DragonFly On-Line Manual Pages
INETD(8) DragonFly System Manager's Manual INETD(8)
inetd -- internet ``super-server''
inetd [-d] [-l] [-w] [-W] [-c maximum] [-C rate] [-a address | hostname]
[-p filename] [-R rate] [-s maximum] [configuration file]
The inetd utility should be run at boot time by /etc/rc (see rc(8)). It
then listens for connections on certain internet sockets. When a
connection is found on one of its sockets, it decides what service the
socket corresponds to, and invokes a program to service the request. The
server program is invoked with the service socket as its standard input,
output and error descriptors. After the program is finished, inetd
continues to listen on the socket (except in some cases which will be
described below). Essentially, inetd allows running one daemon to invoke
several others, reducing load on the system.
The following options are available:
-d Turn on debugging.
-l Turn on logging of successful connections.
-w Turn on TCP Wrapping for external services. See the
IMPLEMENTATION NOTES section for more information on TCP Wrappers
-W Turn on TCP Wrapping for internal services which are built into
Specify the default maximum number of simultaneous invocations of
each service; the default is unlimited. May be overridden on a
per-service basis with the "max-child" parameter.
Specify the default maximum number of times a service can be
invoked from a single IP address in one minute; the default is
unlimited. May be overridden on a per-service basis with the
Specify the maximum number of times a service can be invoked in
one minute; the default is 256. A rate of 0 allows an unlimited
number of invocations.
Specify the default maximum number of simultaneous invocations of
each service from a single IP address; the default is unlimited.
May be overridden on a per-service basis with the "max-child-per-
-a Specify one specific IP address to bind to. Alternatively, a
hostname can be specified, in which case the IPv4 or IPv6 address
which corresponds to that hostname is used. Usually a hostname
is specified when inetd is run inside a jail(8), in which case
the hostname corresponds to the jail(8) environment.
When hostname specification is used and both IPv4 and IPv6
bindings are desired, one entry with the appropriate protocol
type for each binding is required for each service in
/etc/inetd.conf. For example, a TCP-based service would need two
entries, one using ``tcp4'' for the protocol and the other using
``tcp6''. See the explanation of the /etc/inetd.conf protocol
-p Specify an alternate file in which to store the process ID.
Upon execution, inetd reads its configuration information from a
configuration file which, by default, is /etc/inetd.conf. There must be
an entry for each field of the configuration file, with entries for each
field separated by a tab or a space. Comments are denoted by a ``#'' at
the beginning of a line. There must be an entry for each field. The
fields of the configuration file are as follows:
server program arguments
To specify an ONC RPC-based service, the entry would contain these
server program arguments
There are two types of services that inetd can start: standard and
TCPMUX. A standard service has a well-known port assigned to it; it may
be a service that implements an official Internet standard or is a
BSD-specific service. As described in RFC 1078, TCPMUX services are
nonstandard services that do not have a well-known port assigned to them.
They are invoked from inetd when a program connects to the ``tcpmux''
well-known port and specifies the service name. This feature is useful
for adding locally-developed servers. TCPMUX requests are only accepted
when the multiplexor service itself is enabled, above and beyond and
specific TCPMUX-based servers; see the discussion of internal services
The service-name entry is the name of a valid service in the file
/etc/services, or the specification of a UNIX domain socket (see below).
For ``internal'' services (discussed below), the service name should be
the official name of the service (that is, the first entry in
/etc/services). When used to specify an ONC RPC-based service, this
field is a valid RPC service name in the file /etc/rpc. The part on the
right of the ``/'' is the RPC version number. This can simply be a
single numeric argument or a range of versions. A range is bounded by
the low version to the high version - ``rusers/1-3''. For TCPMUX
services, the value of the service-name field consists of the string
``tcpmux'' followed by a slash and the locally-chosen service name. The
service names listed in /etc/services and the name ``help'' are reserved.
Try to choose unique names for your TCPMUX services by prefixing them
with your organization's name and suffixing them with a version number.
The socket-type should be one of ``stream'', ``dgram'', ``raw'', ``rdm'',
or ``seqpacket'', depending on whether the socket is a stream, datagram,
raw, reliably delivered message, or sequenced packet socket. TCPMUX
services must use ``stream''.
The protocol must be a valid protocol or ``unix''. Examples are ``tcp''
or ``udp'', both of which imply IPv4 for backward compatibility. The
names ``tcp4'' and ``udp4'' specify IPv4 only. The names ``tcp6'' and
``udp6'' specify IPv6 only. The names ``tcp46'' and ``udp46'' specify
that the entry accepts both IPv4 and IPv6 connections via a wildcard
AF_INET6 socket. If it is desired that the service is reachable via
T/TCP, one should specify ``tcp/ttcp'', which implies IPv4 for backward
compatibility. The name ``tcp4/ttcp'' specifies IPv4 only, while
``tcp6/ttcp'' specifies IPv6 only. The name ``tcp46/ttcp'' specify that
the entry accepts both IPv6 and IPv6 connections via a wildcard AF_INET6
socket. Rpc based services (for which only IPv4 is supported at this
time) are specified with the ``rpc/tcp'' or ``rpc/udp'' service type.
TCPMUX services must use ``tcp'', ``tcp4'', ``tcp6'' or ``tcp46''.
The wait/nowait entry specifies whether the server that is invoked by
inetd will take over the socket associated with the service access point,
and thus whether inetd should wait for the server to exit before
listening for new service requests. Datagram servers must use ``wait'',
as they are always invoked with the original datagram socket bound to the
specified service address. These servers must read at least one datagram
from the socket before exiting. If a datagram server connects to its
peer, freeing the socket so inetd can receive further messages on the
socket, it is said to be a ``multi-threaded'' server; it should read one
datagram from the socket and create a new socket connected to the peer.
It should fork, and the parent should then exit to allow inetd to check
for new service requests to spawn new servers. Datagram servers which
process all incoming datagrams on a socket and eventually time out are
said to be ``single-threaded''. Comsat(8), (biff(1)) and talkd(8) are
both examples of the latter type of datagram server. Tftpd(8) is an
example of a multi-threaded datagram server.
Servers using stream sockets generally are multi-threaded and use the
``nowait'' entry. Connection requests for these services are accepted by
inetd, and the server is given only the newly-accepted socket connected
to a client of the service. Most stream-based services operate in this
manner. Stream-based servers that use ``wait'' are started with the
listening service socket, and must accept at least one connection request
before exiting. Such a server would normally accept and process incoming
connection requests until a timeout. TCPMUX services must use
The maximum number of outstanding child processes (or ``threads'') for a
``nowait'' service may be explicitly specified by appending a ``/''
followed by the number to the ``nowait'' keyword. Normally (or if a
value of zero is specified) there is no maximum. Otherwise, once the
maximum is reached, further connection attempts will be queued up until
an existing child process exits. This also works in the case of ``wait''
mode, although a value other than one (the default) might not make sense
in some cases. You can also specify the maximum number of connections
per minute for a given IP address by appending a ``/'' followed by the
number to the maximum number of outstanding child processes. Once the
maximum is reached, further connections from this IP address will be
dropped until the end of the minute. In addition, you can specify the
maximum number of simultaneous invocations of each service from a single
IP address by appending a ``/'' followed by the number to the maximum
number of outstanding child processes. Once the maximum is reached,
further connections from this IP address will be dropped.
The user entry should contain the user name of the user as whom the
server should run. This allows for servers to be given less permission
than root. Optional group part separated by ``:'' allows to specify
group name different than default group for this user. Optional
login-class part separated by ``/'' allows to specify login class
different than default ``daemon'' login class.
The server-program entry should contain the pathname of the program which
is to be executed by inetd when a request is found on its socket. If
inetd provides this service internally, this entry should be
The server program arguments should be just as arguments normally are,
starting with argv, which is the name of the program. If the service
is provided internally, the service-name of the service (and any
arguments to it) or the word ``internal'' should take the place of this
Currently, the only internal service to take arguments is ``auth''.
Without options, the service will always return ``ERROR : HIDDEN-USER''.
The available arguments to this service that alter its behavior are:
Provide a fallback username. If the real ``auth'' service is
enabled (with the -r option discussed below), return this
username instead of an error when lookups fail for either socket
credentials or the username. If the real ``auth'' service is
disabled, return this username for every request. This is
primarily useful when running this service on a NAT machine.
-g Instead of returning the user's name to the ident requester,
report a username made up of random alphanumeric characters, e.g.
``c0c993''. The -g flag overrides not only the user names, but
also any fallback name, .fakeid or .noident files.
Specify a timeout for the service. The default timeout is 10.0
-r Offer a real ``auth'' service, as per RFC 1413. All the
remaining flags apply only in this case.
-i Return numeric user IDs instead of usernames.
-f If the file .fakeid exists in the home directory of the
identified user, report the username found in that file instead
of the real username. If the username found in .fakeid is that
of an existing user, then the real username is reported. If the
-i flag is also given then the username in .fakeid is checked
against existing user IDs instead.
-F same as -f but without the restriction that the username in
.fakeid must not match an existing user.
-n If the file .noident exists in the home directory of the
identified user, return ``ERROR : HIDDEN-USER''. This overrides
any fakeid file which might exist.
Use osname instead of the name of the system as reported by
The inetd utility also provides several other ``trivial'' services
internally by use of routines within itself. These services are
``echo'', ``discard'', ``chargen'' (character generator), ``daytime''
(human readable time), and ``time'' (machine readable time, in the form
of the number of seconds since midnight, January 1, 1900). All of these
services are available in both TCP and UDP versions; the UDP versions
will refuse service if the request specifies a reply port corresponding
to any internal service. (This is done as a defense against looping
attacks; the remote IP address is logged.) For details of these
services, consult the appropriate RFC document.
The TCPMUX-demultiplexing service is also implemented as an internal
service. For any TCPMUX-based service to function, the following line
must be included in inetd.conf:
tcpmux stream tcp nowait root internal
When given the -l option inetd will log an entry to syslog each time a
connection is accepted, noting the service selected and the IP-number of
the remote requester if available. Unless otherwise specified in the
configuration file, and in the absence of the -W and -w options, inetd
will log to the ``daemon'' facility.
The inetd utility rereads its configuration file when it receives a
hangup signal, SIGHUP. Services may be added, deleted or modified when
the configuration file is reread. Except when started in debugging mode,
inetd records its process ID in the file /var/run/inetd.pid to assist in
When given the -w option, inetd will wrap all services specified as
``stream nowait'' or ``dgram'' except for ``internal'' services. If the
-W option is given, such ``internal'' services will be wrapped. If both
options are given, wrapping for both internal and external services will
be enabled. Either wrapping option will cause failed connections to be
logged to the ``auth'' syslog facility. Adding the -l flag to the
wrapping options will include successful connections in the logging to
the ``auth'' facility.
Note that inetd only wraps requests for a ``wait'' service while no
servers are available to service requests. Once a connection to such a
service has been allowed, inetd has no control over subsequent
connections to the service until no more servers are left listening for
When wrapping is enabled, the tcpd daemon is not required, as that
functionality is builtin. For more information on TCP Wrappers, see the
relevant documentation (hosts_access(5)). When reading that document,
keep in mind that ``internal'' services have no associated daemon name.
Therefore, the service name as specified in inetd.conf should be used as
the daemon name for ``internal'' services.
RFC 1078 describes the TCPMUX protocol: ``A TCP client connects to a
foreign host on TCP port 1. It sends the service name followed by a
carriage-return line-feed <CRLF>. The service name is never case
sensitive. The server replies with a single character indicating
positive (+) or negative (-) acknowledgment, immediately followed by an
optional message of explanation, terminated with a <CRLF>. If the reply
was positive, the selected protocol begins; otherwise the connection is
closed.'' The program is passed the TCP connection as file descriptors 0
If the TCPMUX service name begins with a ``+'', inetd returns the
positive reply for the program. This allows you to invoke programs that
use stdin/stdout without putting any special server code in them.
The special service name ``help'' causes inetd to list TCPMUX services in
UNIX Domain Sockets
In addition to running services on IP sockets, inetd can also manage UNIX
domain sockets. To do this you specify a protocol of ``unix'' and
specify the UNIX domain socket as the service-name. The service-type may
be ``stream'' or ``dgram''. The specification of the socket must be an
absolute path name, optionally prefixed by an owner and mode of the form
:user:group:mode:. The specification:
creates a socket owned by user ``news'' in group ``daemon'' with
permissions allowing only that user and group to connect. The default
owner is the user that inetd is running as. The default mode only allows
the socket's owner to connect.
WARNING: while creating UNIX domain socket, inetd must change the
ownership and permissions on the socket. This can only be done securely
if the directory in which the socket is created is writable only by root.
Do NOT use inetd to create sockets in world writable directories, such as
/tmp, instead use /var/run or a similar directory.
Internal services may be run on UNIX domain sockets, in the usual way.
In this case the name of the internal service is determined using the
last component of the socket's pathname.
/etc/inetd.conf configuration file
/etc/rpc translation of service names to RPC program numbers
/etc/services translation of service names to port numbers
/var/run/inetd.pid the pid of the currently running inetd
Here are several example service entries for the various types of
ftp stream tcp nowait root /usr/libexec/ftpd ftpd -l
ntalk dgram udp wait root /usr/libexec/ntalkd ntalkd
telnet stream tcp6 nowait root /usr/libexec/telnetd telnetd
shell stream tcp46 nowait root /usr/local/sbin/rshd rshd
tcpmux/+date stream tcp nowait guest /bin/date date
tcpmux/phonebook stream tcp nowait guest /usr/local/bin/phonebook phonebook
rstatd/1-3 dgram rpc/udp wait root /usr/libexec/rpc.rstatd rpc.rstatd
/var/run/echo stream unix nowait root internal
The inetd server logs error messages using syslog(3). Important error
messages and their explanations are:
service/protocol server failing (looping), service terminated.
The number of requests for the specified service in the past minute
exceeded the limit. The limit exists to prevent a broken program or a
malicious user from swamping the system. This message may occur for
1. There are many hosts requesting the service within a short
2. A broken client program is requesting the service too
3. A malicious user is running a program to invoke the service in
a denial-of-service attack.
4. The invoked service program has an error that causes clients
to retry quickly.
Use the -R rate option, as described above, to change the rate limit.
Once the limit is reached, the service will be reenabled automatically in
service/protocol: No such user user, service ignored
service/protocol: getpwnam: user: No such user
No entry for user exists in the passwd(5) database. The first message
occurs when inetd (re)reads the configuration file. The second message
occurs when the service is invoked.
service: can't set uid uid
service: can't set gid gid
The user or group ID for the entry's user field is invalid.
setsockopt(SO_PRIVSTATE): Operation not supported
The inetd utility attempted to renounce the privileged state associated
with a socket but was unable to.
hosts_access(5), hosts_options(5), login.conf(5), passwd(5), rpc(5),
services(5), comsat(8), fingerd(8), ftpd(8), rlogind(8) (net/bsdrcmds),
rpcbind(8), rshd(8) (net/bsdrcmds), telnetd(8), tftpd(8)
Michael C. St. Johns, Identification Protocol, RFC 1413.
The inetd utility appeared in 4.3BSD. TCPMUX is based on code and
documentation by Mark Lottor. Support for ONC RPC based services is
modeled after that provided by SunOS 4.1. The FreeBSD TCP Wrappers
support first appeared in FreeBSD 3.2.
DragonFly 5.1 April 21, 2018 DragonFly 5.1