DragonFly On-Line Manual Pages
TALLOC(3) System Administration tools TALLOC(3)
NAME
talloc - hierarchical reference counted memory pool system with
destructors
SYNOPSIS
#include <talloc.h>
DESCRIPTION
If you are used to talloc from Samba3 then please read this carefully,
as talloc has changed a lot.
The new talloc is a hierarchical, reference counted memory pool system
with destructors. Quite a mouthful really, but not too bad once you get
used to it.
Perhaps the biggest change from Samba3 is that there is no distinction
between a "talloc context" and a "talloc pointer". Any pointer returned
from talloc() is itself a valid talloc context. This means you can do
this:
struct foo *X = talloc(mem_ctx, struct foo);
X->name = talloc_strdup(X, "foo");
and the pointer X->name would be a "child" of the talloc context X
which is itself a child of mem_ctx. So if you do talloc_free(mem_ctx)
then it is all destroyed, whereas if you do talloc_free(X) then just X
and X->name are destroyed, and if you do talloc_free(X->name) then just
the name element of X is destroyed.
If you think about this, then what this effectively gives you is an
n-ary tree, where you can free any part of the tree with talloc_free().
If you find this confusing, then I suggest you run the testsuite
program to watch talloc in action. You may also like to add your own
tests to testsuite.c to clarify how some particular situation is
handled.
TALLOC API
The following is a complete guide to the talloc API. Read it all at
least twice.
(type *)talloc(const void *ctx, type);
The talloc() macro is the core of the talloc library. It takes a memory
ctx and a type, and returns a pointer to a new area of memory of the
given type.
The returned pointer is itself a talloc context, so you can use it as
the ctx argument to more calls to talloc() if you wish.
The returned pointer is a "child" of the supplied context. This means
that if you talloc_free() the ctx then the new child disappears as
well. Alternatively you can free just the child.
The ctx argument to talloc() can be NULL, in which case a new top level
context is created.
void *talloc_size(const void *ctx, size_t size);
The function talloc_size() should be used when you don't have a
convenient type to pass to talloc(). Unlike talloc(), it is not type
safe (as it returns a void *), so you are on your own for type
checking.
(typeof(ptr)) talloc_ptrtype(const void *ctx, ptr);
The talloc_ptrtype() macro should be used when you have a pointer and
want to allocate memory to point at with this pointer. When compiling
with gcc >= 3 it is typesafe. Note this is a wrapper of talloc_size()
and talloc_get_name() will return the current location in the source
file. and not the type.
int talloc_free(void *ptr);
The talloc_free() function frees a piece of talloc memory, and all its
children. You can call talloc_free() on any pointer returned by
talloc().
The return value of talloc_free() indicates success or failure, with 0
returned for success and -1 for failure. The only possible failure
condition is if ptr had a destructor attached to it and the destructor
returned -1. See "talloc_set_destructor()" for details on destructors.
If this pointer has an additional parent when talloc_free() is called
then the memory is not actually released, but instead the most recently
established parent is destroyed. See "talloc_reference()" for details
on establishing additional parents.
For more control on which parent is removed, see "talloc_unlink()".
talloc_free() operates recursively on its children.
From the 2.0 version of talloc, as a special case, talloc_free() is
refused on pointers that have more than one parent, as talloc would
have no way of knowing which parent should be removed. To free a
pointer that has more than one parent please use talloc_unlink().
To help you find problems in your code caused by this behaviour, if you
do try and free a pointer with more than one parent then the talloc
logging function will be called to give output like this:
ERROR: talloc_free with references at some_dir/source/foo.c:123
reference at some_dir/source/other.c:325
reference at some_dir/source/third.c:121
Please see the documentation for talloc_set_log_fn() and
talloc_set_log_stderr() for more information on talloc logging
functions.
void *talloc_reference(const void *ctx, const void *ptr);
The talloc_reference() function makes ctx an additional parent of ptr.
The return value of talloc_reference() is always the original pointer
ptr, unless talloc ran out of memory in creating the reference in which
case it will return NULL (each additional reference consumes around 48
bytes of memory on intel x86 platforms).
If ptr is NULL, then the function is a no-op, and simply returns NULL.
After creating a reference you can free it in one of the following
ways:
o you can talloc_free() any parent of the original pointer. That will
reduce the number of parents of this pointer by 1, and will cause
this pointer to be freed if it runs out of parents.
o you can talloc_free() the pointer itself. That will destroy the
most recently established parent to the pointer and leave the
pointer as a child of its current parent.
For more control on which parent to remove, see "talloc_unlink()".
int talloc_unlink(const void *ctx, const void *ptr);
The talloc_unlink() function removes a specific parent from ptr. The
ctx passed must either be a context used in talloc_reference() with
this pointer, or must be a direct parent of ptr.
Note that if the parent has already been removed using talloc_free()
then this function will fail and will return -1. Likewise, if ptr is
NULL, then the function will make no modifications and return -1.
Usually you can just use talloc_free() instead of talloc_unlink(), but
sometimes it is useful to have the additional control on which parent
is removed.
void talloc_set_destructor(const void *ptr, int (*destructor)(void *));
The function talloc_set_destructor() sets the destructor for the
pointer ptr. A destructor is a function that is called when the memory
used by a pointer is about to be released. The destructor receives ptr
as an argument, and should return 0 for success and -1 for failure.
The destructor can do anything it wants to, including freeing other
pieces of memory. A common use for destructors is to clean up operating
system resources (such as open file descriptors) contained in the
structure the destructor is placed on.
You can only place one destructor on a pointer. If you need more than
one destructor then you can create a zero-length child of the pointer
and place an additional destructor on that.
To remove a destructor call talloc_set_destructor() with NULL for the
destructor.
If your destructor attempts to talloc_free() the pointer that it is the
destructor for then talloc_free() will return -1 and the free will be
ignored. This would be a pointless operation anyway, as the destructor
is only called when the memory is just about to go away.
int talloc_increase_ref_count(const void *ptr);
The talloc_increase_ref_count(ptr) function is exactly equivalent to:
talloc_reference(NULL, ptr);
You can use either syntax, depending on which you think is clearer in
your code.
It returns 0 on success and -1 on failure.
size_t talloc_reference_count(const void *ptr);
Return the number of references to the pointer.
void talloc_set_name(const void *ptr, const char *fmt, ...);
Each talloc pointer has a "name". The name is used principally for
debugging purposes, although it is also possible to set and get the
name on a pointer in as a way of "marking" pointers in your code.
The main use for names on pointer is for "talloc reports". See
"talloc_report_depth_cb()", "talloc_report_depth_file()",
"talloc_report()" "talloc_report()" and "talloc_report_full()" for
details. Also see "talloc_enable_leak_report()" and
"talloc_enable_leak_report_full()".
The talloc_set_name() function allocates memory as a child of the
pointer. It is logically equivalent to:
talloc_set_name_const(ptr, talloc_asprintf(ptr, fmt, ...));
Note that multiple calls to talloc_set_name() will allocate more memory
without releasing the name. All of the memory is released when the ptr
is freed using talloc_free().
void talloc_set_name_const(const void *ptr, const char *name);
The function talloc_set_name_const() is just like talloc_set_name(),
but it takes a string constant, and is much faster. It is extensively
used by the "auto naming" macros, such as talloc_p().
This function does not allocate any memory. It just copies the supplied
pointer into the internal representation of the talloc ptr. This means
you must not pass a name pointer to memory that will disappear before
ptr is freed with talloc_free().
void *talloc_named(const void *ctx, size_t size, const char *fmt, ...);
The talloc_named() function creates a named talloc pointer. It is
equivalent to:
ptr = talloc_size(ctx, size);
talloc_set_name(ptr, fmt, ....);
void *talloc_named_const(const void *ctx, size_t size, const char *name);
This is equivalent to:
ptr = talloc_size(ctx, size);
talloc_set_name_const(ptr, name);
const char *talloc_get_name(const void *ptr);
This returns the current name for the given talloc pointer, ptr. See
"talloc_set_name()" for details.
void *talloc_init(const char *fmt, ...);
This function creates a zero length named talloc context as a top level
context. It is equivalent to:
talloc_named(NULL, 0, fmt, ...);
void *talloc_new(void *ctx);
This is a utility macro that creates a new memory context hanging off
an existing context, automatically naming it "talloc_new: __location__"
where __location__ is the source line it is called from. It is
particularly useful for creating a new temporary working context.
(type *)talloc_realloc(const void *ctx, void *ptr, type, count);
The talloc_realloc() macro changes the size of a talloc pointer. It has
the following equivalences:
talloc_realloc(ctx, NULL, type, 1) ==> talloc(ctx, type);
talloc_realloc(ctx, ptr, type, 0) ==> talloc_free(ptr);
The ctx argument is only used if ptr is not NULL, otherwise it is
ignored.
talloc_realloc() returns the new pointer, or NULL on failure. The call
will fail either due to a lack of memory, or because the pointer has
more than one parent (see "talloc_reference()").
void *talloc_realloc_size(const void *ctx, void *ptr, size_t size);
the talloc_realloc_size() function is useful when the type is not known
so the type-safe talloc_realloc() cannot be used.
TYPE *talloc_steal(const void *new_ctx, const TYPE *ptr);
The talloc_steal() function changes the parent context of a talloc
pointer. It is typically used when the context that the pointer is
currently a child of is going to be freed and you wish to keep the
memory for a longer time.
The talloc_steal() function returns the pointer that you pass it. It
does not have any failure modes.
It is possible to produce loops in the parent/child relationship if you
are not careful with talloc_steal(). No guarantees are provided as to
your sanity or the safety of your data if you do this.
Note that if you try and call talloc_steal() on a pointer that has more
than one parent then the result is ambiguous. Talloc will choose to
remove the parent that is currently indicated by talloc_parent() and
replace it with the chosen parent. You will also get a message like
this via the talloc logging functions:
WARNING: talloc_steal with references at some_dir/source/foo.c:123
reference at some_dir/source/other.c:325
reference at some_dir/source/third.c:121
To unambiguously change the parent of a pointer please see the function
"talloc_reparent()". See the talloc_set_log_fn() documentation for more
information on talloc logging.
TYPE *talloc_reparent(const void *old_parent, const void *new_parent, const
TYPE *ptr);
The talloc_reparent() function changes the parent context of a talloc
pointer. It is typically used when the context that the pointer is
currently a child of is going to be freed and you wish to keep the
memory for a longer time.
The talloc_reparent() function returns the pointer that you pass it. It
does not have any failure modes.
The difference between talloc_reparent() and talloc_steal() is that
talloc_reparent() can specify which parent you wish to change. This is
useful when a pointer has multiple parents via references.
TYPE *talloc_move(const void *new_ctx, TYPE **ptr);
The talloc_move() function is a wrapper around talloc_steal() which
zeros the source pointer after the move. This avoids a potential source
of bugs where a programmer leaves a pointer in two structures, and uses
the pointer from the old structure after it has been moved to a new
one.
size_t talloc_total_size(const void *ptr);
The talloc_total_size() function returns the total size in bytes used
by this pointer and all child pointers. Mostly useful for debugging.
Passing NULL is allowed, but it will only give a meaningful result if
talloc_enable_leak_report() or talloc_enable_leak_report_full() has
been called.
size_t talloc_total_blocks(const void *ptr);
The talloc_total_blocks() function returns the total memory block count
used by this pointer and all child pointers. Mostly useful for
debugging.
Passing NULL is allowed, but it will only give a meaningful result if
talloc_enable_leak_report() or talloc_enable_leak_report_full() has
been called.
void talloc_report(const void *ptr, FILE *f);
The talloc_report() function prints a summary report of all memory used
by ptr. One line of report is printed for each immediate child of ptr,
showing the total memory and number of blocks used by that child.
You can pass NULL for the pointer, in which case a report is printed
for the top level memory context, but only if
talloc_enable_leak_report() or talloc_enable_leak_report_full() has
been called.
void talloc_report_full(const void *ptr, FILE *f);
This provides a more detailed report than talloc_report(). It will
recursively print the entire tree of memory referenced by the pointer.
References in the tree are shown by giving the name of the pointer that
is referenced.
You can pass NULL for the pointer, in which case a report is printed
for the top level memory context, but only if
talloc_enable_leak_report() or talloc_enable_leak_report_full() has
been called.
void talloc_report_depth_cb(const void *ptr, int depth, int max_depth,
void (*callback)(const void *ptr, int depth, int max_depth, int is_ref, void *priv),
void *priv);
This provides a more flexible reports than talloc_report(). It will
recursively call the callback for the entire tree of memory referenced
by the pointer. References in the tree are passed with is_ref = 1 and
the pointer that is referenced.
You can pass NULL for the pointer, in which case a report is printed
for the top level memory context, but only if
talloc_enable_leak_report() or talloc_enable_leak_report_full() has
been called.
The recursion is stopped when depth >= max_depth. max_depth = -1 means
only stop at leaf nodes.
void talloc_report_depth_file(const void *ptr, int depth,
int max_depth, FILE *f);
This provides a more flexible reports than talloc_report(). It will let
you specify the depth and max_depth.
void talloc_enable_leak_report(void);
This enables calling of talloc_report(NULL, stderr) when the program
exits. In Samba4 this is enabled by using the --leak-report command
line option.
For it to be useful, this function must be called before any other
talloc function as it establishes a "null context" that acts as the top
of the tree. If you don't call this function first then passing NULL to
talloc_report() or talloc_report_full() won't give you the full tree
printout.
Here is a typical talloc report:
talloc report on 'null_context' (total 267 bytes in 15 blocks)
libcli/auth/spnego_parse.c:55 contains 31 bytes in 2 blocks
libcli/auth/spnego_parse.c:55 contains 31 bytes in 2 blocks
iconv(UTF8,CP850) contains 42 bytes in 2 blocks
libcli/auth/spnego_parse.c:55 contains 31 bytes in 2 blocks
iconv(CP850,UTF8) contains 42 bytes in 2 blocks
iconv(UTF8,UTF-16LE) contains 45 bytes in 2 blocks
iconv(UTF-16LE,UTF8) contains 45 bytes in 2 blocks
void talloc_enable_leak_report_full(void);
This enables calling of talloc_report_full(NULL, stderr) when the
program exits. In Samba4 this is enabled by using the
--leak-report-full command line option.
For it to be useful, this function must be called before any other
talloc function as it establishes a "null context" that acts as the top
of the tree. If you don't call this function first then passing NULL to
talloc_report() or talloc_report_full() won't give you the full tree
printout.
Here is a typical full report:
full talloc report on 'root' (total 18 bytes in 8 blocks)
p1 contains 18 bytes in 7 blocks (ref 0)
r1 contains 13 bytes in 2 blocks (ref 0)
reference to: p2
p2 contains 1 bytes in 1 blocks (ref 1)
x3 contains 1 bytes in 1 blocks (ref 0)
x2 contains 1 bytes in 1 blocks (ref 0)
x1 contains 1 bytes in 1 blocks (ref 0)
(type *)talloc_zero(const void *ctx, type);
The talloc_zero() macro is equivalent to:
ptr = talloc(ctx, type);
if (ptr) memset(ptr, 0, sizeof(type));
void *talloc_zero_size(const void *ctx, size_t size)
The talloc_zero_size() function is useful when you don't have a known
type.
void *talloc_memdup(const void *ctx, const void *p, size_t size);
The talloc_memdup() function is equivalent to:
ptr = talloc_size(ctx, size);
if (ptr) memcpy(ptr, p, size);
char *talloc_strdup(const void *ctx, const char *p);
The talloc_strdup() function is equivalent to:
ptr = talloc_size(ctx, strlen(p)+1);
if (ptr) memcpy(ptr, p, strlen(p)+1);
This function sets the name of the new pointer to the passed string.
This is equivalent to:
talloc_set_name_const(ptr, ptr)
char *talloc_strndup(const void *t, const char *p, size_t n);
The talloc_strndup() function is the talloc equivalent of the C library
function strndup(3).
This function sets the name of the new pointer to the passed string.
This is equivalent to:
talloc_set_name_const(ptr, ptr)
char *talloc_vasprintf(const void *t, const char *fmt, va_list ap);
The talloc_vasprintf() function is the talloc equivalent of the C
library function vasprintf(3).
This function sets the name of the new pointer to the new string. This
is equivalent to:
talloc_set_name_const(ptr, ptr)
char *talloc_asprintf(const void *t, const char *fmt, ...);
The talloc_asprintf() function is the talloc equivalent of the C
library function asprintf(3).
This function sets the name of the new pointer to the passed string.
This is equivalent to:
talloc_set_name_const(ptr, ptr)
char *talloc_asprintf_append(char *s, const char *fmt, ...);
The talloc_asprintf_append() function appends the given formatted
string to the given string.
This function sets the name of the new pointer to the new string. This
is equivalent to:
talloc_set_name_const(ptr, ptr)
(type *)talloc_array(const void *ctx, type, unsigned int count);
The talloc_array() macro is equivalent to:
(type *)talloc_size(ctx, sizeof(type) * count);
except that it provides integer overflow protection for the multiply,
returning NULL if the multiply overflows.
void *talloc_array_size(const void *ctx, size_t size, unsigned int count);
The talloc_array_size() function is useful when the type is not known.
It operates in the same way as talloc_array(), but takes a size instead
of a type.
(typeof(ptr)) talloc_array_ptrtype(const void *ctx, ptr, unsigned int
count);
The talloc_ptrtype() macro should be used when you have a pointer to an
array and want to allocate memory of an array to point at with this
pointer. When compiling with gcc >= 3 it is typesafe. Note this is a
wrapper of talloc_array_size() and talloc_get_name() will return the
current location in the source file. and not the type.
void *talloc_realloc_fn(const void *ctx, void *ptr, size_t size)
This is a non-macro version of talloc_realloc(), which is useful as
libraries sometimes want a realloc function pointer. A realloc(3)
implementation encapsulates the functionality of malloc(3), free(3) and
realloc(3) in one call, which is why it is useful to be able to pass
around a single function pointer.
void *talloc_autofree_context(void);
This is a handy utility function that returns a talloc context which
will be automatically freed on program exit. This can be used to reduce
the noise in memory leak reports.
void *talloc_check_name(const void *ptr, const char *name);
This function checks if a pointer has the specified name. If it does
then the pointer is returned. It it doesn't then NULL is returned.
(type *)talloc_get_type(const void *ptr, type);
This macro allows you to do type checking on talloc pointers. It is
particularly useful for void* private pointers. It is equivalent to
this:
(type *)talloc_check_name(ptr, #type)
talloc_set_type(const void *ptr, type);
This macro allows you to force the name of a pointer to be a particular
type. This can be used in conjunction with talloc_get_type() to do type
checking on void* pointers.
It is equivalent to this:
talloc_set_name_const(ptr, #type)
talloc_set_log_fn(void (*log_fn)(const char *message));
This function sets a logging function that talloc will use for warnings
and errors. By default talloc will not print any warnings or errors.
talloc_set_log_stderr(void);
This sets the talloc log function to write log messages to stderr
PERFORMANCE
All the additional features of talloc(3) over malloc(3) do come at a
price. We have a simple performance test in Samba4 that measures
talloc() versus malloc() performance, and it seems that talloc() is
about 10% slower than malloc() on my x86 Debian Linux box. For Samba,
the great reduction in code complexity that we get by using talloc
makes this worthwhile, especially as the total overhead of
talloc/malloc in Samba is already quite small.
SEE ALSO
malloc(3), strndup(3), vasprintf(3), asprintf(3),
http://talloc.samba.org/
AUTHOR
The original Samba software and related utilities were created by
Andrew Tridgell. Samba is now developed by the Samba Team as an Open
Source project similar to the way the Linux kernel is developed.
COPYRIGHT/LICENSE
Copyright (C) Andrew Tridgell 2004
This program is free software; you can redistribute it and/or modify it
under the terms of the GNU Lesser General Public License as published
by the Free Software Foundation; either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful, but
WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
General Public License for more details.
You should have received a copy of the GNU General Public License along
with this program; if not, see http://www.gnu.org/licenses/.
Samba 4.0 05/13/2015 TALLOC(3)