DragonFly On-Line Manual Pages

Search: Section:  


XCB(1)                 DragonFly General Commands Manual                XCB(1)

NAME

xcb - X Cut Buffers - Pigeon holes for your cut and paste selections.

SYNOPSIS

xcb [Xt option] [-l layout] [-n count] [-p|-s|-S list] [-r count]

DESCRIPTION

Xcb provides easy access to the cut buffers built into every X server. It allows the buffers to be manipulated either via the command line, or with the mouse in a point and click manner. The buffers can be used as holding pens to store and retrieve arbitrary data fragments. Any number of cut buffers may be created, so any number of different pieces of data can be saved and recalled later. By default, 8 cut buffers are created. The program is designed primarily for use with textual data. Xcb has two modes of operation. Normally xcb provides an array of windows on your display, one per cut buffer, tiled horizontally, vertically, or in some user specified layout. Each window displays the contents of its respective cut buffer. Data can be cut from and pasted to the windows in a similar manner to xterm. The buffers can also be rotated. In task mode, xcb lets you access the cut buffers from the command line. Cut buffers can be loaded from stdin, copied or concatenated to stdout, loaded using the current PRIMARY selection, or rotated an arbitrary number of positions. In this mode of operation, xcb performs the requested task and then exits. It does not create any windows and has no interaction with the mouse or keyboard.

OPTIONS

Xcb supports the full set of X Toolkit Intrinsics options, as well as those listed below. Xcb options can appear in any order. The presence of the -p, -r, -s or -S options causes xcb to execute in task mode, described above. -l layout This option controls the geometry arrangement of xcb's subwindows. It is the command line equivalent of the .layout resource, described below. -n count Create count cut buffers. Count can be any integer greater than zero. This option is the command line equivalent of the .bufferCount resource, described below. -u Use utf-8 instead of the current locale settings when executing in task mode and doing I/O. -V Print the xcb release version number and exit immediately. -p list Print the contents of the listed buffer(s) on stdout. The buffered data is printed exactly as it is stored in the server. Selecting two or more buffers has the effect of concatenating the data on stdout. The cut buffers are numbered from 0... onwards. The list can be either a single digit, a comma separated list of digits, a range of the form m-n, or some combination of lists and ranges. The buffers are printed in listed order, so repeated numbers in the list can be used to duplicate buffer contents. -r count Rotate the buffers by count positions. Count can be any integer, positive or negative. This option may be used in conjunction with the -n count option to rotate a specific number of buffers. If the -n option is not used, xcb will rotate the number of buffers given by the .bufferCount resource. -s list Store the data from stdin in the listed buffer(s). If the list refers to two or more buffers, the input data is duplicated in each buffer. Refer to the -p option for the definition of a list. -S list Store the current PRIMARY selection data in the listed buffer(s). The data is converted to a string representation. If the list refers to two or more buffers, the PRIMARY selection is duplicated in each buffer. Refer to the -p option for the definition of a list. Under the -S option xcb waits for the nominated cut buffer's contents to change before exiting. If no change is detected within 3 seconds, xcb exits with a non-zero return code. WIDGETS and RESOURCES The xcb widget hierarchy consists of a collection of custom buffer widgets, one per cut buffer. In the Athena version of the program, these buffer widgets are all contained within a single Athena form widget. In the Motif version of the program, they are each enclosed by Motif frame widgets, and the frame widgets are all contained within a single Motif RowColumn widget. The names of the buffer widgets are "buffer0", "buffer1", "buffer2", .... etc., and their class name is "Buffer". Each buffer widget supports all the standard core widget resources, plus the .foreground and .fontSet resources. Application wide resources are as follows: .bufferCount (default value 8) This is the number of buffer widgets to create. Any number of widgets (greater than zero) can be created. .layout (default value "h") Only the first character of the resource value is significant. This is the geometry arrangement to apply in the container widget. The layout can be "h" (horizontal), "v" (vertical), or some other value to disable the inbuilt geometry code and specify the layout via your X resources. An example is provided in the application default resources file. EVENTS and TRANSLATIONS Xcb's input semantics are coded into a Toolkit translation table. The default bindings have been chosen to conform with the default configuration of other cut and paste clients, such as xterm. The bindings may be altered or overridden according to your needs. The actions functions provided by xcb are:- cut() causes the contents of the chosen cut buffer to become the PRIMARY selection. The window contents, if any, are highlighted, and can then be pasted into other cut buffers or applications. paste() causes the value of the PRIMARY selection to be converted into text and pasted into the chosen cut buffer, overwriting any previous buffer contents. If no PRIMARY selection is present, xcb pastes the contents of cut buffer zero into the chosen buffer. clear() clears the chosen cut buffer. rotate(NN) rotates the cut buffers by NN positions. NN may be any positive or negative number. refresh() causes the cut buffer window to be cleared and redrawn. selreq() this action function handles paste requests from other clients, or other xcb windows. It should always be bound to SelectionRequest events. selclear() this action function responds to the loss of ownership of the PRIMARY selection property. It should always be bound to SelectionClear events. quit() causes xcb to terminate. The default bindings are as follows:- <Btn1Down>: cut() \n\ Shift <Btn2Down>: clear() \n\ <Btn2Down>: paste() \n\ Shift <Btn3Down>: rotate(-1) \n\ <Btn3Down>: rotate(1) \n\ <Key>Left: rotate(-1) \n\ <Key>Right: rotate(1) \n\ <Key>Up: rotate(-1) \n\ <Key>Down: rotate(1) \n\ <Key>q: quit() \n\ <SelReq>: selreq() \n\ <SelClr>: selclear()

