DragonFly On-Line Manual Pages

Search: Section:  


MEMTEMP(4)            DragonFly Kernel Interfaces Manual            MEMTEMP(4)

NAME

memtemp -- device driver for memory thermal sensor

SYNOPSIS

To compile this driver into the kernel, place the following lines in your kernel configuration file: device dimm device coremctl device memtemp Alternatively, to load the driver as a module at boot time, place the following line in loader.conf(5): memtemp_load="YES"

DESCRIPTION

The memtemp driver provides support for the memory thermal sensor. The values are exposed through the HW_SENSORS sysctl(3) tree. For example: % sysctl hw.sensors hw.sensors.dimm0.temp0: 40.00 degC (node0 chan0 DIMM0 temp), OK hw.sensors.dimm1.temp0: 39.00 degC (node0 chan1 DIMM0 temp), OK The DIMM location and configurable critical temperature thresholds are exposed through hw.dimminfo sysctl(3) tree. For example: % sysctl hw.dimminfo hw.dimminfo.dimm0.node: 0 hw.dimminfo.dimm0.chan: 0 hw.dimminfo.dimm0.slot: 0 hw.dimminfo.dimm0.temp_hiwat: 93 hw.dimminfo.dimm0.temp_lowat: 88 hw.dimminfo.dimm1.node: 0 hw.dimminfo.dimm1.chan: 1 hw.dimminfo.dimm1.slot: 0 hw.dimminfo.dimm1.temp_hiwat: 93 hw.dimminfo.dimm1.temp_lowat: 88 If the temperature goes above the configured critical temperature threshold (temp_hiwat), a notify event will be sent using devctl(4).

HARDWARE

The memtemp driver supports the following memory thermal sensors: o Intel E5 v2 memory thermal sensors o Intel E5 v3 memory thermal sensors o Intel E3 v3 memory thermal sensors o Intel Core i3/i5/i7 Haswell thermal sensors

SEE ALSO

systat(1), sysctl(3), devctl(4), devd(8), sensorsd(8), sysctl(8)

HISTORY

The memtemp driver first appeared in DragonFly 4.1.

AUTHORS

The memtemp driver was written by Sepherosa Ziehau <sepherosa@gmail.com>. DragonFly 5.5 May 24, 2015 DragonFly 5.5

Search: Section: