processed by the indexing functions. The default is
2.
index_substr_if_maxlen <integer>
Specify the maximum length for subinitial and subfinal indices.
Only this many characters of an attribute value will be
processed by the indexing functions; any excess characters are
ignored. The default is 4.
index_substr_any_len <integer>
Specify the length used for subany indices. An attribute value
must have at least this many characters in order to be
processed. Attribute values longer than this length will be
processed in segments of this length. The default is 4. The
subany index will also be used in subinitial and subfinal index
lookups when the filter string is longer than the
index_substr_if_maxlen value.
index_substr_any_step <integer>
Specify the steps used in subany index lookups. This value sets
the offset for the segments of a filter string that are
processed for a subany index lookup. The default is 2. For
example, with the default values, a search using this filter
"cn=*abcdefgh*" would generate index lookups for "abcd", "cdef",
and "efgh".
Note: Indexing support depends on the particular backend in use. Also,
changing these settings will generally require deleting any indices
that depend on these parameters and recreating them with slapindex(8).
ldapsyntax ( <oid> [DESC <description>] [X-SUBST <substitute-syntax>] )
Specify an LDAP syntax using the LDAPv3 syntax defined in RFC
4512. The slapd parser extends the RFC 4512 definition by
allowing string forms as well as numeric OIDs to be used for the
syntax OID. (See the objectidentifier description.) The slapd
parser also honors the X-SUBST extension (an OpenLDAP-specific
extension), which allows to use the ldapsyntax statement to
define a non-implemented syntax along with another syntax, the
extension value substitute-syntax, as its temporary replacement.
The substitute-syntax must be defined. This allows to define
attribute types that make use of non-implemented syntaxes using
the correct syntax OID. Unless X-SUBST is used, this
configuration statement would result in an error, since no
handlers would be associated to the resulting syntax structure.
listener-threads <integer>
Specify the number of threads to use for the connection manager.
The default is 1 and this is typically adequate for up to 16 CPU
cores. The value should be set to a power of 2.
localSSF <SSF>
Specifies the Security Strength Factor (SSF) to be given local
LDAP sessions, such as those to the ldapi:// listener. For a
description of SSF values, see sasl-secprops's minssf option
description. The default is 71.
logfile <filename>
Specify a file for recording debug log messages. By default
these messages only go to stderr and are not recorded anywhere
else. Specifying a logfile copies messages to both stderr and
the logfile.
loglevel <integer> [...]
Specify the level at which debugging statements and operation
statistics should be syslogged (currently logged to the
syslogd(8) LOG_LOCAL4 facility). They must be considered
subsystems rather than increasingly verbose log levels. Some
messages with higher priority are logged regardless of the
configured loglevel as soon as any logging is configured. Log
levels are additive, and available levels are:
1 (0x1 trace) trace function calls
2 (0x2 packets) debug packet handling
4 (0x4 args) heavy trace debugging (function args)
8 (0x8 conns) connection management
16 (0x10 BER) print out packets sent and received
32 (0x20 filter) search filter processing
64 (0x40 config) configuration file processing
128 (0x80 ACL) access control list processing
256 (0x100 stats) connections, LDAP operations,
results (recommended)
512 (0x200 stats2) stats log entries sent
1024 (0x400 shell) print communication with shell
backends
2048 (0x800 parse) entry parsing
16384 (0x4000 sync) LDAPSync replication
32768 (0x8000 none) only messages that get logged
whatever log level is set
The desired log level can be input as a single integer that
combines the (ORed) desired levels, both in decimal or in
hexadecimal notation, as a list of integers (that are ORed
internally), or as a list of the names that are shown between
brackets, such that
loglevel 129
loglevel 0x81
loglevel 128 1
loglevel 0x80 0x1
loglevel acl trace
are equivalent. The keyword any can be used as a shortcut to
enable logging at all levels (equivalent to -1). The keyword
none, or the equivalent integer representation, causes those
messages that are logged regardless of the configured loglevel
to be logged. In fact, if loglevel is set to 0, no logging
occurs, so at least the none level is required to have high
priority messages logged.
The loglevel defaults to stats. This level should usually also
be included when using other loglevels, to help analyze the
logs.
moduleload <filename>
Specify the name of a dynamically loadable module to load. The
filename may be an absolute path name or a simple filename. Non-
absolute names are searched for in the directories specified by
the modulepath option. This option and the modulepath option are
only usable if slapd was compiled with --enable-modules.
modulepath <pathspec>
Specify a list of directories to search for loadable modules.
Typically the path is colon-separated but this depends on the
operating system. The default is /usr/local/libexec/openldap,
which is where the standard OpenLDAP install will place its
modules.
objectclass ( <oid> [NAME <name>] [DESC <description>] [OBSOLETE]
[SUP <oids>] [{ ABSTRACT | STRUCTURAL | AUXILIARY }]
[MUST <oids>] [MAY <oids>] )
Specify an objectclass using the LDAPv3 syntax defined in RFC
4512. The slapd parser extends the RFC 4512 definition by
allowing string forms as well as numeric OIDs to be used for the
object class OID. (See the objectidentifier description.)