EXAMPLES

The following are some examples of xcb task mode usage:- xcb -s 0-7 < /dev/null This clears the first 8 cut buffers in your server. echo "G'day." | xcb -display bigears:0.0 -s 1,3,5,7 This loads the string "G'day." into four of the cut buffers on the display "bigears". xsendevent -win buffer5 '<Btn1Down>' This uses the program xsendevent to send a synthetic mouse click event to an xcb subwindow, thereby making that window the owner of the PRIMARY selection. ls `xcb -p 2,3` This produces a listing of all the files named in cut buffers 2 and 3. xcb -p 0-7 | xcb -s 0 This concatenates the values in the first 8 cut buffers, and places the result back in cut buffer zero. xcb -S 0 && xcb -p 0 The first command copies the current PRIMARY selection into the first cut buffer. If the copy succeeds, then the second command prints that data on stdout. for i in 0 1 2 3 4 5 6 7 do xcb -p $i > $HOME/.xcb/$i done for i in 0 1 2 3 4 5 6 7 do xcb -s $i < $HOME/.xcb/$i done This first loop saves the contents of each of the cut buffers in a separate file under your home directory. The second loop restores the cut buffer contents from those files. When placed in your .logout and .login scripts respectively, the commands are a simple method of preserving your cut buffers across login sessions. function g { echo "$1\\c" | xcb -s 7 grep "$@" } function vg { vi +/`xcb -p 7` "$@" } These two shell functions exemplify a simple mechanism for saving and reusing regular expressions. The first function saves the regex used for grep-ing into cut buffer 7. The second function reuses the most recent grep regex as a search command in vi. There is considerable scope for expanding and improving these ideas.

SEE ALSO

xterm(1), xcutsel(1), xclipboard(1), xprop(1) Athena Widget Set - C Language Interface Motif Programmers Reference Guide

AUTHORS

Current Maintainer (I18n version) Marc Lehmann E-mail: pcg@goof.com Original Author Farrell McKay E-mail: Farrell.McKay@mpx.com.au XView modifications provided by Danny Vanderryn E-mail: dvanderr@us.oracle.com

COPYRIGHT

Copyright (C) 1992,1993,1994 by Farrell McKay. Permission to use, copy, modify, and distribute this software and its documentation for any purpose and without fee is hereby granted, provided that the above copyright notice appears in all copies and that both that copyright notice and this permission notice appear in supporting documentation. This software is provided "as is" without express or implied warranty. BUGS :-) Xlib's underlying protocol for moving selection data between client and server can sometimes be slow, depending on the amount of data involved. Do not expect fast performance if your selections are big or you want to store big files in your cut buffers! ("big" means, say, over 10k bytes - but your mileage may vary). X Version 11 Oct 6 1994 XCB(1) xcb_res_query_resource_bytes(3) XCB Requests xcb_res_query_resource_bytes(3)

NAME

xcb_res_query_resource_bytes -

SYNOPSIS

#include <xcb/res.h> Request function xcb_res_query_resource_bytes_cookie_t xcb_res_query_resource_bytes(xcb_connection_t *conn, uint32_t client, uint32_t num_specs, const xcb_res_resource_id_spec_t *specs); Reply datastructure typedef struct xcb_res_query_resource_bytes_reply_t { uint8_t response_type; uint8_t pad0; uint16_t sequence; uint32_t length; uint32_t num_sizes; uint8_t pad1[20]; } xcb_res_query_resource_bytes_reply_t; Reply function xcb_res_query_resource_bytes_reply_t *xcb_res_query_resource_bytes_reply(xcb_connection_t *conn, xcb_res_query_resource_bytes_cookie_t cookie, xcb_generic_error_t **e); Reply accessors int xcb_res_query_resource_bytes_sizes_length(const xcb_res_query_resource_bytes_reply_t *reply); xcb_res_resource_size_value_iterator_t xcb_res_query_resource_bytes_sizes_iterator(const xcb_res_query_resource_bytes_reply_t *reply);

REQUEST ARGUMENTS

conn The XCB connection to X11. client TODO: NOT YET DOCUMENTED. num_specs TODO: NOT YET DOCUMENTED. specs TODO: NOT YET DOCUMENTED.

REPLY FIELDS

response_type The type of this reply, in this case XCB_RES_QUERY_RESOURCE_BYTES. This field is also present in the xcb_generic_reply_t and can be used to tell replies apart from each other. sequence The sequence number of the last request processed by the X11 server. length The length of the reply, in words (a word is 4 bytes). num_sizes TODO: NOT YET DOCUMENTED.

DESCRIPTION

RETURN VALUE

Returns an xcb_res_query_resource_bytes_cookie_t. Errors have to be handled when calling the reply function xcb_res_query_resource_bytes_reply. If you want to handle errors in the event loop instead, use xcb_res_query_resource_bytes_unchecked. See xcb-requests(3) for details.

ERRORS

This request does never generate any errors.

SEE ALSO

AUTHOR

Generated from res.xml. Contact xcb@lists.freedesktop.org for corrections and improvements. X Version 11 libxcb 1.15 xcb_res_query_resource_bytes(3)

Search: Section: