DragonFly On-Line Manual Pages
iverilog(1) Version 10.0 (stable) iverilog(1)
NAME
iverilog - Icarus Verilog compiler
SYNOPSIS
iverilog [-ESVv] [-Bpath] [-ccmdfile|-fcmdfile] [-Dmacro[=defn]]
[-Pparameter=value] [-pflag=value] [-dname]
[-g1995|-g2001|-g2005|-g2005-sv|-g2009|-g2012|-g<feature>]
[-Iincludedir] [-mmodule] [-M[mode=]file] [-Nfile] [-ooutputfilename]
[-stopmodule] [-ttype] [-Tmin/typ/max] [-Wclass] [-ypath] sourcefile
DESCRIPTION
iverilog is a compiler that translates Verilog source code into
executable programs for simulation, or other netlist formats for
further processing. The currently supported targets are vvp for
simulation, and fpga for synthesis. Other target types are added as
code generators are implemented.
OPTIONS
iverilog accepts the following options:
-Bbase The iverilog program uses external programs and configuration
files to preprocess and compile the Verilog source. Normally,
the path used to locate these tools is built into the iverilog
program. However, the -B switch allows the user to select a
different set of programs. The path given is used to locate
ivlpp, ivl, code generators and the VPI modules.
-cfile -ffile
These flags specify an input file that contains a list of
Verilog source files. This is similar to the command file of
other Verilog simulators, in that it is a file that contains
the file names instead of taking them on the command line. See
Command Files below.
-Dmacro Defines macro macro with the string `1' as its definition. This
form is normally only used to trigger ifdef conditionals in the
Verilog source.
-Dmacro=defn
Defines macro macro as defn.
-Pparameter=value
Override (i.e. defparam) a parameter in a root module. This
allows the user to override at compile time (defparam) a
parameter in a root module instance. For example, -Pmain.foo=2
overrides the parameter foo in the root instance main with the
value 2.
-dname Activate a class of compiler debugging messages. The -d switch
may be used as often as necessary to activate all the desired
messages. Supported names are scopes, eval_tree, elaborate,
and synth2; any other names are ignored.
-E Preprocess the Verilog source, but do not compile it. The
output file is the Verilog input, but with file inclusions and
macro references expanded and removed. This is useful, for
example, to preprocess Verilog source for use by other
compilers.
-g1995|-g2001|-g2001-noconfig|-g2005|-g2005-sv|-g2009|-g2012
Select the Verilog language generation to support in the
compiler. This selects between IEEE1364-1995, IEEE1364-2001,
IEEE1364-2005, IEEE1800-2005, IEEE1800-2009, or IEEE1800-2012.
Icarus Verilog currently defaults to the IEEE1364-2005
generation of the language. This flag is used to restrict the
language to a set of keywords/features, this allows simulation
of older Verilog code that may use newer keywords and for
compatibility with other tools. Much of the IEEE1800
generations functionality is not currently supported. The
IEEE1800 generations do parse all the keywords, so they can be
used to verify that IEEE1364 compliant Verilog code does not
use any of the new IEEE1800 keywords.
-gverilog-ams|-gno-verilog-ams
Enable or disable (default) support for Verilog-AMS. Very
little Verilog-AMS specific functionality is currently
supported.
-gspecify|-gno-specify
Enable or disable (default) specify block support. When
enabled, specify block code is elaborated. When disabled,
specify blocks are parsed but ignored. Specify blocks are
commonly not needed for RTL simulation, and in fact can hurt
performance of the simulation. However, disabling specify
blocks reduces accuracy of full-timing simulations.
-gstd-include|-gno-std-include
Enable (default) or disable the search of a standard
installation include directory after all other explicit include
directories. This standard include directory is a convenient
place to install standard header files that a Verilog program
may include.
-grelative-include|-gno-relative-include
Enable or disable (default) adding the local files directory to
the beginning of the include file search path. This allows
files to be included relative to the current file not the more
common files are only found in the working directory or in the
specified include file search path.
-gxtypes|-gno-xtypes
Enable (default) or disable support for extended types.
Enabling extended types allows for new types that are supported
by Icarus Verilog as extensions beyond the baseline Verilog. It
may be necessary to disable extended types if compiling code
that clashes with the few new keywords used to implement the
type system.
-gio-range-error|-gno-io-range-error
The standards requires that a vectored port have matching
ranges for its port declaration as well as any net/register
declaration. It was common practice in the past to only specify
the range for the net/register declaration and some tools still
allow this. By default any mismatch is reported as a error.
Using -gno-io-range-error will produce a warning instead of a
fatal error for the case of a vectored net/register and a
scalar port declaration.
-gstrict-ca-eval|-gno-strict-ca-eval
The standard requires that if any input to a continuous
assignment expression changes value, the entire expression is
re-evaluated. By default, parts of the expression that do not
depend on the changed input value(s) are not re-evaluated. If
an expression contains a call to a function that doesn't depend
solely on its input values or that has side effects, the
resulting behavior will differ from that required by the
standard. Using -gstrict-ca-eval will force standard compliant
behavior (with some loss in performance).
-gstrict-expr-width|-gno-strict-expr-width
Enable or disable (default) strict compliance with the standard
rules for determining expression bit lengths. When disabled,
the RHS of a parameter assignment is evaluated as a lossless
expression, as is any expression containing an unsized constant
number, and unsized constant numbers are not truncated to
integer width.
-Iincludedir
Append directory includedir to list of directories searched for
Verilog include files. The -I switch may be used many times to
specify several directories to search, the directories are
searched in the order they appear on the command line.
-Mpath This is equivalent to -Mall=path. Preserved for backwards
compatibility.
-Mmode=path
Write into the file specified by path a list of files that
contribute to the compilation of the design. If mode is all or
prefix, this includes files that are included by include
directives and files that are automatically loaded by library
support as well as the files explicitly specified by the user.
If mode is include, only files that are included by include
directives are listed. If mode is module, only files that are
specified by the user or that are automatically loaded by
library support are listed. The output is one file name per
line, with no leading or trailing space. If mode is prefix,
files that are included by include directives are prefixed by
"I " and other files are prefixed by "M ".
-mmodule
Add this module to the list of VPI modules to be loaded by the
simulation. Many modules can be specified, and all will be
loaded, in the order specified. The system module is implicit
and always included. If a System Function Table file
(<module>.sft) exists for the module it will be loaded
automatically.
-Npath This is used for debugging the compiler proper. Dump the final
netlist form of the design to the specified file. It otherwise
does not affect operation of the compiler. The dump happens
after the design is elaborated and optimized.
-o filename
Place output in the file filename. If no output file name is
specified, iverilog uses the default name a.out.
-pflag=value
Assign a value to a target specific flag. The -p switch may be
used as often as necessary to specify all the desired flags.
The flags that are used depend on the target that is selected,
and are described in target specific documentation. Flags that
are not used are ignored.
-S Synthesize. Normally, if the target can accept behavioral
descriptions the compiler will leave processes in behavioral
form. The -S switch causes the compiler to perform synthesis
even if it is not necessary for the target. If the target type
is a netlist format, the -S switch is unnecessary and has no
effect.
-s topmodule
Specify the top level module to elaborate. Icarus Verilog will
by default choose modules that are not instantiated in any
other modules, but sometimes that is not sufficient, or
instantiates too many modules. If the user specifies one or
more root modules with -s flags, then they will be used as root
modules instead.
-Tmin|typ|max
Use this switch to select min, typ or max times from
min:typ:max expressions. Normally, the compiler will simply use
the typ value from these expressions (printing a warning for
the first ten it finds) but this switch will tell the compiler
explicitly which value to use. This will suppress the warning
that the compiler is making a choice.
-ttarget
Use this switch to specify the target output format. See the
TARGETS section below for a list of valid output formats.
-v Turn on verbose messages. This will print the command lines
that are executed to perform the actual compilation, along with
version information from the various components, as well as the
version of the product as a whole. You will notice that the
command lines include a reference to a key temporary file that
passes information to the compiler proper. To keep that file
from being deleted at the end of the process, provide a file
name of your own in the environment variable IVERILOG_ICONFIG.
If the selected target is vvp, the -v switch is appended to the
shebang line in the compiler output file, so directly executing
the compiler output file will turn on verbose messages in vvp.
This extra verbosity can be avoided by using the vvp command to
indirectly execute the compiler output file.
-V Print the version of the compiler, and exit.
-Wclass Turn on different classes of warnings. See the WARNING TYPES
section below for descriptions of the different warning groups.
If multiple -W switches are used, the warning set is the union
of all the requested classes.
-ylibdir
Append the directory to the library module search path. When
the compiler finds an undefined module, it looks in these
directories for files with the right name.
-Ysuffix
Add suffix to the list of accepted file name suffixes used when
searching a library for cells. The list defaults to the single
entry .v.
MODULE LIBRARIES
The Icarus Verilog compiler supports module libraries as directories
that contain Verilog source files. During elaboration, the compiler
notices the instantiation of undefined module types. If the user
specifies library search directories, the compiler will search the
directory for files with the name of the missing module type. If it
finds such a file, it loads it as a Verilog source file, they tries
again to elaborate the module.
Library module files should contain only a single module, but this is
not a requirement. Library modules may reference other modules in the
library or in the main design.
TARGETS
The Icarus Verilog compiler supports a variety of targets, for
different purposes, and the -t switch is used to select the desired
target.
null The null target causes no code to be generated. It is useful
for checking the syntax of the Verilog source.
vvp This is the default. The vvp target generates code for the vvp
runtime. The output is a complete program that simulates the
design but must be run by the vvp command. The -pfileline=1
option can be used to add procedural statement debugging
opcodes to the generated code.
fpga This is a synthesis target that supports a variety of fpga
devices, mostly by EDIF format output. The Icarus Verilog fpga
code generator can generate complete designs or EDIF macros
that can in turn be imported into larger designs by other
tools. The fpga target implies the synthesis -S flag.
vhdl This target produces a VHDL translation of the Verilog netlist.
The output is a single file containing VHDL entities
corresponding to the modules in the Verilog source code. Note
that only a subset of the Verilog language is supported. See
the wiki for more information.
WARNING TYPES
These are the types of warnings that can be selected by the -W switch.
All the warning types (other than all) can also be prefixed with no- to
turn off that warning. This is most useful after a -Wall argument to
suppress isolated warning types.
all This enables the anachronisms, implicit, portbind,
select-range, timescale, and sensitivity-entire-array warning
categories.
anachronisms
This enables warnings for use of features that have been
deprecated or removed in the selected generation of the Verilog
language.
implicit
This enables warnings for creation of implicit declarations.
For example, if a scalar wire X is used but not declared in the
Verilog source, this will print a warning at its first use.
portbind
This enables warnings for ports of module instantiations that
are not connected but probably should be. Dangling input ports,
for example, will generate a warning.
select-range
This enables warnings for constant out of bound selects. This
includes partial or fully out of bound selects as well as a
select containing a 'bx or 'bz in the index.
timescale
This enables warnings for inconsistent use of the timescale
directive. It detects if some modules have no timescale, or if
modules inherit timescale from another file. Both probably mean
that timescales are inconsistent, and simulation timing can be
confusing and dependent on compilation order.
infloop This enables warnings for always statements that may have
runtime infinite loops (has paths with no or zero delay). This
class of warnings is not included in -Wall and hence does not
have a no- variant. A fatal error message will always be
printed when the compiler can determine that there will
definitely be an infinite loop (all paths have no or zero
delay).
When you suspect an always statement is producing a runtime
infinite loop use this flag to find the always statements that
need to have their logic verified. It is expected that many of
the warnings will be false positives, since the code treats the
value of all variables and signals as indeterminate.
sensitivity-entire-vector
This enables warnings for when a part select within an "always
@*" statement results in the entire vector being added to the
implicit sensitivity list. Although this behaviour is
prescribed by the IEEE standard, it is not what might be
expected and can have performance implications if the vector is
large.
sensitivity-entire-array
This enables warnings for when a word select within an "always
@*" statement results in the entire array being added to the
implicit sensitivity list. Although this behaviour is
prescribed by the IEEE standard, it is not what might be
expected and can have performance implications if the array is
large.
SYSTEM FUNCTION TABLE FILES
If the source file name as a .sft suffix, then it is taken to be a
system function table file. A System function table file is used to
describe to the compiler the return types for system functions. This is
necessary because the compiler needs this information to elaborate
expressions that contain these system functions, but cannot run the
sizetf functions since it has no run-time.
The format of the table is ASCII, one function per line. Empty lines
are ignored, and lines that start with the '#' character are comment
lines. Each non-comment line starts with the function name, then the
vpi type (i.e. vpiSysFuncReal). The following types are supported:
vpiSysFuncReal
The function returns a real/realtime value.
vpiSysFuncInt
The function returns an integer.
vpiSysFuncSized <wid> <signed|unsigned>
The function returns a vector with the given width, and is
signed or unsigned according to the flag.
COMMAND FILES
The command file allows the user to place source file names and certain
command line switches into a text file instead of on a long command
line. Command files can include C or C++ style comments, as well as #
comments, if the # starts the line.
file name
A simple file name or file path is taken to be the name of a
Verilog source file. The path starts with the first non-white-
space character. Variables are substituted in file names.
-c cmdfile -f cmdfile
A -c or -f token prefixes a command file, exactly like it does
on the command line. The cmdfile may be on the same line or the
next non-comment line.
-y libdir
A -y token prefixes a library directory in the command file,
exactly like it does on the command line. The parameter to the
-y flag may be on the same line or the next non-comment line.
Variables in the libdir are substituted.
+incdir+includedir
The +incdir+ token in command files gives directories to search
for include files in much the same way that -I flags work on
the command line. The difference is that multiple +includedir
directories are valid parameters to a single +incdir+ token,
although you may also have multiple +incdir+ lines.
Variables in the includedir are substituted.
+libext+ext
The +libext token in command files fives file extensions to try
when looking for a library file. This is useful in conjunction
with -y flags to list suffixes to try in each directory before
moving on to the next library directory.
+libdir+dir
This is another way to specify library directories. See the -y
flag.
+libdir-nocase+dir
This is like the +libdir statement, but file names inside the
directories declared here are case insensitive. The missing
module name in a lookup need not match the file name case, as
long as the letters are correct. For example, "foo" matches
"Foo.v" but not "bar.v".
+define+NAME=value
The +define+ token is the same as the -D option on the command
line. The value part of the token is optional.
+parameter+NAME=value
The +parameter+ token is the same as the -P option on the
command line.
+timescale+value
The +timescale+ token is used to set the default timescale for
the simulation. This is the time units and precision before any
`timescale directive or after a `resetall directive. The
default is 1s/1s.
+toupper-filename
This token causes file names after this in the command file to
be translated to uppercase. This helps with situations where a
directory has passed through a DOS machine, and in the process
the file names become munged.
+tolower-filename
This is similar to the +toupper-filename hack described above.
+integer-width+value
This allows the programmer to select the width for integer
variables in the Verilog source. The default is 32, the value
can be any desired integer value.
+width-cap+value
This allows the programmer to select the width cap for unsized
expressions. If the calculated width for an unsized expression
exceeds this value, the compiler will issue a warning and limit
the expression width to this value.
VARIABLES IN COMMAND FILES
In certain cases, iverilog supports variables in command files. These
are strings of the form "$(varname)" or "${varname}", where varname is
the name of the environment variable to read. The entire string is
replaced with the contents of that variable. Variables are only
substituted in contexts that explicitly support them, including file
and directory strings.
Variable values come from the operating system environment, and not
from preprocessor defines elsewhere in the file or the command line.
PREDEFINED MACROS
The following macros are predefined by the compiler:
__ICARUS__ = 1
This is always defined when compiling with Icarus Verilog.
__VAMS_ENABLE__ = 1
This is defined if Verilog-AMS is enabled.
EXAMPLES
These examples assume that you have a Verilog source file called
hello.v in the current directory
To compile hello.v to an executable file called a.out:
iverilog hello.v
To compile hello.v to an executable file called hello:
iverilog -o hello hello.v
To compile and run explicitly using the vvp runtime:
iverilog -ohello.vvp -tvvp hello.v
AUTHOR
Steve Williams (steve@icarus.com)
SEE ALSO
vvp(1), <http://iverilog.icarus.com/>
Tips on using, debugging, and developing the compiler can be found at
<http://iverilog.wikia.com/>
COPYRIGHT
Copyright (C) 2002-2015 Stephen Williams
This document can be freely redistributed according to the terms of the
GNU General Public License version 2.0
Aug 7th, 2015 iverilog(1)