DragonFly On-Line Manual Pages
TAR(1) DragonFly General Commands Manual TAR(1)
NAME
tar - manipulate tape archives
SYNOPSIS
tar [bundled-flags <args>] [<file> | <pattern> ...]
tar {-c} [options] [files | directories]
tar {-r | -u} -f archive-file [options] [files | directories]
tar {-t | -x} [options] [patterns]
DESCRIPTION
tar creates and manipulates streaming archive files. This implementation
can extract from tar, pax, cpio, zip, jar, ar, xar, rpm, 7-zip, and ISO
9660 cdrom images and can create tar, pax, cpio, ar, zip, 7-zip, and shar
archives.
The first synopsis form shows a "bundled" option word. This usage is
provided for compatibility with historical implementations. See
COMPATIBILITY below for details.
The other synopsis forms show the preferred usage. The first option to
tar is a mode indicator from the following list:
-c Create a new archive containing the specified items. The long
option form is --create.
-r Like -c, but new entries are appended to the archive. Note that
this only works on uncompressed archives stored in regular files.
The -f option is required. The long option form is --append.
-t List archive contents to stdout. The long option form is --list.
-u Like -r, but new entries are added only if they have a
modification date newer than the corresponding entry in the
archive. Note that this only works on uncompressed archives
stored in regular files. The -f option is required. The long
form is --update.
-x Extract to disk from the archive. If a file with the same name
appears more than once in the archive, each copy will be
extracted, with later copies overwriting (replacing) earlier
copies. The long option form is --extract.
In -c, -r, or -u mode, each specified file or directory is added to the
archive in the order specified on the command line. By default, the
contents of each directory are also archived.
In extract or list mode, the entire command line is read and parsed
before the archive is opened. The pathnames or patterns on the command
line indicate which items in the archive should be processed. Patterns
are shell-style globbing patterns as documented in tcsh(1).
OPTIONS
Unless specifically stated otherwise, options are applicable in all
operating modes.
@archive
(c and r modes only) The specified archive is opened and the
entries in it will be appended to the current archive. As a
simple example,
tar -c -f - newfile @original.tar
writes a new archive to standard output containing a file newfile
and all of the entries from original.tar. In contrast,
tar -c -f - newfile original.tar
creates a new archive with only two entries. Similarly,
tar -czf - --format pax @-
reads an archive from standard input (whose format will be
determined automatically) and converts it into a gzip-compressed
pax-format archive on stdout. In this way, tar can be used to
convert archives from one format to another.
-a, --auto-compress
(c mode only) Use the archive suffix to decide a set of the
format and the compressions. As a simple example,
tar -a -cf archive.tgz source.c source.h
creates a new archive with restricted pax format and gzip
compression,
tar -a -cf archive.tar.bz2.uu source.c source.h
creates a new archive with restricted pax format and bzip2
compression and uuencode compression,
tar -a -cf archive.zip source.c source.h
creates a new archive with zip format,
tar -a -jcf archive.tgz source.c source.h
ignores the "-j" option, and creates a new archive with
restricted pax format and gzip compression,
tar -a -jcf archive.xxx source.c source.h
if it is unknown suffix or no suffix, creates a new archive with
restricted pax format and bzip2 compression.
--acls (c, r, u, x modes only) Archive or extract POSIX.1e or NFSv4
ACLs. This is the reverse of --no-acls and the default behavior
in c, r, and u modes (except on Mac OS X) or if tar is run in x
mode as root. On Mac OS X this option translates extended ACLs
to NFSv4 ACLs. To store extended ACLs the --mac-metadata option
is preferred.
-B, --read-full-blocks
Ignored for compatibility with other tar(1) implementations.
-b blocksize, --block-size blocksize
Specify the block size, in 512-byte records, for tape drive I/O.
As a rule, this argument is only needed when reading from or
writing to tape drives, and usually not even then as the default
block size of 20 records (10240 bytes) is very common.
-C directory, --cd directory, --directory directory
In c and r mode, this changes the directory before adding the
following files. In x mode, change directories after opening the
archive but before extracting entries from the archive.
--chroot
(x mode only) chroot() to the current directory after processing
any -C options and before extracting any files.
--clear-nochange-fflags
(x mode only) Before removing file system objects to replace
them, clear platform-specific file attributes or file flags that
might prevent removal.
--exclude pattern
Do not process files or directories that match the specified
pattern. Note that exclusions take precedence over patterns or
filenames specified on the command line.
--exclude-vcs
Do not process files or directories internally used by the
version control systems `Arch', `Bazaar', `CVS', `Darcs',
`Mercurial', `RCS', `SCCS', `SVN' and `git'.
--fflags
(c, r, u, x modes only) Archive or extract platform-specific file
attributes or file flags. This is the reverse of --no-fflags and
the default behavior in c, r, and u modes or if tar is run in x
mode as root.
--format format
(c, r, u mode only) Use the specified format for the created
archive. Supported formats include "cpio", "pax", "shar", and
"ustar". Other formats may also be supported; see
libarchive-formats(5) for more information about currently-
supported formats. In r and u modes, when extending an existing
archive, the format specified here must be compatible with the
format of the existing archive on disk.
-f file, --file file
Read the archive from or write the archive to the specified file.
The filename can be - for standard input or standard output. The
default varies by system; on FreeBSD, the default is /dev/sa0; on
Linux, the default is /dev/st0.
--gid id
Use the provided group id number. On extract, this overrides the
group id in the archive; the group name in the archive will be
ignored. On create, this overrides the group id read from disk;
if --gname is not also specified, the group name will be set to
match the group id.
--gname name
Use the provided group name. On extract, this overrides the
group name in the archive; if the provided group name does not
exist on the system, the group id (from the archive or from the
--gid option) will be used instead. On create, this sets the
group name that will be stored in the archive; the name will not
be verified against the system group database.
-H (c and r modes only) Symbolic links named on the command line
will be followed; the target of the link will be archived, not
the link itself.
-h (c and r modes only) Synonym for -L.
-I Synonym for -T.
--help Show usage.
--hfsCompression
(x mode only) Mac OS X specific (v10.6 or later). Compress
extracted regular files with HFS+ compression.
--ignore-zeros
An alias of --options read_concatenated_archives for
compatibility with GNU tar.
--include pattern
Process only files or directories that match the specified
pattern. Note that exclusions specified with --exclude take
precedence over inclusions. If no inclusions are explicitly
specified, all entries are processed by default. The --include
option is especially useful when filtering archives. For
example, the command
tar -c -f new.tar --include='*foo*' @old.tgz
creates a new archive new.tar containing only the entries from
old.tgz containing the string `foo'.
-J, --xz
(c mode only) Compress the resulting archive with xz(1). In
extract or list modes, this option is ignored. Note that this
tar implementation recognizes XZ compression automatically when
reading archives.
-j, --bzip, --bzip2, --bunzip2
(c mode only) Compress the resulting archive with bzip2(1). In
extract or list modes, this option is ignored. Note that this
tar implementation recognizes bzip2 compression automatically
when reading archives.
-k, --keep-old-files
(x mode only) Do not overwrite existing files. In particular, if
a file appears more than once in an archive, later copies will
not overwrite earlier copies.
--keep-newer-files
(x mode only) Do not overwrite existing files that are newer than
the versions appearing in the archive being extracted.
-L, --dereference
(c and r modes only) All symbolic links will be followed.
Normally, symbolic links are archived as such. With this option,
the target of the link will be archived instead.
-l, --check-links
(c and r modes only) Issue a warning message unless all links to
each file are archived.
--lrzip
(c mode only) Compress the resulting archive with lrzip(1). In
extract or list modes, this option is ignored. Note that this
tar implementation recognizes lrzip compression automatically
when reading archives.
--lz4 (c mode only) Compress the archive with lz4-compatible
compression before writing it. In extract or list modes, this
option is ignored. Note that this tar implementation recognizes
lz4 compression automatically when reading archives.
--zstd (c mode only) Compress the archive with zstd-compatible
compression before writing it. In extract or list modes, this
option is ignored. Note that this tar implementation recognizes
zstd compression automatically when reading archives.
--lzma (c mode only) Compress the resulting archive with the original
LZMA algorithm. In extract or list modes, this option is
ignored. Use of this option is discouraged and new archives
should be created with --xz instead. Note that this tar
implementation recognizes LZMA compression automatically when
reading archives.
--lzop (c mode only) Compress the resulting archive with lzop(1). In
extract or list modes, this option is ignored. Note that this
tar implementation recognizes LZO compression automatically when
reading archives.
-m, --modification-time
(x mode only) Do not extract modification time. By default, the
modification time is set to the time stored in the archive.
--mac-metadata
(c, r, u and x mode only) Mac OS X specific. Archive or extract
extended ACLs and extended file attributes using copyfile(3) in
AppleDouble format. This is the reverse of --no-mac-metadata.
and the default behavior in c, r, and u modes or if tar is run in
x mode as root.
-n, --norecurse, --no-recursion
Do not operate recursively on the content of directories.
--newer date
(c, r, u modes only) Only include files and directories newer
than the specified date. This compares ctime entries.
--newer-mtime date
(c, r, u modes only) Like --newer, except it compares mtime
entries instead of ctime entries.
--newer-than file
(c, r, u modes only) Only include files and directories newer
than the specified file. This compares ctime entries.
--newer-mtime-than file
(c, r, u modes only) Like --newer-than, except it compares mtime
entries instead of ctime entries.
--nodump
(c and r modes only) Honor the nodump file flag by skipping this
file.
--nopreserveHFSCompression
(x mode only) Mac OS X specific (v10.6 or later). Do not compress
extracted regular files which were compressed with HFS+
compression before archived. By default, compress the regular
files again with HFS+ compression.
--null (use with -I or -T) Filenames or patterns are separated by null
characters, not by newlines. This is often used to read
filenames output by the -print0 option to find(1).
--no-acls
(c, r, u, x modes only) Do not archive or extract POSIX.1e or
NFSv4 ACLs. This is the reverse of --acls and the default
behavior if tar is run as non-root in x mode (on Mac OS X as any
user in c, r, u and x modes).
--no-fflags
(c, r, u, x modes only) Do not archive or extract file attributes
or file flags. This is the reverse of --fflags and the default
behavior if tar is run as non-root in x mode.
--no-mac-metadata
(x mode only) Mac OS X specific. Do not archive or extract ACLs
and extended file attributes using copyfile(3) in AppleDouble
format. This is the reverse of --mac-metadata. and the default
behavior if tar is run as non-root in x mode.
--no-read-sparse
(c, r, u modes only) Do not read sparse file information from
disk. This is the reverse of --read-sparse.
--no-safe-writes
(x mode only) Do not create temporary files and use rename(2) to
replace the original ones. This is the reverse of --safe-writes.
--no-same-owner
(x mode only) Do not extract owner and group IDs. This is the
reverse of --same-owner and the default behavior if tar is run as
non-root.
--no-same-permissions
(x mode only) Do not extract full permissions (SGID, SUID, sticky
bit, file attributes or file flags, extended file attributes and
ACLs). This is the reverse of -p and the default behavior if tar
is run as non-root.
--no-xattrs
(c, r, u, x modes only) Do not archive or extract extended file
attributes. This is the reverse of --xattrs and the default
behavior if tar is run as non-root in x mode.
--numeric-owner
This is equivalent to --uname "" --gname "". On extract, it
causes user and group names in the archive to be ignored in favor
of the numeric user and group ids. On create, it causes user and
group names to not be stored in the archive.
-O, --to-stdout
(x, t modes only) In extract (-x) mode, files will be written to
standard out rather than being extracted to disk. In list (-t)
mode, the file listing will be written to stderr rather than the
usual stdout.
-o (x mode) Use the user and group of the user running the program
rather than those specified in the archive. Note that this has
no significance unless -p is specified, and the program is being
run by the root user. In this case, the file modes and flags
from the archive will be restored, but ACLs or owner information
in the archive will be discarded.
-o (c, r, u mode) A synonym for --format ustar
--older date
(c, r, u modes only) Only include files and directories older
than the specified date. This compares ctime entries.
--older-mtime date
(c, r, u modes only) Like --older, except it compares mtime
entries instead of ctime entries.
--older-than file
(c, r, u modes only) Only include files and directories older
than the specified file. This compares ctime entries.
--older-mtime-than file
(c, r, u modes only) Like --older-than, except it compares mtime
entries instead of ctime entries.
--one-file-system
(c, r, and u modes) Do not cross mount points.
--options options
Select optional behaviors for particular modules. The argument
is a text string containing comma-separated keywords and values.
These are passed to the modules that handle particular formats to
control how those formats will behave. Each option has one of
the following forms:
key=value
The key will be set to the specified value in every
module that supports it. Modules that do not support
this key will ignore it.
key The key will be enabled in every module that supports it.
This is equivalent to key=1.
!key The key will be disabled in every module that supports
it.
module:key=value, module:key, module:!key
As above, but the corresponding key and value will be
provided only to modules whose name matches module.
The complete list of supported modules and keys for create and
append modes is in archive_write_set_options(3) and for extract
and list modes in archive_read_set_options(3).
Examples of supported options:
iso9660:joliet
Support Joliet extensions. This is enabled by default,
use !joliet or iso9660:!joliet to disable.
iso9660:rockridge
Support Rock Ridge extensions. This is enabled by
default, use !rockridge or iso9660:!rockridge to disable.
gzip:compression-level
A decimal integer from 1 to 9 specifying the gzip
compression level.
gzip:timestamp
Store timestamp. This is enabled by default, use
!timestamp or gzip:!timestamp to disable.
lrzip:compression=type
Use type as compression method. Supported values are
bzip2, gzip, lzo (ultra fast), and zpaq (best, extremely
slow).
lrzip:compression-level
A decimal integer from 1 to 9 specifying the lrzip
compression level.
lz4:compression-level
A decimal integer from 1 to 9 specifying the lzop
compression level.
lz4:stream-checksum
Enable stream checksum. This is by default, use
lz4:!stream-checksum to disable.
lz4:block-checksum
Enable block checksum (Disabled by default).
lz4:block-size
A decimal integer from 4 to 7 specifying the lz4
compression block size (7 is set by default).
lz4:block-dependence
Use the previous block of the block being compressed for
a compression dictionary to improve compression ratio.
zstd:compression-level
A decimal integer specifying the zstd compression level.
Supported values depend on the library version, common
values are from 1 to 22.
zstd:threads
Specify the number of worker threads to use. Setting
threads to a special value 0 makes zstd(1) use as many
threads as there are CPU cores on the system.
lzop:compression-level
A decimal integer from 1 to 9 specifying the lzop
compression level.
xz:compression-level
A decimal integer from 0 to 9 specifying the xz
compression level.
xz:threads
Specify the number of worker threads to use. Setting
threads to a special value 0 makes xz(1) use as many
threads as there are CPU cores on the system.
mtree:keyword
The mtree writer module allows you to specify which mtree
keywords will be included in the output. Supported
keywords include: cksum, device, flags, gid, gname,
indent, link, md5, mode, nlink, rmd160, sha1, sha256,
sha384, sha512, size, time, uid, uname. The default is
equivalent to: "device, flags, gid, gname, link, mode,
nlink, size, time, type, uid, uname".
mtree:all
Enables all of the above keywords. You can also use
mtree:!all to disable all keywords.
mtree:use-set
Enable generation of /set lines in the output.
mtree:indent
Produce human-readable output by indenting options and
splitting lines to fit into 80 columns.
zip:compression=type
Use type as compression method. Supported values are
store (uncompressed) and deflate (gzip algorithm).
zip:encryption
Enable encryption using traditional zip encryption.
zip:encryption=type
Use type as encryption type. Supported values are
zipcrypt (traditional zip encryption), aes128 (WinZip
AES-128 encryption) and aes256 (WinZip AES-256
encryption).
read_concatenated_archives
Ignore zeroed blocks in the archive, which occurs when
multiple tar archives have been concatenated together.
Without this option, only the contents of the first
concatenated archive would be read. This option is
comparable to the -i, --ignore-zeros option of GNU tar.
If a provided option is not supported by any module, that is a
fatal error.
-P, --absolute-paths
Preserve pathnames. By default, absolute pathnames (those that
begin with a / character) have the leading slash removed both
when creating archives and extracting from them. Also, tar will
refuse to extract archive entries whose pathnames contain .. or
whose target directory would be altered by a symlink. This
option suppresses these behaviors.
-p, --insecure, --preserve-permissions
(x mode only) Preserve file permissions. Attempt to restore the
full permissions, including file modes, file attributes or file
flags, extended file attributes and ACLs, if available, for each
item extracted from the archive. This is the reverse of
--no-same-permissions and the default if tar is being run as
root. It can be partially overridden by also specifying
--no-acls, --no-fflags, --no-mac-metadata or --no-xattrs.
--passphrase passphrase
The passphrase is used to extract or create an encrypted archive.
Currently, zip is the only supported format that supports
encryption. You shouldn't use this option unless you realize how
insecure use of this option is.
--posix
(c, r, u mode only) Synonym for --format pax
-q, --fast-read
(x and t mode only) Extract or list only the first archive entry
that matches each pattern or filename operand. Exit as soon as
each specified pattern or filename has been matched. By default,
the archive is always read to the very end, since there can be
multiple entries with the same name and, by convention, later
entries overwrite earlier entries. This option is provided as a
performance optimization.
--read-sparse
(c, r, u modes only) Read sparse file information from disk.
This is the reverse of --no-read-sparse and the default behavior.
-S (x mode only) Extract files as sparse files. For every block on
disk, check first if it contains only NULL bytes and seek over it
otherwise. This works similar to the conv=sparse option of dd.
-s pattern
Modify file or archive member names according to pattern. The
pattern has the format /old/new/[ghHprRsS] where old is a basic
regular expression, new is the replacement string of the matched
part, and the optional trailing letters modify how the
replacement is handled. If old is not matched, the pattern is
skipped. Within new, ~ is substituted with the match, \1 to \9
with the content of the corresponding captured group. The
optional trailing g specifies that matching should continue after
the matched part and stop on the first unmatched pattern. The
optional trailing s specifies that the pattern applies to the
value of symbolic links. The optional trailing p specifies that
after a successful substitution the original path name and the
new path name should be printed to standard error. Optional
trailing H, R, or S characters suppress substitutions for
hardlink targets, regular filenames, or symlink targets,
respectively. Optional trailing h, r, or s characters enable
substitutions for hardlink targets, regular filenames, or symlink
targets, respectively. The default is hrs which applies
substitutions to all names. In particular, it is never necessary
to specify h, r, or s.
--safe-writes
(x mode only) Extract files atomically. By default tar unlinks
the original file with the same name as the extracted file (if it
exists), and then creates it immediately under the same name and
writes to it. For a short period of time, applications trying to
access the file might not find it, or see incomplete results. If
--safe-writes is enabled, tar first creates a unique temporary
file, then writes the new contents to the temporary file, and
finally renames the temporary file to its final name atomically
using rename(2). This guarantees that an application accessing
the file, will either see the old contents or the new contents at
all times.
--same-owner
(x mode only) Extract owner and group IDs. This is the reverse
of --no-same-owner and the default behavior if tar is run as
root.
--strip-components count
Remove the specified number of leading path elements. Pathnames
with fewer elements will be silently skipped. Note that the
pathname is edited after checking inclusion/exclusion patterns
but before security checks.
-T filename, --files-from filename
In x or t mode, tar will read the list of names to be extracted
from filename. In c mode, tar will read names to be archived
from filename. The special name "-C" on a line by itself will
cause the current directory to be changed to the directory
specified on the following line. Names are terminated by
newlines unless --null is specified. Note that --null also
disables the special handling of lines containing "-C". Note:
If you are generating lists of files using find(1), you probably
want to use -n as well.
--totals
(c, r, u modes only) After archiving all files, print a summary
to stderr.
-U, --unlink, --unlink-first
(x mode only) Unlink files before creating them. This can be a
minor performance optimization if most files already exist, but
can make things slower if most files do not already exist. This
flag also causes tar to remove intervening directory symlinks
instead of reporting an error. See the SECURITY section below
for more details.
--uid id
Use the provided user id number and ignore the user name from the
archive. On create, if --uname is not also specified, the user
name will be set to match the user id.
--uname name
Use the provided user name. On extract, this overrides the user
name in the archive; if the provided user name does not exist on
the system, it will be ignored and the user id (from the archive
or from the --uid option) will be used instead. On create, this
sets the user name that will be stored in the archive; the name
is not verified against the system user database.
--use-compress-program program
Pipe the input (in x or t mode) or the output (in c mode) through
program instead of using the builtin compression support.
-v, --verbose
Produce verbose output. In create and extract modes, tar will
list each file name as it is read from or written to the archive.
In list mode, tar will produce output similar to that of ls(1).
An additional -v option will also provide ls-like details in
create and extract mode.
--version
Print version of tar and libarchive, and exit.
-w, --confirmation, --interactive
Ask for confirmation for every action.
-X filename, --exclude-from filename
Read a list of exclusion patterns from the specified file. See
--exclude for more information about the handling of exclusions.
--xattrs
(c, r, u, x modes only) Archive or extract extended file
attributes. This is the reverse of --no-xattrs and the default
behavior in c, r, and u modes or if tar is run in x mode as root.
-y (c mode only) Compress the resulting archive with bzip2(1). In
extract or list modes, this option is ignored. Note that this
tar implementation recognizes bzip2 compression automatically
when reading archives.
-Z, --compress, --uncompress
(c mode only) Compress the resulting archive with compress(1).
In extract or list modes, this option is ignored. Note that this
tar implementation recognizes compress compression automatically
when reading archives.
-z, --gunzip, --gzip
(c mode only) Compress the resulting archive with gzip(1). In
extract or list modes, this option is ignored. Note that this
tar implementation recognizes gzip compression automatically when
reading archives.
ENVIRONMENT
The following environment variables affect the execution of tar:
TAR_READER_OPTIONS
The default options for format readers and compression
readers. The --options option overrides this.
TAR_WRITER_OPTIONS
The default options for format writers and compression
writers. The --options option overrides this.
LANG The locale to use. See environ(7) for more information.
TAPE The default device. The -f option overrides this. Please
see the description of the -f option above for more
details.
TZ The timezone to use when displaying dates. See environ(7)
for more information.
EXIT STATUS
The tar utility exits 0 on success, and >0 if an error occurs.
EXAMPLES
The following creates a new archive called file.tar.gz that contains two
files source.c and source.h:
tar -czf file.tar.gz source.c source.h
To view a detailed table of contents for this archive:
tar -tvf file.tar.gz
To extract all entries from the archive on the default tape drive:
tar -x
To examine the contents of an ISO 9660 cdrom image:
tar -tf image.iso
To move file hierarchies, invoke tar as
tar -cf - -C srcdir . | tar -xpf - -C destdir
or more traditionally
cd srcdir ; tar -cf - . | (cd destdir ; tar -xpf -)
In create mode, the list of files and directories to be archived can also
include directory change instructions of the form -Cfoo/baz and archive
inclusions of the form @archive-file. For example, the command line
tar -c -f new.tar foo1 @old.tgz -C/tmp foo2
will create a new archive new.tar. tar will read the file foo1 from the
current directory and add it to the output archive. It will then read
each entry from old.tgz and add those entries to the output archive.
Finally, it will switch to the /tmp directory and add foo2 to the output
archive.
An input file in mtree(5) format can be used to create an output archive
with arbitrary ownership, permissions, or names that differ from existing
data on disk:
$ cat input.mtree
#mtree
usr/bin uid=0 gid=0 mode=0755 type=dir
usr/bin/ls uid=0 gid=0 mode=0755 type=file content=myls
$ tar -cvf output.tar @input.mtree
The --newer and --newer-mtime switches accept a variety of common date
and time specifications, including "12 Mar 2005 7:14:29pm", "2005-03-12
19:14", "5 minutes ago", and "19:14 PST May 1".
The --options argument can be used to control various details of archive
generation or reading. For example, you can generate mtree output which
only contains type, time, and uid keywords:
tar -cf file.tar --format=mtree --options='!all,type,time,uid' dir
or you can set the compression level used by gzip or xz compression:
tar -czf file.tar --options='compression-level=9'.
For more details, see the explanation of the archive_read_set_options()
and archive_write_set_options() API calls that are described in
archive_read(3) and archive_write(3).
COMPATIBILITY
The bundled-arguments format is supported for compatibility with historic
implementations. It consists of an initial word (with no leading -
character) in which each character indicates an option. Arguments follow
as separate words. The order of the arguments must match the order of
the corresponding characters in the bundled command word. For example,
tar tbf 32 file.tar
specifies three flags t, b, and f. The b and f flags both require
arguments, so there must be two additional items on the command line.
The 32 is the argument to the b flag, and file.tar is the argument to the
f flag.
The mode options c, r, t, u, and x and the options b, f, l, m, o, v, and
w comply with SUSv2.
For maximum portability, scripts that invoke tar should use the bundled-
argument format above, should limit themselves to the c, t, and x modes,
and the b, f, m, v, and w options.
Additional long options are provided to improve compatibility with other
tar implementations.
SECURITY
Certain security issues are common to many archiving programs, including
tar. In particular, carefully-crafted archives can request that tar
extract files to locations outside of the target directory. This can
potentially be used to cause unwitting users to overwrite files they did
not intend to overwrite. If the archive is being extracted by the
superuser, any file on the system can potentially be overwritten. There
are three ways this can happen. Although tar has mechanisms to protect
against each one, savvy users should be aware of the implications:
* Archive entries can have absolute pathnames. By default, tar
removes the leading / character from filenames before restoring
them to guard against this problem.
* Archive entries can have pathnames that include .. components.
By default, tar will not extract files containing .. components
in their pathname.
* Archive entries can exploit symbolic links to restore files to
other directories. An archive can restore a symbolic link to
another directory, then use that link to restore a file into that
directory. To guard against this, tar checks each extracted path
for symlinks. If the final path element is a symlink, it will be
removed and replaced with the archive entry. If -U is specified,
any intermediate symlink will also be unconditionally removed.
If neither -U nor -P is specified, tar will refuse to extract the
entry.
To protect yourself, you should be wary of any archives that come from
untrusted sources. You should examine the contents of an archive with
tar -tf filename
before extraction. You should use the -k option to ensure that tar will
not overwrite any existing files or the -U option to remove any pre-
existing files. You should generally not extract archives while running
with super-user privileges. Note that the -P option to tar disables the
security checks above and allows you to extract an archive while
preserving any absolute pathnames, .. components, or symlinks to other
directories.
SEE ALSO
bzip2(1), compress(1), cpio(1), gzip(1), mt(1), pax(1), shar(1), xz(1),
libarchive(3), libarchive-formats(5), tar(5)
STANDARDS
There is no current POSIX standard for the tar command; it appeared in
ISO/IEC 9945-1:1996 ("POSIX.1") but was dropped from IEEE Std 1003.1-2001
("POSIX.1"). The options supported by this implementation were developed
by surveying a number of existing tar implementations as well as the old
POSIX specification for tar and the current POSIX specification for pax.
The ustar and pax interchange file formats are defined by IEEE Std
1003.1-2001 ("POSIX.1") for the pax command.
HISTORY
A tar command appeared in Seventh Edition Unix, which was released in
January, 1979. There have been numerous other implementations, many of
which extended the file format. John Gilmore's pdtar public-domain
implementation (circa November, 1987) was quite influential, and formed
the basis of GNU tar. GNU tar was included as the standard system tar in
FreeBSD beginning with FreeBSD 1.0.
This is a complete re-implementation based on the libarchive(3) library.
It was first released with FreeBSD 5.4 in May, 2005.
BUGS
This program follows ISO/IEC 9945-1:1996 ("POSIX.1") for the definition
of the -l option. Note that GNU tar prior to version 1.15 treated -l as
a synonym for the --one-file-system option.
The -C dir option may differ from historic implementations.
All archive output is written in correctly-sized blocks, even if the
output is being compressed. Whether or not the last output block is
padded to a full block size varies depending on the format and the output
device. For tar and cpio formats, the last block of output is padded to
a full block size if the output is being written to standard output or to
a character or block device such as a tape drive. If the output is being
written to a regular file, the last block will not be padded. Many
compressors, including gzip(1) and bzip2(1), complain about the null
padding when decompressing an archive created by tar, although they still
extract it correctly.
The compression and decompression is implemented internally, so there may
be insignificant differences between the compressed output generated by
tar -czf - file
and that generated by
tar -cf - file | gzip
The default should be to read and write archives to the standard I/O
paths, but tradition (and POSIX) dictates otherwise.
The r and u modes require that the archive be uncompressed and located in
a regular file on disk. Other archives can be modified using c mode with
the @archive-file extension.
To archive a file called @foo or -foo you must specify it as ./@foo or
./-foo, respectively.
In create mode, a leading ./ is always removed. A leading / is stripped
unless the -P option is specified.
There needs to be better support for file selection on both create and
extract.
There is not yet any support for multi-volume archives.
Converting between dissimilar archive formats (such as tar and cpio)
using the @- convention can cause hard link information to be lost.
(This is a consequence of the incompatible ways that different archive
formats store hardlink information.)
DragonFly 6.3-DEVELOPMENT January 31, 2020 DragonFly 6.3-DEVELOPMENT