DragonFly On-Line Manual Pages
FTPD(8) DragonFly System Manager's Manual FTPD(8)
ftpd - Internet File Transfer Protocol server
ftpd [-468ADdEhMmOoRrSUvW] [-l [-l]] [-a address] [-H host] [-P port]
[-p file] [-T maxtimeout] [-t timeout] [-u umask]
The ftpd utility is the Internet File Transfer Protocol server process.
The server uses the TCP protocol and listens at the port specified with
the -P option or in the "ftp" service specification; see services(5).
-4 When -D is specified, accept connections via AF_INET socket.
-6 When -D is specified, accept connections via AF_INET6 socket.
-8 Enable transparent UTF-8 mode. RFC 2640 compliant clients will
be told that the character encoding used by the server is UTF-8,
which is the only effect of the option.
This option does not enable any encoding conversion for server
file names; it implies instead that the names of files on the
server are encoded in UTF-8. As for files uploaded via FTP, it
is the duty of the RFC 2640 compliant client to convert their
names from the client's local encoding to UTF-8. FTP command
names and own ftpd messages are always encoded in ASCII, which is
a subset of UTF-8. Hence no need for server-side conversion at
-A Allow only anonymous ftp access.
-a When -D is specified, accept connections only on the specified
-D With this option set, ftpd will detach and become a daemon,
accepting connections on the FTP port and forking children
processes to handle them. This is lower overhead than starting
ftpd from inetd(8) and is thus useful on busy servers to reduce
-d Debugging information is written to the syslog using LOG_FTP.
-E Disable the EPSV command. This is useful for servers behind
-h Disable printing host-specific information, such as the server
software version or hostname, in server messages.
-H Advertise the hostname as host instead of using the value of
-l Each successful and failed ftp(1) session is logged using syslog
with a facility of LOG_FTP. If this option is specified twice,
the retrieve (get), store (put), append, delete, make directory,
remove directory and rename operations and their filename
arguments are also logged. By default, syslogd(8) logs these to
-M Prevent anonymous users from creating directories.
-m Permit anonymous users to overwrite or modify existing files if
allowed by file system permissions. By default, anonymous users
cannot modify existing files; in particular, files to upload will
be created under a unique name.
-O Put server in write-only mode for anonymous users only. RETR is
disabled for anonymous users, preventing anonymous downloads.
This has no effect if -o is also specified.
-o Put server in write-only mode. RETR is disabled, preventing
-P When -D is specified, accept connections at port, specified as a
numeric value or service name, instead of at the default "ftp"
-p When -D is specified, write the daemon's process ID to file
instead of the default pid file, /var/run/ftpd.pid.
-R With this option set, ftpd will revert to historical behavior
with regard to security checks on user operations and
restrictions on PORT requests. Currently, ftpd will only honor
PORT commands directed to unprivileged ports on the remote user's
host (which violates the FTP protocol specification but closes
some security holes).
-r Put server in read-only mode. All commands which may modify the
local file system are disabled.
-S With this option set, ftpd logs all anonymous file downloads to
the file /var/log/ftpd when this file exists.
-T A client may also request a different timeout period; the maximum
period allowed may be set to timeout seconds with the -T option.
The default limit is 2 hours.
-t The inactivity timeout period is set to timeout seconds (the
default is 15 minutes).
-U This option instructs ftpd to use data ports in the range of
IP_PORTRANGE_DEFAULT instead of in the range of
IP_PORTRANGE_HIGH. Such a change may be useful for some specific
firewall configurations; see ip(4) for more information.
Note that option is a virtual no-op in FreeBSD 5.0 and above;
both port ranges are identical by default.
-u The default file creation mode mask is set to umask, which is
expected to be an octal numeric value. Refer to umask(2) for
details. This option may be overridden by login.conf(5).
-v A synonym for -d.
-W Do not log FTP sessions to /var/log/wtmpx.
The file /var/run/nologin can be used to disable ftp access. If the file
exists, ftpd displays it and exits. If the file /etc/ftpwelcome exists,
ftpd prints it before issuing the "ready" message. If the file
/etc/ftpmotd exists, ftpd prints it after a successful login. Note the
motd file used is the one relative to the login environment. This means
the one in ~ftp/etc in the anonymous user's case.
The ftp server currently supports the following ftp requests. The case
of the requests is ignored. Requests marked [RW] are disabled if -r is
ABOR abort previous command
ACCT specify account (ignored)
ALLO allocate storage (vacuously)
APPE append to a file [RW]
CDUP change to parent of current working directory
CWD change working directory
DELE delete a file [RW]
EPRT specify data connection port, multiprotocol
EPSV prepare for server-to-server transfer, multiprotocol
FEAT give information on extended features of server
HELP give help information
LIST give list files in a directory ("ls -lgA")
LPRT specify data connection port, multiprotocol
LPSV prepare for server-to-server transfer, multiprotocol
MDTM show last modification time of file
MKD make a directory [RW]
MODE specify data transfer mode
NLST give name list of files in directory
NOOP do nothing
PASS specify password
PASV prepare for server-to-server transfer
PORT specify data connection port
PWD print the current working directory
QUIT terminate session
REST restart incomplete transfer
RETR retrieve a file
RMD remove a directory [RW]
RNFR specify rename-from file name [RW]
RNTO specify rename-to file name [RW]
SITE non-standard commands (see next section)
SIZE return size of file
STAT return status of server
STOR store a file [RW]
STOU store a file with a unique name [RW]
STRU specify data transfer structure
SYST show operating system type of server system
TYPE specify data transfer type
USER specify user name
XCUP change to parent of current working directory
XCWD change working directory (deprecated)
XMKD make a directory (deprecated) [RW]
XPWD print the current working directory (deprecated)
XRMD remove a directory (deprecated) [RW]
The following non-standard or UNIX specific commands are supported by the
UMASK change umask, e.g. ``SITE UMASK 002''
IDLE set idle-timer, e.g. ``SITE IDLE 60''
CHMOD change mode of a file [RW], e.g. ``SITE CHMOD 755
MD5 report the files MD5 checksum, e.g. ``SITE MD5
HELP give help information
Note: SITE requests are disabled in case of anonymous logins.
The remaining ftp requests specified in Internet RFC 959 are recognized,
but not implemented. MDTM and SIZE are not specified in RFC 959, but
will appear in the next updated FTP RFC. To avoid possible denial-of-
service attacks, SIZE requests against files larger than 10240 bytes will
be denied if the current transfer type is ASCII.
The ftp server will abort an active file transfer only when the ABOR
command is preceded by a Telnet "Interrupt Process" (IP) signal and a
Telnet "Synch" signal in the command Telnet stream, as described in
Internet RFC 959. If a STAT command is received during a data transfer,
preceded by a Telnet IP and Synch, transfer status will be returned.
The ftpd utility interprets file names according to the "globbing"
conventions used by csh(1). This allows users to utilize the
The ftpd utility authenticates users according to six rules.
1. The login name must be in the password data base and not have
a null password. In this case a password must be provided by
the client before any file operations may be performed.
2. The login name must not appear in the file /etc/ftpusers.
3. The login name must not be a member of a group specified in
the file /etc/ftpusers. Entries in this file interpreted as
group names are prefixed by an "at" `@' sign.
4. The user must have a standard shell returned by
5. If the user name appears in the file /etc/ftpchroot, or the
user is a member of a group with a group entry in this file,
i.e., one prefixed with `@', the session's root will be
changed to the directory specified in this file or to the
user's login directory by chroot(2) as for an "anonymous" or
"ftp" account (see next item). See ftpchroot(5) for a
detailed description of the format of this file. This
facility may also be triggered by enabling the boolean "ftp-
chroot" capability in login.conf(5). However, the user must
still supply a password. This feature is intended as a
compromise between a fully anonymous account and a fully
privileged account. The account should also be set up as for
an anonymous account.
6. If the user name is "anonymous" or "ftp", an anonymous ftp
account must be present in the password file (user "ftp"). In
this case the user is allowed to log in by specifying any
password (by convention an email address for the user should
be used as the password). When the -S option is set, all
transfers are logged as well.
In the last case, ftpd takes special measures to restrict the client's
access privileges. The server performs a chroot(2) to the home directory
of the "ftp" user. As a special case if the "ftp" user's home directory
pathname contains the /./ separator, ftpd uses its left-hand side as the
name of the directory to do chroot(2) to, and its right-hand side to
change the current directory to afterwards. A typical example for this
case would be /usr/local/ftp/./pub. In order that system security is not
breached, it is recommended that the "ftp" subtree be constructed with
care, following these rules:
~ftp Make the home directory owned by "root" and unwritable by
~ftp/etc Make this directory owned by "root" and unwritable by
anyone (mode 555). The files pwd.db (see passwd(5)) and
group(5) must be present for the ls(1) command to be able
to produce owner names rather than numbers. The password
field in passwd(5) is not used, and should not contain
real passwords. The file ftpmotd, if present, will be
printed after a successful login. These files should be
~ftp/pub This directory and the subdirectories beneath it should
be owned by the users and groups responsible for placing
files in them, and be writable only by them (mode 755 or
775). They should not be owned or writable by "ftp" or
its group, otherwise guest users can fill the drive with
If the system has multiple IP addresses, ftpd supports the idea of
virtual hosts, which provides the ability to define multiple anonymous
ftp areas, each one allocated to a different internet address. The file
/etc/ftphosts contains information pertaining to each of the virtual
hosts. Each host is defined on its own line which contains a number of
fields separated by whitespace:
hostname Contains the hostname or IP address of the virtual host.
user Contains a user record in the system password file. As
with normal anonymous ftp, this user's access uid, gid
and group memberships determine file access to the
anonymous ftp area. The anonymous ftp area (to which any
user is chrooted on login) is determined by the home
directory defined for the account. User id and group for
any ftp account may be the same as for the standard ftp
statfile File to which all file transfers are logged, which
defaults to /var/log/ftpd.
welcome This file is the welcome message displayed before the
server ready prompt. It defaults to /etc/ftpwelcome.
motd This file is displayed after the user logs in. It
defaults to /etc/ftpmotd.
Lines beginning with a '#' are ignored and can be used to include
Defining a virtual host for the primary IP address or hostname changes
the default for ftp logins to that address. The 'user', 'statfile',
'welcome' and 'motd' fields may be left blank, or a single hyphen '-'
used to indicate that the default value is to be used.
As with any anonymous login configuration, due care must be given to
setup and maintenance to guard against security related problems.
The ftpd utility has internal support for handling remote requests to
list files, and will not execute /bin/ls in either a chrooted or non-
chrooted environment. The ~/bin/ls executable need not be placed into
the chrooted tree, nor need the ~/bin directory exist.
/etc/ftpusers List of unwelcome/restricted users.
/etc/ftpchroot List of normal users who should be chroot'd.
/etc/ftphosts Virtual hosting configuration file.
/etc/ftpwelcome Welcome notice.
/etc/ftpmotd Welcome notice after login.
/var/run/ftpd.pid Default pid file for daemon mode.
/var/run/nologin Displayed and access refused.
/var/log/ftpd Log file for anonymous transfers.
/var/log/xferlog Default place for session logs.
ftp(1), umask(2), getusershell(3), ftpchroot(5), login.conf(5), inetd(8),
The ftpd utility appeared in 4.2BSD. IPv6 support was added in WIDE
Hydrangea IPv6 stack kit.
The server must run as the super-user to create sockets with privileged
port numbers. It maintains an effective user id of the logged in user,
reverting to the super-user only when binding addresses to sockets. The
possible security holes have been extensively scrutinized, but are
DragonFly 5.7-DEVELOPMENT September 11, 2019 DragonFly 5.7-DEVELOPMENT