Object classes are "STRUCTURAL" by default.
objectidentifier <name> { <oid> | <name>[:<suffix>] }
Define a string name that equates to the given OID. The string
can be used in place of the numeric OID in objectclass and
attribute definitions. The name can also be used with a suffix
of the form ":xx" in which case the value "oid.xx" will be used.
password-hash <hash> [<hash>...]
This option configures one or more hashes to be used in
generation of user passwords stored in the userPassword
attribute during processing of LDAP Password Modify Extended
Operations (RFC 3062). The <hash> must be one of {SSHA}, {SHA},
{SMD5}, {MD5}, {CRYPT}, and {CLEARTEXT}. The default is {SSHA}.
{SHA} and {SSHA} use the SHA-1 algorithm (FIPS 160-1), the
latter with a seed.
{MD5} and {SMD5} use the MD5 algorithm (RFC 1321), the latter
with a seed.
{CRYPT} uses the crypt(3).
{CLEARTEXT} indicates that the new password should be added to
userPassword as clear text.
Note that this option does not alter the normal user
applications handling of userPassword during LDAP Add, Modify,
or other LDAP operations.
password-crypt-salt-format <format>
Specify the format of the salt passed to crypt(3) when
generating {CRYPT} passwords (see password-hash) during
processing of LDAP Password Modify Extended Operations (RFC
3062).
This string needs to be in sprintf(3) format and may include one
(and only one) %s conversion. This conversion will be
substituted with a string of random characters from
[A-Za-z0-9./]. For example, "%.2s" provides a two character
salt and "$1$%.8s" tells some versions of crypt(3) to use an MD5
algorithm and provides 8 random characters of salt. The default
is "%s", which provides 31 characters of salt.
pidfile <filename>
The (absolute) name of a file that will hold the slapd server's
process ID (see getpid(2)).
referral <url>
Specify the referral to pass back when slapd(8) cannot find a
local database to handle a request. If specified multiple
times, each url is provided.
require <conditions>
Specify a set of conditions (separated by white space) to
require (default none). The directive may be specified globally
and/or per-database; databases inherit global conditions, so
per-database specifications are additive. bind requires bind
operation prior to directory operations. LDAPv3 requires
session to be using LDAP version 3. authc requires
authentication prior to directory operations. SASL requires
SASL authentication prior to directory operations. strong
requires strong authentication prior to directory operations.
The strong keyword allows protected "simple" authentication as
well as SASL authentication. none may be used to require no
conditions (useful to clear out globally set conditions within a
particular database); it must occur first in the list of
conditions.
reverse-lookup on | off
Enable/disable client name unverified reverse lookup (default is
off if compiled with --enable-rlookups).
rootDSE <file>
Specify the name of an LDIF(5) file containing user defined
attributes for the root DSE. These attributes are returned in
addition to the attributes normally produced by slapd.
The root DSE is an entry with information about the server and
its capabilities, in operational attributes. It has the empty
DN, and can be read with e.g.:
ldapsearch -x -b "" -s base "+"
See RFC 4512 section 5.1 for details.
sasl-auxprops <plugin> [...]
Specify which auxprop plugins to use for authentication lookups.
The default is empty, which just uses slapd's internal support.
Usually no other auxprop plugins are needed.
sasl-host <fqdn>
Used to specify the fully qualified domain name used for SASL
processing.
sasl-realm <realm>
Specify SASL realm. Default is empty.
sasl-secprops <properties>
Used to specify Cyrus SASL security properties. The none flag
(without any other properties) causes the flag properties
default, "noanonymous,noplain", to be cleared. The noplain flag
disables mechanisms susceptible to simple passive attacks. The
noactive flag disables mechanisms susceptible to active attacks.
The nodict flag disables mechanisms susceptible to passive
dictionary attacks. The noanonymous flag disables mechanisms
which support anonymous login. The forwardsec flag require
forward secrecy between sessions. The passcred require
mechanisms which pass client credentials (and allow mechanisms
which can pass credentials to do so). The minssf=<factor>
property specifies the minimum acceptable security strength
factor as an integer approximate to effective key length used
for encryption. 0 (zero) implies no protection, 1 implies
integrity protection only, 56 allows DES or other weak ciphers,
112 allows triple DES and other strong ciphers, 128 allows RC4,
Blowfish and other modern strong ciphers. The default is 0.
The maxssf=<factor> property specifies the maximum acceptable
security strength factor as an integer (see minssf description).
The default is INT_MAX. The maxbufsize=<size> property
specifies the maximum security layer receive buffer size
allowed. 0 disables security layers. The default is 65536.
schemadn <dn>
Specify the distinguished name for the subschema subentry that
controls the entries on this server. The default is
"cn=Subschema".
security <factors>
Specify a set of security strength factors (separated by white
space) to require (see sasl-secprops's minssf option for a
description of security strength factors). The directive may be
specified globally and/or per-database. ssf=<n> specifies the
overall security strength factor. transport=<n> specifies the
transport security strength factor. tls=<n> specifies the TLS
security strength factor. sasl=<n> specifies the SASL security
strength factor. update_ssf=<n> specifies the overall security
strength factor to require for directory updates.
update_transport=<n> specifies the transport security strength
factor to require for directory updates. update_tls=<n>
specifies the TLS security strength factor to require for
directory updates. update_sasl=<n> specifies the SASL security
strength factor to require for directory updates.
simple_bind=<n> specifies the security strength factor required
for simple username/password authentication. Note that the
transport factor is measure of security provided by the
underlying transport, e.g. ldapi:// (and eventually IPSEC). It
is not normally used.
serverID <integer> [<URL>]
Specify an integer ID from 0 to 4095 for this server (limited to
3 hexadecimal digits). The ID may also be specified as a
hexadecimal ID by prefixing the value with "0x". These IDs are
required when using multimaster replication and each master must
have a unique ID. Note that this requirement also applies to
separate masters contributing to a glued set of databases. If
the URL is provided, this directive may be specified multiple
times, providing a complete list of participating servers and
their IDs. The fully qualified hostname of each server should be
used in the supplied URLs. The IDs are used in the "replica id"
field of all CSNs generated by the specified server. The default
value is zero. Example:
serverID 1
sizelimit {<integer>|unlimited}
sizelimit size[.{soft|hard|unchecked}]=<integer> [...]
Specify the maximum number of entries to return from a search
operation. The default size limit is 500. Use unlimited to
specify no limits. The second format allows a fine grain
setting of the size limits. Extra args can be added on the same
line. See limits for an explanation of the different flags.
sockbuf_max_incoming <integer>
Specify the maximum incoming LDAP PDU size for anonymous
sessions. The default is 262143.
sockbuf_max_incoming_auth <integer>
Specify the maximum incoming LDAP PDU size for authenticated
sessions. The default is 4194303.
sortvals <attr> [...]
Specify a list of multi-valued attributes whose values will
always be maintained in sorted order. Using this option will
allow Modify, Compare, and filter evaluations on these
attributes to be performed more efficiently. The resulting sort
order depends on the attributes' syntax and matching rules and
may not correspond to lexical order or any other recognizable
order.
tcp-buffer [listener=<URL>] [{read|write}=]<size>
Specify the size of the TCP buffer. A global value for both
read and write TCP buffers related to any listener is defined,
unless the listener is explicitly specified, or either the read
or write qualifiers are used. See tcp(7) for details. Note
that some OS-es implement automatic TCP buffer tuning.
threads <integer>
Specify the maximum size of the primary thread pool. The
default is 16; the minimum value is 2.
timelimit {<integer>|unlimited}
timelimit time[.{soft|hard}]=<integer> [...]
Specify the maximum number of seconds (in real time) slapd will
spend answering a search request. The default time limit is
3600. Use unlimited to specify no limits. The second format
allows a fine grain setting of the time limits. Extra args can
be added on the same line. See limits for an explanation of the
different flags.
tool-threads <integer>
Specify the maximum number of threads to use in tool mode. This
should not be greater than the number of CPUs in the system.
The default is 1.
writetimeout <integer>
Specify the number of seconds to wait before forcibly closing a
connection with an outstanding write. This allows recovery from
various network hang conditions. A writetimeout of 0 disables
this feature. The default is 0.
TLS OPTIONS
If slapd is built with support for Transport Layer Security, there are
more options you can specify.
TLSCipherSuite <cipher-suite-spec>
Permits configuring what ciphers will be accepted and the
preference order. <cipher-suite-spec> should be a cipher
specification for the TLS library in use (OpenSSL, GnuTLS, or
Mozilla NSS). Example:
OpenSSL:
TLSCipherSuite HIGH:MEDIUM:+SSLv2
GnuTLS:
TLSCiphersuite SECURE256:!AES-128-CBC
To check what ciphers a given spec selects in OpenSSL, use:
openssl ciphers -v <cipher-suite-spec>
With GnuTLS the available specs can be found in the manual page
of gnutls-cli(1) (see the description of the option --priority).
In older versions of GnuTLS, where gnutls-cli does not support
the option --priority, you can obtain the -- more limited --
list of ciphers by calling:
gnutls-cli -l
When using Mozilla NSS, the OpenSSL cipher suite specifications
are used and translated into the format used internally by
Mozilla NSS. There isn't an easy way to list the cipher suites
from the command line. The authoritative list is in the source
code for Mozilla NSS in the file sslinfo.c in the structure
static const SSLCipherSuiteInfo suiteInfo[]
TLSCACertificateFile <filename>
Specifies the file that contains certificates for all of the
Certificate Authorities that slapd will recognize. The
certificate for the CA that signed the server certificate must
be included among these certificates. If the signing CA was not
a top-level (root) CA, certificates for the entire sequence of
CA's from the signing CA to the top-level CA should be present.
Multiple certificates are simply appended to the file; the order
is not significant.
TLSCACertificatePath <path>
Specifies the path of a directory that contains Certificate
Authority certificates in separate individual files. Usually
only one of this or the TLSCACertificateFile is used. This
directive is not supported when using GnuTLS.
When using Mozilla NSS, <path> may contain a Mozilla NSS
cert/key database. If <path> contains a Mozilla NSS cert/key
database and CA cert files, OpenLDAP will use the cert/key
database and will ignore the CA cert files.
TLSCertificateFile <filename>
Specifies the file that contains the slapd server certificate.
When using Mozilla NSS, if using a cert/key database (specified
with TLSCACertificatePath), TLSCertificateFile specifies the
name of the certificate to use:
TLSCertificateFile Server-Cert
If using a token other than the internal built in token, specify
the token name first, followed by a colon:
TLSCertificateFile my hardware device:Server-Cert
Use certutil -L to list the certificates by name:
certutil -d /path/to/certdbdir -L
TLSCertificateKeyFile <filename>
Specifies the file that contains the slapd server private key
that matches the certificate stored in the TLSCertificateFile
file. Currently, the private key must not be protected with a
password, so it is of critical importance that it is protected
carefully.
When using Mozilla NSS, TLSCertificateKeyFile specifies the name
of a file that contains the password for the key for the
certificate specified with TLSCertificateFile. The modutil
command can be used to turn off password protection for the
cert/key database. For example, if TLSCACertificatePath
specifes /etc/openldap/certdb as the location of the cert/key
database, use modutil to change the password to the empty
string:
modutil -dbdir /etc/openldap/certdb -changepw 'NSS Certificate DB'
You must have the old password, if any. Ignore the WARNING
about the running browser. Press 'Enter' for the new password.
TLSDHParamFile <filename>
This directive specifies the file that contains parameters for
Diffie-Hellman ephemeral key exchange. This is required in
order to use a DSA certificate on the server. If multiple sets
of parameters are present in the file, all of them will be
processed. Note that setting this option may also enable
Anonymous Diffie-Hellman key exchanges in certain non-default
cipher suites. You should append "!ADH" to your cipher suites
if you have changed them from the default, otherwise no
certificate exchanges or verification will be done. When using
GnuTLS these parameters are always generated randomly so this
directive is ignored. This directive is ignored when using
Mozilla NSS.
TLSProtocolMin <major>[.<minor>]
Specifies minimum SSL/TLS protocol version that will be
negotiated. If the server doesn't support at least that
version, the SSL handshake will fail. To require TLS 1.x or
higher, set this option to 3.(x+1), e.g.,
TLSProtocolMin 3.2
would require TLS 1.1. Specifying a minimum that is higher than
that supported by the OpenLDAP implementation will result in it
requiring the highest level that it does support. This
directive is ignored with GnuTLS.
TLSRandFile <filename>
Specifies the file to obtain random bits from when
/dev/[u]random is not available. Generally set to the name of
the EGD/PRNGD socket. The environment variable RANDFILE can
also be used to specify the filename. This directive is ignored
with GnuTLS and Mozilla NSS.
TLSVerifyClient <level>
Specifies what checks to perform on client certificates in an
incoming TLS session, if any. The <level> can be specified as
one of the following keywords:
never This is the default. slapd will not ask the client for a
certificate.
allow The client certificate is requested. If no certificate
is provided, the session proceeds normally. If a bad
certificate is provided, it will be ignored and the
session proceeds normally.
try The client certificate is requested. If no certificate
is provided, the session proceeds normally. If a bad
certificate is provided, the session is immediately
terminated.
demand | hard | true
These keywords are all equivalent, for compatibility
reasons. The client certificate is requested. If no
certificate is provided, or a bad certificate is
provided, the session is immediately terminated.
Note that a valid client certificate is required in order
to use the SASL EXTERNAL authentication mechanism with a
TLS session. As such, a non-default TLSVerifyClient
setting must be chosen to enable SASL EXTERNAL
authentication.
TLSCRLCheck <level>
Specifies if the Certificate Revocation List (CRL) of the CA
should be used to verify if the client certificates have not
been revoked. This requires TLSCACertificatePath parameter to be
set. This directive is ignored with GnuTLS and Mozilla NSS.
<level> can be specified as one of the following keywords:
none No CRL checks are performed
peer Check the CRL of the peer certificate
all Check the CRL for a whole certificate chain
TLSCRLFile <filename>
Specifies a file containing a Certificate Revocation List to be
used for verifying that certificates have not been revoked. This
directive is only valid when using GnuTLS and Mozilla NSS.
GENERAL BACKEND OPTIONS
Options in this section only apply to the configuration file section
for the specified backend. They are supported by every type of
backend.
backend <databasetype>
Mark the beginning of a backend definition. <databasetype>
should be one of bdb, config, dnssrv, hdb, ldap, ldif, mdb,
meta, monitor, null, passwd, perl, relay, shell, or sql,
depending on which backend will serve the database.
GENERAL DATABASE OPTIONS
Options in this section only apply to the configuration file section
for the database in which they are defined. They are supported by
every type of backend. Note that the database and at least one suffix
option are mandatory for each database.
database <databasetype>
Mark the beginning of a new database instance definition.
<databasetype> should be one of bdb, config, dnssrv, hdb, ldap,
ldif, mdb, meta, monitor, null, passwd, perl, relay, shell, or
sql, depending on which backend will serve the database.
LDAP operations, even subtree searches, normally access only one
database. That can be changed by gluing databases together with
the subordinate keyword. Access controls and some overlays can
also involve multiple databases.
add_content_acl on | off
Controls whether Add operations will perform ACL checks on the
content of the entry being added. This check is off by default.
See the slapd.access(5) manual page for more details on ACL
requirements for Add operations.
extra_attrs <attrlist>
Lists what attributes need to be added to search requests.
Local storage backends return the entire entry to the frontend.
The frontend takes care of only returning the requested
attributes that are allowed by ACLs. However, features like
access checking and so may need specific attributes that are not
automatically returned by remote storage backends, like proxy
backends and so on. <attrlist> is a list of attributes that are
needed for internal purposes and thus always need to be
collected, even when not explicitly requested by clients.
hidden on | off
Controls whether the database will be used to answer queries. A
database that is hidden will never be selected to answer any
queries, and any suffix configured on the database will be
ignored in checks for conflicts with other databases. By
default, hidden is off.
lastmod on | off
Controls whether slapd will automatically maintain the
modifiersName, modifyTimestamp, creatorsName, and
createTimestamp attributes for entries. It also controls the
entryCSN and entryUUID attributes, which are needed by the
syncrepl provider. By default, lastmod is on.
limits <selector> <limit> [<limit> [...]]
Specify time and size limits based on the operation's initiator
or base DN. The argument <selector> can be any of
anonymous | users | [<dnspec>=]<pattern> |
group[/oc[/at]]=<pattern>
with
<dnspec> ::= dn[.<type>][.<style>]
<type> ::= self | this
<style> ::= exact | base | onelevel | subtree | children
| regex | anonymous
DN type self is the default and means the bound user, while this
means the base DN of the operation. The term anonymous matches
all unauthenticated clients. The term users matches all
authenticated clients; otherwise an exact dn pattern is assumed
unless otherwise specified by qualifying the (optional) key
string dn with exact or base (which are synonyms), to require an
exact match; with onelevel, to require exactly one level of
depth match; with subtree, to allow any level of depth match,
including the exact match; with children, to allow any level of
depth match, not including the exact match; regex explicitly
requires the (default) match based on POSIX (''extended'')
regular expression pattern. Finally, anonymous matches unbound
operations; the pattern field is ignored. The same behavior is
obtained by using the anonymous form of the <selector> clause.
The term group, with the optional objectClass oc and
attributeType at fields, followed by pattern, sets the limits
for any DN listed in the values of the at attribute (default
member) of the oc group objectClass (default groupOfNames) whose
DN exactly matches pattern.
The currently supported limits are size and time.
The syntax for time limits is time[.{soft|hard}]=<integer>,
where integer is the number of seconds slapd will spend
answering a search request. If no time limit is explicitly
requested by the client, the soft limit is used; if the
requested time limit exceeds the hard limit, the value of the
limit is used instead. If the hard limit is set to the keyword
soft, the soft limit is used in either case; if it is set to the
keyword unlimited, no hard limit is enforced. Explicit requests
for time limits smaller or equal to the hard limit are honored.
If no limit specifier is set, the value is assigned to the soft
limit, and the hard limit is set to soft, to preserve the
original behavior.
The syntax for size limits is
size[.{soft|hard|unchecked}]=<integer>, where integer is the
maximum number of entries slapd will return answering a search
request. If no size limit is explicitly requested by the
client, the soft limit is used; if the requested size limit
exceeds the hard limit, the value of the limit is used instead.
If the hard limit is set to the keyword soft, the soft limit is
used in either case; if it is set to the keyword unlimited, no
hard limit is enforced. Explicit requests for size limits
smaller or equal to the hard limit are honored. The unchecked
specifier sets a limit on the number of candidates a search
request is allowed to examine. The rationale behind it is that
searches for non-properly indexed attributes may result in large
sets of candidates, which must be examined by slapd(8) to
determine whether they match the search filter or not. The
unchecked limit provides a means to drop such operations before
they are even started. If the selected candidates exceed the
unchecked limit, the search will abort with Unwilling to
perform. If it is set to the keyword unlimited, no limit is
applied (the default). If it is set to disabled, the search is
not even performed; this can be used to disallow searches for a
specific set of users. If no limit specifier is set, the value
is assigned to the soft limit, and the hard limit is set to
soft, to preserve the original behavior.
In case of no match, the global limits are used. The default
values are the same as for sizelimit and timelimit; no limit is
set on unchecked.
If pagedResults control is requested, the hard size limit is
used by default, because the request of a specific page size is
considered an explicit request for a limitation on the number of
entries to be returned. However, the size limit applies to the
total count of entries returned within the search, and not to a
single page. Additional size limits may be enforced; the syntax
is size.pr={<integer>|noEstimate|unlimited}, where integer is
the max page size if no explicit limit is set; the keyword
noEstimate inhibits the server from returning an estimate of the
total number of entries that might be returned (note: the
current implementation does not return any estimate). The
keyword unlimited indicates that no limit is applied to the
pagedResults control page size. The syntax
size.prtotal={<integer>|unlimited|disabled} allows to set a
limit on the total number of entries that a pagedResults control
allows to return. By default it is set to the hard limit. When
set, integer is the max number of entries that the whole search
with pagedResults control can return. Use unlimited to allow
unlimited number of entries to be returned, e.g. to allow the
use of the pagedResults control as a means to circumvent size
limitations on regular searches; the keyword disabled disables
the control, i.e. no paged results can be returned. Note that
the total number of entries returned when the pagedResults
control is requested cannot exceed the hard size limit of
regular searches unless extended by the prtotal switch.
The limits statement is typically used to let an unlimited
number of entries be returned by searches performed with the
identity used by the consumer for synchronization purposes by
means of the RFC 4533 LDAP Content Synchronization protocol (see
syncrepl for details).
maxderefdepth <depth>
Specifies the maximum number of aliases to dereference when
trying to resolve an entry, used to avoid infinite alias loops.
The default is 15.
mirrormode on | off
This option puts a replica database into "mirror" mode. Update
operations will be accepted from any user, not just the
updatedn. The database must already be configured as a syncrepl
consumer before this keyword may be set. This mode also requires
a serverID (see above) to be configured. By default, mirrormode
is off.
monitoring on | off
This option enables database-specific monitoring in the entry
related to the current database in the "cn=Databases,cn=Monitor"
subtree of the monitor database, if the monitor database is
enabled. Currently, only the BDB and the HDB databases provide
database-specific monitoring. The default depends on the
backend type.
overlay <overlay-name>
Add the specified overlay to this database. An overlay is a
piece of code that intercepts database operations in order to
extend or change them. Overlays are pushed onto a stack over the
database, and so they will execute in the reverse of the order
in which they were configured and the database itself will
receive control last of all. See the slapd.overlays(5) manual
page for an overview of the available overlays. Note that all
of the database's regular settings should be configured before
any overlay settings.
readonly on | off
This option puts the database into "read-only" mode. Any
attempts to modify the database will return an "unwilling to
perform" error. By default, readonly is off.
restrict <oplist>
Specify a whitespace separated list of operations that are
restricted. If defined inside a database specification,
restrictions apply only to that database, otherwise they are
global. Operations can be any of add, bind, compare, delete,
extended[=<OID>], modify, rename, search, or the special pseudo-
operations read and write, which respectively summarize read and
write operations. The use of restrict write is equivalent to
readonly on (see above). The extended keyword allows to
indicate the OID of the specific operation to be restricted.
rootdn <dn>
Specify the distinguished name that is not subject to access
control or administrative limit restrictions for operations on
this database. This DN may or may not be associated with an
entry. An empty root DN (the default) specifies no root access
is to be granted. It is recommended that the rootdn only be
specified when needed (such as when initially populating a
database). If the rootdn is within a namingContext (suffix) of
the database, a simple bind password may also be provided using
the rootpw directive. Many optional features, including
syncrepl, require the rootdn to be defined for the database.
rootpw <password>
Specify a password (or hash of the password) for the rootdn.
The password can only be set if the rootdn is within the
namingContext (suffix) of the database. This option accepts all
RFC 2307 userPassword formats known to the server (see
password-hash description) as well as cleartext. slappasswd(8)
may be used to generate a hash of a password. Cleartext and
{CRYPT} passwords are not recommended. If empty (the default),
authentication of the root DN is by other means (e.g. SASL).
Use of SASL is encouraged.
suffix <dn suffix>
Specify the DN suffix of queries that will be passed to this
backend database. Multiple suffix lines can be given and at
least one is required for each database definition.
If the suffix of one database is "inside" that of another, the
database with the inner suffix must come first in the
configuration file. You may also want to glue such databases
together with the subordinate keyword.
subordinate [advertise]
Specify that the current backend database is a subordinate of
another backend database. A subordinate database may have only
one suffix. This option may be used to glue multiple databases
into a single namingContext. If the suffix of the current
database is within the namingContext of a superior database,
searches against the superior database will be propagated to the
subordinate as well. All of the databases associated with a
single namingContext should have identical rootdns. Behavior of
other LDAP operations is unaffected by this setting. In
particular, it is not possible to use moddn to move an entry
from one subordinate to another subordinate within the
namingContext.
If the optional advertise flag is supplied, the naming context
of this database is advertised in the root DSE. The default is
to hide this database context, so that only the superior context
is visible.
If the slap tools slapcat(8), slapadd(8), or slapindex(8) are
used on the superior database, any glued subordinates that
support these tools are opened as well.
Databases that are glued together should usually be configured
with the same indices (assuming they support indexing), even for
attributes that only exist in some of these databases. In
general, all of the glued databases should be configured as
similarly as possible, since the intent is to provide the
appearance of a single directory.
Note that the subordinate functionality is implemented
internally by the glue overlay and as such its behavior will
interact with other overlays in use. By default, the glue
overlay is automatically configured as the last overlay on the
superior backend. Its position on the backend can be explicitly
configured by setting an overlay glue directive at the desired
position. This explicit configuration is necessary e.g. when
using the syncprov overlay, which needs to follow glue in order
to work over all of the glued databases. E.g.
database bdb
suffix dc=example,dc=com
...
overlay glue
overlay syncprov
sync_use_subentry
Store the syncrepl contextCSN in a subentry instead of the
context entry of the database. The subentry's RDN will be
"cn=ldapsync". By default the contextCSN is stored in the
context entry.
syncrepl rid=<replica ID> provider=ldap[s]://<hostname>[:port]
searchbase=<base DN> [type=refreshOnly|refreshAndPersist]
[interval=dd:hh:mm:ss] [retry=[<retry interval> <# of
retries>]+] [filter=<filter str>] [scope=sub|one|base|subord]
[attrs=<attr list>] [exattrs=<attr list>] [attrsonly]
[sizelimit=<limit>] [timelimit=<limit>] [schemachecking=on|off]
[network-timeout=<seconds>] [timeout=<seconds>]
[bindmethod=simple|sasl] [binddn=<dn>] [saslmech=<mech>]
[authcid=<identity>] [authzid=<identity>] [credentials=<passwd>]
[realm=<realm>] [secprops=<properties>]
[keepalive=<idle>:<probes>:<interval>] [starttls=yes|critical]
[tls_cert=<file>] [tls_key=<file>] [tls_cacert=<file>]
[tls_cacertdir=<path>] [tls_reqcert=never|allow|try|demand]
[tls_cipher_suite=<ciphers>] [tls_crlcheck=none|peer|all]
[tls_protocol_min=<major>[.<minor>]] [suffixmassage=<real DN>]
[logbase=<base DN>] [logfilter=<filter str>]
[syncdata=default|accesslog|changelog]
Specify the current database as a replica which is kept up-to-
date with the master content by establishing the current
slapd(8) as a replication consumer site running a syncrepl
replication engine. The replica content is kept synchronized to
the master content using the LDAP Content Synchronization
protocol. Refer to the "OpenLDAP Administrator's Guide" for
detailed information on setting up a replicated slapd directory
service using the syncrepl replication engine.
rid identifies the current syncrepl directive within the
replication consumer site. It is a non-negative integer not
greater than 999 (limited to three decimal digits).
provider specifies the replication provider site containing the
master content as an LDAP URI. If <port> is not given, the
standard LDAP port number (389 or 636) is used.
The content of the syncrepl replica is defined using a search
specification as its result set. The consumer slapd will send
search requests to the provider slapd according to the search
specification. The search specification includes searchbase,
scope, filter, attrs, attrsonly, sizelimit, and timelimit
parameters as in the normal search specification. The scope
defaults to sub, the filter defaults to (objectclass=*), while
there is no default searchbase. The attrs list defaults to "*,+"
to return all user and operational attributes, and attrsonly is
unset by default. The sizelimit and timelimit only accept
"unlimited" and positive integers, and both default to
"unlimited". The sizelimit and timelimit parameters define a
consumer requested limitation on the number of entries that can
be returned by the LDAP Content Synchronization operation; as
such, it is intended to implement partial replication based on
the size of the replicated database and on the time required by
the synchronization. Note, however, that any provider-side
limits for the replication identity will be enforced by the
provider regardless of the limits requested by the LDAP Content
Synchronization operation, much like for any other search
operation. exattrs option may also be used to specify
attributes that should be omitted from incoming entries. The
scope defaults to sub, the filter defaults to (objectclass=*),
and there is no default searchbase. The attrs list defaults to
"*,+" to return all user and operational attributes, and
attrsonly and exattrs are unset by default. The sizelimit and
timelimit only accept "unlimited" and positive integers, and
both default to "unlimited". Note, however, that any provider-
side limits for the replication identity will be enforced by the
provider regardless of the limits requested by the LDAP Content
Synchronization operation, much like for any other search
operation.
The LDAP Content Synchronization protocol has two operation
types. In the refreshOnly operation, the next synchronization
search operation is periodically rescheduled at an interval time
(specified by interval parameter; 1 day by default) after each
synchronization operation finishes. In the refreshAndPersist
operation, a synchronization search remains persistent in the
provider slapd. Further updates to the master replica will
generate searchResultEntry to the consumer slapd as the search
responses to the persistent synchronization search.
If an error occurs during replication, the consumer will attempt
to reconnect according to the retry parameter which is a list of
the <retry interval> and <# of retries> pairs. For example,
retry="60 10 300 3" lets the consumer retry every 60 seconds for
the first 10 times and then retry every 300 seconds for the next
3 times before stop retrying. The `+' in <# of retries> means
indefinite number of retries until success. If no retry was
specified, by default syncrepl retries every hour forever.
The schema checking can be enforced at the LDAP Sync consumer
site by turning on the schemachecking parameter. The default is
off. Schema checking on means that replicated entries must have
a structural objectClass, must obey to objectClass requirements
in terms of required/allowed attributes, and that naming
attributes and distinguished values must be present. As a
consequence, schema checking should be off when partial
replication is used.
The network-timeout parameter sets how long the consumer will
wait to establish a network connection to the provider. Once a
connection is established, the timeout parameter determines how
long the consumer will wait for the initial Bind request to
complete. The defaults for these parameters come from
ldap.conf(5).
A bindmethod of simple requires the options binddn and
credentials and should only be used when adequate security
services (e.g. TLS or IPSEC) are in place. REMEMBER: simple
bind credentials must be in cleartext! A bindmethod of sasl
requires the option saslmech. Depending on the mechanism, an
authentication identity and/or credentials can be specified
using authcid and credentials. The authzid parameter may be
used to specify an authorization identity. Specific security
properties (as with the sasl-secprops keyword above) for a SASL
bind can be set with the secprops option. A non default SASL
realm can be set with the realm option. The identity used for
synchronization by the consumer should be allowed to receive an
unlimited number of entries in response to a search request.
The provider, other than allow authentication of the syncrepl
identity, should grant that identity appropriate access
privileges to the data that is being replicated (access
directive), and appropriate time and size limits. This can be
accomplished by either allowing unlimited sizelimit and
timelimit, or by setting an appropriate limits statement in the
consumer's configuration (see sizelimit and limits for details).
The keepalive parameter sets the values of idle, probes, and
interval used to check whether a socket is alive; idle is the
number of seconds a connection needs to remain idle before TCP
starts sending keepalive probes; probes is the maximum number of
keepalive probes TCP should send before dropping the connection;
interval is interval in seconds between individual keepalive
probes. Only some systems support the customization of these
values; the keepalive parameter is ignored otherwise, and
system-wide settings are used.
The starttls parameter specifies use of the StartTLS extended
operation to establish a TLS session before Binding to the
provider. If the critical argument is supplied, the session will
be aborted if the StartTLS request fails. Otherwise the syncrepl
session continues without TLS. The tls_reqcert setting defaults
to "demand" and the other TLS settings default to the same as
the main slapd TLS settings.
The suffixmassage parameter allows the consumer to pull entries
from a remote directory whose DN suffix differs from the local
directory. The portion of the remote entries' DNs that matches
the searchbase will be replaced with the suffixmassage DN.
Rather than replicating whole entries, the consumer can query
logs of data modifications. This mode of operation is referred
to as delta syncrepl. In addition to the above parameters, the
logbase and logfilter parameters must be set appropriately for
the log that will be used. The syncdata parameter must be set to
either "accesslog" if the log conforms to the slapo-accesslog(5)
log format, or "changelog" if the log conforms to the obsolete
changelog format. If the syncdata parameter is omitted or set to
"default" then the log parameters are ignored.
updatedn <dn>
This option is only applicable in a slave database. It
specifies the DN permitted to update (subject to access
controls) the replica. It is only needed in certain push-mode
replication scenarios. Generally, this DN should not be the
same as the rootdn used at the master.
updateref <url>
Specify the referral to pass back when slapd(8) is asked to
modify a replicated local database. If specified multiple
times, each url is provided.
DATABASE-SPECIFIC OPTIONS
Each database may allow specific configuration options; they are
documented separately in the backends' manual pages. See the
slapd.backends(5) manual page for an overview of available backends.
EXAMPLES
Here is a short example of a configuration file:
include /usr/local/etc/openldap/schema/core.schema
pidfile /var/db/run/slapd.pid
# Subtypes of "name" (e.g. "cn" and "ou") with the
# option ";x-hidden" can be searched for/compared,
# but are not shown. See slapd.access(5).
attributeoptions x-hidden lang-
access to attrs=name;x-hidden by * =cs
# Protect passwords. See slapd.access(5).
access to attrs=userPassword by * auth
# Read access to other attributes and entries.
access to * by * read
database bdb
suffix "dc=our-domain,dc=com"
# The database directory MUST exist prior to
# running slapd AND should only be accessible
# by the slapd/tools. Mode 0700 recommended.
directory /var/db/openldap-data
# Indices to maintain
index objectClass eq
index cn,sn,mail pres,eq,approx,sub
# We serve small clients that do not handle referrals,
# so handle remote lookups on their behalf.
database ldap
suffix ""
uri ldap://ldap.some-server.com/
lastmod off
"OpenLDAP Administrator's Guide" contains a longer annotated example of
a configuration file. The original /usr/local/etc/openldap/slapd.conf
is another example.
FILES
/usr/local/etc/openldap/slapd.conf
default slapd configuration file
SEE ALSO
ldap(3), gnutls-cli(1), slapd-config(5), slapd.access(5),
slapd.backends(5), slapd.overlays(5), slapd.plugin(5), slapd(8),
slapacl(8), slapadd(8), slapauth(8), slapcat(8), slapdn(8),
slapindex(8), slappasswd(8), slaptest(8).
"OpenLDAP Administrator's Guide" (http://www.OpenLDAP.org/doc/admin/)
ACKNOWLEDGEMENTS
OpenLDAP Software is developed and maintained by The OpenLDAP Project
<http://www.openldap.org/>. OpenLDAP Software is derived from
University of Michigan LDAP 3.3 Release.
OpenLDAP 2.4.43 2015/11/30 SLAPD.CONF(5)