DragonFly On-Line Manual Pages

Search: Section:  


SPAMD(8)               DragonFly System Manager's Manual              SPAMD(8)

NAME

spamd - spam deferral daemon

SYNOPSIS

spamd [-45bdv] [-B maxblack] [-c maxcon] [-G passtime:greyexp:whiteexp] [-h hostname] [-l address] [-M address] [-n name] [-p port] [-S secs] [-s secs] [-w window] [-Y synctarget] [-y synclisten] [-m mode] [-t table_number]

DESCRIPTION

spamd is a fake sendmail(8)-like daemon which rejects false mail. It is designed to be very efficient so that it does not slow down the receiving machine. spamd considers sending hosts to be of three types: blacklisted hosts are redirected to spamd and tarpitted i.e. they are communicated with very slowly to consume the sender's resources. Mail is rejected with either a 450 or 550 error message. A blacklisted host will not be allowed to talk to a real mail server. whitelisted hosts do not talk to spamd. Their connections are instead sent to a real mail server, such as sendmail(8). greylisted hosts are redirected to spamd, but spamd has not yet decided if they are likely spammers. They are given a temporary failure message by spamd when they try to deliver mail. When spamd is run in default mode, it will greylist connections from new hosts. Depending on its configuration, it may choose to blacklist the host or, if the checks described below are met, eventually whitelist it. When spamd is run in blacklist-only mode, using the -b flag, it will consult a pre-defined set of blacklist addresses to decide whether to tarpit the host or not. When a sending host talks to spamd, the reply will be stuttered. That is, the response will be sent back a character at a time, slowly. For blacklisted hosts, the entire dialogue is stuttered. For greylisted hosts, the default is to stutter for the first 10 seconds of dialogue only. The options are as follows: -4 For blacklisted entries, return error code 450 to the spammer (default). -5 For blacklisted entries, return error code 550 to the spammer. -B maxblack The maximum number of concurrent blacklisted connections to stutter at. This value may not be greater than maxcon (see below). The default is maxcon - 100. When this value is exceeded new blacklisted connections will not be stuttered at. -b Run in blacklist-only mode. -c maxcon The maximum number of concurrent connections to allow. maxcon may not exceed kern.maxfiles - 200, and defaults to 800. -d Debug mode. spamd does not fork(2) into the background. -G passtime:greyexp:whiteexp Adjust the three time parameters for greylisting. passtime defaults to 25 (minutes), greyexp to 4 (hours), and whiteexp to 864 (hours, approximately 36 days). -h hostname The hostname that is reported in the SMTP banner. -l address Specify the local address to which spamd is to bind(2). By default spamd listens on all local addresses. -M address Specify a local IP address which is listed as a low priority MX record, used to identify and trap hosts that connect to MX hosts out of order. See GREYTRAPPING below for details. -n name The SMTP version banner that is reported upon initial connection. -p port Specify a different port number from the default port that spamd should listen for redirected SMTP connections on. The default port is found by looking for the named service "spamd" using getservbyname(3). -S secs Stutter at greylisted connections for the specified amount of seconds, after which the connection is not stuttered at. The default is 10; maximum is 90. -s secs Delay each character sent to the client by the specified amount of seconds. The default is 1; maximum is 10. -v Enable verbose logging. By default spamd logs connections, disconnections and blacklist matches to syslogd(8) at LOG_INFO level. With verbose logging enabled, message detail including subject and recipient information is logged at LOG_INFO, along with the message body and SMTP dialogue being logged at LOG_DEBUG level. -w window Set the socket receive buffer to this many bytes, adjusting the window size. -Y synctarget Add target synctarget to receive synchronisation messages. synctarget can be either an IPv4 address for unicast messages or a network interface and optional TTL value for multicast messages to the group 224.0.1.240. If the multicast TTL is not specified, a default value of 1 is used. This option can be specified multiple times. See also SYNCHRONISATION below. -y synclisten Listen on synclisten for incoming synchronisation messages. The format for synclisten is the same as for synctarget, above. This option can be specified only once. See also SYNCHRONISATION below. -m mode Firewall type. Can be pf (default) or ipfw. -t table_number IPFW table number. Use only with [-m ipfw]. When run in default mode, connections receive the pleasantly innocuous temporary failure of: 451 Temporary failure, please try again later. This happens in the SMTP dialogue immediately after the DATA command is received from the client. spamd will use the db file in /var/db/spamd to track these connections to spamd by connecting IP address, HELO/EHLO, envelope-from, and envelope-to, or tuple for short. A previously unseen tuple is added to the /var/db/spamd database, recording the time an initial connection attempt was seen. After passtime minutes if spamd sees a retried attempt to deliver mail for the same tuple, spamd will whitelist the connecting address by adding it as a whitelist entry to /var/db/spamd. spamd regularly scans the /var/db/spamd database and configures all whitelist addresses as the pf(4) <spamd-white> table, allowing connections to pass to the real MTA. Any addresses not found in <spamd-white> are redirected to spamd. The following pf.conf(5) example is suggested: table <spamd-white> persist rdr pass inet proto tcp from !<spamd-white> to any \ port smtp -> 127.0.0.1 port spamd spamd removes tuple entries from the /var/db/spamd database if delivery has not been retried within greyexp hours from the initial time a connection is seen. The default is 4 hours as this is the most common setting after which MTAs will give up attempting to retry delivery of a message. spamd removes whitelist entries from the /var/db/spamd database if no mail delivery activity has been seen from the whitelisted address by spamlogd(8) within whiteexp hours from the initial time an address is whitelisted. The default is 36 days to allow for the delivery of monthly mailing list digests without greylist delays every time. spamd-setup(8) should be run periodically by cron(8). When run in blacklist-only mode, the -b flag should be specified. Use crontab(1) to uncomment the entry in root's crontab. spamlogd(8) should be used to update the whitelist entries in /var/db/spamd when connections are seen to pass to the real MTA on the smtp port. spamdb(8) can be used to examine and alter the contents of /var/db/spamd. See spamdb(8) for further information. spamd sends log messages to syslogd(8) using facility daemon and, with increasing verbosity, level err, warn, info, and debug. The following syslog.conf(5) section can be used to log connection details to a dedicated file: !spamd daemon.err;daemon.warn;daemon.info /var/log/spamd A typical entry shows the time of the connection and the IP address of the connecting host. When a host connects, the total number of active connections and the number of connections from blacklisted hosts is shown (connected (xx/xx)). When a host disconnects, the amount of time spent talking to spamd is shown.

GREYTRAPPING

When running spamd in default mode, it may be useful to define spamtrap destination addresses to catch spammers as they send mail from greylisted hosts. Such spamtrap addresses affect only greylisted connections to spamd and are used to temporarily blacklist a host that is obviously sending spam. Unused email addresses or email addresses on spammers' lists are very useful for this. When a host that is currently greylisted attempts to send mail to a spamtrap address, it is blacklisted for 24 hours by adding the host to the spamd blacklist <spamd-greytrap>. Spamtrap addresses are added to the /var/db/spamd database with the following spamdb(8) command: # spamdb -T -a 'spamtrap@mydomain.org' See spamdb(8) for further details. The file /usr/local/etc/spamd/spamd.alloweddomains can be used to specify a list of domainname suffixes, one per line, one of which must match each destination email address in the greylist. Any destination address which does not match one of the suffixes listed in spamd.alloweddomains will be trapped, exactly as if it were sent to a spamtrap address. Comment lines beginning with `#' and empty lines are ignored. For example, if spamd.alloweddomains contains: @humpingforjesus.com obtuse.com The following destination addresses would not cause the sending host to be trapped: beardedclams@humpingforjesus.com beck@obtuse.com beck@snouts.obtuse.com However the following addresses would cause the sending host to be trapped: peter@apostles.humpingforjesus.com bigbutts@bofh.ucs.ualberta.ca A low priority MX IP address may be specified with the -M option. When spamd has such an address specified, no host may enter new greylist tuples when connecting to this address; only existing entries may be updated. Any host attempting to make new deliveries to the low priority MX for which a tuple has not previously been seen will be trapped. Note that it is important to ensure that a host running spamd with the low priority MX address active must see all the greylist changes for a higher priority MX host for the same domains. This is best done by the host itself receiving the connections to the higher priority MX on another IP address (which may be an IP alias). This will ensure that hosts are not trapped erroneously if the higher priority MX is unavailable. For example, on a host which is an existing MX record for a domain of value 10, a second IP address with MX of value 99 (a higher number, and therefore lower priority) would ensure that any RFC conformant client would attempt delivery to the IP address with the MX value of 10 first, and should not attempt to deliver to the address with MX value 99. BLACKLIST-ONLY MODE When running in default mode, the pf.conf(5) rules described above are sufficient. However when running in blacklist-only mode, a slightly modified pf.conf(5) ruleset is required, redirecting any addresses found in the <spamd> table to spamd. Any other addresses are passed to the real MTA. table <spamd> persist rdr pass inet proto tcp from <spamd> to any \ port smtp -> 127.0.0.1 port spamd Addresses can be loaded into the table, like: # pfctl -q -t spamd -T replace -f /usr/local/share/spammers spamd-setup(8) can also be used to load addresses into the <spamd> table. It has the added benefit of being able to remove addresses from blacklists, and will connect to spamd over a localhost socket, giving spamd information about each source of blacklist addresses, as well as custom rejection messages for each blacklist source that can be used to let any real person whose mail is deferred by spamd know why their address has been listed from sending mail. This is important as it allows legitimate mail senders to pressure spam sources into behaving properly so that they may be removed from the relevant blacklists.

