DragonFly On-Line Manual Pages

TRACEREPLAY(1)                   User Commands                  TRACEREPLAY(1)

NAME
       tracereplay - Replay a trace in trace time from one uri to another

SYNOPSIS
       tracereplay [-b | --broadcast] [-s --snaplength [ snaplength] ] [-f |
       --filter [ filter string ] ] inputuri outputuri

DESCRPTION
       tracereplay replays inputuri to outputuri in trace time. Checksums are
       recomputed on the fly.

       -b
       --broadcast

              Change the 802.3 (ethernet) destination address to the broadcast
              address.  This will send the transmitted packets to any hosts on
              the local network.

       -s[snaplength]
       --snaplength[snaplength]
              Truncate the packets to the length specified. This only makes a
              difference if the inputuri is a capture device. The value should
              be > 0. Inappropriate values will be ignored, but a warning will
              be printed.

       -f[filterstring]
       --filter[filter]
              Apply a filter to the inputuri.

LINKS
       More details about tracereplay (and libtrace) can be found at
       http://www.wand.net.nz/trac/libtrace/wiki/UserDocumentation

SEE ALSO
       libtrace(3), tracesplit(1), tracesplit_dir(1), tracefilter(1),
       tracemerge(1), traceconvert(1), tracereport(1), tracertstats(1),
       tracestats(1), tracepktdump(1), traceanon(1), tracesummary(1),
       tracediff(1), traceends(1), tracetopends(1)

AUTHORS
       Andreas Loef <andreas.lof@cs.waikato.ac.nz>, Yuwei Wang
       <yww4@cs.waikato.ac.nz>

tracereplay (libtrace)           November 2009                  TRACEREPLAY(1)