DragonFly On-Line Manual Pages

font(3) Allegro manual font(3)

NAME
font - A simple 8x8 fixed size font. Allegro game programming library.

SYNOPSIS
#include <allegro.h>

extern FONT *font;

DESCRIPTION
A simple 8x8 fixed size font (the mode 13h BIOS default). If you want
to alter the font used by the GUI routines, change this to point to one
of your own fonts. This font contains the standard ASCII (U+20 to
U+7F), Latin-1 (U+A1 to U+FF), and Latin Extended-A (U+0100 to U+017F)
character ranges.

SEE ALSO
textout_ex(3), textprintf_ex(3)

Allegro version 4.4.2 font(3)
font(n) Tk Built-In Commands font(n)

______________________________________________________________________________

NAME
font - Create and inspect fonts.

SYNOPSIS
font option ?arg arg ...?
______________________________________________________________________________

DESCRIPTION
The font command provides several facilities for dealing with fonts,
such as defining named fonts and inspecting the actual attributes of a
font. The command has several different forms, determined by the first
argument. The following forms are currently supported:

font actual font ?-displayof window? ?option? ?--? ?char?
Returns information about the actual attributes that are
obtained when font is used on window's display; the actual
attributes obtained may differ from the attributes requested due
to platform-dependent limitations, such as the availability of
font families and point sizes. font is a font description; see
FONT DESCRIPTIONS below. If the window argument is omitted, it
defaults to the main window. If option is specified, returns
the value of that attribute; if it is omitted, the return value
is a list of all the attributes and their values. See FONT
OPTIONS below for a list of the possible attributes. If the
char argument is supplied, it must be a single character. The
font attributes returned will be those of the specific font used
to render that character, which will be different from the base
font if the base font does not contain the given character. If
char may be a hyphen, it should be preceded by -- to distinguish
it from a misspelled option.

font configure fontname ?option? ?value option value ...?
Query or modify the desired attributes for the named font called
fontname. If no option is specified, returns a list describing
all the options and their values for fontname. If a single
option is specified with no value, then returns the current
value of that attribute. If one or more option-value pairs are
specified, then the command modifies the given named font to
have the given values; in this case, all widgets using that font
will redisplay themselves using the new attributes for the font.
See FONT OPTIONS below for a list of the possible attributes.

Note that on Aqua/Mac OS X, the system fonts (see PLATFORM
SPECIFIC FONTS below) may not be actually altered because they
are implemented by the system theme. To achieve the effect of
modification, use font actual to get their configuration and
font create to synthesize a copy of the font which can be
modified.

font create ?fontname? ?option value ...?
Creates a new named font and returns its name. fontname
specifies the name for the font; if it is omitted, then Tk
generates a new name of the form fontx, where x is an integer.
There may be any number of option-value pairs, which provide the
desired attributes for the new named font. See FONT OPTIONS
below for a list of the possible attributes.

font delete fontname ?fontname ...?
Delete the specified named fonts. If there are widgets using
the named font, the named font will not actually be deleted
until all the instances are released. Those widgets will
continue to display using the last known values for the named
font. If a deleted named font is subsequently recreated with
another call to font create, the widgets will use the new named
font and redisplay themselves using the new attributes of that
font.

font families ?-displayof window?
The return value is a list of the case-insensitive names of all
font families that exist on window's display. If the window
argument is omitted, it defaults to the main window.

font measure font ?-displayof window? text
Measures the amount of space the string text would use in the
given font when displayed in window. font is a font
description; see FONT DESCRIPTIONS below. If the window
argument is omitted, it defaults to the main window. The return
value is the total width in pixels of text, not including the
extra pixels used by highly exaggerated characters such as
cursive "f". If the string contains newlines or tabs, those
characters are not expanded or treated specially when measuring
the string.

font metrics font ?-displayof window? ?option?
Returns information about the metrics (the font-specific data),
for font when it is used on window's display. font is a font
description; see FONT DESCRIPTIONS below. If the window
argument is omitted, it defaults to the main window. If option
is specified, returns the value of that metric; if it is
omitted, the return value is a list of all the metrics and their
values. See FONT METRICS below for a list of the possible
metrics.

font names
The return value is a list of all the named fonts that are
currently defined.

FONT DESCRIPTIONS
The following formats are accepted as a font description anywhere font
is specified as an argument above; these same forms are also permitted
when specifying the -font option for widgets.

[1] fontname
The name of a named font, created using the font create command.
When a widget uses a named font, it is guaranteed that this will
never cause an error, as long as the named font exists, no
matter what potentially invalid or meaningless set of attributes
the named font has. If the named font cannot be displayed with
exactly the specified attributes, some other close font will be
substituted automatically.

[2] systemfont
The platform-specific name of a font, interpreted by the
graphics server. This also includes, under X, an XLFD (see [4])
for which a single "*" character was used to elide more than one
field in the middle of the name. See PLATFORM SPECIFIC FONTS
for a list of the system fonts.

[3] family ?size? ?style? ?style ...?
A properly formed list whose first element is the desired font
family and whose optional second element is the desired size.
The interpretation of the size attribute follows the same rules
described for -size in FONT OPTIONS below. Any additional
optional arguments following the size are font styles. Possible
values for the style arguments are as follows:

normal bold roman italic
underline overstrike

[4] X-font names (XLFD)
A Unix-centric font name of the form
-foundry-family-weight-slant-setwidth-addstyle-pixel-point-resx-resy-spacing-width-charset-encoding.
The "*" character may be used to skip individual fields that the
user does not care about. There must be exactly one "*" for
each field skipped, except that a "*" at the end of the XLFD
skips any remaining fields; the shortest valid XLFD is simply
"*", signifying all fields as defaults. Any fields that were
skipped are given default values. For compatibility, an XLFD
always chooses a font of the specified pixel size (not point
size); although this interpretation is not strictly correct, all
existing applications using XLFDs assumed that one "point" was
in fact one pixel and would display incorrectly (generally
larger) if the correct size font were actually used.

[5] option value ?option value ...?
A properly formed list of option-value pairs that specify the
desired attributes of the font, in the same format used when
defining a named font; see FONT OPTIONS below.

When font description font is used, the system attempts to parse the
description according to each of the above five rules, in the order
specified. Cases [1] and [2] must match the name of an existing named
font or of a system font. Cases [3], [4], and [5] are accepted on all
platforms and the closest available font will be used. In some
situations it may not be possible to find any close font (e.g., the
font family was a garbage value); in that case, some system-dependent
default font is chosen. If the font description does not match any of
the above patterns, an error is generated.

FONT METRICS
The following options are used by the font metrics command to query
font-specific data determined when the font was created. These
properties are for the whole font itself and not for individual
characters drawn in that font. In the following definitions, the
"baseline" of a font is the horizontal line where the bottom of most
letters line up; certain letters, such as lower-case "g" stick below
the baseline.

-ascent
The amount in pixels that the tallest letter sticks up above the
baseline of the font, plus any extra blank space added by the
designer of the font.

-descent
The largest amount in pixels that any letter sticks down below
the baseline of the font, plus any extra blank space added by
the designer of the font.

-linespace
Returns how far apart vertically in pixels two lines of text
using the same font should be placed so that none of the
characters in one line overlap any of the characters in the
other line. This is generally the sum of the ascent above the
baseline line plus the descent below the baseline.

-fixed
Returns a boolean flag that is "1" if this is a fixed-width
font, where each normal character is the same width as all the
other characters, or is "0" if this is a proportionally-spaced
font, where individual characters have different widths. The
widths of control characters, tab characters, and other non-
printing characters are not included when calculating this
value.

FONT OPTIONS
The following options are supported on all platforms, and are used when
constructing a named font or when specifying a font using style [5] as
above:

-family name
The case-insensitive font family name. Tk guarantees to support
the font families named Courier (a monospaced "typewriter"
font), Times (a serifed "newspaper" font), and Helvetica (a
sans-serif "European" font). The most closely matching native
font family will automatically be substituted when one of the
above font families is used. The name may also be the name of a
native, platform-specific font family; in that case it will work
as desired on one platform but may not display correctly on
other platforms. If the family is unspecified or unrecognized,
a platform-specific default font will be chosen.

-size size
The desired size of the font. If the size argument is a
positive number, it is interpreted as a size in points. If size
is a negative number, its absolute value is interpreted as a
size in pixels. If a font cannot be displayed at the specified
size, a nearby size will be chosen. If size is unspecified or
zero, a platform-dependent default size will be chosen.

Sizes should normally be specified in points so the application
will remain the same ruler size on the screen, even when
changing screen resolutions or moving scripts across platforms.
However, specifying pixels is useful in certain circumstances
such as when a piece of text must line up with respect to a
fixed-size bitmap. The mapping between points and pixels is set
when the application starts, based on properties of the
installed monitor, but it can be overridden by calling the tk
scaling command.

-weight weight
The nominal thickness of the characters in the font. The value
normal specifies a normal weight font, while bold specifies a
bold font. The closest available weight to the one specified
will be chosen. The default weight is normal.

-slant slant
The amount the characters in the font are slanted away from the
vertical. Valid values for slant are roman and italic. A roman
font is the normal, upright appearance of a font, while an
italic font is one that is tilted some number of degrees from
upright. The closest available slant to the one specified will
be chosen. The default slant is roman.

-underline boolean
The value is a boolean flag that specifies whether characters in
this font should be underlined. The default value for underline
is false.

-overstrike boolean
The value is a boolean flag that specifies whether a horizontal
line should be drawn through the middle of characters in this
font. The default value for overstrike is false.

STANDARD FONTS
The following named fonts are supported on all systems, and default to
values that match appropriate system defaults.

TkDefaultFont
This font is the default for all GUI items not otherwise
specified.

TkTextFont
This font should be used for user text in entry widgets,
listboxes etc.

TkFixedFont
This font is the standard fixed-width font.

TkMenuFont
This font is used for menu items.

TkHeadingFont
This font should be used for column headings in lists and
tables.

TkCaptionFont
This font should be used for window and dialog caption bars.

TkSmallCaptionFont
This font should be used for captions on contained windows or
tool dialogs.

TkIconFont
This font should be used for icon captions.

TkTooltipFont
This font should be used for tooltip windows (transient
information windows).

It is not advised to change these fonts, as they may be modified by Tk
itself in response to system changes. Instead, make a copy of the font
and modify that.

PLATFORM SPECIFIC FONTS
The following system fonts are supported:

X Windows
All valid X font names, including those listed by xlsfonts(1),
are available.

MS Windows
The following fonts are supported, and are mapped to the user's
style defaults.

system ansi device
systemfixed ansifixed oemfixed

Mac OS X
The following fonts are supported, and are mapped to the user's
style defaults.

system application menu

Additionally, the following named fonts provide access to the
Aqua theme fonts:

systemSystemFont systemEmphasizedSystemFont
systemSmallSystemFontsystemSmallEmphasizedSystemFont
systemApplicationFontsystemLabelFont
systemViewsFont systemMenuTitleFont
systemMenuItemFont systemMenuItemMarkFont
systemMenuItemCmdKeyFontsystemWindowTitleFont
systemPushButtonFontsystemUtilityWindowTitleFont
systemAlertHeaderFontsystemToolbarFont
systemMiniSystemFontsystemDetailSystemFont
systemDetailEmphasizedSystemFont

EXAMPLE
Fill a text widget with lots of font demonstrators, one for every font
family installed on your system:
pack [text .t -wrap none] -fill both -expand 1
set count 0
set tabwidth 0
foreach family [lsort -dictionary [font families]] {
.t tag configure f[incr count] -font [list $family 10]
.t insert end ${family}:\t {} \
"This is a simple sampler\n" f$count
set w [font measure [.t cget -font] ${family}:]
if {$w+5 > $tabwidth} {
set tabwidth [expr {$w+5}]
.t configure -tabs $tabwidth
}
}

DragonFly On-Line Manual Pages

NAME

SYNOPSIS

DESCRIPTION

SEE ALSO

NAME

SYNOPSIS

DESCRIPTION

FONT DESCRIPTIONS

FONT METRICS

FONT OPTIONS

STANDARD FONTS

PLATFORM SPECIFIC FONTS

EXAMPLE

SEE ALSO

KEYWORDS