DragonFly On-Line Manual Pages
owstats(1) DragonFly General Commands Manual owstats(1)
NAME
owstats - Command line application used to parse OWAMP data files.
SYNOPSIS
owstats [options] datafile.owp [datafile2.owp ...]
DESCRIPTION
owstats is a command line application that is used to parse OWAMP data
files. It is used to display the results in a number of different
textual formats.
OWAMP supports three reporting formats. A textual summary that was
designed to be as similar to the results that ping produces as
possible. A machine readable summary format (-M). And finally a raw
format that prints out the data from each and every packet in as
compact of a format as possible (-R). The textual summary also allows
the information from each packet to be reported using the -v option.
The default textual summary will be used if neither the -M or the -R
options are specified. It includes:
SID
Session Identifier. This value is unique for every test session.
Sent, Lost, Duplicates
Number of packets that were sent, lost, and duplicated as seen
by OWAMP.
Min Delay, Median Delay, Max Delay, Error Estimate
Minimum, median and maximum delay seen for sample. Maximum error
estimate for the sample. (The median is determined using a
histogram, so the resolution of this value is bounded by the -b
parameter. This can lead to misleading results, for example, for
very small values of latency it is possible to see a value for
the median that is greater than the maximum, but this is simply
due to the resolution of the median measurement.)
Jitter
An estimate of how "stable" the delay samples are. OWAMP reports
the the 95th percentile of delay - 50th percentile of delay.
Additional percentiles
If the -a option is used, those additional percentiles from the
sample are displayed.
TTL (hops) information
As a packet traverses the network, the IP TTL field is
decremented each time the packet crosses a router. OWAMP has
been designed to collect the TTL information from the packets.
The OWAMP sender sets the TTL of all outgoing packets to 255.
The OWAMP receiver retrieves the TTL from the packet. The normal
textual report uses this information to report the number of
hops (number of routers) the packet traversed. The number of
distinct values is reported as well as the minimum and maximum
number of hops seen in the given session. The other reporting
formats just report raw TTL values as seen in the packets. (It
should be noted that if the number of hops reported seems
unusually large, it probably means the OWAMP sender was not able
to set the TTL value correctly. The traceroute(1) program can be
used to verify what OWAMP is reporting.)
Reordering
Finally OWAMP reports the amount of re-ordering it observed. A
description of the metric used to report this can be found at:
http://www.internet2.edu/performance/owamp/draft-shalunov-
reordering-definition-02.txt.html
OPTIONS
-h
Print a usage message and exit.
Default:
Unset.
Output Options:
-a percentile_list
percentile_list indicates the list of quantiles to be reported
out in addition to median. This is done by specifying a list of
percentiles in a comma separated string (spaces are not
allowed). Each percentile is indicated by a floating point value
between 0.0 and 100.0.
This value is only used if reporting summary statistics.
Default:
Unset.
-b bucket_width
A histogram of delays is created to compute the summary
statistics. (This is used to compute percentiles of delay such
as median.) The bucket_width indicates the resolution of the
bins in the histogram. This value is specified using a floating
point value and the units are seconds.
Because a histogram to compute the median (and other percentiles
of delay) the results can be misleading if the bucket_width is
not appropriate. For example, if all of the delays in the sample
are smaller than the value of bucket_width then the median will
be reported as bucket_width, a value that is greater than the
maximum delay in the sample. To avoid this, bucket_width should
be picked to be smaller than (max - min). The default value was
selected to be reasonable for most real network paths, it is not
appropriate for tests to the localhost however.
This value is only used if reporting summary statistics.
Default:
0.0001 (100 usecs)
-d dir
dir indicates the directory in which to save summary files if
the -p option is used.
Default:
(current working directory)
-M
Print summary information in a more computer pars-able format.
Specifically, values are printed out in a key/value style. Units
are seconds for all time values.
The -M option is ignored if -Q is set.
Default:
Unset.
-N count
Number of test packets to put in sub-session summaries when
computing statistics on owamp session data.
This option is used to break down the summary statistics in
smaller sample sizes than a complete owp file. This is useful
when breaking up very long running sessions.
This option is only used for statistical output, and therefore
has no effect on the -R output mode.
Default:
Unset. (complete files are treated as the sample size)
-n units
units indicates what units time values should be reported in.
units is specified using a single character specifying the units
wanted.
The available units are:
'n' nanoseconds (ns)
'u' microseconds (us)
'm' milliseconds (ms)
's' seconds (s)
This is only used for the human-readable summary statistics and
the -v mode of reporting individual records. In particular, it
is not used for the -R or -M output modes.
Default:
Unset.
-p
Save output summary information into files instead of printing
it to STDOUT. Also, print the names of the files to STDOUT. The
files will be saved in the directory specified by the -d option.
The summary filenames are in the format:
${START_TIME}_${END_TIME}.${FILETYPE}
STARTTIME and ENDTIME are the start and end timestamps for the
session or sub-session. The timestamps are ASCII representation
of 64 bit integers with the high-order 32 bits representing the
number of seconds since Jan 1, 1900 and the low-order 32 bits
representing fractional seconds. The FILETYPE is sum for -M
summary files, and txt for the default human-readable summary
information.
This option is ignored if the -R option is specified.
Default:
Unset.
-Q
Suppress the printing of all summary statistics and human-
readable individual delays (-v).
Default:
Unset.
-R
Print individual packet records one per line in the raw format:
SEQNO SENDTIME SSYNC SERR RECVTIME RSYNC RERR TTL
SEQNO Sequence number.
SENDTIME Send timestamp.
SSYNC Sending system synchronized (0 or 1).
SERR Estimate of SENDTIME error.
RECVTIME Receive timestamp.
RSYNC Receiving system synchronized (0 or 1).
RERR Estimate of RECVTIME error.
TTL TTL IP field.
The timestamps are ASCII representation of 64 bit integers with
the high-order 32 bits representing the number of seconds since
Jan 1, 1900 and the low-order 32 bits representing fractional
seconds. Lost packet records are indicated with a RECVTIME of 0
(zero). The sequence number is simply an integer. The error
estimates are printed as floating-point numbers using scientific
notation. TTL is the IP field from the packet. The TTL in
sending packets should be initialized to 255, so the number of
hops the packet traversed can be computed. If the receiving host
is not able to determine the TTL field, this will be reported as
255. (Some socket API's do not expose the TTL field.)
The -R option implies -Q.
Default:
Unset.
-v
Print delays for individual packet records. This option is
disabled by the -Q and -R options.
Default:
Unset.
EXAMPLES
owstats datafile.owp
Report the summary statistics from the file datafile.owp.
owstats -a 5,95 datafile.owp
Report the summary statistics from the file datafile.owp. Also,
report the 5th and 95th percentile of delay as an extra
statistics.
owstats -R datafile.owp
Print out the packets in a more machine readable format with no
statistics computed at all.
owstats -v datafile.owp
Show individual delays for each packet with summary statistics
printed at the end.
owstats -M datafile.owp
Print out summary statistics in a more computer pars-able
format.
owstats datafile1.owp datafile2.owp datafile3.owp
Print out summary statistics for multiple files.
SEE ALSO
owampd(8), owping(1), owfetch(1) and the OWAMP web site
(http://e2epi.internet2.edu/owamp/).
ACKNOWLEDGMENTS
This material is based in part on work supported by the National
Science Foundation (NSF) under Grant No. ANI-0314723. Any opinions,
findings and conclusions or recommendations expressed in this material
are those of the author(s) and do not necessarily reflect the views of
the NSF.
$Date: 2009-01-07 14:38:08 -0500 (Wed, 07 Jan 2009) $ owstats(1)