DragonFly On-Line Manual Pages

Search: Section:  


XXHSUM(1)                        User Commands                       XXHSUM(1)

NAME

xxhsum - print or check xxHash non-cryptographic checksums

SYNOPSIS

xxhsum [<OPTION>] ... [<FILE>] ... xxhsum -b [<OPTION>] ... xxh32sum is equivalent to xxhsum -H0 xxh64sum is equivalent to xxhsum -H1 xxh128sum is equivalent to xxhsum -H2

DESCRIPTION

Print or check xxHash (32, 64 or 128 bits) checksums. When no FILE, read standard input, except if it's the console. When FILE is -, read standard input even if it's the console. xxhsum supports a command line syntax similar but not identical to md5sum(1). Differences are: xxhsum doesn't have text/binary mode switch (-b, -t); xxhsum always treats files as binary file; xxhsum has a hash bit width switch (-H); As xxHash is a fast non-cryptographic checksum algorithm, xxhsum should not be used for security related purposes. xxhsum -b invokes benchmark mode. See OPTIONS and EXAMPLES for details.

OPTIONS

-V, --version Displays xxhsum version and exits -HHASHTYPE Hash selection. HASHTYPE means 0=32bits, 1=64bits, 2=128bits. Alternatively, HASHTYPE 32=32bits, 64=64bits, 128=128bits. Default value is 1 (64bits) --tag Output in the BSD style. --little-endian Set output hexadecimal checksum value as little endian convention. By default, value is displayed as big endian. -h, --help Displays help and exits The following four options are useful only when verifying checksums (-c) -c, --check FILE Read xxHash sums from FILE and check them -q, --quiet Don't print OK for each successfully verified file --strict Return an error code if any line in the file is invalid, not just if some checksums are wrong. This policy is disabled by default, though UI will prompt an informational message if any line in the file is detected invalid. --status Don't output anything. Status code shows success. -w, --warn Emit a warning message about each improperly formatted checksum line. The following options are useful only benchmark purpose -b Benchmark mode. See EXAMPLES for details. -b# Specify ID of variant to be tested. Multiple variants can be selected, separated by a ',' comma. -BBLOCKSIZE Only useful for benchmark mode (-b). See EXAMPLES for details. BLOCKSIZE specifies benchmark mode's test data block size in bytes. Default value is 102400 -iITERATIONS Only useful for benchmark mode (-b). See EXAMPLES for details. ITERATIONS specifies number of iterations in benchmark. Single iteration lasts approximately 1000 milliseconds. Default value is 3

EXIT STATUS

xxhsum exit 0 on success, 1 if at least one file couldn't be read or doesn't have the same checksum as the -c option.

EXAMPLES

Output xxHash (64bit) checksum values of specific files to standard output $ xxhsum -H1 foo bar baz Output xxHash (32bit and 64bit) checksum values of specific files to standard output, and redirect it to xyz.xxh32 and qux.xxh64 $ xxhsum -H0 foo bar baz > xyz.xxh32 $ xxhsum -H1 foo bar baz > qux.xxh64 Read xxHash sums from specific files and check them $ xxhsum -c xyz.xxh32 qux.xxh64 Benchmark xxHash algorithm. By default, xxhsum benchmarks xxHash main variants on a synthetic sample of 100 KB, and print results into standard output. The first column is the algorithm, the second column is the source data size in bytes, the third column is the number of hashes generated per second (throughput), and finally the last column translates speed in megabytes per second. $ xxhsum -b In the following example, the sample to hash is set to 16384 bytes, the variants to be benched are selected by their IDs, and each benchmark test is repeated 10 times, for increased accuracy. $ xxhsum -b1,2,3 -i10 -B16384

BUGS

Report bugs at: https://github.com/Cyan4973/xxHash/issues/

AUTHOR

Yann Collet

SEE ALSO

md5sum(1) xxhsum 0.7.4 July 2020 XXHSUM(1) XXHSUM(1) User Commands XXHSUM(1)