CONFIGURATION CONNECTIONS

spamd listens for configuration connections on the port identified by the named service "spamd-cfg" (see services(5)). The configuration socket listens only on the INADDR_LOOPBACK address. Configuration of spamd is done by connecting to the configuration socket, and sending blacklist information, one blacklist per line. Each blacklist consists of a name, a message to reject mail with, and addresses in CIDR format, all separated by semicolons (;): tag;"rejection message";aaa.bbb.ccc.ddd/mm;aaa.bbb.ccc.ddd/mm The rejection message must be inside double quotes. A \" will produce a double quote in the output. \n will produce a newline. %A will expand to the connecting IP address in dotted quad format. %% may be used to produce a single % in the output. \\ will produce a single \. spamd will reject mail by displaying all the messages from all blacklists in which a connecting address is matched. spamd-setup(8) is normally used to configure this information.

SYNCHRONISATION

spamd supports realtime synchronisation of spamd databases between a number of spamd daemons running on multiple machines, using the -Y and -y options. The databases are synchronised for greylisted and trapped entries; whitelisted entries are not updated. The following example will accept incoming multicast and unicast synchronisation messages, and send outgoing multicast messages through the network interface em0: # /usr/local/libexec/spamd -y em0 -Y em0 The second example will increase the multicast TTL to a value of 2, add the unicast targets foo.somewhere.org and bar.somewhere.org, and accept incoming unicast messages sent to example.somewhere.org only. # /usr/local/libexec/spamd -y example.somewhere.org -Y em0:2 \ -Y foo.somewhere.org -Y bar.somewhere.org If the file /usr/local/etc/spamd/spamd.key exists, spamd will calculate the message-digest fingerprint (checksum) for the file and use it as a shared key to authenticate the synchronisation messages. The file itself can contain any data. For example, to create a secure random key: # dd if=/dev/random of=/usr/local/etc/spamd/spamd.key bs=2048 count=1 The file spamd.key needs to be copied to all hosts sending or receiving synchronisation messages.

FILES

/usr/local/etc/spamd/spamd.alloweddomains Required suffixes for greytrapping. /usr/local/etc/spamd/spamd.conf Default configuration file. /usr/local/etc/spamd/spamd.key Authentication key for synchronisation messages. /var/db/spamd Greylisting database.

SEE ALSO

pf.conf(5), services(5), spamd.conf(5), syslog.conf(5), pfctl(8), spamd-setup(8), spamdb(8), spamlogd(8), syslogd(8)

HISTORY

The spamd command first appeared in OpenBSD 3.3. Previous versions of spamd required traps to be entered into the database including the enclosing <> characters; current versions expect only the email address without the enclosing <> characters. Blacklisted hosts are no longer stored in the <spamd> table when operating in default mode for performance reasons.

BUGS

spamd currently uses the user "_spamd" outside a chroot jail when running in default mode, and requires the greylisting database in /var/db/spamd to be owned by the "_spamd" user. This is wrong and should change to a distinct user from the one used by the chrooted spamd process. DragonFly 6.5-DEVELOPMENT April 20 2009 DragonFly 6.5-DEVELOPMENT

Search: Section: