DragonFly On-Line Manual Pages
taskrc(5) User Manuals taskrc(5)
NAME
taskrc - Configuration details for the task(1) command
SYNOPSIS
$HOME/.taskrc
task rc:<directory-path>/.taskrc ...
TASKRC=<directory-path>/.taskrc task ...
DESCRIPTION
Taskwarrior obtains its configuration data from a file called .taskrc .
This file is normally located in the user's home directory:
$HOME/.taskrc
The default location can be overridden using the rc: attribute when
running task:
$ task rc:<directory-path>/.taskrc ...
or using the TASKRC environment variable:
$ TASKRC=/tmp/.taskrc task ...
Individual options can be overridden by using the rc.<name>: attribute
when running task:
$ task rc.<name>:<value> ...
or
$ task rc.<name>=<value> ...
If Taskwarrior is run without an existing configuration file it will
ask if it should create a default, sample .taskrc file in the user's
home directory.
The .taskrc file follows a very simply syntax defining name/value
pairs:
<name> = <value>
There may be whitespace around <name>, '=' and <value>, and it is
ignored. Whitespace within the <value> is left intact. Whitespace is
not permitted in comma-separated lists. The entry must be on a single
line, no continuations. Values support UTF8 as well as JSON encoding,
such as \uNNNN.
Note that Taskwarrior is flexible about the values used to represent
Boolean items. You can use "on", "yes", "y", "1" and "true". Anything
else means "off".
include <file>
There may be whitespace around 'include' and <file>. The file may be an
absolute or relative path, and the special character '~' is expanded to
mean $HOME. The entry must be on a single line, no continuations.
# <comment>
A comment consists of the character '#', and extends from the '#' to
the end of the line. There is no way to comment a multi-line block.
There may be blank lines.
Almost every value has a default setting, and an empty .taskrc file is
one that makes use of every default. The contents of the .taskrc file
therefore represent overrides of the default values. To remove a
default value completely there must be an entry like this:
<name> =
This entry overrides the default value with a blank value.
EDITING
You can edit your .taskrc file by hand if you wish, or you can use the
'config' command. To permanently set a value in your .taskrc file, use
this command:
$ task config nag "You have more urgent tasks."
To delete an entry, use this command:
$ task config nag
Taskwarrior will then use the default value. To explicitly set a value
to blank, and therefore avoid using the default value, use this
command:
$ task config nag ""
Taskwarrior will also display all your settings with this command:
$ task show
and in addition, will also perform a check of all the values in the
file, warning you of anything it finds amiss.
NESTING CONFIGURATION FILES
The .taskrc can include other files containing configuration settings
by using the include statement:
include <path/to/the/configuration/file/to/be/included>
By using include files you can divide your main configuration file into
several ones containing just the relevant configuration data like
colors, etc.
There are two excellent uses of includes in your .taskrc, shown here:
include /usr/local/share/taskwarrior/rc/holidays.en-US.rc
include /usr/local/share/taskwarrior/rc/dark-16.theme
This includes two standard files that are distributed with Taskwarrior,
which define a set of US holidays, and set up a 16-color theme to use,
to color the reports and calendar.
ENVIRONMENT VARIABLES
These environment variables override defaults and command line
arguments.
TASKDATA=~/.task
This overrides the default path for the Taskwarrior data files.
TASKRC=~/.taskrc
This overrides the default RC file.
CONFIGURATION VARIABLES
Valid variable names and their default values are:
FILES
data.location=$HOME/.task
This is a path to the directory containing all the Taskwarrior
files. By default, it is set up to be ~/.task, for example:
/home/paul/.task
Note that you can use the ~ shell meta character, which will be
properly expanded.
Note that the TASKDATA environment variable overrides this
setting.
locking=on
Determines whether to use file locking when accessing the
pending.data and completed.data files. Defaults to "on". Solaris
users who store the data files on an NFS mount may need to set
locking to "off". Note that there is danger in setting this
value to "off" - another program (or another instance of task)
may write to the task.pending file at the same time.
gc=on Can be used to temporarily suspend garbage collection (gc), so
that task IDs don't change. Note that this should be used in the
form of a command line override (task rc.gc=off ...), and not
permanently used in the .taskrc file, as this significantly
affects performance in the long term.
hooks=on
This master control switch enables hook script processing. The
default value is 'on', but certain extensions and environments
may need to disable hooks.
exit.on.missing.db=no
When set to 'yes' causes the program to exit if the database
(~/.task or rc.data.location or TASKDATA override) is missing.
Default value is 'no'.
TERMINAL
detection=on
Determines whether to use ioctl to establish the size of the
window you are using, for text wrapping.
defaultwidth=80
The width of output used when auto-detection support is not
available. Defaults to 80. If set to 0, it is interpreted as
infinite width, therefore with no word-wrapping; this is useful
when redirecting report output to a file for subsequent
handling.
defaultheight=24
The height of output used when auto-detection support is not
available. Defaults to 24. If set to 0, it is interpreted as
infinite height. This is useful when redirecting charts to a
file for subsequent handling.
avoidlastcolumn=no
Causes the width of the terminal minus one to be used as the
full width. This avoids placing color codes in the last column
which can cause problems for Cygwin users. Default value is
'no'.
hyphenate=on
Hyphenates lines when wrapping breaks occur mid-word. Default
value is 'on'.
editor=vi
Specifies which text editor you wish to use for when the task
edit <ID> command is used. Taskwarrior will first look for this
configuration variable. If found, it is used. Otherwise it will
look for the $VISUAL or $EDITOR environment variables, before it
defaults to using "vi".
reserved.lines=1
This is the number of lines reserved at the bottom of the screen
for the shell prompt. This is only referenced when 'limit:page'
is used.
MISCELLANEOUS
verbose=on|off|nothing|list...
When set to "on" (the default), helpful explanatory comments are
added to all output from Taskwarrior. Setting this to "off"
means that you would see regular output.
The special value "nothing" can be used to eliminate all
optional output, which results in only the formatted data being
shown, with nothing else. This output is most readily parsed and
used by shell scripts.
Alternatively, you can specify a comma-separated list of
verbosity tokens that control specific occasions when output is
generated. This list may contain:
blank Inserts extra blank lines in output, for clarity
header Messages that appear before report output
footnote Messages that appear after report output
label Column labels on tabular reports
new-id Provides feedback of any new task IDs
new-uuid Provides feedback of any new task UUIDs.
Deprecated, to be
merged with new-id.
affected Reports 'N tasks affected' and similar
edit Used the verbose template for the 'edit' command
special Feedback when applying special tags
project Feedback about project status changes
sync Feedback about sync
filter Shows the filter used in the command
unwait Notification when a task leaves the 'waiting'
state
recur Notification when a new recurring task instance
is created
"affected", "new-id", "new-uuid" "project" and "unwait" imply
"footnote".
Note that the "on" setting is equivalent to all the tokens being
specified, and the "nothing" setting is equivalent to none of
the tokens being specified.
Here are the shortcut equivalents:
verbose=on
verbose=blank,header,footnote,label,new-
id,affected,edit,special,project,sync,filter,unwait
verbose=off
verbose=blank,label,new-id,edit
verbose=nothing
verbose=
Those additional comments are sent to the standard error for
header, footnote and project. The others are sent to standard
output.
confirmation=yes
May be "yes" or "no", and determines whether Taskwarrior will
ask for confirmation before deleting a task or performing the
undo command. The default value is "yes". Consider leaving this
setting as "yes", for safety.
allow.empty.filter=yes
An empty filter combined with a write command is potentially a
way to modify all tasks by mistake, and when this is detected,
confirmation is required. Setting this to 'no' means that it is
an error to use a write command with no filter.
indent.annotation=2
Controls the number of spaces to indent annotations when shown
beneath the description field. The default value is "2".
indent.report=0
Controls the indentation of the entire report output. Default is
"0".
row.padding=0
Controls left and right padding around each row of the report
output. Default is "0".
column.padding=0
Controls padding between columns of the report output. Default
is "1".
bulk=3 Is a number, defaulting to 3. When this number or greater of
tasks are modified in a single command, confirmation will be
required, regardless of the value of confirmation variable. The
special value bulk=0 is treated as an infinity.
This is useful for preventing large-scale unintended changes.
nag=You have more urgent tasks.
This may be a string of text, or blank. It is used as a prompt
when a task is started of completed, when there are other tasks
with a higher urgency. Default value is: 'You have more urgent
tasks'. It is a gentle reminder that you are contradicting your
own urgency settings.
list.all.projects=no
May be yes or no, and determines whether the 'projects' command
lists all the project names you have used, or just the ones used
in active tasks. The default value is "no".
summary.all.projects=no
If set to yes, shows all projects in the summary report, even if
there are no pending tasks. The default value is "no".
complete.all.tags=yes
May be yes or no, and determines whether the tab completion
scripts consider all the tag names you have used, or just the
ones used in active tasks. The default value is "no".
list.all.tags=yes
May be yes or no, and determines whether the 'tags' command
lists all the tag names you have used, or just the ones used in
active tasks. The default value is "no".
print.empty.columns=no
May be yes or no, and determines whether columns with no data
for any task are printed. Defaults to no.
search.case.sensitive=yes
May be yes or no, and determines whether keyword lookup and
substitutions on the description and annotations are done in a
case sensitive way. Defaults to yes on most platforms. Defaults
to no on Cygwin due to older regex library problems with case-
insensitivity.
regex=on
Controls whether regular expression support is enabled. The
default value is on.
xterm.title=no
Sets the xterm window title when reports are run. Defaults to
off.
expressions=infix|postfix
Sets a preference for infix expressions (1 + 2) or postfix
expressions (1 2 +). Defaults to infix.
dom=on Enables or disables access to Taskwarrior internals and task
metadata on the command line. Defaults to on.
json.array=on
Determines whether the export command encloses the JSON output
in '[...]' and adds ',' after each exported task object to
create a properly-formed JSON array. With json.array=off,
export writes raw JSON objects to STDOUT, one per line.
Defaults to on.
json.depends.array=on
Determines whether the export command encodes dependencies as an
array of string UUIDs, or one comma-separated string. Defaults
to on.
_forcecolor=no
Taskwarrior shuts off color automatically when the output is not
sent directly to a TTY. For example, this command:
$ task list > file
will not use any color. To override this, use:
$ task rc._forcecolor=yes list > file
active.indicator=*
The character or string to show in the start.active column.
Defaults to *.
tag.indicator=+
The character or string to show in the tag.indicator column.
Defaults to +.
dependency.indicator=D
The character or string to show in the depends.indicator column.
Defaults to +.
uda.<name>.indicator=U
The character or string to show in the <uda>.indicator column.
Defaults to U.
recurrence=yes
Controls whether recurrence is enabled, and whether recurring
tasks continue to generate new task instances. Defaults to
'yes'.
recurrence.confirmation=prompt
Controls whether changes to recurring tasks propagates to other
child tasks with or without confirmation. A value of 'yes' means
propagate changes without confirmation. A value of 'no' means do
not propagate changes and don't ask for confirmation. A value of
'prompt' prompts you every time. Defaults to 'prompt'.
recurrence.indicator=R
The character or string to show in the recurrence_indicator
column. Defaults to R.
recurrence.limit=1
The number of future recurring tasks to show. Defaults to 1. For
example, if a weekly recurring task is added with a due date of
tomorrow, and recurrence.limit is set to 2, then a report will
list 2 pending recurring tasks, one for tomorrow, and one for a
week from tomorrow.
undo.style=side
When the 'undo' command is run, Taskwarrior presents a before
and after comparison of the data. This can be in either the
'side' style, which compares values side-by-side in a table, or
'diff' style, which uses a format similar to the 'diff' command.
burndown.bias=0.666
The burndown bias is a number that lies within the range 0 <=
bias <= 1. The bias is the fraction of the find/fix rates
derived from the short-term data (last 25% of the report) versus
the longer term data (last 50% of the report). A value of 0.666
(the default) means that the short-term rate has twice the
weight of the longer-term rate. The calculation is as follows:
rate = (long-term-rate * (1 - bias)) + (short-term-rate *
bias)
abbreviation.minimum=2
Minimum length of any abbreviated command/value. This means that
"ve", "ver", "vers", "versi", "versio" will all equate to
"version", but "v" will not. Default is 2.
debug=off
Taskwarrior has a debug mode that causes diagnostic output to be
displayed. Typically this is not something anyone would want,
but when reporting a bug, debug output can be useful. It can
also help explain how the command line is being parsed, but the
information is displayed in a developer-friendly, not a user-
friendly way.
Turning debug on automatically sets debug.hooks=1,
debug.parser=1 and debug.tls=2 if they do not already have
assigned values.
debug.hooks=0
Controls the hook system diagnostic level. Level 0 means no
diagnostics. Level 1 shows hook calls. Level 2 also shows exit
status and I/O.
debug.parser=0
Controls the parser diagnostic level. Level 0 shows no
diagnostics. Level 1 shows the final parse tree. Level 2 shows
the parse tree from all phases of the parse. Level 3 shows
expression evaluation details.
debug.tls=0
Controls the GnuTLS diagnostic level. For 'sync' debugging.
Level 0 means no diagnostics. Level 9 is the highest. Level 2 is
a good setting for debugging.
obfuscate=1
When set to '1', will replace all report text with 'xxx'. This
is useful for sharing report output in bug reports. Default
value is '0'.
alias.rm=delete
Taskwarrior supports command aliases. This alias provides an
alternate name (rm) for the delete command. You can use aliases
to provide alternate names for any of the commands. Several
commands you may use are actually aliases - the 'history'
report, for example, or 'export'.
DATES
dateformat=Y-M-D
dateformat.report=
dateformat.holiday=YMD
dateformat.edit=Y-M-D H:N:S
dateformat.info=Y-M-D H:N:S
dateformat.annotation=
report.X.dateformat=Y-M-D
This is a string of characters that defines how Taskwarrior
formats date values. The precedence order for the configuration
variable is report.X.dateformat then dateformat.report then
dateformat for formating the due dates in reports. If both
report.X.dateformat and dateformat.report are not set then
dateformat will be applied to the date. Entered dates as well as
all other displayed dates in reports are formatted according to
dateformat.
The default value is the ISO-8601 standard: Y-M-D. The string
can contain the characters:
m minimal-digit month, for example 1 or 12
d minimal-digit day, for example 1 or 30
y two-digit year, for example 09 or 12
D two-digit day, for example 01 or 30
M two-digit month, for example 01 or 12
Y four-digit year, for example 2009 or 2015
a short name of weekday, for example Mon or Wed
A long name of weekday, for example Monday or
Wednesday
b short name of month, for example Jan or Aug
B long name of month, for example January or August
v minimal-digit week, for example 3 or 37
V two-digit week, for example 03 or 37
h minimal-digit hour, for example 3 or 21
n minimal-digit minutes, for example 5 or 42
s minimal-digit seconds, for example 7 or 47
H two-digit hour, for example 03 or 21
N two-digit minutes, for example 05 or 42
S two-digit seconds, for example 07 or 47
J three-digit Julian day, for example 023 or 365
j Julian day, for example 23 or 365
The characters 'v', 'V', 'a' and 'A' can only be used for
formatting printed dates (not to parse them).
The string may also contain other characters to act as spacers,
or formatting. Examples for other values of dateformat:
d/m/Y would use for input and output 24/7/2009
yMD would use for input and output 090724
M-D-Y would use for input and output 07-24-2009
Examples for other values of dateformat.report:
a D b Y (V) would emit "Fri 24 Jul 2009 (30)"
A, B D, Y would emit "Friday, July 24, 2009"
wV a Y-M-D would emit "w30 Fri 2009-07-24"
yMD.HN would emit "110124.2342"
m/d/Y H:N would emit "1/24/2011 10:42"
a D b Y H:N:S would emit "Mon 24 Jan 2011 11:19:42"
Undefined fields are put to their minimal valid values (1 for
month and day and 0 for hour, minutes and seconds) when there is
at least one more global date field that is set. Otherwise, they
are set to the corresponding values of "now". For example:
8/1/2013 with m/d/Y implies August 1, 2013 at midnight
(inferred)
8/1 20:40 with m/d H:N implies August 1, 2013 (inferred)
at 20:40
date.iso=yes
Enables ISO-8601 date support. The default value is "yes".
weekstart=Sunday
Determines the day a week starts. Valid values are Sunday or
Monday only. The default value is "Sunday".
displayweeknumber=yes
Determines if week numbers are displayed when using the "task
calendar" command. The week number is dependent on the day a
week starts. The default value is "yes".
due=7 This is the number of days into the future that define when a
task is considered due, and is colored accordingly. The default
value is 7.
calendar.details=sparse
If set to full running "task calendar" will display the details
of tasks with due dates that fall into the calendar period. The
corresponding days will be color-coded in the calendar. If set
to sparse only the corresponding days will be color coded and no
details will be displayed. The displaying of due dates with
details is turned off by setting the variable to none. The
default value is "sparse".
calendar.details.report=list
The report to run when displaying the details of tasks with due
dates when running the "task calendar" command. The default
value is "list".
calendar.offset=off
If "on" the first month in the calendar report is effectively
changed by the offset value specified in calendar.offset.value.
It defaults to "off".
calendar.offset.value=-1
The offset value to apply to the first month in the calendar
report. The default value is "-1".
calendar.holidays=full
If set to full running "task calendar" will display holidays in
the calendar by color-coding the corresponding days. A detailed
list with the dates and names of the holidays is also shown. If
set to sparse only the days are color-coded and no details on
the holidays will be displayed. The displaying of holidays is
turned off by setting the variable to none. The default value is
"none".
calendar.legend=yes
Determines whether the calendar legend is displayed. The default
value is "yes".
JOURNAL ENTRIES
journal.time=no
May be yes or no, and determines whether the 'start' and 'stop'
commands should record an annotation when being executed. The
default value is "no". The text of the corresponding annotations
is controlled by:
journal.time.start.annotation=Started task
The text of the annotation that is recorded when executing the
start command and having set journal.time.
journal.time.stop.annotation=Stopped task
The text of the annotation that is recorded when executing the
stop command and having set journal.time.
journal.info=on
When enabled, this setting causes a change log of each task to
be displayed by the 'info' command. Default value is "on".
HOLIDAYS
Holidays are entered either directly in the .taskrc file or via an
include file that is specified in .taskrc. For each holiday the name
and the date is required to be given:
holiday.towel.name=Day of the towel
holiday.towel.date=20100525
holiday.sysadmin.name=System Administrator Appreciation
Day
holiday.sysadmin.date=20100730
Dates are to be entered according to the setting in the
dateformat.holiday variable.
The following holidays are computed automatically: Good Friday
(goodfriday), Easter (easter), Easter monday (eastermonday),
Ascension (ascension), Pentecost (pentecost). The date for these
holidays is the given keyword:
holiday.eastersunday.name=Easter
holiday.eastersunday.date=easter
Note that the Taskwarrior distribution contains example holiday files
that can be included like this:
include /usr/local/share/taskwarrior/rc/holidays.en-US.rc
monthsperline=3
Determines how many months the "task calendar" command renders
across the screen. Defaults to however many will fit. If more
months than will fit are specified, Taskwarrior will only show
as many that will fit.
DEPENDENCIES
dependency.reminder=on
Determines whether dependency chain violations generate
reminders.
dependency.confirmation=yes
Determines whether dependency chain repair requires
confirmation.
COLOR CONTROLS
color=on
May be "on" or "off". Determines whether Taskwarrior uses color.
When "off", will use dashes (-----) to underline column
headings.
fontunderline=on
Determines if font underlines or ASCII dashes should be used to
underline headers, even when color is enabled.
Taskwarrior has a number of coloration rules. They correspond to a
particular attribute of a task, such as it being due, or being active,
and specifies the automatic coloring of that task. A list of valid
colors, depending on your terminal, can be obtained by running the
command:
task color
Note that no default values are listed here - the defaults now
correspond to the dark-256.theme (Linux) and dark-16.theme
(other) theme values. The coloration rules are as follows:
color.due.today Task is due today
color.active Task is started, therefore active.
color.scheduled Task is scheduled, therefore ready for work.
color.until Task has an expiration date.
color.blocking Task is blocking another in a dependency.
color.blocked Task is blocked by a dependency.
color.overdue Task is overdue (due some time prior to now).
color.due Task is coming due.
color.project.none Task does not have an assigned project.
color.tag.none Task has no tags.
color.tagged Task has at least one tag.
color.recurring Task is recurring.
color.completed Task is completed.
color.deleted Task is deleted.
To disable a coloration rule for which there is a default, set
the value to nothing, for example:
color.tagged=
By default, colors produced by rules blend. This has the
advantage of conveying additional information, by producing
combinations that are not used by any particular rule directly.
However, color blending can produce highlighting combinations
which are not desired. In such cases, use the following option
to disable this behaviour:
rule.color.merge=yes
Can be "yes" or "no". When "no", disables merging of colors
produced by different color rules. Use if your color scheme
produces unpleasing foreground and background combinations.
See the task-color(5) man pages for color details.
Certain attributes like tags, projects and keywords can have their own
coloration rules.
color.tag.X=yellow
Colors any task that has the tag X.
color.project.X=on green
Colors any task assigned to project X.
color.keyword.X=on blue
Colors any task where the description or any annotation contains
X.
color.uda.X=on green
Colors any task that has the user defined attribute X.
color.uda.X.VALUE=on green
Colors any task that has the user defined attribute X set to
VALUE.
color.uda.X.none=on green
Colors any task that does not have the user defined attribute X.
color.error=green
Colors any of the error messages.
color.header=green
Colors any of the messages printed prior to the report output.
color.footnote=green
Colors any of the messages printed last.
color.summary.bar=on green
Colors the summary progress bar. Should consist of a background
color.
color.summary.background=on black
Colors the summary progress bar. Should consist of a background
color.
color.calendar.today=black on cyan
Color of today in calendar.
color.calendar.due=black on green
Color of days with due tasks in calendar.
color.calendar.due.today=black on magenta
Color of today with due tasks in calendar.
color.calendar.overdue=black on red
Color of days with overdue tasks in calendar.
color.calendar.weekend=bright white on black
Color of weekend days in calendar.
color.calendar.holiday=black on bright yellow
Color of holidays in calendar.
color.calendar.weeknumber=black on white
Color of weeknumbers in calendar.
color.label=
Colors the report labels. Defaults to not use color.
color.label.sort=
Colors the report labels for sort columns. Defaults to
color.label.
color.alternate=on rgb253
Color of alternate tasks. This is to apply a specific color to
every other task in a report, which can make it easier to
visually separate tasks. This is especially useful when tasks
are displayed over multiple lines due to long descriptions or
annotations.
color.history.add=on red
color.history.done=on green
color.history.delete=on yellow
Colors the bars on the ghistory report graphs. Defaults to red,
green and yellow bars.
color.burndown.pending=on red
color.burndown.started=on yellow
color.burndown.done=on green
Colors the bars on the burndown reports graphs. Defaults to red,
green and yellow bars.
color.undo.before=red
color.undo.after=green
Colors used by the undo command, to indicate the values both
before and after a change that is to be reverted.
color.sync.added=green
color.sync.changed=yellow
color.sync.rejected=red
Colors the output of the sync command.
rule.precedence.color=due.today,active,blocking,blocked,overdue,due,
scheduled,keyword.,project.,tag.,uda.,recurring,
pri.,tagged,completed,deleted
This setting specifies the precedence of the color rules, from
highest to lowest. Note that the prefix 'color.' is omitted (for
brevity), and that any wildcard value (color.tag.XXX) is
shortened to 'tag.', which places all specific tag rules at the
same precedence, again for brevity.
color.debug=green
Colors all debug output, if enabled.
URGENCY
The urgency calculation uses a polynomial with several terms, each of
which has a configurable coefficient. Those coefficients are:
urgency.blocking.coefficient=8.0
Urgency coefficient for blocking tasks
urgency.blocked.coefficient=-5.0
Urgency coefficient for blocked tasks
urgency.due.coefficient=12.0
Urgency coefficient for due dates
urgency.waiting.coefficient=-3.0
Urgency coefficient for waiting status
urgency.active.coefficient=4.0
Urgency coefficient for active tasks
urgency.scheduled.coefficient=5.0
Urgency coefficient for scheduled tasks
urgency.project.coefficient=1.0
Urgency coefficient for projects
urgency.tags.coefficient=1.0
Urgency coefficient for tags
urgency.annotations.coefficient=1.0
Urgency coefficient for annotations
urgency.age.coefficient=2.0
Urgency coefficient for the age of tasks
urgency.age.max=365
Maximum age in days. After this number of days has elapsed, the
urgency of a task won't increase any more because of aging.
urgency.user.tag.<tag>.coefficient=...
Specific tag coefficient.
urgency.user.tag.next.coefficient=15.0
Urgency coefficient for tag 'next'.
urgency.user.project.<project>.coefficient=...
Specific project coefficient.
urgency.user.keyword.<keyword>.coefficient=...
Specific description keyword coefficient.
urgency.uda.<name>.coefficient=...
Presence/absence of UDA data.
urgency.uda.<name>.<value>.coefficient=...
Specific value of UDA data.
The coefficients reflect the relative importance of the various terms
in the urgency calculation. These are default values, and may be
modified to suit your preferences, but it is important that you
carefully consider any modifications.
urgency.inherit=off
Not actually a coefficient. When enabled, blocking tasks inherit
the highest urgency value found in the tasks they block. This is
done recursively. It is recommended to set
urgency.blocking.coefficient and urgency.blocked.coefficient to
0.0 in order for this setting to be the most useful.
DEFAULTS
default.project=foo
Provides a default project name for the task add command, if you
don't specify one. The default is blank.
default.due=...
Provides a default due date for the task add command, if you
don't specify one. You can use a date, or a duration value which
is assumed to be relative to 'now'. The default is blank.
uda.<name>.default=...
Provides default values for UDA fields when using the task add
command, if you don't specify values. The default is blank.
default.command=next
Provides a default command that is run every time Taskwarrior is
invoked with no arguments. For example, if set to:
default.command=project:foo list
then Taskwarrior will run the "project:foo list" command if no
command is specified. This means that by merely typing
$ task
[task project:foo list]
ID Project Pri Description
1 foo H Design foo
2 foo Build foo
REPORTS
The reports can be customized by using the following configuration
variables. The output columns, their labels and the sort order can be
set using the corresponding variables for each report. Each report name
is used as a "command" name. For example
task overdue
report.X.description
The description for report X when running the "task help"
command.
report.X.columns
This is a comma-separated list of columns and formatting
specifiers. See the command 'task columns' for a full list of
options and examples.
report.X.labels
The labels for each column that will be used when generating
report X. The labels are a comma separated list.
report.X.sort
The sort order of the tasks in the generated report X. The sort
order is specified by using the column ids post-fixed by a "+"
for ascending sort order or a "-" for descending sort order. The
sort IDs are separated by commas. For example:
report.list.sort=due+,priority-,start.active-,project+
Additionally, after the "+" or "-", there can be a solidus "/"
which indicates that there are breaks after the column values
change. For example:
report.minimal.sort=project+/,description+
This sort order now specifies that there is a listing break
between each project. A listing break is simply a blank line,
which provides a visual grouping.
A special sort value of "none" indicates that no sorting is
required, and tasks will be presented in the order (if any) in
which they are selected.
report.X.filter
This adds a filter to the report X so that only tasks matching
the filter criteria are displayed in the generated report.
report.X.dateformat
This adds a dateformat to the report X that will be used by the
"due date" column. If it is not set then dateformat.report and
dateformat will be used in this order. See the DATES section for
details on the sequence placeholders.
report.X.annotations
This adds the possibility to control the output of annotations
for a task in a report. Deprecated. Use the description column
with a format (e.g., description.count) instead.
Taskwarrior comes with a number of predefined reports, which are:
next Lists the most important tasks.
long Lists all pending tasks and all data, matching the specified
criteria.
list Lists all tasks matching the specified criteria.
ls Short listing of all tasks matching the specified criteria.
minimal
Minimal listing of all tasks matching the specified criteria.
newest Shows the newest tasks.
oldest Shows the oldest tasks.
overdue
Lists overdue tasks matching the specified criteria.
active Lists active tasks matching the specified criteria.
completed
Lists completed tasks matching the specified criteria.
recurring
Lists recurring tasks matching the specified criteria.
waiting
Lists all waiting tasks matching the specified criteria.
all Lists all tasks matching the specified criteria.
blocked
Lists all tasks that have dependencies.
USER DEFINED ATTRIBUTES
User defined attributes (UDAs) are an extension mechanism that allows
you to define new attributes for Taskwarrior to store and display. One
such example is an 'estimate' attribute that could be used to store
time estimates associated with a task. This 'estimate' attribute is not
built in to Taskwarrior, but with a few simple configuration settings
you can instruct Taskwarrior to store this item, and provide access to
it for custom reports and filters.
This allows you to augment Taskwarrior to accommodate your workflow, or
bend the rules and use Taskwarrior to store and synch data that is not
necessarily task-related.
One important restriction is that because this is an open system that
allows the definition of any new attribute, Taskwarrior cannot
understand the meaning of that attribute. So while Taskwarrior will
faithfully store, modify, report, sort and filter your UDA, it does not
understand anything about it. For example if you define a UDA named
'estimate', Taskwarrior will not know that this value is weeks, hours,
minutes, money, or some other resource count.
uda.<name>.type=string|numeric|date|duration
Defines a UDA called '<name>', of the specified type.
uda.<name>.label=<column heading>
Provides a default report label for the UDA called '<name>'.
uda.<name>.values=A,B,C
For type 'string' UDAs only, this provides a comma-separated
list of acceptable values. In this example, the '<name>' UDA may
only contain values 'A', 'B', or 'C', but may also contain no
value.
Note that the order of the value is important, and denotes the
sort order from highest ('A') to lowest ('C').
Note that a blank value is permitted.
uda.<name>.default=...
Provides a default value for the UDA called '<name>'.
Example 'estimate' UDA
This example shows an 'estimate' UDA that stores specific values
for the size of a task. Note the blank value after 'trivial'.
uda.estimate.type=string
uda.estimate.label=Size Estimate
uda.estimate.values=huge,large,medium,small,trivial,
Note that the value are sorted
huge > large > medium > small > trivial > ''
CONTEXT
Context setting is a mechanism which allows the user to set a permanent
filter, thus avoiding the need to specify one filter repeatedly. More
details on usage can be found in the task(1) man page.
The current context is stored in the .taskrc file, along with
definitions for all user provided contexts.
context=<name>
Stores the value of the currently active context.
context.<name>=<filter>
Stores the definition of the context with the name <name>.
SYNC
These configuration settings are used to connect and sync tasks with
the task server.
taskd.server=<host>:<port>
Specifies the hostname and port of the Taskserver. Hostname may
be an IPv4 or IPv6 address, or domain. Port is an integer.
taskd.credentials=<organization>/<user>/<key>
User identification for the Taskserver, which includes a private
key.
taskd.certificate=<path>
Specifies the path to the client certificate used for
identification with the Taskserver.
taskd.key=<path>
Specifies the path to the client key used for encrypted
communication with the Taskserver.
taskd.ca=<path>
Specifies the path to the CA certificate in the event that your
Taskserver is using a self-signed certificate. Optional.
taskd.trust=strict|ignore hostname|allow all
This settings allows you to override the trust level when server
certificates are validated. With "allow all", the server
certificate is trusted automatically. With "ignore hostname",
the server certificate is verified but the hostname is ignored.
With "strict", the server certificate is verified. Default is
"strict", which requires full validation.
taskd.ciphers=NORMAL
Override of the cipher selection. The set of ciphers used by TLS
may be controlled by both server and client. There must be some
overlap between client and server supported ciphers, or
communication cannot occur. Default is "NORMAL". See GnuTLS
documentation for full details.
CREDITS & COPYRIGHTS
Copyright (C) 2006 - 2015 P. Beckingham, F. Hernandez.
This man page was originally written by Federico Hernandez.
Taskwarrior is distributed under the MIT license. See
http://www.opensource.org/licenses/mit-license.php for more
information.
SEE ALSO
task(1), task-color(5), task-sync(5)
For more information regarding Taskwarrior, see the following:
The official site at
<http://taskwarrior.org>
The official code repository at
<https://git.tasktools.org/scm/tm/task.git>
You can contact the project by emailing
<support@taskwarrior.org>
REPORTING BUGS
Bugs in Taskwarrior may be reported to the issue-tracker at
<http://taskwarrior.org>
task 2.5.0 2015-10-21 taskrc(5)