NAME

xxhsum - print or check xxHash non-cryptographic checksums

SYNOPSIS

xxhsum [<OPTION>] ... [<FILE>] ... xxhsum -b [<OPTION>] ... xxh32sum is equivalent to xxhsum -H0 xxh64sum is equivalent to xxhsum -H1 xxh128sum is equivalent to xxhsum -H2

DESCRIPTION

Print or check xxHash (32, 64 or 128 bits) checksums. When no FILE, read standard input, except if it's the console. When FILE is -, read standard input even if it's the console. xxhsum supports a command line syntax similar but not identical to md5sum(1). Differences are: xxhsum doesn't have text/binary mode switch (-b, -t); xxhsum always treats files as binary file; xxhsum has a hash bit width switch (-H); As xxHash is a fast non-cryptographic checksum algorithm, xxhsum should not be used for security related purposes. xxhsum -b invokes benchmark mode. See OPTIONS and EXAMPLES for details.

OPTIONS

-V, --version Displays xxhsum version and exits -HHASHTYPE Hash selection. HASHTYPE means 0=32bits, 1=64bits, 2=128bits. Alternatively, HASHTYPE 32=32bits, 64=64bits, 128=128bits. Default value is 1 (64bits) --tag Output in the BSD style. --little-endian Set output hexadecimal checksum value as little endian convention. By default, value is displayed as big endian. -h, --help Displays help and exits The following four options are useful only when verifying checksums (-c) -c, --check FILE Read xxHash sums from FILE and check them -q, --quiet Don't print OK for each successfully verified file --strict Return an error code if any line in the file is invalid, not just if some checksums are wrong. This policy is disabled by default, though UI will prompt an informational message if any line in the file is detected invalid. --status Don't output anything. Status code shows success. -w, --warn Emit a warning message about each improperly formatted checksum line. The following options are useful only benchmark purpose -b Benchmark mode. See EXAMPLES for details. -b# Specify ID of variant to be tested. Multiple variants can be selected, separated by a ',' comma. -BBLOCKSIZE Only useful for benchmark mode (-b). See EXAMPLES for details. BLOCKSIZE specifies benchmark mode's test data block size in bytes. Default value is 102400 -iITERATIONS Only useful for benchmark mode (-b). See EXAMPLES for details. ITERATIONS specifies number of iterations in benchmark. Single iteration lasts approximately 1000 milliseconds. Default value is 3

EXIT STATUS

xxhsum exit 0 on success, 1 if at least one file couldn't be read or doesn't have the same checksum as the -c option.

EXAMPLES

Output xxHash (64bit) checksum values of specific files to standard output $ xxhsum -H1 foo bar baz Output xxHash (32bit and 64bit) checksum values of specific files to standard output, and redirect it to xyz.xxh32 and qux.xxh64 $ xxhsum -H0 foo bar baz > xyz.xxh32 $ xxhsum -H1 foo bar baz > qux.xxh64 Read xxHash sums from specific files and check them $ xxhsum -c xyz.xxh32 qux.xxh64 Benchmark xxHash algorithm. By default, xxhsum benchmarks xxHash main variants on a synthetic sample of 100 KB, and print results into standard output. The first column is the algorithm, the second column is the source data size in bytes, the third column is the number of hashes generated per second (throughput), and finally the last column translates speed in megabytes per second. $ xxhsum -b In the following example, the sample to hash is set to 16384 bytes, the variants to be benched are selected by their IDs, and each benchmark test is repeated 10 times, for increased accuracy. $ xxhsum -b1,2,3 -i10 -B16384

BUGS

Report bugs at: https://github.com/Cyan4973/xxHash/issues/

AUTHOR

Yann Collet

SEE ALSO

md5sum(1) xxhsum 0.7.4 July 2020 XXHSUM(1)

Search: Section: